I did already unlocked bootloader and flashed twrp then i tried to install gapps and something went wrong.
Now when i start my phone it just says "google" like two second and then goes to erecovery.
I have no idead what i should do.
Is my phone completely dead?
Nop.
I'm guessing your are with a chinese honor 9 on a chinese firmware, which one ?
Im from finland so i should have eu firmware right?
Lare332 said:
Im from finland so i should have eu firmware right?
Click to expand...
Click to collapse
Depending where and whoyou buy it from you could have a not european version rebranded or not to european version.
You're stating : 'then i tried to install gapps' : There was no google playstore already on your phone ?
I also rooted my phone with magisk so the stock play store didint work so i tried to install gapps.
And i bought my phone local shop in finland
Lare332 said:
I also rooted my phone with magisk so the stock play store didint[ worked/QUOTE]You had to use magiskhide on playsore app.
So we're guessing you were on firmware STF-L09C432B36x.
Just use HuRUpdater to flash one of those.
Click to expand...
Click to collapse
I cant find the correct files and also dont understand how the updater works.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279/ i dont understand these instructions.
It says "Put files you want to flash in a seperate folder on sdcard." does it mean microsdcard or what?
Yes it does.
(Alternatively, you could replace your microSD by a USB flash drive plugged in phone's USB).
So there is no way to flash them without microsdcard? Am i right
So i think i found the right files but witch one should i use STF-L09Shw or STF-L09hw what the difference is?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lare332 said:
So there is no way to flash them without microsdcard? Am i right
Click to expand...
Click to collapse
You're wrong, you could replave microSD by a USB flash drive plugged in phone's USB
Lare332 said:
So i think i found the right files but witch one should i use STF-L09Shw or STF-L09hw what the difference is?
Click to expand...
Click to collapse
STF-L09S is the 'unreleased' honor 9 premium with 6GB Ram.
I tried to flash the firmware via huru updater but it didint work i just get and error message that something went wrong
It didint work.
I tried to flash the firmware via huru updater but i just get error message that say something went wrong.
Without your twrp's recovery.log it will hard to know what happened... please share it.
My crystal ball's powers are sometimes kind of limited, but I'll try asking :
-Did you try with a FullOTA-MF firmware ? which one ?
-Did you renamed 2 of the 3 firmware's files like asked ?
-Did you used twrp 0.3 ?
-Did you used HuRUpdater 0.3 ?
Yeah i did all those thing but i managed to get my phone up and runing by using files from this thread https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Thank you for you time, i appreciate your help.
Oh, so you were still on nougat STF-L09C432B1xx.
Yeah. I just want this thing to run atleast for now.
Related
Hello,
First of all i hope I'm in the right category, sorry If I'm wrong.
So, i have a question about this tablet. It has a really low internal storage that it uses (2GB) and on the other hand it has phone storage total space of (29.68GB). It's a MTK6582 from AliExpress (China) and the MTK Droid Tools says that: "MT6572 (MT6582 is Fake!)". So my question is can any partitioning be done to improve the size of internal memory or it's just simply fake? I'll attach some screenshots with this tablets information.
Thank you for reading and i hope you can help me out.
Thanks!
https://ibb.co/qJH9qCS
https://ibb.co/xq0JwD6
https://ibb.co/fYrDQdT
https://ibb.co/LrZMZs0
https://ibb.co/gVKwcPH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone?
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Milos00 said:
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Click to expand...
Click to collapse
Try to flash original firmware again
amirizad_7436 said:
Try to flash original firmware again
Click to expand...
Click to collapse
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Milos00 said:
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Click to expand...
Click to collapse
No I don't mean backup
Download orginal firmware and flash it
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Milos00 said:
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Click to expand...
Click to collapse
I really don't understand sorry
But you should use the latest one
amirizad_7436 said:
I really don't understand sorry
But you should use the latest one
Click to expand...
