Related
So I am trying to make a tool to use with the LG Ally for root and recovery, kind of like Unrevoked. All commands necessary can be done via ADB, all resources including adb can be placed in a resource folder.
I am having very frustrating issues as the Ally doesn't have Root on auto via adb, and adb root doesnt work properly. So I started using a batch file and fan into problems where when I issue adb shell su the script gets "stuck" in the shell and wont accept any input until the su shell terminates. If I adb shell su then close the window, the su permissions are NOT preserved.
I have moved on to visual basic, so I have a little more control, but I cannot for the life of me find out how to successfully pass commands to the shell the best I can do is open new shells for each command which is no good.
I know Im missing something and I know its something simple I just cant for the life of me figure it out
ok so I made a media player which is written in c# and it passes commands to adb...I can show you how to talk to shell via c# if you want.
Ok s how are you writing to shell one by one? Are you using a stream writer to a process?
At this point the commands are issued one by one.
I just installed vb 2k8, I think my problems lye in the deprecation of vb6 commands
Code:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Shell("C:\android-sdk-windows\tools\adb.exe shell su")
SendKeys.Send("ls")
SendKeys.Send("{ENTER}")
End Sub
End Class
Im trying to keep it simple for now. This code will open up 2 cmd windows for some reason. and it doesnt pass the SendKeys.Send keys, I just end up with 2 cmd windows sitting at the #.
If I Shell("CMD.EXE") and try running adb commands with sendkeys, the keys sent will be jarbled, it moves around my keys (I would imagine because / is an escape char?)
I havent mucked about with vb in a few years so sorry for my noobism, Im good at bash scripting but this is very counter-intuitive
ok that is a bad way of doing it...no offense
Anyway, here's the proper way of sending shell commands one by one and getting back output...
objProcess = New System.Diagnostics.Process()
objProcess.StartInfo.FileName = ProcessPath
objProcess.StartInfo.WindowStyle = ProcessWindowStyle.Normal
objProcess.Start()
and you set processpath to be "cmd"
and you say objprocess.standardinput.writeline("whatever command you want")
and you say objprocess.standardoutput.readline() to return a string which you can display in a messagebox by saying "msgbox(string)"
-Hope this helps
None taken, my VB is weak like the ukraine, Im just trying to make a copy of my tool for windows, since most people use it. Thatsnks for the tips Im on the right track now, I think.
It is however giving me some trouble with objProcess.StandardInput.WriteLine...
Code:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objProcess = New System.Diagnostics.Process()
objProcess.StartInfo.FileName = "cmd"
objProcess.StartInfo.WindowStyle = ProcessWindowStyle.Normal
objProcess.Start()
objProcess.StandardInput.WriteLine("echo TEST")
End Sub
End Class
its still super simple in testing mode. This when ran gives me the error "StandardIn has not been redirected." Thanks for the help im currently researching to see if I can figure it out. If you have any more ideals let me know
Got it, thanks
heres is the working code for a test I did
Code:
Public Class Form1
Private WithEvents objProcess As Process
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
objProcess = New Process
objProcess.StartInfo.FileName = "cmd"
objProcess.StartInfo.WindowStyle = ProcessWindowStyle.Normal
objProcess.StartInfo.RedirectStandardInput = True
objProcess.StartInfo.UseShellExecute = False
objProcess.StartInfo.RedirectStandardOutput = True
objProcess.Start()
objProcess.StandardInput.WriteLine("C:\android-sdk-windows\tools\adb.exe kill-server")
objProcess.StandardInput.WriteLine("C:\android-sdk-windows\tools\adb.exe start-server")
objProcess.StandardInput.WriteLine("C:\android-sdk-windows\tools\adb.exe shell su")
objProcess.StandardInput.WriteLine("C:\android-sdk-windows\tools\adb.exe shell mkdir /sdcard/TEST")
End Sub
End Class
If it's useful, I have a technique to start an app, then to call the app again from the command line.
If the app is still running, it will process the command line. If it's not running, it simply launches a new instance and then processes the command line.
Let me know if you can use it.
Cheers
You Guys should look at the AndroidLib.dll it has adb/fastboot and device libraries already so you can just package 1 exe in your distro without the need to include or reference Adb and fastboot directly. Here is an example of a Form Button to reboot in to the bootloader.
Code:
private void button1_Click(object sender, EventArgs e)
{
AdbCommand adbrebootCmd = Adb.FormAdbCommand(device, "reboot bootloader");
Adb.ExecuteAdbCommand(adbrebootCmd);
android.Dispose();
}
The library also allows you to send AdbShell commands with Root access.
