This is a mod i have been using by quite some time, thought i should share it with other users of Moto x4. it's mostly made by @defcomg and i have only done xml and module part. you can see this has 4032x 2268 video support, it's very useful as you can record 2268p video and use google photos app's video stabilization on it to get stabilized 4k video.this produces much better 4k stabilized videos because you have 5% more resolution to work on compared to using it on normal 2160p video.
Features:
1: 2268p video mode for back camera.
2. 4k video mode for front camera.
3. 16mp mode front cam support for other camera apps.
4. Increased audio and video bitrate.
5. 1080p30/60fps hevc video support.
Requirements:
1: Magisk v16 or later.(so obviously it needs bootloader unlocked)
2: FreeDCam camera app play-store link
How to : -
1: Just install Enhance_MOTO_X4_camera.zip as a module in MagiskManager and reboot.
2: Open FreeDCam take a picture (so that it can create a freedcam folder otherwise you will get crashes in video mode) and follow attached screenshots to setup 2268p profile.
Credits: - @defcomg Donation Link .
Download : -
1. Enhance_MOTO_X4_camera.zip
2. Camera_ MX (incase someone wants fully working gcam)
13-14 downloads but not a single comment on how bad/good/working/not working it is ? this community is really dead lol.
Can I use this module on z2 force?
darthxa said:
Can I use this module on z2 force?
Click to expand...
Click to collapse
nope. it's only for X4.
Hi,
It is possible to use it when the photo is rooted using supersu ?
Thank you.
bibiboss said:
Hi,
It is possible to use it when the photo is rooted using supersu ?
Thank you.
Click to expand...
Click to collapse
magisk module doesn't work with supersu, so no.
This is great! Trying to find a way to get less compression in photos, just installed and poking around!
How does this compare to the various Gcam mods out there? Does this lose any features from the stock camera? Does it improve shutter speed?
Zarxrax said:
How does this compare to the various Gcam mods out there? Does this lose any features from the stock camera? Does it improve shutter speed?
Click to expand...
Click to collapse
this mod doesn't remove anything, only adds the features stated in op.
So does this improve the moto camera or just provide a better alternative? Also is this mod just for video improvement or photos as well. The Moto X4 camera is very disappointing to say the least. I have been using a modded version of the GCam and it is much faster and better quality than the moto camera but features like the wide angle are sacrificed.
Works Excellent...thanks...
SchmilK said:
This is great! Trying to find a way to get less compression in photos, just installed and poking around!
Click to expand...
Click to collapse
can you share some 4k footage from the front camera with open camera app from the play store? see i'm trying to start a youtube channel and i want to record from open camera because of its amazing mono mode for the audio.. also share some images from arnova's gcam with front 16mp if u can.. i will highly appreciate it! ??
---------- Post added at 11:41 AM ---------- Previous post was at 11:28 AM ----------
kraatus90 said:
this mod doesn't remove anything, only adds the features stated in op.
Click to expand...
Click to collapse
can open camera app from the play store utilize the whole front 16mp after this mod? if yes then can you please share a sample footage with me? i really need to know this for my youtube channel but i'm skeptical on rooting just for testing out this one thing.. i'd really appreciate your help if you've got some time.. thanks! ??
It does not work in Los16 ...
kraatus90 said:
This is a mod i have been using by quite some time, thought i should share it with other users of Moto x4.
Click to expand...
Click to collapse
Is it possible to use 16MP on GCam after flashing this module?
kraatus90 said:
13-14 downloads but not a single comment on how bad/good/working/not working it is ? this community is really dead lol.
Click to expand...
Click to collapse
Pls share on telegram group as well people are active on telegram than xda nowadays
No Pie support
Doesn't work on stock Pie (bootloader unlocked, magisk installed). After installing, all cameras just crash.
noone4nothing said:
Doesn't work on stock Pie (bootloader unlocked, magisk installed). After installing, all cameras just crash.
Click to expand...
Click to collapse
Unfortunately this does not work on Android 9.
Sent from my Moto X4 using XDA Labs
MotoX4Custom said:
Unfortunately this does not work on Android 9.
