[APP] UK Train Times - Live train departures & arrivals on the Pace/Stratos - Amazfit

Train times on your watch!
This is a simple app, originally developed to test the Communication library. It's designed to mimic a platform-level train departure board at a station, but displaying the platform too.
Features
- Add all of your local stations as options (tap the station name to pick from a list)
- Supports both departures and arrivals
- Shows all trains coming to the station soon (on time, delayed or cancelled) and the dreaded rail replacement buses
- Tap an item for full info on a full screen layout
- Displays calling points, including times
- Shows statuses of the trains, including minor delays
- Updates automatically every minute
- Also supports pull down to refresh
- Always shows a clock on screen so you don't lose track
Data from National Rail Enquiries
This app requires the Amazfit Internet Companion app to be installed on your phone. To find out how to install that, see this thread
Installation and Usage
- Make sure you have the Amazfit Internet Companion app installed (see above)
- Download the latest release from here, and install it as follows:
Code:
adb install -r AmazfitUKTrainTimes-1.0.apk
- Launch it from the app list in the launcher (this needs to be enabled, see here)
Troubleshooting
It shows an error loading!
Check your watch and phone are connected (neither in airplane mode, Bluetooth for both is on and connected, phone is connected to the internet), and try restarting the service in the Amazfit Internet Companion app (See app thread for details)
I can't close the app!
Swipe on the clock at the bottom, it doesn't work on the train list. Alternatively, long press on the station name to close the app immediately

Incredible work!

Quinny899 said:
Train times on your watch!
This is a simple app, originally developed to test the Communication library. It's designed to mimic a platform-level train departure board at a station, but displaying the platform too.
Features
- Add all of your local stations as options (tap the station name to pick from a list)
- Supports both departures and arrivals
- Shows all trains coming to the station soon (on time, delayed or cancelled) and the dreaded rail replacement buses
- Tap an item for full info on a full screen layout
- Displays calling points, including times
- Shows statuses of the trains, including minor delays
- Updates automatically every minute
- Also supports pull down to refresh
- Always shows a clock on screen so you don't lose track
Data from National Rail Enquiries
This app requires the Amazfit Internet Companion app to be installed on your phone. To find out how to install that, see this thread
Installation and Usage
- Make sure you have the Amazfit Internet Companion app installed (see above)
- Download the latest release from here, and install it as follows:
Code:
adb install -r AmazfitUKTrainTimes-1.0.apk
- Launch it from the app list in the launcher (this needs to be enabled, see here)
Troubleshooting
It shows an error loading!
Check your watch and phone are connected (neither in airplane mode, Bluetooth for both is on and connected, phone is connected to the internet), and try restarting the service in the Amazfit Internet Companion app (See app thread for details)
I can't close the app!
Swipe on the clock at the bottom, it doesn't work on the train list. Alternatively, long press on the station name to close the app immediately
Click to expand...
Click to collapse
Good Job! I like the idea a lot, and I would like to try to do the same, but for NS (Netherlands train system). I will start with understanding the "Amazfit Internet Companion" and was thinking if you can help me by releasing the source code of the app via Github or any other platform? I will give credits to your work ofc, or if you would like to keep control over the app and if you have time to implement same concept but getting the train info from ns.nl, it would be really really nice...

Adi59 said:
Good Job! I like the idea a lot, and I would like to try to do the same, but for NS (Netherlands train system). I will start with understanding the "Amazfit Internet Companion" and was thinking if you can help me by releasing the source code of the app via Github or any other platform? I will give credits to your work ofc, or if you would like to keep control over the app and if you have time to implement same concept but getting the train info from ns.nl, it would be really really nice...
Click to expand...
Click to collapse
I'm not releasing this to github, because the basic concept and code for getting data from the internet is already available, in the example project within this repo

Quinny899 said:
I'm not releasing this to github, because the basic concept and code for getting data from the internet is already available, in the example project within this repo
Click to expand...
Click to collapse
Thanks for the fast reply, I'll look into it as well. I'll let you know if I get stuck anywhere on the road.

Related

[APP] WMDreamRemote - control your Dreambox-with streaming!

