Hey Everybody, A little help would be appreciated. I'm unable to download certain apps from the playstore and come to find out it's because of something called Safetynet because I rooted my phone a while back. Well I followed steps to unroot and install Magisk but it tells me ctsprofile: False & basicintegrity: False. I have followed all the steps I could find except the last one which says to flash the stock firmware. I was wondering if I use Odin to flash G900TUVU1GQC2 instead, if that will fix my issue or do I need to flash the original stock firmware that came with the phone? I always though downgrading was a bad thing. I'm currently running G900TUVS1GPI1. Thanks in advance.
Related
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
JJEgan said:
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
Click to expand...
Click to collapse
Thanks a lot for the info. Am i going to loose installed apps, system settings, etc when doing the suggested process? Do i really need to wipe the phone before flashing the phone? I suppose i can find stock rom for my model here in the forums. Thanks!!
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
sibok said:
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
Click to expand...
Click to collapse
Get your firmware from here http://www.samfirmware.com/
then use odin to flash it, I had the same problem
Baseband is modem not firmware.
jje
Sent from my GT-I9300 using xda premium
Thanks to both for your answers. Maybe it's stupid but i'm some what more peaceful knowing other people also happened the same issue although it still feels very weird. All i did is flashing with CF-Root 6.4.
I've been looking for the stock firmware which is supposed to came with my phone at sammobile site but i'm not able to find it, although at that point ( where the phone got the same update twice, 4.0.4 ) i don't think i can trust the information provided by the phone. Under phone settings i can see Model Number is GT-l9300 and Base Band Version is i9300XXLH1 but i can't find it no sammobile site. What i find at sammobile site is I9300XXBLH1 ( notice B letter ) but i think that before this weird behaviour happened the phone showed Base Band Version I9300XXBLFB.
Is it all possible or the weird one is me?
Kickasskev, did you got 4.0.4 update twice?
Thanks again to all!
REPEAT BASEBAND IS NOT FIRMWARE nor is it firmware version .
To locate firmware try CHECKFUS .
Or stock providers roms from the sticky on XDA .
jje
sibok said:
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Click to expand...
Click to collapse
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
victorator said:
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
Click to expand...
Click to collapse
I've used checkfus and now i know my firmware.
Thanks for the step by step tips, but my phone is not rooted so i cannot use cwm, triangleapp and so. I. Annot also remove cwm manager nor supersu. I suppose i'll have to flash stock firmware first of all. Am i right?
Pretty strange, first time i rooted the device through cf-root6.4 it run flawlessly, but now i had to remove the battery after flashing ( while device was on ) and enter into recovery mode by hand which started the rooting process.
Thanks!
Hey everyone, i am not a very experienced android user by any means and i made the mistake of updating my stock ROM on my Verizon GS4 while rooted. The phone worked properly but i lost my root. I tried to revert the phone back to stock by downloading the SCH-I545_MDK_562219_Srock_restore.tar file, but when i used Odin to flash the "stock" tar file, it failed and my phone now says that there is a problem updating the firmware (something about placing the phone into recovery and into Kies.) I can still boot the phone to that display page and i can still get into "download" mode. I really need Help.
PS: I tried searching the forums but i couldn't find anything similar to my problem based on the fact that i updated my firmware...
Jakemkv said:
Hey everyone, i am not a very experienced android user by any means and i made the mistake of updating my stock ROM on my Verizon GS4 while rooted. The phone worked properly but i lost my root. I tried to revert the phone back to stock by downloading the SCH-I545_MDK_562219_Srock_restore.tar file, but when i used Odin to flash the "stock" tar file, it failed and my phone now says that there is a problem updating the firmware (something about placing the phone into recovery and into Kies.) I can still boot the phone to that display page and i can still get into "download" mode. I really need Help.
PS: I tried searching the forums but i couldn't find anything similar to my problem based on the fact that i updated my firmware...
Click to expand...
Click to collapse
Once updated, the bootloader will not allow you to revert to older images.
Grab the ME7 image from
http://forum.xda-developers.com/showthread.php?t=2357235
and flash it using Odin.
gtj0 said:
Once updated, the bootloader will not allow you to revert to older images.
