Can any developer please please help me out quickly? i'm out of time seriously I need help but quick.
I'm trying to unlock my device Redmi Note 3 Snapdragon varient. All the other commands like
* adb devices
* adb reboot edl
* fastboot devices
* fastboot oem device-info
everyone of it is working fine but when I write
* fastboot oem unlock-go
I get the above mentioned error.
Does anybody know the solution to it? Before answering please consider that other commands are working except this one, I didn't found any proper solution that's why posted the problem here and I already did revoke USB debugging permissions and turned it on again but that didn't helped.
So please give me a working solution as quick as possible or else any help is appreciable.
enable oem unlock in developer options
Enable OEM Unlock option in Developer Options.
caesar13th said:
enable oem unlock in developer options
Click to expand...
Click to collapse
It's already enabled, I don't know what's causing the problem. Please help me with another solution. Ask everything at once, I will answer. But I really need a solution.
superboy123 said:
Enable OEM Unlock option in Developer Options.
Click to expand...
Click to collapse
It's already enabled, I don't know what's causing the problem. Please help me with another solution. Ask everything at once, I will answer. But I really need a solution.
Gurkirat_Singh said:
It's already enabled, I don't know what's causing the problem. Please help me with another solution. Ask everything at once, I will answer. But I really need a solution.
Click to expand...
Click to collapse
That fastboot oem unlock-go command won't work.
OK, follow these steps:-
a) Reboot to Fastboot mode by pressing Power and Vol down buttons for 10 seconds.
b) Download the MiUnlock tool and enter your credentials first. It will check whether your Mi account has permission to unlock (you must have permission from Xiaomi to unlock).
c) It will detect your phone as Mi Phone and proceed to unlock.
d) It will verify whether the Mi account in your phone and the credentials of the Mi account you entered on the PC are the same.
e) It will unlock your device for sure!
If it says some sort of verification error aka. the famous stuck at 50%, wait for some days like for a week and try again, it may work even in 2 days! Keep trying!
Good Luck!:good::highfive:
Thank you!
superboy123 said:
That fastboot oem unlock-go command won't work.
OK, follow these steps:-
a) Reboot to Fastboot mode by pressing Power and Vol down buttons for 10 seconds.
b) Download the MiUnlock tool and enter your credentials first. It will check whether your Mi account has permission to unlock (you must have permission from Xiaomi to unlock).
c) It will detect your phone as Mi Phone and proceed to unlock.
d) It will verify whether the Mi account in your phone and the credentials of the Mi account you entered on the PC are the same.
e) It will unlock your device for sure!
If it says some sort of verification error aka. the famous stuck at 50%, wait for some days like for a week and try again, it may work even in 2 days! Keep trying!
Good Luck!:good::highfive:
Thank you!
Click to expand...
Click to collapse
Thanks for the help but I don't even want to try that method first it's very problematic, it takes a lot of time and it's not even sure if it works. So if you can help me with the problem I'm having that would very very very appreciable :good:.
And why the command will not work, can you please tell me? Also this command gives the same error "fastboot OEM unlock bootloader". Hope you can help .
Gurkirat_Singh said:
Thanks for the help but I don't even want to try that method first it's very problematic, it takes a lot of time and it's not even sure if it works. So if you can help me with the problem I'm having that would very very very appreciable :good:.
And why the command will not work, can you please tell me? Also this command gives the same error "fastboot OEM unlock bootloader". Hope you can help .
Click to expand...
Click to collapse
It's not that problematic, actually it is the easiest way to unlock bootloader!
Unofficial bootloader is the very "problematic" method.
Anyhow, Are you looking for unofficial bootloader unlock? Then go here and follow the steps correctly, dont skip any step.
And for your second question, Xiaomi has complicated the bootloader unlock process by heavy encryption. That's why you couldn't unlock Redmi Note 3 as any Moto device!
superboy123 said:
It's not that problematic, actually it is the easiest way to unlock bootloader!
Unofficial bootloader is the very "problematic" method.
Anyhow, Are you looking for unofficial bootloader unlock? Then go here and follow the steps correctly, dont skip any step.
And for your second question, Xiaomi has complicated the bootloader unlock process by heavy encryption. That's why you couldn't unlock Redmi Note 3 as any Moto device!
Click to expand...