WMDreamRemote (WMDR) - with streaming
UPDATE (22/04/2012): No more deadlines. The reason is that I am busy with other projects. I might implement other features in future. You can download from my web-site, http://www.tillekesoft.com. There you can find as usual two versions. One version is for devices using 320x240 but it should work fine also with devices having a resolution of 640x480. For all other resolutions, please use the other one. For existing users, you just need to replace the old executable with the new one.
06/10/2010 - I have attached a "step-by-step"-guide for setting up WMDR - in particular what regards streaming (it is in English but you can use Google Translation-tools to translate it to another language). Hopefully, this will make it easier for new users to get WMDR working.
IMPORTANT (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WMDR is not compatibile with the latest version of VLC. So if you want to use WMDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
Change-log: nothing so I am leaving old change-log here below:
This version is more like a Service-Release fixing some bugs and introducing few new features:
-fixed issue when using WMDR with Enigma2 outside your LocalLAN where WMDR passed on a DynDNS-address to the Dreambox instead of LocalIP-address which is the correct way. Thanks to mkbm for finding this bug.
-fixed streaming-issue in Enigma2 when changing between channels located on different transpoders would cause problems. Thanks to mkbm for explaining this.
-improved error-handling (clearer messages). Still to be improved further.
-possibility to kill stream when exiting WMDR
-other minor bug-fixes
-some optimization
-added a program-icon (it's very basic - if you can come up with a better-looking icon, please do so and post it here in the thread)
-fixed issue with DM8000
To see WMDR in action (using a pre-release of Beta 0.7), watch this video posted by XDA-user ajocius on YouTube:
Background: After on-going discussions in this thread http://forum.xda-developers.com/showthread.php?t=616353 regarding an application to control remotely the Dreambox, I decided to write an application to accomplish this request.
In above thread, a very simple and crude beta-application was posted. Now, the application has evolved further and therefore I reckoned it was more appropriate to open a new thread in this area which is meant for Window Mobile applications.
Extra Information: The Dreambox is a series of Linux-powered DVB satellite, terrestrial and cable digital television receivers (set-top box), produced by German multimedia vendor Dream Multimedia. It's "kind of" of open-source which has led many "teams" to develop so called "images" for this receiver as an alternative to the original one furnished by Dream Multimedia. In addition, many other hardware manufactures have produced their own receivers (some of them are actually clones while others are not) using the same concept of the Dreambox i.e. Linux-powered. The Dreambox has evolved during the years and many models are present on the market. The first ones are/were using a firmware called "Enigma" but, more or less, with the introduction of High Definition TV, a new firmware was released, namely "Enigma2". One of the "revolutionary" features of the Dreambox was that you can connect it to your local network and this opened up a whole new word compared to ordinary satellite-receivers. To get further information, just google for Dreambox or look it up at Wikipedia.
Background for the application: You can read the original thread mentioned above to get an idea why people wanted an application like the one I am releasing. In a few words: since you can access the Dreambox (or any other satellite-receiver based on Enigma or Enigma2) through your local network or through Internet, there are many things you can do remotely (at work for instance) such as handling timer-events, read EPG etc. The ideal way of doing it, especially if you don't have access to a PC, is to use a handheld device. It was brought to our attention, that there are plenty of applications to do what mentioned above already available for download on the Appstore for iPhone.
for instance:
http://appspace.com/apps/view/38502/idreamremote/
http://appspace.com/apps/view/40338/dreamon/
So, it was suggested to write a similar application for Windows Mobile. And here it is, still in beta although with quite a lot of features implemented, even Streaming-support.
Current Features:
-Streaming
-Remote Control
-Bouquets-/Channels-lists from where you can:
1) change channel
2) view EPG
3) set timers
-Controlling the receiver (Shutdown, Reboot etc)
-Supports set-up of multiple profiles (e.g. At work, home, bedroom)
-Supports set-up of multiple streaming-profiles (Local LAN, WLAN, mobile)
Known issues:
-is not compatible yet with old WebIf (1st generation) of Enigma2
-there might be some problems with certain characters not appearing correctly (please report if you have this problem)
-in 320x240 version when setting up Enigma-profiles, you might need to click twice in the various textboxes.
Features to implement in upcoming versions (not necessarily in this order):
- SMS (Send shortmessages to the TV-Screen)
- improve error handling further
- other ideas/stuff
- user-suggestions (your feedback for improvements)
- re-design the remote-control using png-images instead of jpg which should make the application a bit smaller (and require less memory)
- resolving above mentioned issues
- other bug-fixes
- support for other receivers - requests I have received are for D-box2 and IPBox HD (non Enigma)
- cosmetic issues
- Https (SSL) support. (tested and working but needs a specific hotfix-version of CF.NET (published by Microsoft) due to a bug in CF.NET)
Requirements:
-Compact Net Framework (2.0 should be sufficient)
-an Enigma-based receiver such as the Dreambox, IPBox etc..
-for streaming, please see second post below
Installation:
Note: I have not made any CAB-file.
Note2: If you want to keep your old settings and streaming-profiles, you may do so. Just replace the old WMDreamRemote.exe with the new one.
1) download the zip-file attached to this post and extract the files on your computer.
2) Copy the files into a directory of your choice on your device (internal or
storage). The files must be in the same directory.
3) Run WMDreamRemote.exe. The first time, you will get a message
saying "No connection....".
4) Choose Preferences/Profiles from the main-screen and ADD a new
profile inserting your data. Put the flag on default for the profile you use the most.
5) Then click Save Profile.
6) Go ahead if you wish to add other profiles.
7) You may delete my dummy-profile "home" (only after having added your own though) using
the Del-button. NOTE: It's important that there is always one profile present (with Default selected)
otherwise there might be unexpected errors
8) On the main-screen, you can now use the remote-control by selecting its button
