hello,
over the last year the battery on my kenzo device has been performing poorly over time, to the point where the battery doesnt charge past 60% and that charge doesnt last more than 2 - 3 hourse of use!
also over the last year (phone was bought on october 2016) the included charger and usb cable stopped working altogether! so now im charging with an old samsung 1A wall charger and samsung usb cable.
so i finnally installed a new battery, its an official xiaomi 4000mah battery (bm46 just like the one that comes with the phone) and while battery life is much improved and standby times are much improved, the battery also doesnt charge past 70 - 75%,
could this be because of the usb wall charger and the cable?
im guessing i need a 5V - 2A charger ? could a quick charge 3.0 charger work?
also, i have a custom rom installed (aim_rom) and any oreo or nougat rom i install show the little ray on the battery icon like when its charging even when its not charging! any thoughts? thanks.
DONT USE QC 3.0 IT WILL DESTROY YOUR PHONE. Our Phone doesnt support QC 3.0
where did you buy the battery? i'm looking for a new one
Dnlz said:
where did you buy the battery? i'm looking for a new one
Click to expand...
Click to collapse
I would like to know too, thanks.
Related
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
last week i bought a Redmi 5 Plus 4gb/ 64gb Global then i tried to test charge time and quick charge.. 3-4 times with a qualcomm QC 3.0 charger and another QC 2.0 charger.. The results are similar: all about 2 hour.. the charge time with Xiaomi's own 2A Charger it take about 2 and half hour. i know its good but not so good.. By the way i notice that when test with QC3.0 charger it can not charge with 12V.. (i used a usb tester to see voltage and Current) i just saw 9.30v as max voltage. its behave look like QC2.0 not QC3.0
Snapdragon 625 should be support QC3.0 isnt it?
Are there anyone test quick charge?
I have a QC 2.0 charger,takes about 2 hour to fully charge my R5 phone... don't have tester to measure voltage,but phone doesn't heats up,its around 28 C when charging.Charger does
all my qc3.0 tests take 2 hours too. i see my qc 3.0 charger work as qc 2.0 charger. maybe my charger not work as qc 3.0 maybe our phone not support qc 3.0 we will see... i will buy a new qc 3.0 charger and i will test it again then i share the results here too.
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
rajit said:
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
Click to expand...
Click to collapse
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
redsfury said:
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
Click to expand...
Click to collapse
i agree with you
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
amedian said:
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
Click to expand...
Click to collapse
I'm planning to buy my Xiaomi Redmi 5 Plus from AliExpress. Do you advise me to do so,?
I use my Axon 7 charger which works fine.
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
I've seen mine go up to 2600 mah with a samsung quick charge adaptor, don't know waht version of QC thou, 1.5 hours to 100%.
Cheers!
Ramon S.
I'm using my old charger from vivo , is this normal charging speed?
I tried a charger that is certified by Qualcomm with QC3.0 and got around 2470 mAh (4.171 V)
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
mathefaro said:
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
Click to expand...
Click to collapse
You are not alone. R5 plus and some another xiaomi device, sometimes we see this problem. And there is no software solution. Wipe, mi flash, battery calibrationi root... I tried everything but no luck.
Only solution is;
Remove the back cover (i did it, its not so difficult.)
Remove the battery connector plug
Wait a few seconds
Plug it back.
Thats done. Problem solved.
https://www.youtube.com/watch?v=JkeP30myjF8
amedian said:
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
Click to expand...
Click to collapse
Can you please confirm whether it supports quick charge 3.0 ?
I`m about to buy a mi quick charge 3 adapter.
You can post screenshot of your file located at /sys/class/power_supply/battery/uevent
Just want to be sure. That`s it.
I know I might be late but I'm getting around 4.4v is that normal?
kemdroid said:
I know I might be late but I'm getting around 4.4v is that normal?
Click to expand...
Click to collapse
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
paulb86 said:
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
Click to expand...