Sent from my Moto X4 using XDA Labs
Click to expand...
Click to collapse
Would it be possible to port it to Pie?
By the way, if anyone is wondering, this mod works fine on Oreo 8.1 as well as 8.0.
noone4nothing said:
Would it be possible to port it to Pie?
By the way, if anyone is wondering, this mod works fine on Oreo 8.1 as well as 8.0.
Click to expand...
Click to collapse
I think it would be good if it would be ported for pie. But I'm not a developer and unfortunately I can not. I hope somebody does it.
Related
Hi,
It's a Google camera with working HDR+ for almost all nougat devices.
I've personally tested on NOS and Viper OS and let me know for others.
Disclamier - This is not my work I'm just sharing it for you all to enjoy the camera of our Redmi Note 3.
Link - https://drive.google.com/file/d/0B8-sZ7NYpli5YTQwMkotdExqQlk/view?usp=drivesdk
Screenshots and image
It's working perfectly with NOS and superb picture quality than stock cam hdr
It's lit. ?
Working very good for me in Nexus Experience 11.1 (rarely crash)
Enviado desde mi Redmi Note 3 mediante Tapatalk
Crashes sometimes, but man it makes a world of difference.
Works great on PA and Omni
Great camera working on viper os... Thanks dude
never thought that rn3 can take such good pics at low light.. Can u provide the link where u found this apk development..
Working on Pure Nexus. Thanks for sharing it.
I am using google camera that i downloaded on Apk Miror. But it does not have HDR+, i thought that hdr on gg cam just supports google phones. With your gg cam you gave, i can use HDR+ now. It is incredible with me. How could u find it? Thanks. I will share it to Vietnamese users. I know they need it so much
I did the same as you did. Wonder how it's working in this app. Very thankful to dev.
Hi ,
Thanks for the share! Works well. Any idea if they can enable 60fps ? Have seen other versions on Reddit with 60fps enabled
I am running latest Xiaomi.eu ROM with camera2 api enabled but the app crashes. What do? Dont want to flash LOS
mesologgi said:
I am running latest Xiaomi.eu ROM with camera2 api enabled but the app crashes. What do? Dont want to flash LOS
Click to expand...
Click to collapse
I think that google camera 4.4 just supports android 7.1.x or above
Please provide the link for original development thread
Difference only with HDR on?
Does not seem to focus
Very GOOD!
Can you make a flashed ZIP to replace the stock camera?
Shattered Memories said:
Very GOOD!
Can you make a flashed ZIP to replace the stock camera?
Click to expand...
Click to collapse
No I can't as I don't know how to do that
cmglng said:
Please provide the link for original development thread
Click to expand...
Click to collapse
I can't as I found it in a telegram group
mesologgi said:
I am running latest Xiaomi.eu ROM with camera2 api enabled but the app crashes. What do? Dont want to flash LOS
Click to expand...
Click to collapse
Sorry works with only nougat roms
shamalh said:
Hi ,
Thanks for the share! Works well. Any idea if they can enable 60fps ? Have seen other versions on Reddit with 60fps enabled
Click to expand...
Click to collapse
No you can't Camera NX will do this job for 60fps recording
ho�ng ng said:
I am using google camera that i downloaded on Apk Miror. But it does not have HDR+, i thought that hdr on gg cam just supports google phones. With your gg cam you gave, i can use HDR+ now. It is incredible with me. How could u find it? Thanks. I will share it to Vietnamese users. I know they need it so much
Click to expand...
Click to collapse
I got this from a telegram group
vinay3698 said:
never thought that rn3 can take such good pics at low light.. Can u provide the link where u found this apk development..
Click to expand...
Click to collapse
I got this apk from telegram group
The module for magisk to record in 60fps and 30fps without jerks and focus jumps in Google Camera. Only for 3/32 models (holitech ov13855 module)
Stabilization at 60fps is disabled, otherwise a wild zoom. At 30 fps, stabilization normally works.
For many thanks
kawr
mrz1990
Does this work on pie roms?
farhanshaikh671 said:
Does this work on pie roms?
Click to expand...