9) You may also see a bouquet/channel list by clicking on its button. However, the first time the list will be empty. Therefore,
10). Go back to Preferences/Profiles and select the profile you want to use. Now select the
button named "Create Bouquets for this profile". This will take a minute or two. It will download
your bouquets and channels from your Dreambox. Do the same for each Profile you create.
11) Now you can scroll your bouquets ad channels.
12) Set up streaming-profiles (3 dummy profiles are provided for Local-LAN, WLAN and mobile) - see second post for more information
There might be some unhandled error-messages occasionally. They are mostly due to connection-problems. Just click on continue and retry unless you have indeed a permanent error with your connection.
Please test it and let me have your error-reports, feedback and suggestions for improvements. Please also indicate which device, Dreambox (or similar receiver) you are using and which image.
I must also express my sincerest thanks to XDA-user ajocius for:
-giving me access to Enigma2,
-his superb beta-testing,
-sharing his knowledge about streaming
-and of course for the great video he posted on YouTube (see above).
I have also attached some screenshots.
PS: ANDROID - Just a note to tell you that I posted here on XDA an Android-application for watching your Dreambox in streaming (LocalLAN and 3G). I called the application AndroidDreamer and you can find the thread here: http://forum.xda-developers.com/showthread.php?t=861145
If you want to test and discuss AndroidDreamer, head over to the thread. Please keep this thread for WMDR.
PS2: WINDOWS - I have published a Windows-version (WinDreamRemote or simply WinDR). You can find it on my web-site: http://www.tillekesoft.com
For discussions regarding WinDR, please use the thread mentioned on my web-site. This thread here at XDA is for WMDR - mobile version. Please respect this.
This is it for the time being.
STREAMING
Streaming works great for me, especially at home (in my Local LAN) but also at work (using WIFI) and even at the supermarket using a mobile-connection (3G) although the quality degrades.
For you, I don't know - Streaming may work, may work so and so or may not work at all.
It depends on a lot of factors:
-For Local-LAN: your WIFI set-up at home (11g, 54g etc)
-For WLAN or mobile: upload/download speed of your Broadband (normally upload-speeds are slower than download-speeds (ADSL)
-Your device
-Your computer acting as VLC-server
-not finding the right configuration in stream-profiles settings
-etc
What you need:
1) VLC (Videolan). Just Google for it and install it on your computer which will act as the VLC-server. I have only tested streaming using VLC running on Windows but it should work on VLC-servers using Linux and MAC as well. If it doesn't, please let me know. I have only tested version 1.0.5 of VLC so I am unable to say if previous versions will work.
UPDATE (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WinDR is not compatibile with the latest version of VLC. So if you want to use WinDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
2) TCPMP (free and which you can find here on XDA) or Coreplayer (not free). Make sure that ASX-files are opened by the program you installed (look in the programs' settings for file-association). Some say that TCPMP is faster to load the stream (5-6 seconds in my Local-LAN) than Coreplayer. On the other hand, some say that Coreplayer is more fluid. The choice is yours.
3) A rather modern and fast device. It might work with slower devices as well but you may have to play a lot with your VLC-configuration (bitrate etc) before you get it to work
4) and of course WMDR
How to set up everything:
1) install VLC on your computer which will act as the VLC (streaming) -server. Then under the menu, select "View" in the English version (not sure since I have it in Italian) and then select "Add Interface" and finally you select "Add Telnet-interface". If you haven't changed anything, the default password for Telnet is admin and the port in use is 4212. That's it. VLC must be running to get streaming working. There are options to install VLC as a Windows Service or you can create a bat-file to be executed upon launch of your VLC-server. I guess similar options are availabe on Linux and MAC as well.
2) if you are going to use streaming outside your Local-LAN, you must ensure that you have set up port-forwarding correctly in your router. You must ensure that the WebIf can be accessed. You must ensure also that port 4212 (for Telnet) is opened and forwarded to the VLC-server. The same goes also for the streaming-port on the VLC-server which TCPMP/Coreplayer needs to access to receive the stream. So, basically you need to set up port-forwarding for one port for accessing the WebIf of your Dreambox and two ports for accessing your VLC-server.
3) A typical VLC-command to get streaming going is as follows:
Code:
vlc.exe" -vvv [url]http://192.168.1.130:31339/0,0025,0384,0385,0295[/url] --sout #transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst=192.168.1.12:8085}}
Here are some explanations:
- the part "vlc.exe" is handled by WMDR using Telnet. You don't need to anything except for filling in information regarding the IP-address of your VLC-server, its password and which port to use.
- the part
Code:
"http://192.168.1.130:31339/0,0025,0384,0385,0295"
is your dreambox-ip, the port used for streaming and some channel-parameters. These parameters are handled automatically by WMDR and do not require your attention
- the part
Code:
"#transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst="
is the one you have to insert in WMDR and which you need to experiment with to get the best picture/quality/fluidity according to your connection-speed. WMDR is pre-installed with 3 examples which are working on my HD2, my WIFI (using 54g) and my ADSL with an upload speed of 512kb. You can use those as an example and then modify them according to your needs.
- the part "192.168.1.12:8085" is the IP of your VLC-server and the port which TCPMP/Coreplayer should connect to in order to get the stream. You fill in this information in the stream-profiles.
With this information, you can set up your streaming-profiles in WMDR. In the streaming-profiles, you will find an additional setting called "VLC Sleep Delay". You can leave it at 200ms as its default-value. This parameter is used by WMDR when "talking to" VLC via Telnet. If the connection is very slow, you can increase this value but normally, even on Mobile-connections, the value of 200ms is OK.
Above information should get you going.
If you have problems with streaming, look at the points mentioned above since it is unlikely due to WMDR itself and that I can do anything to resolve your problems.
Good luck!
TIPS AND TRICKS:
-To make TCPMP open up automatically in full screen mode, you can do the following registry-edit:
Code:
HKEY_LOCAL_MACHINE\Software\TCPMP\PLAY