Click to collapse
Actually I heard it's fine. I'm using quick charge 3.0. Redmi Note 5 AI/Global. Fully charges from 0 in 1hr 50 mins.
Was planning on using the fast charger that came with my S6 Active to keep at work. It still fast charges my S6 but when I use it with my S9 it only slow charges. I've checked the markings on the charger and they are exactly the same as on the charger that came with my S9 even down to the model number except for 1 thing. One says made in China and the other says made in Vietnam.
The fact that the old one still fast charges my S6 to me rules out the charger being faulty. Has anyone else experienced anything like this?
Ive been experiencing the same problem with my Mi power bank 2i.
When i connect it to S9 plus ots gives Fast charging message and then turns to cable charging.
I hope they rectify it in a patch.
This is ridiculously bad as i travel a lot and only depend on power babk 2i as it fast charges all samsung phones.
Any1 else having same problem ?
The charger that came with my S7 fast charges the S9+ without any issue, as does the 3rd party car charger I'm using. Does the one that came with you S9 fast charge properly? Are you using the cable that came with your S9 with the old charger?
I have a ton of chargers. The one that came with my nexus 6, my ATT prime time tablet, and my LG v20 and LG v495 tablet all fast charge my 9+. They are all Qualcomm fast charge 2/3. My Anker qc3 does fast charging as well. Variety of cables, some generic, some LG.
If I think of it when I get home I'll check my power bank. It's a qc 3.0 and is a 10k mah I think. Was 20ish dollars on Amazon.
meyerweb said:
The charger that came with my S7 fast charges the S9+ without any issue, as does the 3rd party car charger I'm using. Does the one that came with you S9 fast charge properly? Are you using the cable that came with your S9 with the old charger?
Click to expand...
Click to collapse
Yep, the charger that came with my S9+ works perfectly, and yes I am using the cable that came with my S9+
I have the same issue with an ANKER charger and CHOETECH cable that was working perfectly with my S8+...
i charged the my s9+ after draining it completely without powering it ON.
Charged in 100mins.
The progress was like 15 mins -24%,45 mins - 60%, 80 mins - 90%, this is the first time i was able to charge it quickly.
I was very disappointed with charging time but this is third cycle, so i am sure its learning the way we use.
I charged it with QC3.0 charger
I will be posting more about this.
I think I have a Fast Charge problem with my AT&T branded S9+. Fast charging displays when I use the included cable and wall adapter and even if I use the included wall adapter and any of These Aukey Cables. But if I use those cables or even the cable included with the phone with This Aukey QC 3.0 Car Charger or This Anker QC 3.0 Power Bank I cannot get Fast Charging to display. Yes Fast Charging is enabled in Battery --> advanced. It worked for the first couple days with all combinations but now its as described. Even did a factory reset last night and restored from my previous phone's Google Backup which I did not do the first time (used Smart Switch the initial startup on launch day and only moved a few things over) Should I swap the phone out for another?
Im getting the same issue when using Aukey power bank. It does not fast charge my S9+. Works perfectly on S7 and S8. Do you guys have any luck?
Any resolutions for this? Same is happening to me. Is there a particular brand of cable that might help?
bartio1975 said:
Any resolutions for this? Same is happening to me. Is there a particular brand of cable that might help?
Click to expand...
Click to collapse
Most of my cables are Choetech brand from Amazon. Every single QC 2.0 charger fast charges my s9+
Just throwing this out there to rule it out, you can enable/disable wireless charging in the Advanced Features, Accessories section, check it's on.
Same here? Is this a bug introduced by a firmware update? Why aren't enough ppl talking about it
Hello guys, So I bought an almost new Honor View 10 from someone and they gave me the phone with a Samsung Adaptive Fast Charger and not the Huawei one. It works when I plug it except I noticed 2 things:
1) The phone stops charging few seconds after I log into the phone and start using it.
2) Battery duration was fantastic at first, said 2 days x hours left at 100% charge, now it says about 1 day x hours left.