Click to collapse
not tested ,
arvs47 said:
not tested ,
Click to expand...
Click to collapse
I tested it only in pie. but on stock rom it maybe works.
If you need someone, I can give a mod for 30 without a jumping focus
morozik90 said:
I tested it only in pie. but on stock rom it maybe works.
If you need someone, I can give a mod for 30 without a jumping focus
Click to expand...
Click to collapse
Yes give, is it available for hynix sensor, bcz when i am recording videos through gcam focus is jumping..
Poison-Fang said:
Yes give, is it available for hynix sensor, bcz when i am recording videos through gcam focus is jumping..
Click to expand...
Click to collapse
its only for ov13855 13mp. because I only have it in my hands)
and I updated it already) while everything is in test mode
not recording...
after installing this module my cam and gcam won't recording videos, but still can take photos, does this 60fps really work, it will be super cool if it does, is there something i missed? my m1 is alredy rooted, cam2api enabled. please help. thankyou
Testing
Doesn't work for me too.
Stock rooted with magisk.
Infact camera can't shoot videos at all.
Tried arnova gcam 5 and gcam 6 also
ucha666 said:
after installing this module my cam and gcam won't recording videos, but still can take photos, does this 60fps really work, it will be super cool if it does, is there something i missed? my m1 is alredy rooted, cam2api enabled. please help. thankyou
Click to expand...
Click to collapse
hello ... why does it not working ?
Try this. Works on zb602kl 13mp. Tested on PE. 60fps not stable. only with good lighting
https://drive.google.com/file/d/1jFhU8ED8NA9PU9HH0Gh-AtLERb9CRjBs/view?usp=drivesdk
Still not working. My magisk cannot selected the zip that i just download. Or should flash ot from twrp?
how to revert back to the normal i flashed this module through twrp?
For those it didn't work check out with the camera module you have it only works with specific module
...SCROLL DOWN FOR UPDATE...
Here is a Camera Mod for the V20. I am pretty sure it may work with all varients.
Works on Nougat 7.0, not sure about others.
This Magisk Module Enables your Cam to record at TOP QUALITY!
- 4K @ 100Mbps / Audio @ 420Kbps
...all systemlessly.
----OR:----
There is Now another as well (the "v.2" )for 75Mbps instead of 100Mbps for those that feel 100Mbps is not in "Cam-Reality" needed for top quailty. Also takes less storage space.. All in all, you decide.
Enjoy
----------Update 2/22/19----------
Here are two more Magisk Modules I created that allow a difference between 100Mbps & 75 Mbps per version. Both include some new mods such as enhanced codecs and more that are better decribed in per module description. These versions that have these changes are "v.3" (100 Mbps + other mods) & "v.4" (75 Mbps + other mods)
----------Update (5/28/19) {By request }
This new v.5 has "75-76Mbps for "Manual Cam mode" now. Shows 64Mbps in cam, but is 75-76Mbps in details. This however applies 75-76Mbps to all/everything in cam. Only way I could get it to work. Also might break "Steady Recording" if toggled on.
Enjoy and thank you for using my Magisk based Mods
Thanks for the mod! I have to ask, does your slow-mo still work in the stock cam with this mod?
There was a media_profiles file that was floating around somewhere in the V20 threads, but it made slow-mo more of a stop motion. Thinking it had something to do with FPS or something.
jl10101 said:
Thanks for the mod! I have to ask, does your slow-mo still work in the stock cam with this mod?
There was a media_profiles file that was floating around somewhere in the V20 threads, but it made slow-mo more of a stop motion. Thinking it had something to do with FPS or something.
Click to expand...
Click to collapse
No prob . When I tested, all extra features worked.
Slowmo still has no audio when slowed in viewing though because of lg dumb decision on that.
New module choice added
i95swervin said:
I'll check this out later today thanks for sharing @Mysticblaze347
Click to expand...
Click to collapse
I do what I can.
Mysticblaze347 said:
I do what I can.
Click to expand...
Click to collapse
The camera app still shows 52mbps is it at 75 and just not showing correctly.
aygross1929 said:
The camera app still shows 52mbps is it at 75 and just not showing correctly.
