Related
Hey everybody,
I just got the x10 today and I've never hacked a Sony so I know nothing about it right now, so forgive my ignorance.
The phone was used and didn't come with a sim card. I've put 2 different sim cards in it that I know are good, but when I boot up it gives me a sim card error and only let's me make an emergency call.
I'm thinking that because his data is on it, it needs his sim card? I have always had cdma phones so sim cards are new to me also.
My question is... Is their a way to get into some kind of boot menu by a button combination at startup or something, where I can delete the phone data?
Any help is appreciated.
Edit... Phone is stock, not rooted, yet
Dude,it seems ur phone is sim locked and u can't use any sim card beside sim card ov network operator that locked ur phone.
Sent from my "z10i"
neoxx3m said:
Dude,it seems ur phone is sim locked and u can't use any sim card beside sim card ov network operator that locked ur phone.
Sent from my "z10i"
Click to expand...
Click to collapse
How would that happen? The phone is legit, no outstanding bill on that account and its not stolen. Are you saying I need his sim card to unlock it so I can use another?
Just to give you more info, when the lockscreen comes up, it says "sim card is faulty" but if I hold power and select airplane mode, then turn off airplane mode, it let's me past the lockscreen and then I get a toast box that says "sim is not provisioned mm2"
The phone was on at&t when it was used. I don't have an at&t acct. For now I just want to learn about it and root/mod it. Maybe ill call at&t.
Might be another issue :
Some anti-theft antivirus programs are able to lock your phone for your sim-card only (to prevent using another sims when phone is stolen).
If its set as device-manager, it also cant be disabled (requires some password).
So, try to boot up your phone without SIM card ant check this first. If device-manager is not set, then your phone is surely simlocked.
Thanks for the reply, I've tried booting up without a sim card and it gives me an error that no sim is installed and will only let me make an emergency call.
I called at&t last night and the rep asked me to hold the menu + return buttons while pressing power and I should get an option to hard reset the phone. That didn't work so she patched me to Sony. They had me download Sony pc companion and sent me instructions to "repair" it.
He said it was 1 of 2 problems. It's a "software glitch" or a broken sim port.
If the repair won't fix it, ill have to send it in and for $185 they'll fix it (yeah right). When I get home ill try the pc companion. This phone is in mint condition and was fully working before the guy that gave it to me went to an iPhone.
wikdNoob said:
Thanks for the reply, I've tried booting up without a sim card and it gives me an error that no sim is installed and will only let me make an emergency call.
I called at&t last night and the rep asked me to hold the menu + return buttons while pressing power and I should get an option to hard reset the phone. That didn't work so she patched me to Sony. They had me download Sony pc companion and sent me instructions to "repair" it.
He said it was 1 of 2 problems. It's a "software glitch" or a broken sim port.
If the repair won't fix it, ill have to send it in and for $185 they'll fix it (yeah right). When I get home ill try the pc companion. This phone is in mint condition and was fully working before the guy that gave it to me went to an iPhone.
Click to expand...
Click to collapse
Might be both - hardware malfunction or simple simlock. Personally expect simlock. My phone is not simlocked and when turned on it can run without sim card simply as PDA.
Try to flash your phone with generic WWE ROM and try again. Or before, check if phone doesnt have usb debugging on.
Afraid that no, but try to look with flashtool or adb (if yes, we can make full wipe within xrecovery)
HeliumX10 said:
Might be both - hardware malfunction or simple simlock. Personally expect simlock. My phone is not simlocked and when turned on it can run without sim card simply as PDA.
Try to flash your phone with generic WWE ROM and try again. Or before, check if phone doesnt have usb debugging on.
Afraid that no, but try to look with flashtool or adb (if yes, we can make full wipe within xrecovery)
Click to expand...
Click to collapse
If its sim locked then I'd think that I could use the previous owners sim to get into the system, right? Then how do I sim unlock?
I can't check for USB debugging because I can't get past the emergency call only screen.
I've got the pc companion downloaded on my working phone, when I get home I a couple of hours I'm gonna xfer it to the comp and run it, hopefully that'll fix it. If not, ill wait till Monday and get the previous owners sim and try that. If that doesn't work.... I'm gonna get the night vision goggles back that I traded for this phone, lol.
Running this phone without a sim is exactly what I want, just as a pda. How'd you do it, or better yet, what it called, sim unlocking? I can look for a guide, but I don't even know what its called. I feel really dumb about this phone, sorry bout that, if you came to the evo3d forum I could give you all the help you needed.
wikdNoob said:
Running this phone without a sim is exactly what I want, just as a pda. How'd you do it, or better yet, what it called, sim unlocking? I can look for a guide, but I don't even know what its called.