DWORD 123
Change value from 0 to 1
-For associating the file-extension ASX with TCPMP, do as follows: In TCPMP it is under:
Options -> Settings (you need to scroll down to see that option) - > Click button "Select Page" - > File Associacions
Click to expand...
Click to collapse
-As far as I have understood, TCPMP has been discontinued but there are some people updating it from time to time. If you have problems viewing the stream, it may (perhaps) be because you are using an old version of TCPMP. Here are two links to TCPMP which I have found working on my HD2:
http://forum.xda-developers.com/showpost.php?p=5657963&postcount=1
http://forum.xda-developers.com/showpost.php?p=5685536&postcount=1
TROUBLESHOOTING
- If you get errors in TCPMP (unknown file format, crashes) or if you don't see anything at all, you can try the following to trace where the error originates:
Select Stream in WMDR and if you get an error message from TCPMP, just disregard the error and put your device on the table or wherever. Don't click on anything. Don't kill the stream. Now, in the folder of WMDR on the device, you should find a file called WMDR.asx. Copy this file to your desktop (on a PC). Go to your PC and right-click on WMDR.asx and choose "open with" and select VLC (it will open another session of VLC). If you now can see the stream from your Dreambox on your computer-screen, then it means that WMDR comunicates correctly with VLC and most likely there is a problem with TCPMP/Coreplayer or because the file is too large/complex to be seen on the device. If you don't see anything, then probably there is a communication-problem between WMDR and VLC. Check IP-address, Port and Password of VLC.
- Make sure that streaming actually works between your Dreambox and VLC (without using WMDR) and that you can watch the streams on your computer. You can test this by using the web-interface of your Dreambox or you can search internet for instructions. If you have problems (can't see anything at all, bad quality, buffering-problems etc), then the problem itself lies with the source and there is no way streaming will work in a satisfying way. For instance, it has been reported that cheap (clones of) DM500 might have problems with streaming.
is this like a remote control app for any settop boxes and tv's that uses ir port or is it limited to the Dreambox?
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
trickbiker121 said:
is this like a remote control app for any setop boxes and tv's that uses ir port or is it limited to the Dreambox?
Click to expand...
Click to collapse
tilleke said:
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
Click to expand...
Click to collapse
sorry this isnt the app that i thought it was sorry to bother you
Hi Tilleke
Very nice looking release. I'm really happy with it!
i have tested it and here are my results:
Main screen > remote controle > page 2 > the numbers are not working here.
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do...
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Thanks for testing and posting your results.
Can you please let me know which receiver you have and which image you are running. And on which device did you test it?
Will check this better.
citychannel said:
Main screen > remote controle > page 2 > the numbers are not working here..
Click to expand...
Click to collapse
When creating the bouquets, did you follow the procedure written in the first post? I am saying this since that part is not fool-proof yet. Did you reach the point when a message appears indicating "Update ready" or did it crash before. BTW: I have never seen a crashed dreambox with a blue screen I'd love to able to reproduce that error
citychannel said:
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do.....
Click to expand...
Click to collapse
Thanks!!
citychannel said:
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Click to expand...
Click to collapse
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
thanks for your report.
1) OK, you've got DM7025 and running Enigma(1). Are you using the original image or have you flashed another image such as Gemini, Nabilo...If yes, which one?
2) Can you access the WebIf of the DM7025 using your local network and using a normal web-browser? In your browser, you should use:
Code:
http://ip-address of DM7025:port
it should then ask you for a user-name and password, normally root and dreambox.
example:
Code:
http://192.168.0.83:8888
If you are using the standard port (80), it could also be:
Code:
http://192.168.0.83
When you are connected to the WebIf and clicking on ZAP, can you see your bouquets and channels?
3) The time-out bug: What message do you get. Can you please transcribe it? Does this happen when you are connected using WIFI or when you are connected using the data-connection of your phone-provider?
4) what device are you using?
Sorry, but I need above information otherwise I really don't see how to track down the errors you mentioned since I can't reproduce them on my system/device.
PS: I confirm that the numbers on the 2nd screen don't work. I forgot to enable a few lines in my code. Will be corrected in next version. Thanks for finding out.
citychannel said:
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
Click to expand...
Click to collapse
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Glad it works.
Thanks for reporting the problem with the German letters. This probably means it would be a problem with other characters as well. I will check this issue and see if I can correct it in next release.
Bib_x said:
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Click to expand...
Click to collapse
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Thx for the suggestion. I'll see what can I do.
Bib_x said:
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Click to expand...
Click to collapse
Yep. Already reported by citychannel. See first post under known issues.
Bib_x said:
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Click to expand...
Click to collapse
Thx for the information. This will facilitate tracking down the error and how to resolve it.
citychannel said:
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
Click to expand...
Click to collapse
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
It already works...
I have a profile called "away" which I use to set timer-events when I am not at home. Set up a new profile and in the IP-address-field, just write your DynDNS-address and in the Port-field the port you are using.
You might, of course, need to enable portforwarding in your router-settings.
Hope this helps.
^^MeX^^ said:
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
Click to expand...
Click to collapse
A little bit offtopic:
Do you know which ports i have to forward in my router if i want to stream my dreambox-tv-program over internet with vlc?
Streaming in LAN works well, but i want to watch TV outside my home, too.

