I have bootloader code but i dont unlock mate 10 bootloader, i tried everything but i dont. I unlocked before
screenshot like this please help me
sezar61 said:
I have bootloader code but i dont unlock mate 10 bootloader, i tried everything but i dont. I unlocked before
screenshot like this please help me
Click to expand...
Click to collapse
boot into system, go to settings and enable developer settings, then enable oem unlock and reboot to bootloader. then you can unlock it
DeeZZ_NuuZZ said:
boot into system, go to settings and enable developer settings, then enable oem unlock and reboot to bootloader. then you can unlock it
Click to expand...
Click to collapse
thanks but i tried it,
OEM unlocked
USB Debugging ON but not works
i rebranded phone ALP-AL00 to ALP-L29 before
IS rebranding change bootloader unlock code ??
If you did it with funkyhuawei I think you are screwed. Read in the funky thread that rebranding changes something so fastboot can't read the imei correctly.
mikaole said:
If you did it with funkyhuawei I think you are screwed. Read in the funky thread that rebranding changes something so fastboot can't read the imei correctly.
Click to expand...
Click to collapse
yes i did it funkyhuawei
Already asked in the huawei thread if there is a solution.
Hope there is. Not intend to unlock again, because I tested all custom out there, but maybe I need to later.
mikaole said:
Already asked in the huawei thread if there is a solution.
Hope there is. Not intend to unlock again, because I tested all custom out there, but maybe I need to later.
Click to expand...
Click to collapse
i solved the problem with this tutorial to 4 credits its too easy and reads code few seconds
funkyhuawei changes bootloader code
http://hcu-client.com/read-bootloader-code-huawei-phone/
sezar61 said:
i solved the problem with this tutorial to 4 credits its too easy and reads code few seconds
funkyhuawei changes bootloader code
http://hcu-client.com/read-bootloader-code-huawei-phone/
Click to expand...
Click to collapse
I also rebranded with Funky Huawei and this helped me to unlock my bootloader. Totally worth the 5 USD or 4 Euro. Thanks.
Related
i have x10a that is not unlocked(i.e still locked to AT&T).
can i use the bootloader unlock tool or should i wait.
thanks
edit: i unlocked bootloader using qsd8250_semc and it worked fine.
I have a similar question.
I've unlocked my x10 through imei unlock. Any problems to use the bootloader unlock?
i think you should wait.
as stated you must be unlocked using setool to use the bootloader unlock
yamaha111 said:
i think you should wait.
as stated you must be unlocked using setool to use the bootloader unlock
Click to expand...
Click to collapse
that's what i was thinking, if in a couple of days nobody tries to unlock bootloader having the sim unlocked with imei method (the only one available a year ago) i will ask the devs.
thank you
Actually, no need to be unlocked your sim can still be locked. What will happen is if you unlock the bootloader using the_laser method...you won't be able to unlock sim in the future as of now. If your sim is still locked and you don't care about unlocking sim...go ahead and unlock bootloader if you want.
If you unlocked your phone using third party to get imei number and what not...then you most likely cannot/should not try and unlock bootloader, atleast not until someone releases a fix that allows you to do so without losing radio signal.
the_laser actually posted a file that allows you to see if your eligible for bootloader unlock.
EDIT: didn't see your edit...haha oh well will leave this here for someone else.
I'll try tomorrow with the tool to know if i can use it and post the result here. Thank you
Ok, yes please post reply, I would like to know. I also read it shouldn't wipe anything... still ain't safe in unlocking it lol
i've tried with the tool to know the lock certificate and as i unlocked the phone with code, not with other tools i can unlock the bootloader. If you have unlocked your phone through imei code, at least for me, you can unlock the bootloader
I can confirm it works via the method in the OP of this thread for x10a on AT&T. Just follow the directions EXACTLY. Worked first try for me
http://forum.xda-developers.com/showthread.php?t=1254087
dgiaffe said:
Ok, yes please post reply, I would like to know. I also read it shouldn't wipe anything... still ain't safe in unlocking it lol
Click to expand...
Click to collapse
No it will not wipe anything as long as you do it properly.
hhill13 said:
I can confirm it works via the method in the OP of this thread for x10a on AT&T. Just follow the directions EXACTLY. Worked first try for me
http://forum.xda-developers.com/showthread.php?t=1254087
Click to expand...