Click to expand...
Click to collapse
OK then If you want to use your phone as pda, without gsm or data connection, then the simpliest thing you can do is to flash stock generic ROM (you dont have to care about baseband and so on).
However you need to do a sim-unlock first because otherwise it will be still locked on the operator. Heart about many unlocking methods on websites, eg. this one (really expensive):
http://www.mobile-unlocker.com/sony-ericsson-xperia-x10/rs2wp9/
Never tried (always buying phone without sim-lock).
What operator is your phone locked?
YOu probably have to google about your exact operator locked version, hopefully you will find unlocking code or online service for it.
BAM! I got it, thanks for all your help. I used the pc companion and chose repair, I lost all data but that's ok, I was gonna erase data anyway. When I boot up it still gives me a notif that the sim is not provisioned but I can still get into the system.
Time to start hacking away at this thing, I've got a lot to learn I'm sure. I downloaded flashtool and it says it'll root so I'm gonna try that. I'm open to any more help you can give out, you probably think that some of the easy stuff is common knowledge but even the smallest stuff will help me get started. I'm gonna start reading in the sticky section, thanks again for the replies.
Also, after the repair, I have a different lockscreen, it looks like an iPhone lock kinda. Before, I had the lock that went up and right on a curve kinda, how do I get back to that one?
wikdNoob said:
Also, after the repair, I have a different lockscreen, it looks like an iPhone lock kinda. Before, I had the lock that went up and right on a curve kinda, how do I get back to that one?
Click to expand...
Click to collapse
Now i understand why you wasnt able to get into system without sim You were on old android 1.6 which was default OS when X10i was released. But there were two big software updates - 2.1 and last year our beloved 2.3.3.
Thats why you have different lockscreen. In 1.6 it was shaped like half-circle, in 2.3 its just a simple horizontal slide... But there is not any solution how to get this lockcreen back as I know. BTW.: Also liked the old one lockcreen
Everytime you will need a help, post and we will surely help you !!
HeliumX10 said:
Thats why you have different lockscreen. In 1.6 it was shaped like half-circle, in 2.3 its just a simple horizontal slide... But there is not any solution how to get this lockcreen back as I know. BTW.: Also liked the old one lockcreen
Click to expand...
Click to collapse
Ok, I'm starting to get it now... My system info says
Firmware version 2.1-update1
Baseband 2.1.65
Kernel 2.6.29
So far I've rooted, installed xrecovery and unlocked the bl. All the roms I've looked at say I need a higher baseband to use that rom. Can I use the pc companion to update to 2.3.3, and is it gonna cause an issue since I have a custom recovery and unlocked bl? The reason I ask is because on an LG I had, it would brick if you did an official update with a custom recovery.
wikdNoob said:
My system info says
Firmware version 2.1-update1
Baseband 2.1.65
Kernel 2.6.29
Click to expand...
Click to collapse
Ohh, branded phones are really loosers It seems that your version wasnt updated to 2.3.3, on which are based all roms for X10i and X10a.
wikdNoob said:
So far I've rooted, installed xrecovery and unlocked the bl. All the roms I've looked at say I need a higher baseband to use that rom. Can I use the pc companion to update to 2.3.3, and is it gonna cause an issue since I have a custom recovery and unlocked bl? The reason I ask is because on an LG I had, it would brick if you did an official update with a custom recovery.
Click to expand...
Click to collapse
I recommend you to use Flashtool intead There are problems to get the ftf file with generic ROM, which also includes .71 baseband which is surely needed for any custom ROM. But I think this is simplier solution. If you want active link to FTF bundle I will post it (also with guide, already wrote it for another users).
You can also use PC Companion, and it surely dont affect your phone in any way. If you rooted it and installed xrecovery its surely not problem (I performed this once on my device). Dont know about unlocked bootloader (dont have it and dont want to have it ), but think thats also not problem.
You can brick X10i only if you flash kernel and something unexpected happens (cable unplug etc...).
Wow, 200th post - will celebrate my anniversary
HeliumX10 said:
Ohh, branded phones are really loosers It seems that your version wasnt updated to 2.3.3, on which are based all roms for X10i and X10a.
I recommend you to use Flashtool intead There are problems to get the ftf file with generic ROM, which also includes .71 baseband which is surely needed for any custom ROM. But I think this is simplier solution. If you want active link to FTF bundle I will post it (also with guide, already wrote it for another users).
You can also use PC Companion, and it surely dont affect your phone in any way. If you rooted it and installed xrecovery its surely not problem (I performed this once on my device). Dont know about unlocked bootloader (dont have it and dont want to have it ), but think thats also not problem.