Really useful.
my phone was not rooted and i wanted the new gb official build so i installed it and now i want t go back to froyo how do you do this on a mac
Even though its a Mac cant you run things in a Dos like mode with c:\ prompt?
Even though its a Mac cant you run things in a Dos like mode with c:\ prompt?
Google came up with this
I looked FOREVER for these instructions. While I didn't write them, they definitely worked for me:
- Download the Android SDK for Macintosh at: Android SDK | Android Developers
- Extract it
- Download Fastboot for OSX (If not included with SDK)
- Extract fastboot and place it in your /tools folder.
- Open up a terminal window
- type: pico .bash_profile (this will create a .bash_profile)
- type the following in the new screen: export PATH=$
{PATH}:<sdkfolder>/tools
- Hit CNTRL + X
- Hit Y (for yes to save)
- It will return you to the terminal screen… type: exit
- Restart terminal.
- Then you can use your adb commands like you would on a PC. To test this, plug your device in (make sure its in debugging mode), then type "adb devices" in the new terminal window. It should show up with a number. This means you are good to go.
blueis300 said:
Even though its a Mac cant you run things in a Dos like mode with c:\ prompt?
Click to expand...
Click to collapse
A better statement is he can run things like you would on linux, because osx has a bash terminal built in. Type "terminal" into finder. Sadly, most osx people have no clue that exists, which is sad because it's not a hackjob like cmd.exe.
ok i got all the way to the last step and the terminal window keeps saying: -bash: adb: command not found and -bash: sdkfolder: No such file or directory
blueis300 said:
Even though its a Mac cant you run things in a Dos like mode with c:\ prompt?
Google came up with this
I looked FOREVER for these instructions. While I didn't write them, they definitely worked for me:
- Download the Android SDK for Macintosh at: Android SDK | Android Developers
- Extract it
- Download Fastboot for OSX (If not included with SDK)
- Extract fastboot and place it in your /tools folder.
- Open up a terminal window
- type: pico .bash_profile (this will create a .bash_profile)
- type the following in the new screen: export PATH=$
{PATH}:<sdkfolder>/tools
- Hit CNTRL + X
- Hit Y (for yes to save)
- It will return you to the terminal screen… type: exit
- Restart terminal.
- Then you can use your adb commands like you would on a PC. To test this, plug your device in (make sure its in debugging mode), then type "adb devices" in the new terminal window. It should show up with a number. This means you are good to go.
Click to expand...
Click to collapse
ok i got all the way to the last step and the terminal window keeps saying: -bash: adb: command not found and -bash: sdkfolder: No such file or directory
Has anybody got a Sony Tablet S being recognised by adb?
It seems to be blocked :-(
And yes, I have done all the usual enable USB debugging etc...
I can not use it for development :-(
---------- Post added at 12:56 PM ---------- Previous post was at 12:06 PM ----------
Managed to sort it myself
you need to cd to your .android folder (on a mac, this is ~/.android) and then type
echo 0x054c > adb_usb.ini
Where 0x054c is the vendor id for Sony (I got that by looking at the attached evices in the 'About this mac' preferences)
Now adb sees the device - woohoo
would this apply if i just wanted to use it to transfer music and such? I am not incredibly savy with coding but i tried to enable debugging and all that. I am justnot sure whats the problem.
No, the Android File Transfer program still works without this
Good to know it can be used to dev on. Anyone have any information on how to send data out using the IR blaster, I dont think there is support for it in the native android libraries from what I can see?
The following procedure has confirmed that ubuntu 11.04.
The following procedure has confirmed that ubuntu 11.04.
1. Enable debug mode for sony tablet S
2. Add line /etc/udev/rules.d/51-android.rules
SUBSYSTEM=="usb", ATTR{idVendor}=="054c", MODE="0666", GROUP="plugdev"
3. Change file mode
sudo chmod a+r /etc/udev/rules.d/51-android.rules
4. Add line idVendor to ~/.android/adb_usb.ini
0x054C
5. adb kill-server ; sudo adb start-server
6. finish!
Kaz Taguchi said:
The following procedure has confirmed that ubuntu 11.04.
1. Enable debug mode for sony tablet S
2. Add line /etc/udev/rules.d/51-android.rules
SUBSYSTEM=="usb", ATTR{idVendor}=="054c", MODE="0666", GROUP="plugdev"
3. Change file mode
sudo chmod a+r /etc/udev/rules.d/51-android.rules
4. Add line idVendor to ~/.android/adb_usb.ini
0x054C
5. adb kill-server ; sudo adb start-server
6. finish!