Click to expand...
Click to collapse
I'm on stock cam..V20/V30 cams. Not sure what cam u are on. I tested the mods and they both work.
This is the 75Mbps one. Bitrate shows via vidtrim app. Also the 100Mbps. Also want to point out that this is tested in Auto mode in stock V20/V30 cam apps, not Manual or Special Modes.
New Final Update in main download area of this thread.
Will this work on Resurrection Remix or is this mod only for stock based ROMS?
•Vanilla• said:
Will this work on Resurrection Remix or is this mod only for stock based ROMS?
Click to expand...
Click to collapse
I can only varify for stock based. It might work for RR. Just do a backup and a then test it. Might work. I just can't test because I'm on stock based.
Hello, thanks for the work. The mod lets me shoot in 420Kbs aac audio but nothing changes in video. Still in 64Mbps 4k 30fps.
I'm using the camera improvements mods by @helf. I don't know if these are incompatible with your mod, @Mysticblaze347
Thank you
Sorry, I realized 100Mbps is in Auto video mode. Any chance to have 100Mbps in Manual Mode? THANK YOU
quearte said:
Sorry, I realized 100Mbps is in Auto video mode. Any chance to have 100Mbps in Manual Mode? THANK YOU
Click to expand...
Click to collapse
Haven't been able to figure out for that yet. If I do I will update.
100 Mbps is kinda overkill anyway. I personally use the 75. But its user decided ?
quearte said:
Hello, thanks for the work. The mod lets me shoot in 420Kbs aac audio but nothing changes in video. Still in 64Mbps 4k 30fps.
I'm using the camera improvements mods by @helf. I don't know if these are incompatible with your mod, @Mysticblaze347
Thank you
Click to expand...
Click to collapse
The helf mods only allow 75mbps that I am aware of from testing before
Mysticblaze347 said:
The helf mods only allow 75mbps that I am aware of from testing before
Click to expand...
Click to collapse
Nope, the helf mods save 64Mbps manual videos. As stock.
quearte said:
Nope, the helf mods save 64Mbps manual videos. As stock.
Click to expand...
Click to collapse
Sorry, ment 75 max allowed with his mod for auto mode. Manual mode uses some other form for bitrate as to why these mods so far don't change for manual mode. I have yet to find what and why. Maybe one day I or someone will figure out as to why.
I have not adjusted anything related to bitrates etc with mine since that is generally just in the media profile configs.
I am, however, working on increasing the slo-mo frame rate, enabling 4MP 1080P etc. So these higher bitrates will help a LOT
Do you care if I integrate these with my mod @mystic?
I have had a rough 6 months so have been MIA on here but things are getting back to normal so I hope to finally have another release out with official oreo support.
helf said:
I have not adjusted anything related to bitrates etc with mine since that is generally just in the media profile configs.
I am, however, working on increasing the slo-mo frame rate, enabling 4MP 1080P etc. So these higher bitrates will help a LOT
Do you care if I integrate these with my mod @mystic?
I have had a rough 6 months so have been MIA on here but things are getting back to normal so I hope to finally have another release out with official oreo support.
Click to expand...
Click to collapse
Permission granted ?. I was wondering something. Do you have a change log for your last two Nougat downloadable mods?. I would like to use, but seen last one talking HDR video removed ect. That kinda stopped me because I do HDR converting via Auto or Cine-log on V30 port (if I remember to flip). I can't go to Oreo because I'm on ls997. Root is a no go after Nougat for this. The Cine-log mod had a odd greenish hue on my end.
Sorry for the long reply.
Mysticblaze347 said:
Permission granted ?. I was wondering something. Do you have a change log for your last two Nougat downloadable mods?. I would like to use, but seen last one talking HDR video removed ect. That kinda stopped me because I do HDR converting via Auto or Cine-log on V30 port (if I remember to flip). I can't go to Oreo because I'm on ls997. Root is a no go after Nougat for this. The Cine-log mod had a odd greenish hue on my end.
Sorry for the long reply.
Click to expand...
