Hey, guys.
Follow the .bat file to flash the stock firmware of the Moto G6/G6 Plus.
Instructions:
Place the Flash ROM. bat file inside the ROM folder and normally run the file and you are done.
http://www.mediafire.com/file/bighge2uxb7x3po/Flash_ROM.bat
luiz_neto said:
Hey, guys.
Follow the .bat file to flash the stock firmware of the Moto G6/G6 Plus.
Instructions:
Place the Flash ROM. bat file inside the ROM folder and normally run the file and you are done
Click to expand...
Click to collapse
Your file has an error and does not have all the commands you need.
https://forum.xda-developers.com/showpost.php?p=77161193&postcount=89
Here you have the correct flash.bat with the original commands extracted from the system installer file:
https://forum.xda-developers.com/showpost.php?p=77436743&postcount=132
Related
Hello,
I can't flash zips file in fastboot mode, can somebody help?
when i type:
fastboot flash zip filename.zip i have:
...
remote: partition zip not found
...
why this happen? i'm rooted, bootloader unlocked - stock ics rom
lahcim13 said:
...
remote: partition zip not found
Click to expand...
Click to collapse
This is because you're commanding it to flash it on the zip partition, which does Not exist. Like for kernel you type Fastboot flash Boot xxxxx where the kernel is flashed to the boot partition. The command you're using is wrong. What does the zip contain?
Tapatalked !
Rapier07 said:
This is because you're commanding it to flash it on the zip partition, which does Not exist. Like for kernel you type Fastboot flash Boot xxxxx where the kernel is flashed to the boot partition. The command you're using is wrong. What does the zip contain?
Tapatalked !
Click to expand...
Click to collapse
the zip file is: boot+touch.cwm_for_6.1.1.B.1.10.zip
from this thread:
http://forum.xda-developers.com/showthread.php?t=1922029
lahcim13 said:
the zip file is: boot+touch.cwm_for_6.1.1.B.1.10.zip
from this thread:
http://forum.xda-developers.com/showthread.php?t=1922029
Click to expand...
Click to collapse
you cant flash zip file on fastboot.. extract the zip file first. you will get file 'boot.img'. place this file in the fastboot folder, then run command:
fastboot flash boot boot.img
anyway there is v2 cwm file.. download that..
Please post in appropriate section.
Moved to Q&A
Sent from my Nocturnalized One XL using Forum Runner
While attempting to install B330 on my Honor 7 I ended up without any OS whatsoever. I do have Recovyer Installed but I can't find a .rar stock room to flash from scratch. All of them need you to go to "Software Upgrade" which I can't reach as it is launching into Recovery.
I'm unsure which B Version I had, I remember being on 5.0.2
All the firmware files are here.
Download your model's firmware and do the following steps:
Extract UPDATE.APP from the zip.
Extract system.img, boot.img, cust.img, recovery.img from UPDATE.APP via Huawei Update Extractor tool.
Flash those files by booting into bootloader mode, and executing commands like:
Code:
fastboot flash system system.img
and so on.
Once the system boots up do the three button update by putting that very UPDATE.APP from which the files were extracted.
I need help my phone is rooted and I want updated it but phone can't updated
What's method for update it
Thanks
Akram ghanam said:
I need help my phone is rooted and I want updated it but phone can't updated
What's method for update it
Thanks
Click to expand...
Click to collapse
Flash stock recovery or visit Honor 5X File Depot and and install b310 software. And update it.
HUAWEI KII-L21 Sent with Tapatalk.
Can you give me the link to download it
Thanks again
Akram ghanam said:
Can you give me the link to download it
Thanks again
Click to expand...
Click to collapse
Here C185 b310 version. Use Huawei update extractor And select update.app from the zip you downloaded and extract recovery, system, boot files with huawei extractor and flash with adb. Install Mfastboot first.
Follow the steps:
Steps:
Use Huawei Update Extractor to open the stock rom (update.app file from downloaded stock rom zip) with profile unkown.
Select BOOT.img, RECOVERY.img, SYSTEM.img and extract them using right-click Extract selected
put .img files in the folder as minimalfastboot.
boot device in fastboot mode: VOLUME DOWN + POWER: and on Pc's commandline navigate to fastboot
Flash Recovery: fastboot flash recovery RECOVERY.img
Flash Boot: fastboot flash boot BOOT.img
Flash System: fastboot flash system SYSTEM.img
Reboot. Finished, And share the result
can you send me a video on how to do it? please instructions are too hard
Hellow guyz I am new here
I got my phone bricked yesterday without any reason .. the phone was fine until i make a restart and It was bricked !!
It stucks at the boot at the frist (SAMSUNG GALAXY S4 GT-I9515) and at the top left corner (recovery booting ....) in blue text
My phone was rooted and installed TWRP and Custom rom Lineage OS 14 Nougat 7.1
I Can't access recovery ... Just the Downloading Mode..
Tried to flash stock rom from sammobile by odin and Twrp recovery and Still the same
and tried Re-partition and Nand Erase All using a PIT file
Kies not supporting my Model For Emergency Frimware Upgrade
Please Help ..!!