You can brick X10i only if you flash kernel and something unexpected happens (cable unplug etc...).
Wow, 200th post - will celebrate my anniversary
Click to expand...
Click to collapse
Got it, I installed DiXpreia 7 'avenger' using xrec for Rom and flashtool for the ftf file. wow, what a difference in graphics, this is cool.
I appreciate all the time you've spent on me. Congrats on the 200th, I'm helping you stack up some thanks' too
One last thing, what's the benifit of an unlocked bl? And would it benifit me to unbrand since I have a custom Rom?
wikdNoob said:
I appreciate all the time you've spent on me. Congrats on the 200th, I'm helping you stack up some thanks' too
Click to expand...
Click to collapse
Haha, thanks bro !
wikdNoob said:
One last thing, what's the benifit of an unlocked bl? And would it benifit me to unbrand since I have a custom Rom?
Click to expand...
Click to collapse
For unlocked bootloader there is only one main benefit. You can flash any custom kernel directly. On locked bootloader you can also use custom kernel, but it uses "bypass" method - once stock kernel is loaded, special init script gives the control to custom kernel and then custom kernel is loaded. This is 100% safe for noobs and also devs (I was doing some kernelt tweaks, thats why I am on locked - if I do unloadable kernel and flash it on unlocked device... It will be bricked ). But it takes about 2x time to load the system on reboot, because you need to load two kernels instead just one. If you unlock your bootloader, you can overwrite stock kernel with custom one. And when device it powered on, custom kernel is loaded directly and loads faster then by "bypass" method. Another "benefit" is that all of CyanogenMod ROMs requires unlocked bootloader
Unlocked bootloader doesnt affect your "brand", it wont remove it. As wrote before, you need some service which offers unlocking codes or I saw saome tutorials on youtube (give a search ).
But think this is a little nonsense if you want to use your phone as PDA. "Branding" affects only gsm network and 3G data, so you cant use these features without SIM.
Thanks for the info on the locked/unlocked bl.
Now for another question. Let's say I install a Rom and kernel combo that aren't compatible, you said it'll brick. Will that be a hard/permanent brick or could I just use the pc companion and repair it.
wikdNoob said:
Thanks for the info on the locked/unlocked bl.
Now for another question. Let's say I install a Rom and kernel combo that aren't compatible, you said it'll brick. Will that be a hard/permanent brick or could I just use the pc companion and repair it.
Click to expand...
Click to collapse
On locked bl you can everytime use Flashtool or PC Companion to reapir your phone.
On unlocked mostly too. BUT, as told you. Only if you flash loader or kernel badly (bad cable, unexpected power shutdown etc.) you cant repair your phone with any software. Or, to be perfectionist You can unbrick it, using the "JTAG" connector with some "JIG" box. These hardware are hard to buy, its highly specialized devices and costs about 200€ or even more... With these tools you can unbrick any device everytime, even with damaged system ROM, or unloadable kernel. It will simply overwrite the whole NAND adress by adress, byte by byte with standart system image.
You can also use some high-level services which are equipped with this hw and could do it for you. But its also expensive.BTW. thats why I am thinking about to buy JIG box perosnally
Last thing i remember is my phone restarting everytime after flashing the 540mb OTA. So i did some stupid ****. First i did a factory reset from the stock recovery, the flashed the nougat firmware. Then i noticed that there was no internal drive, so i ran this code "fastboot flash partition gpt.bin" and my phone was dead after that.
So i took it to the service centre, and they told me that they're going to replace the motherboard. My only concern is the unlocked bootloader. After they replace the mobo, are they gonna see the unlocked bootloader warning?? coz if they do.. it'll be a mess :crying:
Surely the new mobo will have a locked bootloader again, and a new IMEI. It'd be like a new phone
Replacing the motherboard usually means an entirely new phone internally.
Which means it also has a different bootloader from the one you originally had. Chances are that it'll be locked and you'll have to unlock it again.
It's also a good idea from this point on to have a factory image for the stock firmware lying around in your desktop just in case an update causes a softbrick.
supacrazyguy42 said:
Surely the new mobo will have a locked bootloader again, and a new IMEI. It'd be like a new phone
Click to expand...
Click to collapse
Thank god
D13H4RD2L1V3 said:
It's also a good idea from this point on to have a factory image for the stock firmware lying around in your desktop just in case an update causes a softbrick.
Click to expand...
Click to collapse
I do. I have both MM and Nougat firmwares on my pc. This time it was a hard brick. And i'm not going to unlock my phone this time. There's no way to relock the bootloader.