Click to collapse
OK that's why I'm having so much problem to unlock it. I just want to ask do you know any other way to fix the problem I'm having with this error. Cause the post you gave me tells how to unlock the RN3 temporary :crying: but the thread I followed helps to unlock it permanently :good: (how I know cause I used similar commands on my Canvas A1) and I followed almost every step properly.
I don't understand why companies emerged as custom ROMs stops supporting customisation, at least don't make it hard. I just wanted to flash my RN3 with a Custom ROM like CM13 cause MIUI is not supporting 4G networks properly of multiple operators that's why, for which I needed a custom recovery and for which I needed unlocked bootloader.
I just don't understand , all this so that no one could copy their ROM or I don't know for what . It's just makes things difficult for normal people and no one else. Locks can't keep a thief away. If anyone wants to break into their system than one will, if he/she uses right tools properly. Why make normal people lives' difficult?
ALSO I WANT TO ASK MORE THING, if in first case, I get into fastboot mode just after the ROM flash & before very first ROM boot and run this command and if in second case, the room gets booted and then I go into fastboot mode & run the command, DOES IT CREATES ANY CHANCE OF NON-OCCURRENCE OF THAT ERROR IN FIRST CASE?.
Gurkirat_Singh said:
OK that's why I'm having so much problem to unlock it. I just want to ask do you know any other way to fix the problem I'm having with this error. Cause the post you gave me tells how to unlock the RN3 temporary :crying: but the thread I followed helps to unlock it permanently :good: (how I know cause I used similar commands on my Canvas A1) and I followed almost every step properly.
I don't understand why companies emerged as custom ROMs stops supporting customisation, at least don't make it hard. I just wanted to flash my RN3 with a Custom ROM like CM13 cause MIUI is not supporting 4G networks properly of multiple operators that's why, for which I needed a custom recovery and for which I needed unlocked bootloader.
I just don't understand , all this so that no one could copy their ROM or I don't know for what . It's just makes things difficult for normal people and no one else. Locks can't keep a thief away. If anyone wants to break into their system than one will, if he/she uses right tools properly. Why make normal people lives' difficult?
ALSO I WANT TO ASK MORE THING, if in first case, I get into fastboot mode just after the ROM flash & before very first ROM boot and run this command and if in second case, the room gets booted and then I go into fastboot mode & run the command, DOES IT CREATES ANY CHANCE OF NON-OCCURRENCE OF THAT ERROR IN FIRST CASE?.
Click to expand...
Click to collapse
The thread I gave you was not temporary, it is permanent and it is temporary till you get the official unlock permission. Actually it's a permanent 'safe' solution.
Xiaomi did it for security of data, not to stop customising. If it had to stop users from customising, xiaomi wouldn't have given you warranty even if you root or it may not even have given you an option to unlock bootloader!
superboy123 said:
The thread I gave you was not temporary, it is permanent and it is temporary till you get the official unlock permission. Actually it's a permanent 'safe' solution.
Xiaomi did it for security of data, not to stop customising. If it had to stop users from customising, xiaomi wouldn't have given you warranty even if you root or it may not even have given you an option to unlock bootloader!
Click to expand...
Click to collapse
Thanks for all the support and help you gave me.
I got this error too but i forgot how to fix it.
Something about the 'disable driver signature' or the modified rom that you flash before you trying to unlock.
caesar13th said:
I got this error too but i forgot how to fix it.
Something about the 'disable driver signature' or the modified rom that you flash before you trying to unlock.
Click to expand...
Click to collapse
I unlocked the bootloader and also flashed the ROM successfully but still I'm not able to use the 4g service.
superboy123 said:
The thread I gave you was not temporary, it is permanent and it is temporary till you get the official unlock permission. Actually it's a permanent 'safe' solution.
Xiaomi did it for security of data, not to stop customising. If it had to stop users from customising, xiaomi wouldn't have given you warranty even if you root or it may not even have given you an option to unlock bootloader!
Click to expand...
Click to collapse
I unlocked the bootloader and also flashed the ROM successfully but still I'm not able to use the 4g service.
Gurkirat_Singh said:
I unlocked the bootloader and also flashed the ROM successfully but still I'm not able to use the 4g service.
Click to expand...
Click to collapse
By your name, I think you are an Indian, so which Sim you are using? You need to do a 4G pack recharge first to use LTE, VoLTE won't work in custom ROMs right now.