[APP][CAB]Find parking lots (and view which is free of charge !)

REQUIREMENTS
Devices running Windows Mobile 5 or later (touch screen).
Internal GPS.
Car charger (for FindMyCar functionality).
Microsoft Compact Framework 3.5
DESCRIPTION
ParkingAssistant includes three functions:
Find A Parking Lot – Shows parking lots in your vicinity.
The basic parking lots data was collected from openstreetmap project.
The green parking lots were reported by users as non-paid parking lots.
Report Parking Lots - In our project we will try to refine the data concerning non-paid parking lots accuracy and contribute the data back to the openstreetmap project using your help.
Find My Car – Estimates automatically where and when you last parked your car.
ADDITIONAL FEATURES
Your speed is displayed on the Windows Mobile Today Screen.
GPS is kept "hot" when connected to the car charger - meaning that you get immediate fix when launching navigation software or any other software that uses the GPS.
You can now see the time that has elapsed since you last parked your car.
INSTALLATION PROCESS
Install ParkingAssistant cab file to the device memory (not to storage card).
Run ParkingAssistant from the programs list.
BRIEF USER GUIDE
The ParkingAssistant application is now running at the background. To bring
ParkingAssistant to foreground us one of the following:
1- Click on the ParkingAssistant Today Screen item.
2- Click or on the ParkingAssistant task bar icon at the bottom of the screen.
3- Select the program again from programs window.
4- Use task manager window to show the list of running programs and select ParkingAssistant.
Click on the FindAParkingLot icon. If GPS signal is available your location and the parking lots in your vicinity will be displayed on a Google map (blue balloon – your location, green balloon – reported as free of charge parking lots, yellow balloon – unknown/paid parking lots).
ParkingAssistant application runs in the background and uses the GPS to estimate where you last parked your car. The GPS is activated mainly when connected to a car charger to eliminate battery drain.
Once ParkingAssistant succeeds in estimating your car's position, the car position can be displayed on a Google map - for that an internet connection is required.
To find your parked car, click on the FindMyCar car icon (on the left). Your car's location (red balloon) and your location (blue balloon - if GPS signal is available) will appear on a Google map.
Click the ‘X’ icon to bring ParkingAssistant back to the background.
You may kill ParkingAssistant temporarily (till next device reset) by clicking "kill" in the settings window. You can remove it totally simply by uninstalling the application.
ParkingAssistant uses a virtual GPS port meaning that other applications can access the GPS at the same time. However there might be older navigation software that do not work in this mode. You can try to do a GPS port re-search in your navigation software or kill ParkingAssistant
DOWNLOAD
Download the latest version from here:
http://www.anagog.com/d.php
(Can be downloaded directly from the device)
Additional information:
http://www.anagog.com
If you have any questions, suggestions, bug reports,
Please post them here.
Enjoy!
Looks nice. Thanks.
I'm a mapper of OSM, nice to see another implementation of ours data!
Been trying out this app for a few times and it is working very nicely.
Thank you very much. It looks and run very smooth. THX
will this work in the UK
bonsaiboyz said:
will this work in the UK
Click to expand...
Click to collapse
Yes, ParkingAssitant works all over the world.
I have tested it and it works perfect!!!
Hi ishimoto,
Very nice looking release. I'm really happy with it!
I have tested it and it works!!!
Today I uploaded about 9000 new parking lots, will keep adding new parking lots every few days.
Why is the application running in the background?
Hi ishimoto,
Why is the application running in the background?
Thanks.
gens said:
Hi ishimoto,
Why is the application running in the background?
Thanks.
Click to expand...
Click to collapse
The reason for having the application run in the background is for the sake of Find My Car functionality. The idea was to provide a general solution for parking issues which caters for both FindAParkingLot and for FindMyCar, however if this is bothering users, it is be possible to split the application into two - FindAParkingLot (which doesn't run in the background unless the user invokes it) and the old FindMyCar.
this is pretty cool i'm goin to keep an eye on this thread
Trying it RIGHT now !
GREAT JOB

Accessing Android device that has no physical buttons and executes custom app.