Did you tried with German DBT version and 4 files firmware ?
Teddy Lo said:
Did you tried with German DBT version and 4 files firmware ?
Click to expand...
Click to collapse
Thanks Teddy for Reply
No I didn't ... What is the purpose and how to do it ?
Download from here :
http://www.mediafire.com/file/aqvsq94vj9562tm/I9515XXU1ANK2_YXY1ANL2_Repair_Firmware_4Files.rar
password if they need : www.gem-flash.com
Once you extracted flash 4 files in odin :
here is example:
https://www.youtube.com/watch?v=vjUoxCYfEGo
And if you want to have twrp recovery you can use this one and flash with odin like click on AP and then choose this file :
https://androidfilehost.com/?fid=95916177934544765
Good luck
Teddy Lo said:
Download from here :
http://www.mediafire.com/file/aqvsq94vj9562tm/I9515XXU1ANK2_YXY1ANL2_Repair_Firmware_4Files.rar
password if they need : www.gem-flash.com
Once you extracted flash 4 files in odin :
here is example:
https://www.youtube.com/watch?v=vjUoxCYfEGo
And if you want to have twrp recovery you can use this one and flash with odin like click on AP and then choose this file :
https://androidfilehost.com/?fid=95916177934544765
Good luck
Click to expand...
Click to collapse
You are Awesome Man thanks Very Much
I will try it
Teddy Lo said:
Download from here :
http://www.mediafire.com/file/aqvsq94vj9562tm/I9515XXU1ANK2_YXY1ANL2_Repair_Firmware_4Files.rar
password if they need : www.gem-flash.com
Once you extracted flash 4 files in odin :
here is example:
https://www.youtube.com/watch?v=vjUoxCYfEGo
And if you want to have twrp recovery you can use this one and flash with odin like click on AP and then choose this file :
https://androidfilehost.com/?fid=95916177934544765
Good luck
Click to expand...
Click to collapse
Unfortunately .. It didn't work .. still having the same problem and still can't access to the Recovery
Hi , try this :
1. Download Heimdall Suite from link below , once you download extract that file in C:/ or D:/ partiton and install drivers from Driver folder
https://glassechidna.com.au/heimdall/
2.Download CF-Root file from link below , once you download extract two files recovery.img and cache.img.ext4 inside Heimdall extracted folder for example C://Heimdall Suite/ .
https://download.chainfire.eu/611/CF-Root/CF-Auto-Root/CF-Auto-Root-jfvelte-jfveltexx-gti9515.zip
3.Now make sure your phone is in Download mode , run Command Prompt as Administrator and navigate to Heimdall Suite located folder by default it will be C://Users/YourUserName/ you will change location by writing cd .. && cd C:/Heimdall Suite.
4.Now plug your device in PC with USB and write this command:
heimdall flash --RECOVERY recovery.img --CACHE cache.img.ext4
Now wait when is flashing finished and once is finished try to enter into recovery mode if you are not able to do that , use the same metod to flash twrp recovery which I send you before .
If you are able to go to recovery try then to flash latest stock firmware for your region .
Good Luck
Teddy Lo said:
Hi , try this :
1. Download Heimdall Suite from link below , once you download extract that file in C:/ or D:/ partiton and install drivers from Driver folder
https://glassechidna.com.au/heimdall/
2.Download CF-Root file from link below , once you download extract two files recovery.img and cache.img.ext4 inside Heimdall extracted folder for example C://Heimdall Suite/ .
https://download.chainfire.eu/611/CF-Root/CF-Auto-Root/CF-Auto-Root-jfvelte-jfveltexx-gti9515.zip
3.Now make sure your phone is in Download mode , run Command Prompt as Administrator and navigate to Heimdall Suite located folder by default it will be C://Users/YourUserName/ you will change location by writing cd .. && cd C:/Heimdall Suite.
4.Now plug your device in PC with USB and write this command:
heimdall flash --RECOVERY recovery.img --CACHE cache.img.ext4
Now wait when is flashing finished and once is finished try to enter into recovery mode if you are not able to do that , use the same metod to flash twrp recovery which I send you before .
If you are able to go to recovery try then to flash latest stock firmware for your region .
Good Luck
Click to expand...
Click to collapse
Thanks again man .. as I said before you are Awesome xD
I will give it a try
Teddy Lo said:
Hi , try this :
1. Download Heimdall Suite from link below , once you download extract that file in C:/ or D:/ partiton and install drivers from Driver folder
https://glassechidna.com.au/heimdall/
2.Download CF-Root file from link below , once you download extract two files recovery.img and cache.img.ext4 inside Heimdall extracted folder for example C://Heimdall Suite/ .
https://download.chainfire.eu/611/CF-Root/CF-Auto-Root/CF-Auto-Root-jfvelte-jfveltexx-gti9515.zip
3.Now make sure your phone is in Download mode , run Command Prompt as Administrator and navigate to Heimdall Suite located folder by default it will be C://Users/YourUserName/ you will change location by writing cd .. && cd C:/Heimdall Suite.