Grab the ME7 image from
http://forum.xda-developers.com/showthread.php?t=2357235
and flash it using Odin.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly. I just couldn't find the image. :good: :good:
Im not sure if this is the right place to post this, but I attempted to root my phone last night, which I did successfully. My carrier (telstra, australia) is really ****ty with releasing updates so I'm still on 5.0.2. So I followed these instructions to update to 5.1.1: http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
I did that, and when my phone rebooted it got stuck on the boot screen with "Kernel rev. Check failure".
I have tried to flash my carriers stock 5.0.2 firmware with Odin, but that has currently not fixed it. Do i need to wait until they release 5.1.1? Or can I use any countries 5.1.1, for example, im currently downloading a stock 5.1.1 firmware from India. Will that work?
I don't know what else to do.
I think where I went wrong was not installing a custom kernel other than Supersu, which I now realise thats what the previously linked instructions said. I rooted with Ping Pong root, so I do have SuperSU installed on my phone, but I do not have TWRP.
I know, i'm a dumbass. What can i do?
Hello Everyone,
I'm a first time poster but have been reading this site for weeks trying to find the answer to my questions. I've acquired a good bit of info but still wanted to clarify some things before I take the plunge.
I'm currently using a Verizon GS4 (I-545) running rooted stock MK2 jellybean. I rooted ~2 years ago to get rid of the bloatware and just never bothered upgrading/keeping up with the firmware updates. There are some new apps that won't work on my phone, but are working on my wife's stock GS4 on OF1. I'd like to upgrade my firmware (and keep root) so that I don't have to keep stealing her phone.
I've come across several threads discussing upgrading from one baseband to the next - none quite match my scenario. Most threads talk about how to upgrade and keep root but now that I'm late to the party, it seems like root methods have been discovered for all stock firmware versions (even OF1 by flashing OC1 kernel, rooting, and flashing back to OF1 kernel). So with this in mind, can I just skip all the complicated stuff and just use Odin to flash OF1 and then follow Edgardo_Uchicha's OF1 root method?
If I can use Odin to flash OF1, will the file I load in the "AP" slot also includes the proper modules, bootloaders, etc. to upgrade everything to OF1? Will it do a factory reset/wipe or will I keep all my data like an OTA? As for getting the Odin file, it looks like I should just use the Samsung site to get it directly?
If I can use the Odin method, are there any drawbacks? If I don't like lollipop I realize I'm stuck and can't go back, but is there anyway to upgrade and be able to go back (downgrade)?
Thanks again for your help!
Mike
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Edgardo_Uchiha said:
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Click to expand...
Click to collapse
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
mike2914 said:
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
Click to expand...
Click to collapse
Try wiping via recovery, if I'm not wrong this package does not wipe your phone so maybe there are some leftovers that are messing up the new system
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
mike2914 said:
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
Click to expand...
Click to collapse
Download and install terminal emulator, the run these commands:
1. su
2. getprop ro.bootloader
Awesome! I was able to confirm I'm still using the MK2 bootloader. Thanks for all your help!
I am using Android 9 on my SM-T860. It is rooted. I am using TWRP.
I would like to upgrade to Android 10 with Odin and then re-root the tablet with Magisk using TWRP, is that possible? I think I read someplace that Magisk, Tab S6 and Android 10 were not fully compatible?
Assuming it was okay, do I need to flash WETA kernel and flash Disable_Dm-Verity_ForceEncrypt in TWRP again before Magisk like I did when I first got the Tab and unlocked bootloader and flashed TWRP?
I also had to hard reboot the tablet while it was building cache (it seemed to freeze and that was described in the root guide I followed) the very first time is booted up after all this rooting, would that be necessary again?
My tablet is one that has crashed several times, I hope that it's a software issue and installing new Android will fix it.
Also, why does my PC spell checker not pick up typos like on some other forum post websites? Why isn't there a red squiggly line under errors for my to right click and correct?
Hello i have an tab s6 from tmobile too i want to know if anybody has flaahed it with uk firmware or any other internatiinal firmware and it runs fine or any links to root and unlock it since i been for more than 10 month with the big T and they dont know how to unlock it any info is apreciated thanks
Actually, I think that if I flash my UK WiFi firmware then I will loose TWRP?
Aid777 said:
Actually, I think that if I flash my UK WiFi firmware then I will loose TWRP?
Click to expand...
Click to collapse
Yes. You will lose TWRP. It will be replaced with stock recovery.