Click to collapse
Same here. I got it unlocked but had to go back to 2.1, for some reason it wouldn't move forward with the batch file after I did the BB downgrade. I still got it to work though as long as you have a general idea of the steps and what to expect next.
Hello. Recently,my Mate 10 lite broke down. I had a rom morfuZ, and I tried to upload a soft system via HWOTA, it failed. I changed the regoin, and my bootloader changed to LOCKED, can this code be somehow get somehow? The site has not worked for a long time.
Thanks all!
If you have unlocked it previously, you would have the code written somewhere? Otherwise, you have to use dc-unlocker, cost about 4EURO or 6AUD
If I never unlocked it, can I unlock it now? I mean before I can Huawei closed the bootloader website.
I just wanna bought a Mate 10 yesterday and wanna change cust.
bielawnyf said:
Hello. Recently,my Mate 10 lite broke down. I had a rom morfuZ, and I tried to upload a soft system via HWOTA, it failed. I changed the regoin, and my bootloader changed to LOCKED, can this code be somehow get somehow? The site has not worked for a long time.
Thanks all!
Click to expand...
Click to collapse
That's tricky. If you can't boot you won't be able to get a new unlock code. The reason it changed is if you use FH Rebrand tool. That tool flashes its own oeminfo which in turn will change your unlock code.
It changes imei/imei2/sn in fastboot, so old code is invalid after using it.
Cristianm4691 said:
If I never unlocked it, can I unlock it now? I mean before I can Huawei closed the bootloader website.
I just wanna bought a Mate 10 yesterday and wanna change cust.
Click to expand...
Click to collapse
If it's on May patches or earlier you can use DC-Unlocker/HCU to get an unlock code. In later firmware this option was fixed by Huawei
ante0 said:
That's tricky. If you can't boot you won't be able to get a new unlock code. The reason it changed is if you use FH Rebrand tool. That tool flashes its own oeminfo which in turn will change your unlock code.
It changes imei/imei2/sn in fastboot, so old code is invalid after using it.
If it's on May patches or earlier you can use DC-Unlocker/HCU to get an unlock code. In later firmware this option was fixed by Huawei
Click to expand...
Click to collapse
Hey man thanks! I just have ALP-L09 8.0.0.133(C40) with 5 May Security Patch. So, can i get bootloader code to change cust? Hmm, its me first time doing it (changing cust), know you any tutorial for new user? XD
My operator cust so slowly updating and just wanna night shot update, so i should to change cust to c432 i think.
Thanks again!
Cristianm4691 said:
Hey man thanks! I just have ALP-L09 8.0.0.133(C40) with 5 May Security Patch. So, can i get bootloader code to change cust? Hmm, its me first time doing it (changing cust), know you any tutorial for new user? XD
My operator cust so slowly updating and just wanna night shot update, so i should to change cust to c432 i think.
Thanks again!
Click to expand...
Click to collapse
Most likely you can. You would have to buy credits on dc-unlocker, then use HCU client to get unlock code.
When you are unlocked I would use HWOTA to rebrand. FunkyHuaweis tool will change your unlock code so you'd have to use HCU again to get a new unlock code. And HWOTA is free.
https://mega.nz/#!oeATEQQb!qiP3mYlQQgZYlaS3dbY_QCwNJ-urTKyLQ2zKOA9KP8g
But first start with getting unlock code, and pm me or ask here if you need assistance.
This page is a collection of all tricks and guides for Oppo Find X
Tricks :
a) Enable engineer mode
Code:
Press *#808#* in your Dialer to enter engineering mode
Sorry !
Will update as and when I find time and resources to work on this !
Any luck on rooting the phone?
daniel_erd said:
Any luck on rooting the phone?
Click to expand...
Click to collapse
Not yet tried, OEM Booloader unlock option is available.
I may lose all security options tied to it. Hence not yet rooted.
OEM bootloader unlock should enable the magic
prabhu1980 said:
Not yet tried, OEM Booloader unlock option is available.
I may lose all security options tied to it. Hence not yet rooted.
OEM bootloader unlock should enable the magic
Click to expand...
Click to collapse
Where is the unlock you mentioned?
barrygeorge001001 said:
Where is the unlock you mentioned?
Click to expand...
Click to collapse
Don't bother. He just reffers to 'OEM unlock' in developer options. But that doesn't do anything since we don't have fastboot. So in contrary to the OP, no, it won't 'enable the magic'
There is currently no known way to unlock the bootloader, let alone root the Oppo Find X.