Just got a call from Motorola. They told me that my phone is rooted and it won't be covered under the warranty :'( And they're asking for 80% of the price of the phone to repair it. My only option is to get the motherboard from somewhere and repair it myself. Can someone please send me a link to buy the Mobo for Moto z?
Hello friends of XDA, I have a big problem between hands, I have a MOTO Z and I had it in android 7.0 since last year the update to andorid 7.1.1 did not arrive and I felt that with android 7 the battery was consumed very quickly, so I tried to find the update to flash it and just about 3 days ago I found it, I proceeded to download it and flash it in fastboot and adb.
The thing is that a few months ago, browsing through my phone (I had already rotated it, and unlocked the bottloader, I decided to re-block the bootloader, and remove the root, which never worked at 100) I got into the developer options, and I saw an option that until then I didn't know about its "OEM Unlock"function, as it was turned on and deactivated because I thought it didn't work.
Returning to the update flashing I proceeded as usual, with the commands, I proceed to restart the device and show the image of the boot of motrola but then it shows me a message in red letters.
"Startup Failed"
"failed to pass validation, backup to fastboot.
I thought it was a compatibility problem with the downloaded version of 7.1.1 so again I decided to flash the stock rom 7.0 but when I finished and restart the same message appeared.
I started to investigate and it seems that the OEM blockade is responsible for not being able to install any Stock Rom, or anything, and now I have a nice brick with Moto mods and I can't use it.
I wanted to unlock OEM in fastboot but nothing. sends message from "ALLOW OEM UNLOCK IN SETTINGS"
There is way to unlock the OEM from pc or fastboot without needing to be unlocked from the android settings, as in my case it is impossible for me,
I'd be very grateful for your help friends, I know it's a bit tedious to read but it's the only phone I have and I feel weird without it on the street.:bueno::bueno::llorando:
I'm with same problem here!
Suckmymfdick17 said:
Hello friends of XDA, I have a big problem between hands, I have a MOTO Z and I had it in android 7.0 since last year the update to andorid 7.1.1 did not arrive and I felt that with android 7 the battery was consumed very quickly, so I tried to find the update to flash it and just about 3 days ago I found it, I proceeded to download it and flash it in fastboot and adb.
The thing is that a few months ago, browsing through my phone (I had already rotated it, and unlocked the bottloader, I decided to re-block the bootloader, and remove the root, which never worked at 100) I got into the developer options, and I saw an option that until then I didn't know about its "OEM Unlock"function, as it was turned on and deactivated because I thought it didn't work.
Returning to the update flashing I proceeded as usual, with the commands, I proceed to restart the device and show the image of the boot of motrola but then it shows me a message in red letters.
"Startup Failed"
"failed to pass validation, backup to fastboot.
I thought it was a compatibility problem with the downloaded version of 7.1.1 so again I decided to flash the stock rom 7.0 but when I finished and restart the same message appeared.
I started to investigate and it seems that the OEM blockade is responsible for not being able to install any Stock Rom, or anything, and now I have a nice brick with Moto mods and I can't use it.
I wanted to unlock OEM in fastboot but nothing. sends message from "ALLOW OEM UNLOCK IN SETTINGS"
There is way to unlock the OEM from pc or fastboot without needing to be unlocked from the android settings, as in my case it is impossible for me,
I'd be very grateful for your help friends, I know it's a bit tedious to read but it's the only phone I have and I feel weird without it on the street.:bueno::bueno::llorando:
Click to expand...
Click to collapse
Try to boot in Fastboot flash twrp and flash ressurection remix rom. It's great rom. Forget about locking. I had the same problem like you as I was trying to flash stock ROM and lock bootloader.
I gave up on this.
knjigo said:
Try to boot in Fastboot flash twrp and flash ressurection remix rom. It's great rom. Forget about locking. I had the same problem like you as I was trying to flash stock ROM and lock bootloader.
I gave up on this.
Click to expand...
Click to collapse
Well, when the root didn't work properly, I flashed the phone again and blocked the bootloader. Will I still be able to install TWPR or should I lose my phone?
Suckmymfdick17 said:
Well, when the root didn't work properly, I flashed the phone again and blocked the bootloader. Will I still be able to install TWPR or should I lose my phone?
Click to expand...
Click to collapse
What do you mean with "I blocked my bootloader"?
Twrp is easy to flash. Root is integrated in ressurection remix rom. And this rom is great. Just try to flash twrp in Fastboot and than ressurection remix with twrp.
Can you boot in Fastboot?
Do you remember what build of 7.1.1 you had on your device before downgrading to 7.0?
