Related
Hi people,
I've recently received my new Bluetooth Keyboard, I bought via DealExtreme.
Unfortunately, I can't get it working.
I guess, X10 simply doesn't have the needed bt profile.
I also tried, what a user wrote over there:
Finaly a did it!!...you have to mount /system read and write and copy three files to /system/xbin (hidd, hcitool and hciconfig) from code.google.com/p/androidobex/downloads/list change permission to 777. Enable bluetooht on Android and pair with the device (Paired but not connected) - to do this you have to enter de pin number on the phone (0000) and then enter the same number on the keyboard and then press enter. After this you have to open the terminal and issue the commands:
hcitool scan
(to find the address of the keyboard)
Scanning ...
DC:2C:26:B3:C6:46 Bluetooth Mini Keyboard
hidd --connect DC:2C:26:B3:C6:46
the bluetooh keyboard will stop blinking....tadaaaa!!
Click to expand...
Click to collapse
But I get errors, while using the commands.
When I type
Code:
hcitool scan
I get:
Code:
reloc_libary[1215]: 4030 cannot locate '__aeabi_ui2f' ...CANNOT LINK EXECUTABLE
So I manually searched for the hidd.
Now I tried:
Code:
hidd --connect DC:2C:26:B4:44:99
But....:
Code:
Can't open HIDP control socket: Protocol not supported
Any Ideas guys?
Android 1.6 does not support HID devices at all. My guess these files are for some Android 2.x version.
Okay, thanks for your answer.
I'll be patient in this case.
have you tried any drivers?
http://www.mymobilegear.com/AndroidKBDriver.php
or
http://www.otadrivers.com/
Hello, I was given a Gtablet by a friend. Everything is in proper working order except for the wifi. The wifi will endlessly scan, never pulling up any SSIDs. Here's what I've done to troubleshoot:
Ascertained flight mode was off (it was)
Enabled wifi through the developer options (Did nothing)
Manually enter SSID/Security information (Claims that SSID is not in range)
Reloaded the OS (He had VEGAn Tab on there. I reloaded the 5.1 Beta. I don't know what version he had on there, oops.)
After a clean install I have the exact same issue, which leads me to believe it is a hardware issue rather than a software issue. Is this common? Am I forgetting something? Would loading an entirely different ROM be of any use or do they also use the same driver?
My apologies if this has been answered previously, but in all my searching I can only find people who have this problem temporarily; a reboot fixes it for them. I haven't been able to find someone who has had this as a persistent issue.
JungleWallace said:
Hello, I was given a Gtablet by a friend. Everything is in proper working order except for the wifi. The wifi will endlessly scan, never pulling up any SSIDs.
Click to expand...
Click to collapse
I'll have to look at some logs to ascertain what your WiFi problem is.
Run the commands in this post (after rebooting the tablet) and then post the text files that're created.
rajeevvp said:
I'll have to look at some logs to ascertain what your WiFi problem is.
Click to expand...
Click to collapse
Thanks, see attached are the logs as per request. As a side note, now that I have the terminal emulator on there I tried a few commands I dug up on the internet after I looked over the logs.
Code:
$ su
# ifconfig tiwlan0 up
# ifconfig eth0 up
Both gave an error message
Code:
error: SIOCGIFFLAGS (No such device)
Also
Code:
# svc wifi enable
did not solve my issues. Oh well.
FYI:
JungleWallace said:
...I tried a few commands I dug up on the internet after I looked over the logs.
Code:
$ su
# ifconfig tiwlan0 up
# ifconfig eth0 up
Both gave an error message
Code:
error: SIOCGIFFLAGS (No such device)
Click to expand...
Click to collapse
The wireless LAN interface name on the gTab is wlan0. Hence your error messages: "No such device" for the ifnames tiwlan0 and eth0. (The latter would work for the ethernet I/F on the dock--if you had one connected.)
Also
Code:
# svc wifi enable
did not solve my issues. Oh well.
Click to expand...
Click to collapse
1. You have to look at the Android system logs (using logcat) to see the result of that svc command.
2. Your Android logs indicate that your WiFi interface is a) disabled at startup and b) then not enabled thereafter:
Code:
01-07 23:21:10.429 V/ConnectivityService( 990): Starting Wifi Service.