I have recently purchased an IQ Panel 2 (Android 5.1.1) home/office/etc. Alarm system.
I assumed I would have access to the full Android OS, not root access, just basic access like all phones and tablets. (this is NOT the case)
The Tablet/device starts with the power button and from there goes directly to the custom alarm software app.
There are NO physical buttons (other than the power button) that I can see on the board inside the case.
There is a USB port but apparently it is only for charging.
The device supports Bluetooth but only via the app and not the actual 'Bluetooth Settings' screen on Android and therefore I am unable to pair a Bluetooth keyboard or mouse.
I have the desire to add Tasker and a custom launcher such as NOVA launcher so that I can have even greater control over my Z-wave and Bluetooth devices as well as additional custom notifications etc.
A port scanner shows port 8883 open but I believe that might be for z-wave communication?
The device has expansion slots on the board. 2 are in use and a 3rd is open for a secondary image sensor and a 4th is for future expansion.
Any suggestions on how to proceed would be of immense help.
I hate the idea of returning this device because of this limitation.
I have spoke with the manufacturer Qolsys and they informed me the end-user is blocked from these features for obvious reasons.
There is a youtube video detailing everything about the device: Qolsys: IQ Panel 2 Technical Webinar (Can't post links yet)
Thanks in advance for any help.
26 views but no responses?
anyone have any ideas?
IIIHomieIII said:
26 views but no responses?
anyone have any ideas?
Click to expand...
Click to collapse
contact me i have same device
Contact..
Wondering?
I just got a Qolsys IQ Panel 2. I feel the same way. Were you able to root the Panel? Using the full Andriod opens the door for a better IQ Panel.
melmel1989 said:
contact me i have same device
Click to expand...
Click to collapse
Could you also help me with this iq panel I recently got it and want full features
Update
No, unfortunately I was never able to get basic access or root access but I did accomplish the original features I wanted via an older Android phone on wifi only that I use in conjunction with the IQ Panel 2.
The secondary phone runs a few apps and sits in a separate room with the screen dimmed to near black/hardly visible screen brightness.
It performs the following functions:
Custom voice commands including disarming the IQ Panel on a weekday morning schedule at 7am and/or by talking to the Google Assistant via my personal phone or a family member's phone or a Google Assistant speaker of which we have several throughout the home.
Turning on the smart thermostat when the temperature in the home is above or below a certain temperature.
Opening the garage door via voice command and being alerted when it is open or left open as if it were a window or door sensor.
Setting voice profiles so when opening the garage door or disarming the IQ Panel only that person's voice works. My voice or my wife's but not guests or the kids voices control these functions.
Being able to have the alarm disarmed by my children's phone via Bluetooth but having the alarm disarmed notification go to email instead of text.
(Necessary because through the Alarm.com website limited settings.. my kids would be notified everytime we get home and since they don't live with us anymore that would be annoying to them daily to get texts but they still need to know the alarm had been disabled by the their Bluetooth phone proximity to the IQ Panel and email only when their phones are in proximity and disarm the alarm. Email solves this.
All of this could have been done with just the IQ Panel if we had basic access not even root but one older Android phone from the past that stays plugged in at all times solves the dilemma.
I do this by running the Autovoice app on the extra phone. Autovoice integrates with Google Assistant and between those two apps, Tasker app, the Alarm.com app, smart thermostat app, Auto-input app, and Autonotification app, Tasker send mail add-on plus a little time and setup it works flawlessly.
I believe this was less then $20 total for all apps.
Basically you can have the Autovoice app set predefined voice specific commands interact with the IQ Panel alarm.com app notifications and respond to those notifications with a predefined event.
My service is not monitored but to use the Bluetooth proximity alarm disarm feature built in to the IQ Panel 2 system you have to at least have basic service which I pay $14 a month to Geoarm.com. This also gives me the Alarm.com website service where I can set other rules that the alarm follows and the spare Android phone interacts with.
The Apps have widgets on the screen of the spare Android phone. If the IQ Panel 2 sends a notification via the app, the Autonotification app sees this and launches the Auto-input app which presses one of several widgets on the spare Android phone (as if I opened the Alarm.com app and pressed buttons/widgets myself)
It would have been nice to integrate this into just the IQ Panel 2 but about an hour of setup and configuration with an old phone on wifi only, the right apps and $40 ($20 for apps and $20 for a Google Assistant speaker) works too.
Hopefully this breakdown will help anyone with an IQ Panel 2.
Final thoughts:
I have 2 of these systems, one in my office and one at home. Since the office environment is not a family enviroment and a much more set schedule (closed at night etc.) None of this is necessary and the IQ Panel 2 works fine right out the box. With today's smart homes like mine with smart cameras, smart lighting, kids and pets with doors and windows opening at random times I think they should give us basic app installation rights on the IQ Panel 2 but..
I love this thing either way ?
I have tons of these alarm panels. I haven't tried to flash them, but assuredly it can be done.
My thoughts.
*The open port you have noticed is definitely not zwave, zwave doesn't use tcp/ip nor its ports of comm. That open port is likely a ssh or vpn to alarm.com or qolsys server for updates (tftp?)
*USB port. Have you tried using a OTG atapter? Doubt you will be able to put into debug mode for adb, but might see if you can connect with adb. Also think JTAG. But you could likely flash its firmwars the same way updates are pushed. Dust off your *nix box, run wireshark, may have to do a mitm to strip ssl, sniff out the server, intercept the update file, md5 checksums, spoof server on airgapped network, etc. But if they can update it, you can break into it.
I have been working on trying to figure out the Qolsis IQ panel. I found that it listens on two ports, 8883 and 12345.
8883 is MQTT however it requires a valid client certificate to connect which I'm trying to see if I can find.
12345 is a TCP websocket, you can connect to it with curl like curl -k https : / / 192.168.x.x:12345 and you will get a json stream of alarm events.
If you'd like, we have a thread on the Home Assistant forum where we are trying to figure this out too.
If you go to the home assistant community and search for qolsys you will find our post (I can't post links yet)

Anyone helping building a new companion app to send data to the Stratos/Pace Watch?