If so, I would suggest finding that firmware (the full stock firmware, not OTA updates) or newer if you can, and try to flash that. Since your bootloader is still likely from the 7.1.1 build, a locked bootloader will only permit files matching the same patch level (i.e. from the exact same stock ROM as that bootloader patch) to boot.
If not, then unfortunately there's not a lot we can do. You could wait for a newer firmware to get leaked, but as your device is unable to boot (due to failing the bootloader checks) and you cannot toggle OEM unlocking because you cannot boot, it's a nasty vicious circle that is difficult to get out of. You may have to consider sending your device for service and pay for an expensive motherboard replacement otherwise, since Motorola have a record of your device being unlocked. Your service centre experience may vary.
Only lock a bootloader after ensuring you've flashed all the stock firmware and it is all the same patch level as your bootloader. Hopefully you'll find newer firmware that you can repair with.
tjgibri said:
I'm with same problem here!
Click to expand...
Click to collapse
I solved it, I finally flashed the stock rom to my phone and it works.
Apparently my pc was not flashing the stock rom in adb, and the phone turned off when loading the software. I did it 3 times until I load correctly and start well.
if you have the same problem apparently then OEM Blocking is not responsible. You have to flash the most current rom or the one that you had by default when the brick happened to you, you flash it in a normal way with commands of adb and ready, I would have to come back to life.
download from firmware center MotoZ Griffin the most current rom stock at 7.1.1
echo92 said:
Do you remember what build of 7.1.1 you had on your device before downgrading to 7.0?
If so, I would suggest finding that firmware (the full stock firmware, not OTA updates) or newer if you can, and try to flash that. Since your bootloader is still likely from the 7.1.1 build, a locked bootloader will only permit files matching the same patch level (i.e. from the exact same stock ROM as that bootloader patch) to boot.
If not, then unfortunately there's not a lot we can do. You could wait for a newer firmware to get leaked, but as your device is unable to boot (due to failing the bootloader checks) and you cannot toggle OEM unlocking because you cannot boot, it's a nasty vicious circle that is difficult to get out of. You may have to consider sending your device for service and pay for an expensive motherboard replacement otherwise, since Motorola have a record of your device being unlocked. Your service centre experience may vary.
Only lock a bootloader after ensuring you've flashed all the stock firmware and it is all the same patch level as your bootloader. Hopefully you'll find newer firmware that you can repair with.
Click to expand...
Click to collapse
Thanks for your help friend, I finally flashed it with a recent android 7.1.1 update. Apparently the OEM lockout was not the culprit, but it was an interrupted flash of android 7.1.1 at some point when loading the software to the phone, it would shut down on its own and not complete the installation, which showed me the mentioned message. I didn't realize that and thought it was the OEM blockade.
I finally did it on another pc and it worked. the phone came back to life.
I have one Moto Z2 Force (XT1789-05), bought from coolicool.com, I didn't know device came Unlocked Bootloader, Device rom had problem with many apps, I googled and found one topic in XDA developer to Install Stock Rom, I downloaded and Installed India Rom, it's worked somehow fine, but still had problem, I downloaded Verizon Rom, Android 8, after Installed Android 8 Verizon Rom, Locked device bootloader immediately, now device stuck at Welcome Wizard in Android 8, after select language I got this message: (Please wait, this may take a few minutes) this is proof video (http://ahmn.co/Upload/IMG_0161.MOV), after this issue, device already locked, I can't unlock, because need to go to the Developer Option in Setting, I stucked in Welcome Wizard, there isn't any bypass, So, I start to search in Google, XDA-Forum, Android Central and more, I created many threads, many requests, no one can't help me, I tried to reach google developer support to the tell to me how can I bypass Android 8 Welcome Wizard, there is must be a way, but I can't find it, now I can access to Android Recovery and Bootloader
1. if you help me to FORCE UNLOCK device without need Developer Option in setting my problem will solve
2. If you help me to Bypass Android Welcome Wizard, access setting and enable OEM Unlock
3. If you help me to update the device from Android 8 to Android 9 Verizon ROM via ADB Sideload or Update from SD card in Recovery mode
4. If you have any idea to how can I fix it
Extra Information: I bought Belkin and Uni USB-C to Ethernet Adaptor to help me bypass Android 8 Welcome Wizard, I bought WSKY WIFI Adaptor because device Wifi can't find any network (I found QR setup by tap several times in Language Selection), after this section need to download google device policy apk, my device can't find any Wifi Network and my Ethernet Adaptor can't help me either, So, I just remained with my phone, and I can't do anything,
Please, someone, help me
My Device SKU: XT1789-05
Samsung A02s(SM-A025F)
I do these steps any body help
1.I unlock oem through developer option
2.I unlock bootloader successfully
3.I downloaded firmware and patch AP with magisk to root
4.I flash Patched AP
5.After getting my phone rooted successfully I want to install TWRP Recovery
6.I downloaded unofficial version of TWRP from xdaforums....