Click to collapse
Sure I'll do that tomorrow. I'm also on an ls997 so well be on nougat forever. Which, tbh, I'm fine with.
Also, thanks
Cinelog *will* have an odd hue as it is logarithmic gamma instead of linear. It's only for use with editing. Otherwise it wont look right.
helf said:
Sure I'll do that tomorrow. I'm also on an ls997 so well be on nougat forever. Which, tbh, I'm fine with.
Also, thanks
Cinelog *will* have an odd hue as it is logarithmic gamma instead of linear. It's only for use with editing. Otherwise it wont look right.
Click to expand...
Click to collapse
Looking forward to checking out new update as well, if able for Nougat. Unless you ment it will also support Oreo. Either way ?.
Hey there guys, i have 9.0 pixel experience ROM on my RN4. Camera2api enabled.
I don't know which version of gcam i am currently using but it gives a lot of force close errors and a green tint on front cam too.
I tried a lot of apps to know whether I've a Samsung or Sony sensor in it, but to no avail.
Would you please be so kind as to point me to the best gcam version suitable for my device right now?
Thank you so much kind stranger.
https://forum.xda-developers.com/re...h-hdr-mido-t3656196/post77606695#post77606695
NO FC's, no green tint, portrait works, HDR works for both front and back and you can choose bitrate for video recording, using it for months and never looked back.
To avoid issues first fully remove old gcams you have installed.
Also i recommend flashing this magisk modules: https://drive.google.com/drive/u/0/folders/1RkHruqNGIKnkgfhX0B7BaeEGYc-airBc
It will let you record in [email protected], fixes distorted sound in video recordings and enables 30fps in viewfinder. (it works for Samsung / Sony, not sure about Omnivision)
To check which sensor you have just run some logcat reader, open gcam and shoot few pics, look for sensor info in log.
What is gcam? Can anyone explain.
james.brownn said:
What is gcam? Can anyone explain.
Click to expand...
Click to collapse
Gcam stands for Google Camera. That's camera app from Google and it is originally found on Google (Pixel, etc.) devices. However, when using it on other phones, it can significantly improve photo quality in comparison to what stock camera and other available alternatives on the market can achieve. That's because Google Camera relies heavily on "clever" software and superior photo processing algorithms capable of generating and preserving more data. So even hardware-wise "bad cameras" can benefit from using it. Of course there are some downsides as well, since the app is not designed to be run on other - non Google - devices you need modified version of it in order to use it. That said there are many different modifications of said application with variuos degrees of functionality, bugs and stability. You can check most of them collected here.
k3lcior said:
https://forum.xda-developers.com/re...h-hdr-mido-t3656196/post77606695#post77606695
NO FC's, no green tint, portrait works, HDR works for both front and back and you can choose bitrate for video recording, using it for months and never looked back.
To avoid issues first fully remove old gcams you have installed.
Also i recommend flashing this magisk modules: https://drive.google.com/drive/u/0/folders/1RkHruqNGIKnkgfhX0B7BaeEGYc-airBc
It will let you record in [email protected], fixes distorted sound in video recordings and enables 30fps in viewfinder. (it works for Samsung / Sony, not sure about Omnivision)
To check which sensor you have just run some logcat reader, open gcam and shoot few pics, look for sensor info in log.
Click to expand...
Click to collapse
Hallo my friend.
I have RN4 with lineage 14.1 and instal that gcam that you prefer.
Works perfect .
I dont want to root so i am not have magisk.
Can you say to me for best setup ?
Front back samsung sensors.
Thank you by advance.
papsr6 said:
Hallo my friend.
I have RN4 with lineage 14.1 and instal that gcam that you prefer.
Works perfect .
I dont want to root so i am not have magisk.
Can you say to me for best setup ?
Front back samsung sensors.
Thank you by advance.
Click to expand...
Click to collapse
It's already setup, just enable manual focus stuff, disable noise supression and set video recording bitrate. (i use 30mbps)
k3lcior said:
It's already setup, just enable manual focus stuff, disable noise supression and set video recording bitrate. (i use 30mbps)
Click to expand...