01-07 23:21:10.429 I/WifiService( 990): WifiService starting up with Wi-Fi [B]disabled[/B]
Suggestions:
Since this now looks like a ROM problem (ie. not HW):
1. See this thread. Run the script to disable Airplane Mode which might be causing your problem. If that doesn't work, try step 2:
2. Boot into CWM and then a) Format /cache and b) Repartition the Internal SD card (take the external one out first).
You'll lose all your current apps and data with this step, essentially reverting to a "fresh" install of your ROM.
Re-setup WiFi, time & date and other things again.
If step 2. doesn't work, report back next year, and I'll give you more commands to run then.
rajeevvp said:
If step 2. doesn't work, report back next year, and I'll give you more commands to run then.
Click to expand...
Click to collapse
Negative. Ran the airplane fix script, nothing. Reset cache/re-partitioned, still nothing. It's still endlessly scanning/shutting off/scanning.
JungleWallace said:
Negative. Ran the airplane fix script, nothing. Reset cache/re-partitioned, still nothing.
Click to expand...
Click to collapse
OK. Not one of the common simple problems, then.
It's still endlessly scanning/shutting off/scanning.
Click to expand...
Click to collapse
This is puzzling because from your last logs, it doesn't look like the wlan kernel driver was even loaded, so no AP scanning should be possible. A little background will clarify what I mean.
On all the 2.6.32.x kernels for the gTablet, the wlan driver is not compiled into the kernel. Instead, it is built as a separate kernel module which is loaded and unloaded as needed by Android (from the files in /system/lib/hw/wlan/). When the wlan driver is loaded both the kernel (dmesg) and Android (logcat) will show some characteristic messages and until the driver is inserted into the kernel no AP scanning, or other wireless functions, should be possible. And, no wlan driver-related messages in your logs tells me that the driver was likely not loaded. (Also, only after the wlan driver is loaded does it check and initialize the wireless HW. So, only after its been loaded, strictly speaking, can we rule out a HW problem.)
Sometimes the Android logs are not complete, so I want to you setup ADB on your PC, enable USB debugging on the gTablet (Setting > Applications > Development) and collect the Android logs like this from now on:
1. Power off gTab; attach the USB cable to it.
2. Open a CMD.exe window on the PC, then run this command (and keep the window minimized):
Code:
C:\> [B]adb logcat -v time > logcat.txt[/B]
After all the tests/commands have been done, restore this window and press Ctrl-C to kill ADB and terminate Android log collection.
3. Power on the gTablet. The ADB command will wait for the gTablet and keep collecting logs on the PC.
Post also the output of these commands:
Code:
C:\> [B]adb shell dmesg > dmesg.txt[/B]
C:\> [B]adb shell lsmod > lsmod.txt[/B]
C:\> [B]adb shell "cd /; find system -type f -print0 | xargs -0 sha1sum" > sha1sum.txt[/B]
Is this the ROM you currently have?
Have you applied the VEGAn 1.00 beta 5.1.1 supplement also?
rajeevvp said:
OK. Not one of the common simple problems, then.
.........
Is this the ROM you currently have?
Have you applied the VEGAn 1.00 beta 5.1.1 supplement also?
Click to expand...
Click to collapse
That was the current ROM I was using. I had not applied the supplement yet, but now I have. Still the same issue. Here are the logs.
JungleWallace said:
That was the current ROM I was using. I had not applied the supplement yet, but now I have. Still the same issue. Here are the logs.
Click to expand...
Click to collapse
In this one I can see the kernel WiFi driver being loaded, and the driver is not reporting any HW chip, SDIO bus, or other errors:
Code:
<4>[ 23.485281] sdio_reset_comm():
<4>[ 23.503617] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 23.676913] Firmware version = wl0: May 17 2010 22:38:50 version 4.218.223.1
<4>[ 23.887647] wlan0: Broadcom Dongle Host Driver mac=e0:2a:82:08:3e:81
<4>[ 23.894047] Enter wl_control_wl_start
<4>[ 23.897864] Exited wl_control_wl_start
<4>[ 23.907103]
<4>[ 23.907109] Dongle Host Driver, version 4.218.223.1
As far as the kernel driver is concrned, everything looks OK, but the Android logs still don't show any SSID associations.