7.I followed the steps guided here
The steps are as follows
1.reboot to boot loader and flash vbmeta_disable.tar
2.Put TWRP tar in AP and flash
3.Reboot to recovery
4.Disable encryption
Go to Advanced >Terminal : type "multidisabler"
5.Go back to wipe>Format Data>type "yes"
6.Reboot system
This is my first experience to root and flash TWRP.... but after that when I reboot my phone got lock .... only official binaries allowed to be installed....and stuck there
I got frightened so I locked my bootloader
But nothing happens...
I downloaded stock firmware and flash.....now my phone works perfectly But I want to root my phone I searched and found a correct way to root but now oem unlock option is not found in developer options....
I watched hundreds of videos on yt and searched a lot on Google but
found no proper solution.....someone tell me to wait 7 days....
In about phone> phone status>uptime
Uptime should be equal to 7days... then oem unlock option will appear but ...... I want another solution date change and WiFi connect is not solution ... If any body knows any other solution please guide me ... I'll be very thankful.....
@ladlabaloch512
Perhaps your device has the same "OEM unlock" block like mine.
On mine I was supposed to wait 7d after turning on dev options.
I bypassed that by
1. switching to airplane mode
2. Setting manually date back one month
3. Restart (still in airplane mode)
4. Turning off airplane mode and let it sync date
and voila OEM unlock option was there.
Perhaps that works on your device as well.
bmwdroid said:
@ladlabaloch512
Perhaps your device has the same "OEM unlock" block like mine.
On mine I was supposed to wait 7d after turning on dev options.
I bypassed that by
1. switching to airplane mode
2. Setting manually date back one month
3. Restart (still in airplane mode)
4. Turning off airplane mode and let it sync date
and voila OEM unlock option was there.
Perhaps that works on your device as well.
Click to expand...
Click to collapse
Thanks for reply...
This bypass method doesn't work in my device
Im too
i have tried everything But I read on somewhere that policy was upgrade to 1000 hours so i waited and hopping thats work!
Now it's almost 700 and i restarted before it on 200 so it's supposed to be 900
Mahmoudm.kamal said:
Im too
i have tried everything But I read on somewhere that policy was upgrade to 1000 hours so i waited and hopping thats work!
Now it's almost 700 and i restarted before it on 200 so it's supposed to be 900
Click to expand...
Click to collapse
Keep us updated.. I'd like to get my OEM unlock to come out of hiding.. this is frustrsting.. i see all these tutorials for the A02s root, twrp and ROMs and whatnot and I'm itching to get flashing!
Is it possible to flash an unlocked carrier firmware in ODIN and then be able to unlock OEM? Without carrier issues or anything? I'm a little nervous to be the first to try.. and not sure where to find US unlocked carrier firmware or if location even matters... I have the SM-A025AZ (US Cricket variant).. I guess as long as Download Mode (fastboot) is still accessible I could just flash the Cricket version back to the device.. bricked my LG-E980 back in the day.. took me a few months how to get it back up and running with LG flash tool.. i just dont want to repeat that fiasco lol... so anybody got any updates on hacking this OEM (un)lock bs??? Or any idea on flashing some other variant to the device without interrupting carrier stuff??.. seems like alot just to get a damn virtual switch to turn on.. but damnit I need root access! Lol.. about to just exchange this phone for an actual rootable phone.. i disagree with charging for hotspot.. that should be illegal.. getting charged twice to use th same bs internet.. eff that.. i just want Rooooooot!!!
Hello,
I have also been having these troubles, with no way to unlock oem after stock flash, and the closest I've got to finding a solution was this, but I simply cannot find samsung's bootloader unlocking form like it says in the guide. I bought my phone just for a bootloader unlockable version (A025M), and now I am very angry at samsung.
also, since over a 1000 hours have gone by since last post, have any one of you solved this issue just by waiting?
Noobiu said:
Hello,
I have also been having these troubles, with no way to unlock oem after stock flash, and the closest I've got to finding a solution was this, but I simply cannot find samsung's bootloader unlocking form like it says in the guide. I bought my phone just for a bootloader unlockable version (A025M), and now I am very angry at samsung.
also, since over a 1000 hours have gone by since last post, have any one of you solved this issue just by waiting?
Click to expand...
Click to collapse
Nope, More than 2000 hours and also changed firmwares and waited again an again and tried alot of ways but enable oem still disappeared
Im also very angry from samsung
Mahmoudm.kamal said:
Nope, More than 2000 hours and also changed firmwares and waited again an again and tried alot of ways but enable oem still disappeared
Im also very angry from samsung
Click to expand...