Click to expand...
Click to collapse
I don't seem to have that file
I had done all the other steps in order to mount the tablet and copy files over (which works great).
Does anyone have issues with Sony's Music player failing to update the database? Music appears in the native Music app correctly but nothing in the Sony one
Found a way on Windows!
With the help of the vendor ID from above and the following article on generic Tegra Tablets, was able to get it to show up on Windows!
(Copied from addictivetips)
1.You must have Android SDK installed before you can proceed. If you don’t have it already, proceed to our guide on what is ADB and how to install it. Make sure you download the Google USB Driver Package as well.
2.Open the google-usb_driver folder that you will find inside your Android SDK folder.
3.Open the android_winusb.inf file in notepad or any text editor to edit it.
4.Add these lines under [Google.NTx86] or [Google.NTamd64] depending on whether you are using 32 bit or 64 bit Windows. If unsure, it is safe to add these under both these sections. ;NVIDIA Tegra
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
%CompositeAdbInterface% = USB_Install, USB\VID_0955&PID_7100&MI_01
Don’t edit or replace any other text that is already there; just add these new lines and save the file.
5.Open a command prompt window and enter this command: echo 0x054C >> "%USERPROFILE%\.android\adb_usb.ini"
Note: this is where you have to use 0x054C instead of what is at the link, otherwise it wont work
Now your Android SDK drivers are configured to support any Nvidia Tegra based tablet. To be able to use ADB and other SDK tools with your device, you can proceed as follows:
1.On your tablet, go to Menu > Settings > Applications > Development and enable ‘USB Debugging’.
2.Connect your tablet to your PC via USB. You will get a notification that some drivers were not installed, which is OK for now.
3.Right-click ‘Computer’ and click ‘Manage’. Identify your device from the list, right-click it and click ‘Update Driver Software..’.
4.Choose to browse your computer for driver software and then select to pick from a list device drivers on your computer.
5.Choose to view all devices and click ‘Have Disk…’.
6.Browse to the google-usb_driver folder inside your Android SDK folder and select the android_winusb.inf file.
7.If you get any warnings prompts telling you that the driver might not be compatible, just choose to continue installing.
8.Once the drivers have been installed, you should be able to use ADB with your device.
9.To confirm that your device is recognized, launch a Command Prompt window and enter these commands: adb kill-server
adb start-server
adb devices
Also, using BRKs Transformer's instructions found a way to boot Tablet S into recovery: has reboot, update from ZIP and factory reset options
a) Hold down power and volume UP button
b) when SONY logo appears, release power button but keep pressing volume UP button
c) should load into recovery
This also gives us the MTP device driver, which I have been unable in finding/installing
No luck so far with Automated rooting tools, working hard to crack this awesome tablet!
Bojanglez said:
I don't seem to have that file
I had done all the other steps in order to mount the tablet and copy files over (which works great).
Does anyone have issues with Sony's Music player failing to update the database? Music appears in the native Music app correctly but nothing in the Sony one
Click to expand...
Click to collapse
Thanks Kaz Taguchi !!
Couldn't connect to my Sony..
It made me crazy..!
I was just forgotten the:
4. Add line idVendor to ~/.android/adb_usb.ini
0x054C
So i created the file:
touch ~/.android/adb_usb.ini
and echoed the line into the file.
Works lime a charm now.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
CaptainJack87 said:
With the help of the vendor ID from above and the following article on generic Tegra Tablets, was able to get it to show up on Windows!
(Copied from addictivetips)
1.You must have Android SDK installed before you can proceed. If you don’t have it already, proceed to our guide on what is ADB and how to install it. Make sure you download the Google USB Driver Package as well.
2.Open the google-usb_driver folder that you will find inside your Android SDK folder.
3.Open the android_winusb.inf file in notepad or any text editor to edit it.
4.Add these lines under [Google.NTx86] or [Google.NTamd64] depending on whether you are using 32 bit or 64 bit Windows. If unsure, it is safe to add these under both these sections. ;NVIDIA Tegra
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
%CompositeAdbInterface% = USB_Install, USB\VID_0955&PID_7100&MI_01
Don’t edit or replace any other text that is already there; just add these new lines and save the file.