Hi there,
i'm trying to build a companion app similar to watchdroid with wich i can send data to the watch and display them on a widget/springboard.
In my case i wan't to have my blood glucose level on my watch as i was used to with my android wear watch.
I have a simply app made with taske wich can read out a json from my nightscout site. This sadly work only via wifi.
Main problem is the bluetooth comunication. i've tried so many simply bluetooth apps and librarys via sideload. I can't even tell how many. Non of them worked out. Only some worked in watch to phone direction but not the other - desired - way. In almost every case, my phone could'nt even find the watch.
But since watch droid got it working, i know there is a way.
There is another way to get data to the watch: the notification system. Since i also could'nt get the notification listener to work on the watch, it is also not a starting point for me.
Last chance i see is automizing watchdroid and sending a file at a regulary scedule and reading this from the widget.
For the moment i just use Notify and fitness cause the Phone notification with my glucose level is persistent and the huami app ignores persistent notifications.
But get a new notification with my glucose level every 5 Minutes. On the phone the notification gets just updated, on the watch i get a new one. Over the day the notification stack gets fuller and fuller...
I'm not talking about geting this into a watchface, thats the next step after the next hundreds of steps.
Any help and tipps are welcome.
When a notification is dismissed on the phone, it should dismiss on the watch.
If you have the source to this app, you could make it dismiss it's notification and send a new one.
Klaus3d said:
Hi there,
i'm trying to build a companion app similar to watchdroid with wich i can send data to the watch and display them on a widget/springboard.
In my case i wan't to have my blood glucose level on my watch as i was used to with my android wear watch.
I have a simply app made with taske wich can read out a json from my nightscout site. This sadly work only via wifi.
Main problem is the bluetooth comunication. i've tried so many simply bluetooth apps and librarys via sideload. I can't even tell how many. Non of them worked out. Only some worked in watch to phone direction but not the other - desired - way. In almost every case, my phone could'nt even find the watch.
But since watch droid got it working, i know there is a way.
There is another way to get data to the watch: the notification system. Since i also could'nt get the notification listener to work on the watch, it is also not a starting point for me.
Last chance i see is automizing watchdroid and sending a file at a regulary scedule and reading this from the widget.
For the moment i just use Notify and fitness cause the Phone notification with my glucose level is persistent and the huami app ignores persistent notifications.
But get a new notification with my glucose level every 5 Minutes. On the phone the notification gets just updated, on the watch i get a new one. Over the day the notification stack gets fuller and fuller...
I'm not talking about geting this into a watchface, thats the next step after the next hundreds of steps.
Any help and tipps are welcome.
Click to expand...
Click to collapse
Hello,
what application do you use to get a notification every 5 minutes ??? you use a FreeStyle Free blood glucose sensor ??? I will be very happy to read you to know if you succeeded !!!
astrarico said:
Hello,
what application do you use to get a notification every 5 minutes ??? you use a FreeStyle Free blood glucose sensor ??? I will be very happy to read you to know if you succeeded !!!
Click to expand...
Click to collapse
Yes, it's freestyle libre with ambrosia blucon nightrider for nfc readout and transmission every 5 min. The app i use is xdrip+.
The notification is persistent to keep the data collector service running, to show the value on the notificatiin icon even on the aod of samsungs.
Klaus3d said:
Yes, it's freestyle libre with ambrosia blucon nightrider for nfc readout and transmission every 5 min. The app i use is xdrip+.
The notification is persistent to keep the data collector service running, to show the value on the notificatiin icon even on the aod of samsungs.
Click to expand...
Click to collapse
ah yes anyway, the price of "ambrosia blucon nightrider" as we say at home "it stings the eyes". before you give me the answer I was wondering how you did to get back the FreeStyle scan, so I understand. on the other hand to use the nightscout, it is a little the course of the fighter ... a lot of account to create. damage that the app glimp or other does not regroup suddenly!
It's currently my intention to build a framework for both phone and watch to allow apps to get data from the internet at some point in the next few months. I'm stuck with work to do at the moment so don't have any time to put towards projects (especially not big ones like that) but in the future - probably
I'd ideally also like to get Android Wear (not Wear OS, it's an old version) working too, to allow at least some companion apps to function (Sleep as Android, Keep etc.). I've got the framework working fine (which does improve app compatibility, but no communication still severely limits what they can do), but the two way Bluetooth connection throws an error that I cannot find any documentation about, so it's on hold for now until I have sufficient time to investigate properly
This would be awesome to have a framework like this. In my case i would'nt even need real internet access, due to the web service is localy provided by the xdrip app. But this would open so many things and possible options to code. Let me know if i could help. I'm also short in time but willing to help.
Getting Android wear working on the pace/stratos would also be great. I tried out sideloading the micro apk for wear of xdrip+ and it worked out better than expected. No crashes from the app and even the integrated watchfaces were selectable. Of course there were no data shown and no low power watchface.
Klaus3d said:
Getting Android wear working on the pace/stratos would also be great. I tried out sideloading the micro apk for wear of xdrip+ and it worked out better than expected. No crashes from the app and even the integrated watchfaces were selectable. Of course there were no data shown and no low power watchface.
Click to expand...
Click to collapse
It might actually be possible to build a newer version of Android, source code exists for the CPU and MIPS sources exist all the way up to Oreo, but again that would take time I don't have (and space for that matter)
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
https://github.com/edotassi/AmazMod
https://github.com/edotassi/AmazModService
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Klaus3d said:
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Click to expand...
Click to collapse
Hi, great news. Will this work on Amazfit BIP ?
Since the Bip does not rely on the AmazFit Watch app, i'd say no.
Can you show on the photo the indications of the xdrip on the watch? how it works.
Hi, i'm now trying to integrate quinnys library into xDrip, to make thinks easy and to allow 2 way communication.
Since xDrip is a really big and complex project + i'm a noop i'm having trouble with providing a switch in the menus and finding the right place to start the service from. Maybe someone can help me out again.
I am also really interest of amazfit bit. I saw now, xdrip have one section called "amazfit synk service" look like can connect with this kind of phones. Are there news to see the value on the display?
Tapiocapioca said:
I am also really interest of amazfit bit. I saw now, xdrip have one section called "amazfit synk service" look like can connect with this kind of phones. Are there news to see the value on the display?
Click to expand...
Click to collapse
None of this will work with the Bip, it's too limited
Is there any way to implement the clockscreen or widget from Glimp instead of XDrip on the Stratosphere. I'm getting better use from Glimp and MiaoMiao.
Klaus3d said:
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
https://github.com/edotassi/AmazMod
https://github.com/edotassi/AmazModService
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Click to expand...
Click to collapse
You should ask this the devs of glimp.