Click to collapse
Thank you so much.
k3lcior said:
It's already setup, just enable manual focus stuff, disable noise supression and set video recording bitrate. (i use 30mbps)
Click to expand...
Click to collapse
I upgrad to lineage 15.1 and install your gcam and all works perfect except video.
Expain....the video preview is dark with low lighting.
Have you an idea witch is the fix?
papsr6 said:
I upgrad to lineage 15.1 and install your gcam and all works perfect except video.
Expain....the video preview is dark with low lighting.
Have you an idea witch is the fix?
Click to expand...
Click to collapse
You can try this: BOLTiSHok_superFPS-vendor.zip
k3lcior said:
You can try this: BOLTiSHok_superFPS-vendor.zip
Click to expand...
Click to collapse
You are the best my friend.works great.
Have a nice day or night...i dont know where you are....ha ha ha.
Hey everyone this would probably be my comeback for posting a thread after like 5 years. and previously i did some development for Samsung's Galaxy Core 2 G355H and after that i got myself a oneplus 3.
Now coming on to the Topic. I have been feeling that the stock Oneplus Camera encoder is taking way too much space as it should because it uses H264 encoder. and i suddenly felt that i have to do something about it.
So i searched through the internet. and found that it is not availabe for Pie though it was available for Oreo here.
but then that thread got me an idea and i edited the xml file myself and made it work.
This module enable HEVC/H265 video recording on OnePlus 3 and OnePlus 3T.
The bitrate values are the same as original.
The audio codec it's still AAC and the audio bitrate is doubled to 192kbps.
For Half bitrate i ll use heaac which uses less space without losing quality
Why should I use HEVC instead of H264?
Basically, HEVC provide the same quality as H264, but using half the bitrate, this means that you can record videos with the same quality but using less space, or, if you're more inclined to that, record video that use the same space but with better quality (less compression, therefore less artifacts and more details overall). [Credit- @eathtespagheti]
More info about HEVC on Wikipedia
Stock Video Stock Audio changelog
Code:
v0.1
- Initial release
v0.2
- changed to stock audio bitrate
Stock Bitrate changelog:
Code:
v0.1
- Initial release
v0.2
- Some Fixes and Improvements
v0.3
- Added support for Oneplus 5/5T
- Added stock video and stock audio alternative
Half Bitrate changelog:
Code:
v0.1
- Initial Release
bug- 1080p 60fps not working
v0.2
- Added support for Oneplus 5/5T
- 1080p 60fps is now working but with stock bitrate
Will it work for op5 pie version ?
Sent from my OnePlus5 using XDA Labs
anujyadava said:
Will it work for op5 pie version ?
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
i dont know but it should as the nougat and oreo version is unified for op3 and op5 so give it a try and tell me if it works
Dhruvit Pokharna said:
Hey everyone this would probably be my comeback for posting a thread after like 5 years. and previously i did some development for Samsung's Galaxy Core 2 G355H and after that i got myself a oneplus 3.
Now coming on to the Topic. I have been feeling that the stock Oneplus Camera encoder is taking way too much space as it should because it uses H264 encoder. and i suddenly felt that i have to do something about it.
So i searched through the internet. and found that it is not availabe for Pie though it was available for Oreo here.
but then that thread got me an idea and i edited the xml file myself and made it work.
This module enable HEVC/H265 video recording on OnePlus 3 and OnePlus 3T.
The bitrate values are the same as original.
The audio codec it's still AAC and the audio bitrate is doubled to 192kbps.
For Half bitrate i ll use heaac which uses less space without losing quality
Why should I use HEVC instead of H264?
Basically, HEVC provide the same quality as H264, but using half the bitrate, this means that you can record videos with the same quality but using less space, or, if you're more inclined to that, record video that use the same space but with better quality (less compression, therefore less artifacts and more details overall). [Credit- @eathtespagheti]
More info about HEVC on Wikipedia
Stock Bitrate changelog:
Half Bitrate changelog:
Click to expand...
Click to collapse
Thanks for the credits, appreciated! Hahah
anujyadava said:
Will it work for op5 pie version ?
Click to expand...