Edit: you could see this thread but this is a bit complicated: http://en.miui.com/thread-335643-1-1.html
superboy123 said:
By your name, I think you are an Indian, so which Sim you are using? You need to do a 4G pack recharge first to use LTE, VoLTE won't work in custom ROMs right now.
Edit: you could see this thread but this is a bit complicated: http://en.miui.com/thread-335643-1-1.html
Click to expand...
Click to collapse
I appreciate your help but the post you gave me is for non-asian countries so it will not work for me. As you already know I'm an Indian so that's why. Are you an Indian, only asking cause in that way you may already faced the problems i'm having.
I'm only familiar with only 2 4G networks for now. One is Airtel 4G, what they say have FDD LTE network, I don't what that is, but that's why it's not working on my phone, I contacted them and they said that my phone doesn't support it, I don't know why cause it support much more LTE Bands other than any smartphone in that price range. Second is Jio 4G, my sim gets detected, shows network in manual selection but doesn't get registered on them. I see only the message of 'No Service' or 'Emergency calls only' when I insert it.
@Gurkirat_Singh
It worked for me.
I had the same problem!
superboy123 said:
@Gurkirat_Singh
It worked for me.
I had the same problem!
Click to expand...
Click to collapse
What worked for you and how? Can you please answer/clarify my questions/doubts please also?
I tried that fix that I gave you and 4G started working for me. You cannot use jio on second sim slot. 2nd sim only connects to 2g.
superboy123 said:
I tried that fix that I gave you and 4G started working for me. You cannot use jio on second sim slot. 2nd sim only connects to 2g.
Click to expand...
Click to collapse
OK I'll try when got time and will update you with the result.
I've been unlocking my kenzo since day 1 with no hassles. Recently I decided to flash a fastboot rom so solve my proximity sensor problem (which it didn't, ofc). Then I tried to unlock the bootloader to roll back to my previous twrp backup but after trying to unlock, it sticks at 99 percent showing a description in Chinese. Thanks to the recent advancees in technology(!) I could translate it to English.
It says "The phone is not used in the specified time, unable to unlock"
I just ask for permission in the developer options while OEM unlocking switch is on, and after that I reboot into fastboot mode right away to unlock the device. What the heck am I supposed to do?
mehrshad.shafaghi said:
I've been unlocking my kenzo since day 1 with no hassles. Recently I decided to flash a fastboot rom so solve my proximity sensor problem (which it didn't, ofc). Then I tried to unlock the bootloader to roll back to my previous twrp backup but after trying to unlock, it sticks at 99 percent showing a description in Chinese. Thanks to the recent advancees in technology(!) I could translate it to English.
It says "The phone is not used in the specified time, unable to unlock"
I just ask for permission in the developer options while OEM unlocking switch is on, and after that I reboot into fastboot mode right away to unlock the device. What the heck am I supposed to do?
Click to expand...
Click to collapse
Keep Phone time settngs to auto And pc time setting. May be u using proxy on pc.
naik2902 said:
Keep Phone time settngs to auto And pc time setting. May be u using proxy on pc.
Click to expand...
Click to collapse
They are already auto. and no proxies for pc.
I tried for months but ended up using unofficial method. It is impossible to unlock unofficially for kenzo since 8,9 months.
mehrshad.shafaghi said:
I've been unlocking my kenzo since day 1 with no hassles. Recently I decided to flash a fastboot rom so solve my proximity sensor problem (which it didn't, ofc). Then I tried to unlock the bootloader to roll back to my previous twrp backup but after trying to unlock, it sticks at 99 percent showing a description in Chinese. Thanks to the recent advancees in technology(!) I could translate it to English.
It says "The phone is not used in the specified time, unable to unlock"
I just ask for permission in the developer options while OEM unlocking switch is on, and after that I reboot into fastboot mode right away to unlock the device. What the heck am I supposed to do?
Click to expand...
Click to collapse
Why chinese? Use english version of miunlock tool.
Make sure u using same phone number and sim which u got permission to unlock.
And make sure sim card shows "activated" status in mi account on phone.
hello sir, i got the same problem on my poco f1. have you got any solution ? please help me.
will i be able to unlock my phone again or not ?
Ranjay_Yadav said:
hello sir, i got the same problem on my poco f1. have you got any solution ? please help me.
will i be able to unlock my phone again or not ?
Click to expand...