[APP] Standalone navigation app for Wear OS!

I made a standalone navigation app for Wear OS! Here's the link to the app: https://play.google.com/store/apps/details?id=uk.co.onibaku.standalonewearmap
Here's the full description on the app so you can get a glance at the features:
Users can type in a location, or long press on the map to input a destination. They can choose to travel via walking, cycling or car.
The app will navigate the user from their current location to the destination using turn-by-turn navigation. Each step is highlighted on the path, with text to show you what action to take, and how long until you reach that step. The map rotates along with the device, so will follow the forward-facing direction of the watch.
The app only needs an internet connection for the initial retrieval of the directions. After that, it solely relies on GPS until the user arrives at the destination.
This (obviously) only works on watches that have GPS.
If you have any suggestions at all, I'd love to know them.
The next feature I plan to implement is importing a GPX file in from Google Drive, so you can navigate a more unorthodox/scenic route, which would suits cyclists. I initially developed this for when I go cycling, as we don't usually want to take the fastest route somewhere.
Let me know if there any burning features that are needed in this, and I'll do my best to deliver. This is a small side-project, so I don't have too much time to work on it, but I find it quite useful personally, and I hope others will, too.
Someone suggested I release a demo version so people can try it and see if they wish to buy it. I have released one here
It only has the dropped pin functionality, and only allows walking as a navigation mode. The zoom is also locked.
Gentatsu said:
I made a standalone navigation app for Wear OS! Here's the link to the app: https://play.google.com/store/apps/details?id=uk.co.onibaku.standalonewearmap
Here's the full description on the app so you can get a glance at the features:
Users can type in a location, or long press on the map to input a destination. They can choose to travel via walking, cycling or car.
The app will navigate the user from their current location to the destination using turn-by-turn navigation. Each step is highlighted on the path, with text to show you what action to take, and how long until you reach that step. The map rotates along with the device, so will follow the forward-facing direction of the watch.
The app only needs an internet connection for the initial retrieval of the directions. After that, it solely relies on GPS until the user arrives at the destination.
This (obviously) only works on watches that have GPS.
If you have any suggestions at all, I'd love to know them.
The next feature I plan to implement is importing a GPX file in from Google Drive, so you can navigate a more unorthodox/scenic route, which would suits cyclists. I initially developed this for when I go cycling, as we don't usually want to take the fastest route somewhere.
Let me know if there any burning features that are needed in this, and I'll do my best to deliver. This is a small side-project, so I don't have too much time to work on it, but I find it quite useful personally, and I hope others will, too.
Someone suggested I release a demo version so people can try it and see if they wish to buy it. I have released one here
It only has the dropped pin functionality, and only allows walking as a navigation mode. The zoom is also locked.
Click to expand...
Click to collapse
This is looking really good. I want true standalone navigation on my Huawei Watch 2 4G. It has a sim so loads the route standalone and seems to be able to do everything expected...i'm trying the demo version now.
One question though...unless i'm missing something..how do you exit the app? I'm currently having to force close it.
(And as a side note have you checked out the Wear OS app Ghostracer? You can import a gpx file and follow your progress on a map on the watch. Maps are downloadable to the watch, although ive never tried that. My watch has a sim so updates the map as im riding using the watches data. Heavy on the battery though.)
ruggs1234 said:
This is looking really good. I want true standalone navigation on my Huawei Watch 2 4G. It has a sim so loads the route standalone and seems to be able to do everything expected...i'm trying the demo version now.
One question though...unless i'm missing something..how do you exit the app? I'm currently having to force close it.
(And as a side note have you checked out the Wear OS app Ghostracer? You can import a gpx file and follow your progress on a map on the watch. Maps are downloadable to the watch, although ive never tried that. My watch has a sim so updates the map as im riding using the watches data. Heavy on the battery though.)
Click to expand...
Click to collapse
I had not realised that the app does not cease to use GPS whilst it is in sleep mode, so I have added a button to exit the app properly when you drag down. I've just released it now.
I have had a look at it, but it doesn't seem to work unless you have an android phone. I am currently looking into offline maps and importing GPX files. Do you know if it does that via the android app, and how it imports it? I was looking to use Google drive, as that seems to be the only viable storage solution supported on Wear atm.
Gentatsu said:
I had not realised that the app does not cease to use GPS whilst it is in sleep mode, so I have added a button to exit the app properly when you drag down. I've just released it now.
I have had a look at it, but it doesn't seem to work unless you have an android phone. I am currently looking into offline maps and importing GPX files. Do you know if it does that via the android app, and how it imports it? I was looking to use Google drive, as that seems to be the only viable storage solution supported on Wear atm.
Click to expand...
Click to collapse
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
ruggs1234 said:
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
Click to expand...
Click to collapse
Great . I did play around with the ambient mode, but it was just the same as the standard google maps ambient mode. It takes away the turn-by-turn, location, and path. If I could persist these, and set the GPS to update every 30 secs - 1 minute, I'd probably keep it, but I'm not sure how. I'd like to stick in options to set the GPS update frequency, or have the screen turn back on only for upcoming turns.
That's really cool! That's essentially what I would have liked on my watch but standalone. I really don't like the idea that you HAVE to use a companion app, especially when it's not available for iOS. I know they're competing watches, but I love the price point of android watches compared to Apple's, and their features shouldn't pale in comparison by way of hardware.
How does their ambient map work, if you don't mind me asking? I'd like to look into it. What does their paid version allow you to do? I only had a paid version before someone mentioned to put the free one on, just to give people a flavour of it. I tried to emphasise the main bit, which was the turn-by-turn navigation. The search and other transportation modes were secondary.
Cheers for the feedback and suggestions, though! I really do appreciate it! Let me know if there's anything else you'd like.
Gentatsu said:
Great . I did play around with the ambient mode, but it was just the same as the standard google maps ambient mode. It takes away the turn-by-turn, location, and path. If I could persist these, and set the GPS to update every 30 secs - 1 minute, I'd probably keep it, but I'm not sure how. I'd like to stick in options to set the GPS update frequency, or have the screen turn back on only for upcoming turns.
That's really cool! That's essentially what I would have liked on my watch but standalone. I really don't like the idea that you HAVE to use a companion app, especially when it's not available for iOS. I know they're competing watches, but I love the price point of android watches compared to Apple's, and their features shouldn't pale in comparison by way of hardware.
How does their ambient map work, if you don't mind me asking? I'd like to look into it. What does their paid version allow you to do? I only had a paid version before someone mentioned to put the free one on, just to give people a flavour of it. I tried to emphasise the main bit, which was the turn-by-turn navigation. The search and other transportation modes were secondary.
Cheers for the feedback and suggestions, though! I really do appreciate it! Let me know if there's anything else you'd like.
Click to expand...
Click to collapse
Ghostracers ambient map is black background with white markings until you lift your wrist...but that might not work when using your app while driving (watch off the wrist?).
I've now purchased your app (Google made that hard work!)...all still good. One question...when I zoom the map in the map un-zooms straight back. Any way to make the zoom stick?
ruggs1234 said:
Ghostracers ambient map is black background with white markings until you lift your wrist...but that might not work when using your app while driving (watch off the wrist?).
I've now purchased your app (Google made that hard work!)...all still good. One question...when I zoom the map in the map un-zooms straight back. Any way to make the zoom stick?
Click to expand...
Click to collapse
Do the markings include the path/trail? I've used the black background one before, and the building outlines are (kinda) white. Yeah, I do have my watch affixed to my handlebars on my bicycle.
Great - Thanks! It's much appreciated! How come it was hard work, if you don't mind me asking? Ah, yep. That was one of the first things I forgot to change! I completely forgot about it! I've made it so that if you zoom/pan, it'll stick unless you press the "my location" button again.
Huawei watch 2 built-in GPS not working anymore
ruggs1234 said:
Thankyou for the exit button, works great. Having tested the demo app i'm happy, and I will purchase. One further comment, the battery drain is heavy, as expected. Any chance of an ambient mode while the map is running to save battery? I may be pushing my luck, but I can only ask!
Ghostracer does indeed need a companion Android app on the phone. The gpx file is loaded into the app on the phone (using a file manager) then passed to the Ghostracer app on the watch. Maps are treated the same, but I just use the data from my sim in the watch to load maps as I ride when needed. You can follow a gpx route standalone on the watch in a similar way to following the route on your app. I am not connected to Ghostracer in any way, I just think its a wonderful app for cyclists and runners (within the watches battery limitations). And the free version allows you to test all its features. It might not be right for you, but it was worth a mention based on what you said earlier. (And the map screen has an ambient mode.... )
Click to expand...
Click to collapse
Hi ruggs1234, it was a long time since you wrote your experience with this app. I downloaded the demo today and I tested it. Looks like since last Google's update, the huawei watch 2 doesn't use its built-in standalone GPS. Please, would you mind to check whether you are having this problem now? The only way I got it work was by connecting the watch to a phone through Bluetooth.
Kind regards, Angel
angelrc96 said:
Hi ruggs1234, it was a long time since you wrote your experience with this app. I downloaded the demo today and I tested it. Looks like since last Google's update, the huawei watch 2 doesn't use its built-in standalone GPS. Please, would you mind to check whether you are having this problem now? The only way I got it work was by connecting the watch to a phone through Bluetooth.
Kind regards, Angel
Click to expand...
Click to collapse
Hello Angel,
The app still works ok on my watch, I tested it yesterday.
With my phone switched OFF I use my watches inbuilt sim to start the route (the app needs data to download the initial route, it can use the connected mobile but mine was switched off). I then switch off the sim in my watch and follow the route using only the gps in the watch. The app worked as it always has.
HOWEVER, my watch isn't running the latest version of Wear OS (it's running Wear OS 2.0, Home app 2.16). I never update anything Google if i'm not forced too, their updates often break more things than they fix. Everything I use on the watch works great and i'd like it to stay that way....
Hi,
well, I gave it a test (full paid version) - TicWatch 3 Pro 4g/LTE (all up to date). It doesn't work. All tested in standalone mode (no phone involved).
- app crashes when there is no GPS fix (GPS is on, but no fix yet)
- when I set an route to navigate (pin or search) it just endlessly shows progress circle and nothing else happens (GPS on with fix, LTE on and working)
So...
BR, Doman.
I installed the Demo version on my ticwatch 3 pro gps (updated everything to current versions and no modifications (yet))
App is starting, map is not showing, just the gps location button on the left and a white/grey screen. I can pin a location on the white screen and its actually getting a location next to me and tries to route there - but without any map showing.
Any app for Gear S3 ?

Categories

Resources