Click to collapse
On the motherboard of the tablet that i have it says: D101_MB_V4.0 2014-09-26 but the one that i linked is for the version 3.0, should i try to do it or maybe use something else like this https://www.needrom.com/download/n9106d101-mtk6572-10-inch/ ?
I'm looking for help finding the link for D101_MB_V4.0 2014-09-26 or confirmation if the one of those two that i linked would work?
This one says in description it can be used for both D101 V2.0 & V4.0 but I'm not sure. https://www.needrom.com/download/n9106d101-mtk6572-10-inch/
Hello people,
i hope the model is on the right thread.
Im Daniele from italy. I have this box and is stuck on logo android. I try to reset it or change the power supply. But not fix.
I read something about to flash the firmware (two methods) can you explain me and give me the right FW?
here you can see the picture of mainboard.
https://photos.app.goo.gl/R2V2zKzBdcQiHq6u6
https://photos.app.goo.gl/7Z69DR6dfbxZt4oR8
Yiu can try my custom android TV 9.0 Rom for s905w devices, based on official mi box firmware so is fast and stable l https://aidansrom.wordpress.com
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Benz83 said:
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Click to expand...
Click to collapse
there is no 100% Sure Way to know if its deffinatley compatible, with amlogic chips (like the s905w) can usally install each others firmware as long as the Chip matches (s905w roms on s905w chips) they will usally all boot up but things like wifi, bluetooth & IR Remote may not work so then its would be a case of try another rom, I have 4 versions for s905w with diffrent wifi & remote configurations so it's a case of try them and see what works for you, and i will still be releasing updates with more wifi chips ect soon, if you work with me no doubt we can get thing up and running well for you
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Benz83 said:
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Click to expand...
Click to collapse
Good Luck
V4 Uploading Now As Well With NTFS USB HDD/Stick Fix if this is something important to you & Also V3 will now say there is an update available, You Will Have To Download my v4 Manually To Update (Baisically its trying to install the Official Mi Box S Update But Because We Are Not Running On Official Mi Box Hardware The Update Will Fail) Once I Know a New Version For The Mi Box is Released I Can Download It From My Device And Modify it To Run On Our Devices, i Aim To Update To The Latest Mi Box Firmware Within a Week Of The Update Being available For Official Mi Box Devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Benz83 said:
View attachment 5159317
Click to expand...
Click to collapse
V4 Uploaded, There Are 4 Versions to try
https://drive.google.com/drive/folders/13k5wx9zqHRV_7R5kfwHcLxPdb1cYMC1U?usp=sharing
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
It happened to me when flashing tanix tx9s.
I think the tool checks the img file and determines whether to use the latest or an older version.
The flashing went fine for me.
Benz83 said:
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
Click to expand...
Click to collapse
Try these Stock Roms
https://drive.google.com/file/d/1Q3vsCniqs-Aq7fiFz8LQ3aBbyYdIOsm4/view
https://drive.google.com/file/d/1fea3eqLRzG42ydB1DC9DjlbgDKnBISW1/view
thanks a lot, but nothing to do. Other solution?
A method to reset nand flash? i saw something about pinout
Captured the OTA today, just a security update.
download link: https://g2slave-us-east-01.tclcom.com/b173797e241a69aa94a93d7213e38be5a0db9f0a/98/609598
Code:
ota-property-files=metadata:69:415
ota-required-cache=135884800
ota-type=BLOCK
post-build=T-Mobile/T790W/Seattle_5G:10/QKQ1.200913.002/v6B92-0:user/release-keys
post-build-incremental=v6B92-0
post-sdk-level=29
post-security-patch-level=2021-02-05
post-timestamp=1612250283
pre-build=T-Mobile/T790W/Seattle_5G:10/QKQ1.200913.002/v6B8U-0:user/release-keys
pre-build-incremental=v6B8U-0
pre-device=Seattle_5G
Well i installed magisk just to root the recovery.img that was included in your zip file .. now the question is how to flash it. Im on the verzion varient t790s
ᐯerified Developer said:
Well i installed magisk just to root the recovery.img that was included in your zip file .. now the question is how to flash it. Im on the verzion varient t790s
Click to expand...