Click to collapse
its not only samsung that does this, many other companies like motorola does this. Dont be angry, just try a different device. Also, snapdragon US models (i dont think) arent able to be unlocked. If its a mediatek model and isnt sim/carrier locked, u can try MTKClient
Swyen said:
its not only samsung that does this, many other companies like motorola does this. Dont be angry, just try a different device. Also, snapdragon US models (i dont think) arent able to be unlocked. If its a mediatek model and isnt sim/carrier locked, u can try MTKClient
Click to expand...
Click to collapse
Yes dear, i had changed it since more than 7 months with A52S , thanks.
Mahmoudm.kamal said:
Yes dear, i had changed it since more than 7 months with A52S , thanks.
Click to expand...
Click to collapse
And, my A037W doesnt have the OEM Unlock option. Use an MTK tool to unlock it, thats how I did it
ewrecc said:
Is it possible to flash an unlocked carrier firmware in ODIN and then be able to unlock OEM? Without carrier issues or anything? I'm a little nervous to be the first to try.. and not sure where to find US unlocked carrier firmware or if location even matters... I have the SM-A025AZ (US Cricket variant).. I guess as long as Download Mode (fastboot) is still accessible I could just flash the Cricket version back to the device.. bricked my LG-E980 back in the day.. took me a few months how to get it back up and running with LG flash tool.. i just dont want to repeat that fiasco lol... so anybody got any updates on hacking this OEM (un)lock bs??? Or any idea on flashing some other variant to the device without interrupting carrier stuff??.. seems like alot just to get a damn virtual switch to turn on.. but damnit I need root access! Lol.. about to just exchange this phone for an actual rootable phone.. i disagree with charging for hotspot.. that should be illegal.. getting charged twice to use th same bs internet.. eff that.. i just want Rooooooot!!!
Click to expand...
Click to collapse
STOP TRYING TO UNLOCK A US DEVICE ITS NOT POSSIBLE
Swyen said:
And, my A037W doesnt have the OEM Unlock option. Use an MTK tool to unlock it, thats how I did it
Click to expand...
Click to collapse
Which tool did you use?
Greetings.
I recently bought an LG V60 from one of the ebay sellers which has the Dual Screen kit included. All seemed fine almost like new but the back panel has a small gap on the left side corner with a very small scuff on the AL frame near it. I want to send it to LGE for repair / diagnostic service want them to check about the battery status and overall condition. They are gonna charge $30 and Shipping is on me. They will re-flash the phone with latest Firmware as I was told by a rep in the live chat. I like this phone as It has a lot of tech which is useful like Dual Screen, 3.5mm jack, SD slot, 64Mp, Pen support, Bootloader Unlock, solid community knowledge and more.
So my questions are -
Once they Reflash the phone to latest OS, it is running Android 10 out of box (I did not even check the OS but it should be that and I did not unlock Bootloader yet) so it will be updated to Android 13. After doing that can I still unlock the bootloader and install all the nice things like Magisk + Rootchecker disabler + Downgrade the OS to 10 or 11 using LGUP and TMo official firmware ? I presume LG does not deploy ARB (Anti Rollback) from what I read in the past month but I want to check with community who is knowledgeable enough with this device.
Will that also re-lock the Carrier ? I have TMo sim only anyways but just curious if this will lock the SIM too.
Please share your experience with LGE or anything related to the subject.
Thank you very much for your time.
Ashtrix said:
Greetings.
I recently bought an LG V60 from one of the ebay sellers which has the Dual Screen kit included. All seemed fine almost like new but the back panel has a small gap on the left side corner with a very small scuff on the AL frame near it. I want to send it to LGE for repair / diagnostic service want them to check about the battery status and overall condition. They are gonna charge $30 and Shipping is on me. They will re-flash the phone with latest Firmware as I was told by a rep in the live chat. I like this phone as It has a lot of tech which is useful like Dual Screen, 3.5mm jack, SD slot, 64Mp, Pen support, Bootloader Unlock, solid community knowledge and more.
So my questions are -
Once they Reflash the phone to latest OS, it is running Android 10 out of box (I did not even check the OS but it should be that and I did not unlock Bootloader yet) so it will be updated to Android 13. After doing that can I still unlock the bootloader and install all the nice things like Magisk + Rootchecker disabler + Downgrade the OS to 10 or 11 using LGUP and TMo official firmware ? I presume LG does not deploy ARB (Anti Rollback) from what I read in the past month but I want to check with community who is knowledgeable enough with this device.