5.Open a command prompt window and enter this command: echo 0x054C >> "%USERPROFILE%\.android\adb_usb.ini"
Note: this is where you have to use 0x054C instead of what is at the link, otherwise it wont work
Now your Android SDK drivers are configured to support any Nvidia Tegra based tablet. To be able to use ADB and other SDK tools with your device, you can proceed as follows:
1.On your tablet, go to Menu > Settings > Applications > Development and enable ‘USB Debugging’.
2.Connect your tablet to your PC via USB. You will get a notification that some drivers were not installed, which is OK for now.
3.Right-click ‘Computer’ and click ‘Manage’. Identify your device from the list, right-click it and click ‘Update Driver Software..’.
4.Choose to browse your computer for driver software and then select to pick from a list device drivers on your computer.
5.Choose to view all devices and click ‘Have Disk…’.
6.Browse to the google-usb_driver folder inside your Android SDK folder and select the android_winusb.inf file.
7.If you get any warnings prompts telling you that the driver might not be compatible, just choose to continue installing.
8.Once the drivers have been installed, you should be able to use ADB with your device.
9.To confirm that your device is recognized, launch a Command Prompt window and enter these commands: adb kill-server
adb start-server
adb devices
Also, using BRKs Transformer's instructions found a way to boot Tablet S into recovery: has reboot, update from ZIP and factory reset options
a) Hold down power and volume UP button
b) when SONY logo appears, release power button but keep pressing volume UP button
c) should load into recovery
This also gives us the MTP device driver, which I have been unable in finding/installing
No luck so far with Automated rooting tools, working hard to crack this awesome tablet!
Click to expand...
Click to collapse
Done loading packages.
Preparing to install archives
Downloading Google USB Driver package, revision 4
File not found: C:\Program Files (x86)\Android\android-sdk\temp\usb_driver_r04-windows.zip (Access is denied)
Done. Nothing was installed.
I tried downloading and installing
(Can't post links)Download: Android USB Drivers - Original (Firmware 1.0)
But when I try to install the drivers for the tablet through device manager it says:
The folder you specified doesn't contain compatible software... ...Windows for x64-based systems.
Apparently this driver is only for x86. But after googling "download Google USB Driver Package" that's all I can find.
Got it...
At least I was able to "enable it" through the USB port,
thanks to this exercise in frustration.
Alas no root screen cap still didn't work.
It flashes wildly and does nothing.
Anyone happen to know the proper command line in system variables for win 7 for adb should be?
I haven't used adb in forever, and I think alot of peoples issues with adb is in the fact they cannot use it outside of the android/android-sdk/platform-tools directory. As in you can just type adb shell, adb start-server, adb kill-server from the root dir. I had it set up before, but with a new comp now, and I forgot what it was before.
whats going wrong
i cant seem to get the device driver on my adb at all. no matter what i do i cant get the usb driver sorted. this is where i get stuck"
Please add 0x54c into .android/adb_usb.ini file under HOME directory by using following command from command prompt.
echo 0x54c >> %HOMEPATH%\.android\adb_usb.ini
home directory???? every time i try this from home directory i get nothing.
this is my problem.... i dont have this file or entry. what is the entry?????? o notpad doc??,
adb_usb.ini file was missing the 0x54c entry! <<< what is this. a screen shot goes a loooong way.
Adb was simple with my x10 and sgs2 but man this is giving me the ****s.
can someone please post a few simple screenshots of what directory is supposed to be where please?
---------- Post added at 08:39 AM ---------- Previous post was at 08:21 AM ----------
what does this mean?
Thanks Kaz Taguchi !!
Couldn't connect to my Sony..
It made me crazy..!
I was just forgotten the:
4. Add line idVendor to ~/.android/adb_usb.ini
0x054C
So i created the file:
touch ~/.android/adb_usb.ini
and echoed the line into the file
?????????
I've created an automated ADB driver installer for the Sony tablets.
No more messy, time-consuming SDK install.
http://forum.xda-developers.com/showthread.php?t=1488822
Official Sony instructions
Looks like Sony has posted official instructions for setting up ADB with the Tablet S:
esupport.sony.com/US/perl/support-info.pl?info_id=878
After following their instructions I still had to go to Device Manager, choose to Update the driver for my tablet, and point it to the SDK/usb_driver folder. After that it works great.
debug
Hey guys i have installed the android sdk and the sony s drivers from the official site as dreadengineer posted. but after run the adb devices command i was unable to saw my device.
After that i tried the automated installations that BluechipJ posted, but the result was the same i cannot see the devices neither on eclipse or adb devices command.
i want to debug my application on this device but i could not access it. Can someone help me.