Click to collapse
Without the bootloader unlock, I dont think there is a way. Each day looks like less and less of this phone getting custom support. Going to use it for couple years and bounce to a new phone.
Well i can get the phone into EDL mode or download mode. And fastbootd just domt kno what commands and domt have a firehose but apparently you can flash without firehose im edl not sure how tho
ᐯerified Developer said:
Well i can get the phone into EDL mode or download mode. And fastbootd just domt kno what commands and domt have a firehose but apparently you can flash without firehose im edl not sure how tho
Click to expand...
Click to collapse
This might be helpful to you. https://github.com/openpst/sahara
Received android 11 OTA today for the T-Mobile Revvl 5G variant:
Code:
ota-property-files=metadata:69:296
ota-required-cache=0
ota-type=BLOCK
post-build=T-Mobile/T790W/Seattle_5G:11/RKQ1.210209.002/v7D5H-0:user/release-keys
post-build-incremental=v7D5H-0
post-sdk-level=30
post-security-patch-level=2021-05-05
post-timestamp=1622059932
pre-device=Seattle_5G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm trying to root my T790W T-Mobile revvl 5g. I uploaded this photo thought maybe it might help
jonjon707 said:
I'm trying to root my T790W T-Mobile revvl 5g. I uploaded this photo thought maybe it might help
Click to expand...
Click to collapse
The option does not do anything toward unlocking the bootloader unfortunately.
trying to root with magisk always get the "something went wrong. app not installed" message try about 10 different methods of fixing this error only thing that work was a complete data wipe and factory reset it installed but as soon as i open it it closes immediately. is it possible to do this even? been racking my mind with this for a week now. please help
Zmuurda said:
trying to root with magisk always get the "something went wrong. app not installed" message try about 10 different methods of fixing this error only thing that work was a complete data wipe and factory reset it installed but as soon as i open it it closes immediately. is it possible to do this even? been racking my mind with this for a week now. please help
Click to expand...
Click to collapse
also if you know of another way i'm open to that as well
Has anyone had any luck rooting this phone yet?
Stuck on android 10? I have the T790w (revvl 5g)
I go to settings and update software buut it keeps showing I am up to date?
Do I need an active t-mob Sim to update? Or is there a way to manually update os.
Is there a android11/12 firmware I can download and update via recovery?
Thanks
Hi,
I have a big problem.
My brother tried to root my Xtrons Px6 rk3399 gs. with Su user. He updated superuser. Now the radio is in the boot loop and it won't start. He then tried a new firmware to bottles which does not work either, the radio only shows the logo. I get into recovery. I just do not know how to go on:-(
it's the Xtrons PQ80UNV
Sorry for my english.
Greez
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TF? Why would you want to root that?
Did you try factory resetting?
He said it would be better. then you have more options. Because of some sound patch, I don't know much about it. Factory reset? I pressed Restet button but no change. It doesn't just start the boot logo from Vw.
I don't even get to the Adroid. Only in recovery.
Did a wipe, but it still doesn't start.
You chose wipe cache partition. I meant "Wipe data/factory reset"
Try choosing it.
If your brother is the one who did this as you say, if it's me I'd force him to fix it or at least pay for it.
I tried that too. I also tried the original firmware here, but always the same.
Yandex
Finds everything
yadi.sk
Yes, that's right, he's currently doing assembly work. I'm really desperate :-(
What I noticed is that with every firmware I install it is always the same recovery version.
voxdie said:
What I noticed is that with every firmware I install it is always the same recovery version.
Click to expand...
Click to collapse
Can I ask how did you root it?
Unfortunately, I don't know. I only know that an rk3399 mcu was previously a gs version
voxdie said:
Unfortunately, I don't know. I only know that an rk3399 mcu was previously a gs version
Click to expand...
Click to collapse
I don't believe you can root a device and suddenly you forget about it...
Do you have unlocked bootloader? You may need to flash the stock ROM if you can find it.