Hi all, I have a problem,so I aks for a little help. I was unlocking bootloader to follow the guide for rooting but when I use flashtool to unlock the bootloader I can't put the unlocking code received from Sony cause flashtool open a windows where a code of 4 number is prewrited where I have to put the Sony's Unlocking code. And naturally I can't overwrite/erase it. Is some way to fix possible?
Thanks.
Kaminari_3DS said:
Hi all, I have a problem,so I aks for a little help. I was unlocking bootloader to follow the guide for rooting but when I use flashtool to unlock the bootloader I can't put the unlocking code received from Sony cause flashtool open a windows where a code of 4 number is prewrited where I have to put the Sony's Unlocking code. And naturally I can't overwrite/erase it. Is some way to fix possible?
Thanks.
Click to expand...
Click to collapse
Can you show a screenshot? I've never seen that happen in Flashtool. You could also test it with fast boot in a regular terminal.
levone1 said:
Can you show a screenshot? I've never seen that happen in Flashtool. You could also test it with fast boot in a regular terminal.
Click to expand...
Click to collapse
Thank you for reply. Sure, here a link of my screenshot: //postimg.cc/Jyx3bJBg
During the process this windows will open with that unlocking code and I can't modify it to put the bootloader unlocking code I receveid. (>_< )
P.s. Sorry for incompleted website link but I need almost 10 post to put one. I lost my old xda account credential and opened a new one cause this trouble.
Kaminari_3DS said:
Thank you for reply. Sure, here a link of my screenshot: //postimg.cc/Jyx3bJBg
During the process this windows will open with that unlocking code and I can't modify it to put the bootloader unlocking code I receveid. (>_< )
P.s. Sorry for incompleted website link but I need almost 10 post to put one. I lost my old xda account credential and opened a new one cause this trouble.
Click to expand...
Click to collapse
Strange. First thing to do is update Flashtool. Then try with new version.
I haven't used it to unlock the bootloader for a long time, so can't really remember the details, but I know it worked fine, and stored the code.
Maybe try double-click...
Hi,updated flashtool but not solved,also trying other solutions to modify the code but still not possible. >_<
Finally unlocked ,thanks for help.
Now I can work for root!
Kaminari_3DS said:
Finally unlocked ,thanks for help.
Now I can work for root!
Click to expand...
Click to collapse
Curious - what was the deal?
Still having same problem using flashtool but after many try and reflashing other official roms,by shell, the unlocking code worked.
u need unlock my bootloader to get to root
Is this a question, or a confirmation, bro?
twocool said:
u need unlock my bootloader to get to root
Click to expand...
Click to collapse
LinhBT said:
Is this a question, or a confirmation, bro?
Click to expand...
Click to collapse
Or a request? Hard to tell...
twocool said:
u need unlock my bootloader to get to root
Click to expand...
Click to collapse
Confusing thread, but please read the existing threads on this topic as there are a few.
You need to SIM unlock the phone before you can unlock its bootloader.
If you have the T-Mobile variant, check this thread to see if they can SIM unlock your phone:
[CLOSED][T-Mobile USA] Free SIM Unlocking Service - [OnePlus/Samsung/Google/LG/Moto]
Hello XDA, I am back at it again with the free T-Mobile network unlocks. Yep, you heard that right... 100% FREE. This service will allow you to go into your Settings and perform a network unlock. I've been doing this for over 3 years now with...
forum.xda-developers.com
Run the adb "debloater" script here if you have a T-Mobile device:
Found a chink in the armor... Just enabled OEM unlocking after 11 update...
I haven't got a lot of time to get this out before heading out on a job, so here's the nitty gritty. A few days ago I flashed over "OnePlus_Nord_N10_5G_Metro_by_T-Mobile_OxygenOS_10.5.8" to get a clean start. I then allowed 10.5.14 to install...
forum.xda-developers.com
No need to reboot, once you finish that, going into Developer options should allow you to set OEM Unlocking to whatever you want. Easy peasy.
If it is from T-Mobile, you'll need to go into bootloader to get the serial, unlock code, and IMEI to submit a ticket to Oneplus for an Unlock Token and then wait a week to get it.
You can skip all of that if it's direct from OnePlus - just toggle OEM unlocking in developer options then go into bootloader mode and 'fastboot oem unlock'.