I have a windows 7 x64 OS. i'm able to debug on htc phone and also on the super slower emulator
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
laconical said:
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
Click to expand...
Click to collapse
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Hello. Thanks for the reply.
I am going to ask what are probably very obvious questions but I am a little out of my depth.
1) What does installing a custom recovery involve?
2)How would I backup the EFS directory? When I had ES file explorer I would have been able to try and find it. However, as it is I do not know how to find the directory and back it up. I have connected the phone to a windows laptop and it shows up as note3 but there are no folders or files visible in either the phone or on the card.
3) What is the procedure to "wipe everything"?
I think the final part I know how to do with ODIN. Just go to download boot and load and run odin with the ROM.
I got the BTU ROM is that not for the UK? I tried looking up what NC2 was but did not really find anything the explained what it is.
Thanks again and sorry for the ignorance on my side.
Let's put the custom recovery and all that on the back burner for now.
Was your phone unlocked from the factory or did you get it from a carrier? If from a carrier, which, and is it unlocked now or you are still using it with the original carrier? This one is for Vodaphone http://www.sammobile.com/firmwares/3/?download=27401 but if you are unlocked, it should work anyway, I believe.
Thanks to the people for their replies. I managed to solve the issue as below.
As mentioned previously I had flashed using ODIN and BTU version of N9005XXUENB7. The only other thing that was then required was to enter the recovery (I think power + volume up + home and then release power once samsung name appears). I then selected wipe data/factory. A reboot later and everything was solved.
es0tericcha0s said:
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Click to expand...
Click to collapse
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
christaph3r said:
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
Click to expand...
Click to collapse
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Same boat here. Please someone help!
woahs said:
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Click to expand...
Click to collapse
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
vbcomer said:
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
Click to expand...
Click to collapse
Update: I went ahead and successfully install the all-in-one file to the phone via Odin, but it still has the same issues. Can someone give a hint? thanks
FIX!!!
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
sorry guys bt i have the same note 3 and i delete the platform.xml file .....i did a factory reset bt nothing happened ...can u help plz
Re:FIX!
But you have to set the permissions of platform.xml as 0777.Right?
Step 5 how should it works
Android Goobie said:
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
Click to expand...
Click to collapse
Hi have next message in the install root step could you help me please
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push [-p] <local> <remote>
- copy file/dir to device
('-p' to display the transfer progress)
adb pull [-p] [-a] <remote> [<local>]
- copy file/dir from device
('-p' to display the transfer progress)
('-a' means copy timestamp and mode) adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the followin
g format:
<serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-d] [-s] [--algo <algorithm name> --key <hex-encoded ke
y> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-d' means allow version code downgrade)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all]
[-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
THIS IS ONLY TESTED IN WEAR OS 3 ON A GALAXY WATCH 4
THOUGH THIS SHOULD WORK ON ALL WATCHES AND OLDER VERSIONS OF WEAR OS
Requirements:
ADB installed on your computer
Have your wear OS device connected to the same network as you computer
A bit of patience, this works in a very weird way!
Downloading apks and installing them
Firstly enable adb and adb debugging over WiFi on your wear OS device
Then download the latest apks:
Termux
MultiVnc If you want a graphical environment on Linux
When you have the apks run these commands:
Code:
adb connect IP_OF_YOUR_WEAR_OS_DEVICE
You might be able to see your ip under the button for enabling adb debugging over wifi
Then run these commands in the downloads folder
Code:
adb -s " IP_OF_YOUR_WEAR_OS_DEVICE" install NAME_OF_THE_DOWNLOADED_TERMUX_APK_FILE
and
Code:
adb -s " IP_OF_YOUR_WEAR_OS_DEVICE" install NAME_OF_THE_DOWNLOADED_MULTI-VNC_APK_FILE
BE AWARE THAT YOU MIGHT HAVE TO RESTART THE ADB CONNECTION, SOMETIMES IT MAY FREEZE.
to do that run
Code:
adb disconnect
then
Code:
adb connect IP_OF_YOUR_WEAR_OS_DEVICE
Installing Linux in Termux
Stay awake sleepyhead!
To make everything easier enable the option in Termux to keep your watch awake, this will save you from so much trouble.
First open up Termux, then long press the black background.
Then press the three dots and choose the option "More...".
Scroll down until you see the option "Keep screen on", turn on that.
Keyboard?
I've discovered that there's a problem with Wear OS keyboards, for some reason they might not interact properly with certain android applications.