It works again, I have now flashed the img instead of the ota. Now it works again. Great. Thank you so much for your help
voxdie said:
It works again, I have now flashed the img instead of the ota. Now it works again. Great. Thank you so much for your help
Click to expand...
Click to collapse
I don't think I did anything but happy to see everything work out fine.
Make sure your brother doesn't do something like that again.
NO, he can't get to this radio anymore .. thanks again
the UNIT you have, looks almost the same as ICE/HU/PBX89UNV ( except mine has android 9 ) XTRONS ? 64GB -4GB ?
correction- there are multiple versions of this exact same unit. (even one with a qualcomn)
yours has the HDMI out pigtail ?
firmware link -
word instruction -
codes to ENABLE DEVELOPER OPTIONS
To start debugging, enter adbon in the factory settings input password box
if you want to change the factory settings, boot image, etc,, enter 126 in the factory settings input password box.
may i ask fellow members , to root this ,
unlock boot-loader,
flash updated BOOT.img (magisk patched)
-- because this is android 9, do i need a BLANK VBMETA flash?
funny fact--- this unit, will BOOTLOOP if you put a 512GB micro SD card in the slot, it boot loop cycles..
(anything above 128GB causes issues )
the micro SD slot for MAP/GPS , --- can we use this for anything else ?
and does anyone know of there are any custom roms and or TWRP already built for this > (this should share similar/same across a few brands ?)
The device is a Moto G7 Plus with a freshly unlocked bootloader and running on off of a "fastboot boot twrp-3.6.0_9-0-lake.img" which appears to be the latest from twrp.me
See screenshot image and recovery.log attached
Any help would be greatly appreciated as I've not been able to come up with a solution.
Thank you!
Samson
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could it be an issue with the new twrp build? Have you tried booting and flashing the older 3.5.2 version?
Teo S. said:
Could it be an issue with the new twrp build? Have you tried booting and flashing the older 3.5.2 version?
Click to expand...
Click to collapse
Hey Teo, oddly enough, TWRP flashed successfully despite the error message. I guess the error message has something to do with A/B slot conditions which I'm still not totally understanding. I know that the Moto G7 (not the plus) requires some copy-partitions-AB.zip according to an install guide that I'm using. Again, is good to go, unfortunately I hard bricked after flashing Lineage 18. I was told that I needed latest OTA for the device which I thought was already on there. I connected the device to wifi and tried to run update just before flashing TWRP but updates failed to download. So for now, I'm just another "Brick in the Wall" lol. Noob level 5000, sucks.
The G7 plus also requires a copy-partiosions-AB.zip to prevent bricking from different software on the 2 slots. It can be found somewhere here on the forum. Also there is a way to flash the latest OTA manually via fastboot. A guide can also be found somewhere here on the forum. You can download the OTA images from lolinet (https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/).
Teo S. said:
The G7 plus also requires a copy-partiosions-AB.zip to prevent bricking from different software on the 2 slots. It can be found somewhere here on the forum. Also there is a way to flash the latest OTA manually via fastboot. A guide can also be found somewhere here on the forum. You can download the OTA images from lolinet (https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/).
Click to expand...
Click to collapse
Thanks again Teo. Question : is there a way to unbrick the device if it won't even power up? I've tried every key combo that I could find but can't even get a charging status when I connect it to power. I think it's now certifiably hard bricked. Dunno
TallDarknSamson said:
Thanks again Teo. Question : is there a way to unbrick the device if it won't even power up? I've tried every key combo that I could find but can't even get a charging status when I connect it to power. I think it's now certifiably hard bricked. Dunno
Click to expand...
Click to collapse
Are you using the cable/charger it came with?
Have you tested with a different cable?
jockovonred said:
Are you using the cable/charger it came with?
Have you tested with a different cable?
Click to expand...
Click to collapse
factory cable / charger only, no other cables. I sent the device to a dev for kicks, see if he can un-brick it. Not holding my breath though. Stat tuned . .