What're the exact outputs of these commands? (You can post a screenshot. Mask the psk= value from the 1st output, if present)
Code:
C:\> [B]adb shell "fgrep -v '#' /data/misc/wifi/wpa_supplicant.conf | tr -s '\n'"[/B]
ctrl_interface=wlan0
update_config=1
...
C:\> [B]adb shell wpa_cli -i wlan0 driver rssi[/B]
...
C:\> [B]adb shell wpa_cli -i wlan0 driver linkspeed[/B]
LinkSpeed [I]nn[/I]
C:\> [B]adb shell wpa_cli -i wlan0 scan[/B]
OK
C:\> [B]adb shell wpa_cli -i wlan0 scan_results[/B]
bssid / frequency / signal level / flags / ssid
aa:bb:cc:dd:ee:ff 2452 185 [WPA2-PSK-CCMP] [I]YourSSID[/I]
Collect also the dmesg and logcat outputs as before.
[/FONT]
rajeevvp said:
What're the exact outputs of these commands? (You can post a screenshot. Mask the psk= value from the 1st output, if present) [...] Collect also the dmesg and logcat outputs as before.
Click to expand...
Click to collapse
See attached. Ignore my syntax errors that I underlined. I was typing wlan instead of wlan0.
JungleWallace said:
Ignore my syntax errors that I underlined. I was typing wlan instead of wlan0.
Click to expand...
Click to collapse
Those are OK since you've corrected them. But, these commands you'll have to redo:
1. In the first command (fgrep ... | tr), you've typed a '/' (forward slash) instead of what I've given in the example, which is a '\' (back-slash) character.
The correct character will remove all those blank lines. But, this is a minor typo compared to:
2. The last 2 commands (wpa_cli scan* ...), which you'll have to redo. This time without the extraneous driver argument (again, see the example)--which turns it into a completely different (and non-existent) command. This is why the output doesn't look like what I've shown.
Instead of typing the commands in manually, select and copy the command lines from the browser and paste them into the shell window.
You might also want to increase the no. of columns that CMD.exe displays: Right-click on the title-bar; choose Properties; select Layout; increase the no. of Columns to, let's say, 150.
3. That dmesg.txt file is not very useful because you've not rebooted the tablet before issuing that command.
The kernel has a fixed-size message buffer, so all the HW initialization messages printed only at system boot will be overwritten by later, and irrelevent, messages as time passes. From the timestamps, it looks like your tablet's been on for a couple of weeks, at least--I can't see any of the earlier boot-up messages.
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
laconical said:
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
Click to expand...
Click to collapse
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Hello. Thanks for the reply.
I am going to ask what are probably very obvious questions but I am a little out of my depth.
1) What does installing a custom recovery involve?
2)How would I backup the EFS directory? When I had ES file explorer I would have been able to try and find it. However, as it is I do not know how to find the directory and back it up. I have connected the phone to a windows laptop and it shows up as note3 but there are no folders or files visible in either the phone or on the card.
3) What is the procedure to "wipe everything"?
I think the final part I know how to do with ODIN. Just go to download boot and load and run odin with the ROM.
I got the BTU ROM is that not for the UK? I tried looking up what NC2 was but did not really find anything the explained what it is.
Thanks again and sorry for the ignorance on my side.
Let's put the custom recovery and all that on the back burner for now.
Was your phone unlocked from the factory or did you get it from a carrier? If from a carrier, which, and is it unlocked now or you are still using it with the original carrier? This one is for Vodaphone http://www.sammobile.com/firmwares/3/?download=27401 but if you are unlocked, it should work anyway, I believe.
Thanks to the people for their replies. I managed to solve the issue as below.
As mentioned previously I had flashed using ODIN and BTU version of N9005XXUENB7. The only other thing that was then required was to enter the recovery (I think power + volume up + home and then release power once samsung name appears). I then selected wipe data/factory. A reboot later and everything was solved.
es0tericcha0s said:
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Click to expand...
Click to collapse
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
christaph3r said:
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
Click to expand...
Click to collapse
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Same boat here. Please someone help!
woahs said:
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Click to expand...
Click to collapse
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
vbcomer said:
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
Click to expand...
Click to collapse
Update: I went ahead and successfully install the all-in-one file to the phone via Odin, but it still has the same issues. Can someone give a hint? thanks
FIX!!!