So open up Termux in your Wear OS device and see if you can write anything in Termux.
If that works, see if there's any enter button on your keyboard and see if it works.
If Termux gave any response to what you entered then skip this part and head straight for "The Linux multiverse!"
If the enter button doesn't work then you gotta install an android keyboard.
The best keyboard I've found that also works on round Wear OS devices is "Unexpected keyboard"
Download the keyboard and run:
Code:
adb -s " IP_OF_YOUR_WEAR_OS_DEVICE" install NAME_OF_THE_DOWNLOADED_KEYBOARD_APK_FILE
When the keyboard is installed change you default keyboard into the previously installed keyboard.
The Linux multiverse!
On your ANDROID PHONE install Andronix.
In there you will have a lot of options for installing Linux on Termux. You can choose whatever you want!
When you've chosen what you want, then Andronix will copy a command to your phones clipboard.
Oh no!
This is where you might only have a few options!
The problems is that you have to get the command from your phone to your Wear OS device, though your Wear OS device might not even let you copy and paste!
Though there is a way to bypass this, ANDROID APPS! The easiest way is to install messenger lite(not messenger for Wear OS).
First download Messenger lite. (source for the messenger download link)
Then In the downloads folder run:
Code:
adb -s " IP_OF_YOUR_WEAR_OS_DEVICE" install NAME_OF_THE_DOWNLOADED_MESSENGER_APK_FILE
Log into messenger on your phone and your Wear OS device.
On your phone send the command Andronix gave you, to yourself in messenger.
Then open up messenger on your Wear OS device and long press the command and select copy!
Now the biggest hassle is gone!
The long, really long awakening
Now that you've copied the command, enter Termux. Then long press the black background and press paste.
NOW DON'T TOUCH ANYTHING, so that you don't accidentally change anything in the command.
From your computer run:
Code:
adb shell input keyevent 66
Try to remember this command, or put it somewhere easy to copy. You'll need it pretty often. (this command serves as an enter button)
The installation of Linux will now begin, there will be some Y/N questions, just choose the default options by running:
Code:
adb shell input keyevent 66
After a while you might get questions about region, keyboard and such.
use
Code:
adb shell input keyevent 66
to scroll down when it says [MORE]
then use
Code:
adb shell input text "NUMBER/WORD"
(don't remove the parentheses)
then again use
Code:
adb shell input keyevent 66
as an enter button
It might also ask you for a vnc password, choose a small and easy password.
FINALLY LINUX!
You should now have Linux installed on your Wear Os device. Go do whatever you want with it.
Just remember that your Wear OS device uses arm, so if you wanna use x86 applications, then you gotta use Box64 if you have a 64-bit processor and Box86 if you have a 32-bit processor
Start Linux(Linux might automatically start after installation)
First run:
Code:
adb shell input text "ls"
Code:
adb shell input keyevent 66
This will run the ls command.
Look for a file closely name to start-SOME_LINUX_DISTRO.sh or start-andronix.sh
then run:
Code:
adb shell input text "./start-SOME_LINUX_DISTRO"
then
Code:
adb shell input keyevent 66
BOOM Linux is now running :3
What about GUI?
If you installed a Linux version with a graphical interface then you either gotta use a VNC to display anything on your watch
run
Code:
adb shell input text "vncserver-start"
then
Code:
adb shell input keyevent 66
then
Code:
adb shell input keyevent 66
The terminal will say " New 'remote-desktop' at :NUMBER on machine localhost "
remember that number
now exit Termux and start Mutli-Vnc
Scroll down to "New Connection"
in Address enter localhost
in port enter 590 and then the number. (If the number as is higher than 9, enter 59 and then the number)
Scroll down password and enter in the vnc password you chose earlier.
Then the scroll all the way down and press the big green "Connect" button!
You should now some something, maybe not a lot, but something"
You can manually set the resolution if you want, so that you're able to utilize the screen better, go here for a guide on that.
External GUI
If you actually wanna use the Linux installation, then you'll have to use an external device to view the desktop.
You can follow this guide here, as it's better at explaining then me.
You can also use this guide if you wanna use XSDL.
A tip for entering &, use the keyboard on the watch! Also the read the explanation of commands before you continue, you'll need it!
Command explanation!!
adb shell input text " " will enter any text into the connected adb device, %s is used for spaces
adb shell input keyevents will do any key event, like pressing enter, 66 is for enter
If something doesn't work, let me know. I might've missed something!