Will that also re-lock the Carrier ? I have TMo sim only anyways but just curious if this will lock the SIM too.
Please share your experience with LGE or anything related to the subject.
Thank you very much for your time.
Click to expand...
Click to collapse
I would just download the latest firmware from the link below,and do a factory refurbish with LGUP.Just make sure the bootloader is relocked is the key.Sim unlock wil remain in place,as long as they send you the same device back with the same IMEI number.I assume when you get it back,it will have A13 and you may have to downgrade it to re-root etc.You're good,just do those main things!
LG V600TM(LMV600TM) aka LG V60 - LG-Firmwares.com
LG LMV600TM download the firmware for free! Detailed installation instruction. Video review of the model and its features. User feedback and latest news.
lg-firmwares.com
Surgemanxx said:
I would just download the latest firmware from the link below,and do a factory refurbish with LGUP.Just make sure the bootloader is relocked is the key.Sim unlock wil remain in place,as long as they send you the same device back with the same IMEI number.I assume when you get it back,it will have A13 and you may have to downgrade it to re-root etc.You're good,just do those main things!
LG V600TM(LMV600TM) aka LG V60 - LG-Firmwares.com
LG LMV600TM download the firmware for free! Detailed installation instruction. Video review of the model and its features. User feedback and latest news.
lg-firmwares.com
Click to expand...
Click to collapse
Thank you very much for your reply.
Hm, so if I understand clearly. Basically I may need to downgrade the firmware to A10 and then re-root once I get back. And the SIM unlock might not be effected. That's good to hear.
As for the initial aspect you mentioned which I bolded, what do you mean by that ? Did you meant I should get the latest firmware and and just do a refurbish option from LGUP, may I please know what would that achieve because even if I flash / unlock bootloader the LG Service center will restore it to the factory settings and then perform a diagnostic, thus wiping everything on the phone perhaps they will even lock the bootloader.
Ashtrix said:
Thank you very much for your reply.
Hm, so if I understand clearly. Basically I may need to downgrade the firmware to A10 and then re-root once I get back. And the SIM unlock might not be effected. That's good to hear.
As for the initial aspect you mentioned which I bolded, what do you mean by that ? Did you meant I should get the latest firmware and and just do a refurbish option from LGUP, may I please know what would that achieve because even if I flash / unlock bootloader the LG Service center will restore it to the factory settings and then perform a diagnostic, thus wiping everything on the phone perhaps they will even lock the bootloader.
Click to expand...
Click to collapse
I mean don't send it to LG with an unlocked bootloader.They can refuse to repair it,and consider it tampering.Plus,they can still charge you a diagnostics fee as well.LG stop supporting bootloader unlocking past the v40 series for developer purposes is my point.For the firmware,it won't matter what build you refurbish it with.Once you refurb it the root is gone anyway.Just relock it,and pick the kdz of your choice and refurbish.Box it and ship it!You'll be good!
Surgemanxx said:
I mean don't send it to LG with an unlocked bootloader.They can refuse to repair it,and consider it tampering.Plus,they can still charge you a diagnostics fee as well.LG stop supporting bootloader unlocking past the v40 series for developer purposes is my point.For the firmware,it won't matter what build you refurbish it with.Once you refurb it the root is gone anyway.Just relock it,and pick the kdz of your choice and refurbish.Box it and ship it!You'll be good!
Click to expand...
Click to collapse
Understood now.
Just a small clarification from my side. The phone is not yet bootloader unlocked (it's locked right now), it's just running Android 10 stock firmware. Just SIM unlocked by the ebay seller. I did not even use the phone yet.
And once they get the device they will re-flash it to Android 13 build and then do the diagnostics. I think I should be good ? As in no need to just Refurbish because it's already running bone stock A10.
Once I get it back I will downgrade to A10 and unlock bootloader ?
Thank you again for your insight.
Ashtrix said:
Understood now.
Just a small clarification from my side. The phone is not yet bootloader unlocked (it's locked right now), it's just running Android 10 stock firmware. Just SIM unlocked by the ebay seller. I did not even use the phone yet.
And once they get the device they will re-flash it to Android 13 build and then do the diagnostics. I think I should be good ? As in no need to just Refurbish because it's already running bone stock A10.
Once I get it back I will downgrade to A10 and unlock bootloader ?
Thank you again for your insight.
Click to expand...
Click to collapse
You can go to A10,A11 or A12 once you get it back.That will be your choice from there.You can still root and unlock the bootloader with the current files that's been posted in the forums.It's stock,just factory clear it and send it on it's way.You're good!
Got it, thanks a lot.
I will send this phone to them directly as-is with the A10 and hope they can fix the issues with it.