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
sorry guys bt i have the same note 3 and i delete the platform.xml file .....i did a factory reset bt nothing happened ...can u help plz
Re:FIX!
But you have to set the permissions of platform.xml as 0777.Right?
Step 5 how should it works
Android Goobie said:
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
Click to expand...
Click to collapse
Hi have next message in the install root step could you help me please
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push [-p] <local> <remote>
- copy file/dir to device
('-p' to display the transfer progress)
adb pull [-p] [-a] <remote> [<local>]
- copy file/dir from device
('-p' to display the transfer progress)
('-a' means copy timestamp and mode) adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the followin
g format:
<serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-d] [-s] [--algo <algorithm name> --key <hex-encoded ke
y> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-d' means allow version code downgrade)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all]
[-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Hello,
I recently posted several topics about this, but now my question is more general.
I have a Samsung Galaxy A5 with Android 6.0 which doesn't support natively. I saw there's a topic with some commands to run on a Samsung Galaxy S6 with Android 5, but it relies on "netcfg" command which is now deprecated and has been removed from Android 6.
I was able to get an working internet connection inside my terminal by running these new "up to date" commands :
Code:
ifconfig eth0 [IP] netmask [netmask] up
route add default gw [gateway]
ndc resolver setnetdns eth0 8.8.8.8 8.8.4.4
But outside the terminal, e.g. in Chrome app, I have a "No internet connection" error.
I also tried to do an application which executes the commands like that :
Code:
Process su = Runtime.getRuntime().exec("su");
OutputStream o = su.getOutputStream();
o.writeBytes("any command I need to run as root\n");
o.flush();
o.writeBytes("exit\n");
o.flush();
But the app freezes just after the "su" command has been issued.
So can someone tell me where am I wrong ?
Thanks in advance.
Hi guys, i successfully build from scratch a device and vendor tree for my rom, and compile CM13 with no problems.
The roms boots but i get a bootloop when it come into "starting apps". My idea is get adb working on boot proccess.
I was googling but i couldn't get working....
This is my init.qcom.rc: https://drive.google.com/open?id=0ByjBTzGuQ9FIQldHTGxBWjdtczQ
And init.usb.rc generated by CM13: https://drive.google.com/open?id=0ByjBTzGuQ9FIc1ZVNnVpTVExOE0
Thanks
Well guy i was digging around and testing ALOT with no luck. Still can't enable adb at boot.
I try adding this properties on default.prop:
Code:
ro.adb.secure=0
ro.secure=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
An this in build.prop:
Code:
ro.default_usb_mode=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
My device is a Forge TV, and it have a single usb port and no sdcard slot, so the only way to get a log is via usb...
In the stock rom, by default, starts in host mode (storage) and you have to go into config to change it into "device mode" to get usb adb working....
Probably i need to manage how the usb port starts at boot, i thought that "ro.default_usb_mode=0" was the solution...but no
Any help will be appreciated!
PS. lsusb doesn't recognize any device....only in fastboot mode
So i found out something interesting...in stock rom if i execute the command echo 0 > /proc/usb_device the device put itself in device mode and i can debug, putting that value to 1 reverts to storage.
I try to put that on init.d, or even on init.qcom.rc in the boot image with no luck....it's so frustating...
Ususally adbd should already be running this late during the boot.
Can you at least get an usb connection during boot? (check lsusb)
If you want to get at least a dmesg output during boot you could try the following:
set this in the build.prop
Code:
debug.sf.nobootanimation=1
set the following in your kernel defconfig
Code:
CONFIG_VGA_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
(not all of them are needed but I forgot which ones are and which ones are not)
add this to the kernel command line
Code:
console=tty1 loglevel=7
This should at least show some output on the phone screen itself.
To run something in the console, you could try to connect an usb keyboard or use something like a scriptable virtual keyboard.
You might need to set loglevel to 1 or 0 if you don't want it to spam your console while working on it.
ruleh said:
Ususally adbd should already be running this late during the boot.
Can you at least get an usb connection during boot? (check lsusb)
If you want to get at least a dmesg output during boot you could try the following:
set this in the build.prop
Code:
debug.sf.nobootanimation=1
set the following in your kernel defconfig
Code:
CONFIG_VGA_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
(not all of them are needed but I forgot which ones are and which ones are not)
add this to the kernel command line
Code:
console=tty1 loglevel=7
This should at least show some output on the phone screen itself.