The output on the charger is 9V 1.67A or 5V 2A. I have charged the phone about 4 or 5 times since getting it. So what do you guys think ? Is this charger ok and I should keep using it( i.e It wont ruin my battery) or should I spend some money and buy a Huawei one?
Thanks !
I rather prefer the original one, to prevent thigs like is happening to you
I don't think Super Charge will work with the Samsung charger.
Samsung's Adaptive Charger won't work as quick charge on view10, it will only charge the phone at the rate of 5v 2a.
I am posting here for first time. This issue was present when I got this device then one day I flashed ancient os rom and elinder kernel . Surprisingly my device started charging fast full in about 2 hours. After that I changed the rom to colt os 6.0 without elinder kernel. Same full charge in 2 hours . After few random reboots and about a weeks usage I decide to install evolution X for which I took the usb out of the charger and put it in my laptop to transfer the file. After flashing I put it back in the charger and checked charging current it was around 300-400ma about 4% charge in 10 mins. I restored my backup but no avail. Then I flashed havoc os 3.5 I get 4%/10 mins but after I install ancient os I get around 32%/ hour . If please anyone would help me it would mean a lot thanks . And I really hate 4 hours charging time.
I'm aslo stucked:highfive:
Try charging with original charger and USB cable, if you are already charging with original one try with different USB and charger.
See if there is any lint or dust in charging port or USB cable that may also slow downs the charging.
Try flashing elinder kernel again.
Clean flash again (do backup everything)
And lastly it might be related to battery since device is already 4 years old(not sure about your device's age). lithium ion battery does degrade over time so that might be causing slow charging.
sometime i do also get slow charging but thats related to USB cable in my case, i need to adjust USB in specific direction to charge fast. but weird thing is i use same USB and charger in other devices and it charges with good speed without any USB adjustments.
Fix
If any one is wondering if i fixed the issue yes i did seems that if i use a 9v 1.5a charger the phone charges to 90% in 1 hour 40 min on ancient os 3.5. using any other charger delivers only about 800ma and my phone charges in 3 hours. I have also tried samsung a71 28 watt charger but the phones does not charge even 1% in 5 minutes using that charger.
LoadOP2 said:
If any one is wondering if i fixed the issue yes i did seems that if i use a 9v 1.5a charger the phone charges to 90% in 1 hour 40 min on ancient os 3.5. using any other charger delivers only about 800ma and my phone charges in 3 hours. I have also tried samsung a71 28 watt charger but the phones does not charge even 1% in 5 minutes using that charger.
Click to expand...
Click to collapse
Kenzo is strictly made for 5V 2A charging. If u keep on using high volt charger then u will blow diode on charging board and will stop charging.
Can I charge Xiaomi Note 10 Lite with a standard Samsung charger? Following are the specifications of chargers
Xiaomi Note 10 Lite came with 30w Fast Charger, following is whats written on the charger:
Output 5.0V=3.0A 15.0W/9.0V=3.0A 27.0W/12.0V=2.25A 27.0W/20.0V=1.35A 27.0W/10.0V=3.0A Max 30.0W Max
I want to use the following Samsung charger:
Output 5.0V=1.55A
I don't need fast charging and I am planning on keeping this phone for a longer period of time thus want to use a standard charger to save the battery.
Kindly if anyone has technical knowledge about these readings please advise me whether I can use the above standard charger without damaging the battery if not what standard charger should I buy for my phone?
Update: I have been charging 'Mi Note 10 lite' with Samsung Standard Charger (1.55A 5V) but the charger is getting too... hot, not sure whether its affecting battery life (battery is not getting hot) though.