Click to collapse
There's already a specific version for OP5 iirc, search on the forum
Would you be able to create a version which uses
Stock bit rate for both video and audio? I see there's a version with stock video bitrate, but higher audio bitrate.
I am on oneplus 5t.
azrash said:
Would you be able to create a version which uses
Stock bit rate for both video and audio? I see there's a version with stock video bitrate, but higher audio bitrate.
I am on oneplus 5t.
Click to expand...
Click to collapse
sure ,in an hour i ll upload
azrash said:
Would you be able to create a version which uses
Stock bit rate for both video and audio? I see there's a version with stock video bitrate, but higher audio bitrate.
I am on oneplus 5t.
Click to expand...
Click to collapse
Done!
Does it work on Android 10 and does it fix slow-mo cam like the other HEVC enabler?
Couchy said:
Does it work on Android 10 and does it fix slow-mo cam like the other HEVC enabler?
Click to expand...
Click to collapse
nope, this is mainly for oxygen os based on pie. slow-mo in gcam isnt necessary as it is working on oxygen camera.
and i dont know if there is any mod to make slow mo work on gcam, if there is give me a link and i will include it.
Nice work bro!
I remember you from the SM-G355, nice phone xD
For slowmotion...
SlowMo on gcam works if you use the libs of Nougat and manually place it in the system (for android 10) or if you use MagiskModule (for Android 9 and 8).
I upload the module and the zip i use in Ten ROMs
View attachment slowmotionFix_ten.zip
View attachment OnePlus_3_3T_Slow_Motion_Fix-v2.0.1(8).zip
Hello. Just stumbled over your thread. I'm using a ZUK Z2 Plus and wanted to know if it would be possible to make this enabler working for my phone. Thanks for your work.
Cheers!
GonicTEAM said:
SlowMo on gcam works if you use the libs of Nougat and manually place it in the system (for android 10) or if you use MagiskModule (for Android 9 and 8).
I upload the module and the zip i use in Ten ROMs
Click to expand...
Click to collapse
I flashed your Ten zip on a ten rom with latest gcam (version 7.3.020 v1.1c TlnNeun) but it doesn't work.
Latest Paranoid Android Q. 3T
deathbreath2010 said:
Hello. Just stumbled over your thread. I'm using a ZUK Z2 Plus and wanted to know if it would be possible to make this enabler working for my phone. Thanks for your work.
Cheers!
Click to expand...
Click to collapse
give me your /system/vendor/etc/media_profiles_vendor.xml and i will make magisk module for you.
GonicTEAM said:
Nice work bro!
I remember you from the SM-G355, nice phone xD
Click to expand...
Click to collapse
Thanks So much bro, didn't think anyone would remember me. means a lot!
Dhruvit Pokharna said:
give me your /system/vendor/etc/media_profiles_vendor.xml and i will make magisk module for you.
Click to expand...
Click to collapse
Thanks a lot! I uploaded the file located in system/vendor/etc to my gdrive
https://drive.google.com/file/d/10ah-LZwAd4d_H9N2MvlJUiAcJhYgpXDM/view?usp=sharing
Cheers!
deathbreath2010 said:
Thanks a lot! I uploaded the file located in system/vendor/etc to my gdrive
https://drive.google.com/file/d/10ah-LZwAd4d_H9N2MvlJUiAcJhYgpXDM/view?usp=sharing
Cheers!
Click to expand...
Click to collapse
this is isnt media_profiles_vendor.xml and the file you gave i dont think is gonna work.
Dhruvit Pokharna said:
this is isnt media_profiles_vendor.xml and the file you gave i dont think is gonna work.
Click to expand...
Click to collapse
Hmm. But that is the only file with media profiles in its name located in vendor. Thanks anyway.
Cheers
deathbreath2010 said:
Hmm. But that is the only file with media profiles in its name located in vendor. Thanks anyway.
Cheers
Click to expand...
Click to collapse
i ll try with this, so you can try and tell me if it works
deathbreath2010 said:
Hmm. But that is the only file with media profiles in its name located in vendor. Thanks anyway.
Cheers
Click to expand...
Click to collapse
here