4.Now plug your device in PC with USB and write this command:
heimdall flash --RECOVERY recovery.img --CACHE cache.img.ext4
Now wait when is flashing finished and once is finished try to enter into recovery mode if you are not able to do that , use the same metod to flash twrp recovery which I send you before .
If you are able to go to recovery try then to flash latest stock firmware for your region .
Good Luck
Click to expand...
Click to collapse
That didn't Work too
Hm, very strange , but you can try also this :
1. Download stock firmware for your region :
https://updato.com/firmware-archive-select-model?exact=1&q=GT-I9515
2.Then unzip the firmware archive with winrar or 7-zip
3, Now open archive and extract just recovery.img on Desktop and now create recovery.tar.md5 file from recovery.img For Odin.
here you have tar script download link:
https://forum.xda-developers.com/showthread.php?t=2446269
Once you download archive file extract to Desktop and now move your recovery.img inside that folder and now move recovery.img to ImgToTar.MD5 now PopUp will come , wait little bit and now you will have recovery.tar.md5 now Open odin , click on AP and add that recovery.tar.md5 make sure your phone is in Download mode and start flash once is finished look if you are able now to enter into recovery mode , wipe cache partition and if you have bootloop flash now the same full firmware .
That some user tried on Note 4 , from androidcentral hope it will work for you also
Good Luck
Teddy Lo said:
Hm, very strange , but you can try also this :
1. Download stock firmware for your region :
https://updato.com/firmware-archive-select-model?exact=1&q=GT-I9515
2.Then unzip the firmware archive with winrar or 7-zip
3, Now open archive and extract just recovery.img on Desktop and now create recovery.tar.md5 file from recovery.img For Odin.
here you have tar script download link:
https://forum.xda-developers.com/showthread.php?t=2446269
Once you download archive file extract to Desktop and now move your recovery.img inside that folder and now move recovery.img to ImgToTar.MD5 now PopUp will come , wait little bit and now you will have recovery.tar.md5 now Open odin , click on AP and add that recovery.tar.md5 make sure your phone is in Download mode and start flash once is finished look if you are able now to enter into recovery mode , wipe cache partition and if you have bootloop flash now the same full firmware .
That some user tried on Note 4 , from androidcentral hope it will work for you also
Good Luck
Click to expand...
Click to collapse
That didn't Work too It Seems that I lost my device forever .... May be It's a Hardware Failure
any one can help me ?!!
no hekp ?
i'm in the same situation
I own Motorola One Action running Android 10 and bootloader unlocked and unrooted. I would like to root this phone so I tried to install TRWP. However, I found TRWP doesn't support Android 10. So I installed Magisk Manager and tried to install Magisk but got an error massage saying "- Unpacking boot image, Unsupported/Unknown image format Installation failed".
Would you please help me what to do?
Thank you very much.
[email protected] said:
I own Motorola One Action running Android 10 and bootloader unlocked and unrooted. I would like to root this phone so I tried to install TRWP. However, I found TRWP doesn't support Android 10. So I installed Magisk Manager and tried to install Magisk but got an error massage saying "- Unpacking boot image, Unsupported/Unknown image format Installation failed".
Would you please help me what to do?
Thank you very much.
Click to expand...
Click to collapse
Download your stock formate, extract the payload.bin with a payload bin extractor. Find the stock boot img. Copy to root of phone storage.
Open magisk manager select install on magisk. Pick patch image make sure the top 2 check boxes are checked on main screen before doing this. After magisk will say the patched image is in download folder on your phone. Copy the patched image to your PC. Open your command prompt in your fastboot tools folder put the patched image in it.
Reboot your phone to bootloader or fastboot mode. In your command prompt type fastboot flash boot (name of patched img).img
Reboot phone.
Before doing this make sure bootloader is unlocked and USB debugging is active
toolhas4degrees said:
Download your stock formate, extract the payload.bin with a payload bin extractor. Find the stock boot img. Copy to root of phone storage.
Open magisk manager select install on magisk. Pick patch image make sure the top 2 check boxes are checked on main screen before doing this. After magisk will say the patched image is in download folder on your phone. Copy the patched image to your PC. Open your command prompt in your fastboot tools folder put the patched image in it.
Reboot your phone to bootloader or fastboot mode. In your command prompt type fastboot flash boot (name of patched img).img
Reboot phone.
Before doing this make sure bootloader is unlocked and USB debugging is active
Click to expand...
Click to collapse
Thank you very much for your reply. However, I am still the beginner for Android and would like to have more explanation concerning the first sentence. I would like to know (1) how can I download my stock formate and where, (2) How can I extract the payload.bin. Thank you for your help.
[email protected] said:
Thank you very much for your reply. However, I am still the beginner for Android and would like to have more explanation concerning the first sentence. I would like to know (1) how can I download my stock formate and where, (2) How can I extract the payload.bin. Thank you for your help.
Click to expand...
Click to collapse
Sorry typo. Was supposed to be firmware. And on Android 10 inside the firmware zip. There is a payload.bin file. Search Google for a payload.bin dumper don't know what is you are on ex Linux mac or PC.
https://www.androidinfotech.com/motorola-one-action-android-10-stock/