To run something in the console, you could try to connect an usb keyboard or use something like a scriptable virtual keyboard.
You might need to set loglevel to 1 or 0 if you don't want it to spam your console while working on it.
Click to expand...
Click to collapse
Hi, thanks alot for your answer! My device is a Razer Forge TV wich is an Android TV device. It's equiped with a single full usb 3.0 port and no sdcard slot. The port works in 2 ways, by default in host mode and device mode (the mode i need to get some debug output). In the stock rom executing "echo 0 > /proc/usb_device" enable this mode and remains on reboot. But doesn't seems to work on CM (i put the command on an init.d script). lsusb reports nothing (equal in stock rom when the port is in host mode).
I test the soluton you provided, but instead of bootanimation i get a black screen then optimizing apps, starting apps and reboot (wich is my main problem)....there's no output on screen...i'm stuck on this like 10 days or more...is so annoying...thanks again
achaw said:
Hi, thanks alot for your answer! My device is a Razer Forge TV wich is an Android TV device. It's equiped with a single full usb 3.0 port and no sdcard slot. The port works in 2 ways, by default in host mode and device mode (the mode i need to get some debug output). In the stock rom executing "echo 0 > /proc/usb_device" enable this mode and remains on reboot. But doesn't seems to work on CM (i put the command on an init.d script). lsusb reports nothing (equal in stock rom when the port is in host mode).
I test the soluton you provided, but instead of bootanimation i get a black screen then optimizing apps, starting apps and reboot (wich is my main problem)....there's no output on screen...i'm stuck on this like 10 days or more...is so annoying...thanks again
Click to expand...
Click to collapse
You could try to insert a usb stick, mount it, and then write dmesg and/or adb output to it using init.rc.
Alternatively you could try to enable adb over tcp and connect that way to it.
Alos try to chose a different tty in the kernel command line.
(btw are the following three lines present in your kernel defconfig?)
Code:
CONFIG_VT_CONSOLE=y
CONFIG_TTY=y
CONFIG_VT=y
ruleh said:
You could try to insert a usb stick, mount it, and then write dmesg and/or adb output to it using init.rc.
Alternatively you could try to enable adb over tcp and connect that way to it.
Alos try to chose a different tty in the kernel command line.
(btw are the following three lines present in your kernel defconfig?)
Code:
CONFIG_VT_CONSOLE=y
CONFIG_TTY=y
CONFIG_VT=y
Click to expand...
Click to collapse
I can't mount usb or enable adb over tcp becasuse the system reboot itself at starting apps...
Right now i'm testing with your new config, switching ttys because i'm still getting black screen instead some output...
Well after some days i remember that the Forge iss equipped with a ethernet port...i feel so stupid lol...
So i was able to debug via adb over tcp.... @ruleh thanks alot for your time!
I think "starting apps" happens when zygote is started.
If it is really the case then it should be possible to mount an usb stick and write the logs to it before everything reboots.
According to the init files I have, init.${ro.hardware}.rc would be the place to do the mount+write.
Ideally /system is mounted and /system/bin is in the path to access tools like logcat and dmesg.
Otherwise you could include them in /sbin which is (in most cases) part of the ramdisk.
It would probably be something like this:
Code:
on early-boot
#mkdir /mnt/usb
mount /dev/(usb_stick) /mnt/usb
exec /system/bin/dmesg > /mnt/usb/dmesg.log
exec /system/bin/logcat > /mnt/usb/logcat.log
(I have never used the init.rc files directly so I am not too sure.)
Also did you try "write /proc/usb_device 0" instead of "echo 0 > /proc/usb_device" in the init.rc files? (preferably before zygote starts...maybe init.usb.rc?)
Or you could try to remove the lines referencing zygote from the init.rc files and see if adbd starts then or not.
---------- Post added at 20:17 ---------- Previous post was at 20:16 ----------
achaw said:
Well after some days i remember that the Forge iss equipped with a ethernet port...i feel so stupid lol...
So i was able to debug via adb over tcp.... @ruleh thanks alot for your time!
Click to expand...
Click to collapse
I wish I read this a bit earlier...... oh well