NexusAd said:
Can I charge Xiaomi Note 10 Lite with a standard Samsung charger? Following are the specifications of chargers
Xiaomi Note 10 Lite came with 30w Fast Charger, following is whats written on the charger:
Output 5.0V=3.0A 15.0W/9.0V=3.0A 27.0W/12.0V=2.25A 27.0W/20.0V=1.35A 27.0W/10.0V=3.0A Max 30.0W Max
I want to use the following Samsung charger:
Output 5.0V=1.55A
I don't need fast charging and I am planning on keeping this phone for a longer period of time thus want to use a standard charger to save the battery.
Kindly if anyone has technical knowledge about these readings please advise me whether I can use the above standard charger without damaging the battery if not what standard charger should I buy for my phone?
Click to expand...
Click to collapse
Yes you can use any charger.
1.55A Charger gets hot because mi note 10 lite can support up to 30w so it get all the "juice" of this weak charger..
Technicaly the battery life will be even better with slower chargings.. but xiaomi batteries are very good in my experience and everything official (like 30w charging) will not harm the battery.
Im phone technician btw.
ParaSense. said:
Yes you can use any charger.
1.55A Charger gets hot because mi note 10 lite can support up to 30w so it get all the "juice" of this weak charger..
Technicaly the battery life will be even better with slower chargings.. but xiaomi batteries are very good in my experience and everything official (like 30w charging) will not harm the battery.
Im phone technician btw.
Click to expand...
Click to collapse
Thank you.
- Are you sure this charger getting very hot is not of any concern and will not hurt the note 10 lite battery?
- Also is this dangerous for the charger? It doesn't get hot with the Samsung pone it came up with?
- I am worried because in the past one of my laptop's battery bloated because I used a charger with 19V instead of 19.5V. it shouldn't hurt the battery by some experts but I guess it did in my case probably because battery was inside laptop all the time while I was using AC power, although laptop had a feature to disconnect battery when fully charged but in my case battery still got bloated.
NexusAd said:
Thank you.
- Are you sure this charger getting very hot is not of any concern and will not hurt the note 10 lite battery?
- Also is this dangerous for the charger? It doesn't get hot with the Samsung pone it came up with?
- I am worried because in the past one of my laptop's battery bloated because I used a charger with 19V instead of 19.5V. it shouldn't hurt the battery by some experts but I guess it did in my case probably because battery was inside laptop all the time while I was using AC power, although laptop had a feature to disconnect battery when fully charged but in my case battery still got bloated.
Click to expand...
Click to collapse
volts matter.. you can damage a device and its battery with more volts than it supports.. about amps , the device will get as much as it can.. for example if u plug a 5volt10 amp on mi note 10 lite it will get 5 volt and 3 amps, and the charger will not get hot
mi note 10 lite can handle from 5 to 20 volt.
The only concern is about the charger because it give all the power it have.. but i dont think samsung charger will blow up they got all protections.. your phone gets as much as the charger can give (5v 1.55amp) but i suggest you buy a stronger charger so it can charge cooler
ParaSense. said:
volts matter.. you can damage a device and its battery with more volts than it supports.. about amps , the device will get as much as it can.. for example if u plug a 5volt10 amp on mi note 10 lite it will get 5 volt and 3 amps, and the charger will not get hot
mi note 10 lite can handle from 5 to 20 volt.
The only concern is about the charger because it give all the power it have.. but i dont think samsung charger will blow up they got all protections.. your phone gets as much as the charger can give (5v 1.55amp) but i suggest you buy a stronger charger so it can charge cooler
Click to expand...
Click to collapse
Thank you. Btw I was using less volts charger 19V while laptop required 19.5V, I was told slightly less volts don't matter but boom a year later we find a pregnant battery.
NexusAd said:
Thank you. Btw I was using less volts charger 19V while laptop required 19.5V, I was told slightly less volts don't matter but boom a year later we find a pregnant battery.
Click to expand...
Click to collapse
Less volts can't harm.. Laptop batteries are fragile and they die after 2-3 years.. To live longer you have to remove it from laptop when you are not using it (the battery if charger is plugged)
+1 TO ABOVE, won't be issues. Worst case scenario charger may die, not the phone battery.