Click to collapse
Bro I'm not providing a solution, I'm asking for help just like you lol.
naik2902 said:
Why chinese? Use english version of miunlock tool.
Make sure u using same phone number and sim which u got permission to unlock.
And make sure sim card shows "activated" status in mi account on phone.
Click to expand...
Click to collapse
I didn't say I was using the chinese version, I downloaded the official one that the unlocking page gives me which is in English. But that specific error was written in chinese. Like something from the server.
sandeshdroid said:
I tried for months but ended up using unofficial method. It is impossible to unlock unofficially for kenzo since 8,9 months.
Click to expand...
Click to collapse
Damn...
Which method are you using atm?
hi everybody
I explain my problem, and hope found a solution...
I have a Samsung A10, but i lost the gmail account.
I have tried many things to unblock FRP of my smartpone. All is ok but i can't unblock it because i can't go in the settings of the samsung to accept the foreigner installation of apk
Then , my question is...it is possible ton change the firmware, or put another Os to use it ?
I've tried to flash with the original firmware, it was ok, but the frp is still activated
Thanks a lot for your help
aero06 said:
hi everybody
I explain my problem, and hope found a solution...
I have a Samsung A10, but i lost the gmail account.
I have tried many things to unblock FRP of my smartpone. All is ok but i can't unblock it because i can't go in the settings of the samsung to accept the foreigner installation of apk
Then , my question is...it is possible ton change the firmware, or put another Os to use it ?
I've tried to flash with the original firmware, it was ok, but the frp is still activated
Thanks a lot for your help
Click to expand...
Click to collapse
Sorry to say, but if the device is still connected to the Google account, you have to verify that it is your phone/account.
I was given a Tab S7 WiFi (T870) by a client whos husband passed away. She does not know the PIN, or the Gmail account password and gave it to me because "You can probably figure out how to get into it". The device had the newest firmware installed with the U2 bootloader (I had downgraded the firmware to the earliest version of the Bit-2/U2 bootloader). I know FRP can be bypassed with a combination firmware but it doesn't seem to be available as the only combination file I can find for this device is with the older U1 firmware. I have tried every tool I can find and cannot come up with any kind of solution. Is this thing just a big paperweight now or is there another solution I am missing?
if you have the box as well & proof of purchase, go to Service Center and explain the situation
Crescendo Xenomorph said:
if you have the box as well & proof of purchase, go to Service Center and explain the situation
Click to expand...
Click to collapse
I have neither, only the tablet.
Fixed by @hainguyenthao
HE IS AWESOME AND EXTREMLY HELPFUL!!!!!
glad you can use it ^^
Hi,
After buying the phone, I tried to change the rom to unbranded. Unfortunately, several attempts did not bring results, because in my country unbranded soft detects the operator's brand anyway.
Then at least I wanted to root my phone. OEM lock in developer options was not visible, but tutorials from forum worked and it is now ON.
Unfortunately, despite the enabled option, when I enable booting, I have the information Oem Lock: ON (U1).
I've waited 168 hours but that doesn't help.
I also tried MAGISK by ABT and Fasttool but it doesn't work (I get an error).
What can be done about it. I was looking for information for a long time and to be honest I do not know whether this phone can be rooted?
My model is A52 5G SM-A526B with the operator's brand.
I had similar issues with OEM unlock and rooting.
I returned the phone before the 2 week window expired. Picked up a OnePlus 9 and have had no issues.
I am sorry for your frustrations
Hello, Do anyone have an solution for this? The long press (to enabel OEM) on the screen have disappeared after upgrading to android 12 and UI 4.0. Now its the same as SKIBALDZ. Can´t enter the phone as it can´t download workprofile anymore...
I
Arobase40 said:
Watch at post #65 of my guide/tutorial, this should solve your problem !
Click to expand...
Click to collapse
I did not understand that post and the guide/tutorial. Can you specify what to do? cant use odin as it oem locked.
Arobase40 said:
But it is clearly explained in my post #65 !!!...
From your picture I see you installed a stock firmware and I guess you didn't fully setup your system with your google account and that's why the OEM Toggle doesn't show off...
That's it !
Click to expand...
Click to collapse
So as i interpret you answer. There is noting i can do.
Arobase40 said:
Watch at post #65 of my guide/tutorial, this should solve your problem !
Click to expand...
Click to collapse
can you please share the link