Make sure you’ve backed up all of your IMPORTANT DATA before flashing stock ROM.
I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
1) Download RAW firmware here:
ZS570KL:
ZS570KL Pro:
2) Download ASUS Flash Tool here:
3) Install ASUS Flash Tool
4) Now, power off your device and enter Fastboot mode by pressing Power Button + Volume Up button
5) Open ASUS Flash Tool and select your device
6) Select the RAW firmware you've downloaded
7) Click on the Serial Number of your device.
8) Click Start and wait 5-10 minutes (ignore error 5 [FRP ERROR])
Congratulations, you have downgraded to Android Nougat
MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Do you know if this method will relock the bootloader?
Dabiolos said:
Do you know if this method will relock the bootloader?
Click to expand...
Click to collapse
This method will not re-lock bootloader.
To relock, you need to find a CSC firmware (Factory RAW to be precise)
Thanks. I just hoped yours was a raw firmware...
is recommended make a wipe after or before this steps?
soaduddits said:
is recommended make a wipe after or before this steps?
Click to expand...
Click to collapse
Wipe after downgrading
Saktis_STi said:
Wipe after downgrading
Click to expand...
Click to collapse
The Flash tool is giving me the following error !
! C:\Users\ebanegas\Downloads\AFT_Asus_v1.0.0.70_csc.rar: Unsupported archive format. Please update WinRAR to a newer version.
! C:\Users\ebanegas\Downloads\AFT_Asus_v1.0.0.70_csc.rar: El archivo tiene un formato desconocido o está dañado
at last part it said that the file has an unknown format or is broken.
soaduddits said:
The Flash tool is giving me the following error !
! C:\Users\ebanegas\Downloads\AFT_Asus_v1.0.0.70_csc.rar: Unsupported archive format. Please update WinRAR to a newer version.
! C:\Users\ebanegas\Downloads\AFT_Asus_v1.0.0.70_csc.rar: El archivo tiene un formato desconocido o está dañado
at last part it said that the file has an unknown format or is broken.
Click to expand...
Click to collapse
Install the latest WinRAR
Make sure you've uninstalled old WinRAR
Saktis_STi said:
Install the latest WinRAR
Make sure you've uninstalled old WinRAR
Click to expand...
Click to collapse
I was able to install the last version of the Asus Tool Flash, that I downloaded from their page. I will use that!
Thanks!
soaduddits said:
I was able to install the last version of the Asus Tool Flash, that I downloaded from their page. I will use that!
Thanks!
Click to expand...
Click to collapse
Where did you get that?
Saktis_STi said:
Where did you get that?
Click to expand...
Click to collapse
From another forum, Team Android to be exact. The download link is the following one. www.devfiles.co/download/N42hOmzT/Asus_Zenfone_FlashTool_v2.0.1.zip
soaduddits said:
From another forum, Team Android to be exact. The download link is the following one. www.devfiles.co/download/N42hOmzT/Asus_Zenfone_FlashTool_v2.0.1.zip
Click to expand...
Click to collapse
This FlashTool will not work for ZS570KL
Saktis_STi said:
This FlashTool will not work for ZS570KL
Click to expand...
Click to collapse
I tried your link with other computer and got the same error message.
soaduddits said:
I tried your link with other computer and got the same error message.
Click to expand...
Click to collapse
Well, use older Flash Tool then
MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Saktis_STi said:
Well, use older Flash Tool then
MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Click to expand...
Click to collapse
that one works fine, I will do it tonight! Thanks for all your help.
I tryied to do this, after load the file it keeps on "Wait for device rebooting", then I reboot the device manually and I get other status "Read the Software version" while my phone its already turn on and working with the same android version, what should I do next? Enter on recovery mode and make a wipe data?
soaduddits said:
I tryied to do this, after load the file it keeps on "Wait for device rebooting", then I reboot the device manually and I get other status "Read the Software version" while my phone its already turn on and working with the same android version, what should I do next? Enter on recovery mode and make a wipe data?
Click to expand...
Click to collapse
Just close the ASUS Flash Tool & wipe data via recovery mode
Saktis_STi said:
Just close the ASUS Flash Tool & wipe data via recovery mode
Click to expand...
Click to collapse
I did that, but it didnt work, the wipe data was done, but once android load it was the version 8 instead 7.
Saktis_STi said:
This method will not re-lock bootloader.
To relock, you need to find a CSC firmware (Factory RAW to be precise)
Click to expand...
Click to collapse
Hi I have been looking for one of those and I found this rom
CSC_ZS570KL_5.10.1.184_WW_Lock_20171221.zip
on this indonesian website https://www.firmware27.com/2017/10/firmware-asus-zenfone-3-deluxe-z016d.html
Can you confirm that this is the rom we need to finally be able to relock the phone ?
Foi-racer said:
Hi I have been looking for one of those and I found this rom
CSC_ZS570KL_5.10.1.184_WW_Lock_20171221.zip
on this indonesian website https://www.firmware27.com/2017/10/firmware-asus-zenfone-3-deluxe-z016d.html
Can you confirm that this is the rom we need to finally be able to relock the phone ?
Click to expand...
Click to collapse
Yes and it is in testing. Will let you know when that firmware is working.
Related
Hi guys... after an upgrade with firmware finder and hisuite, my honor won't boot up... I have access on e-recovery(useless because i can't download anything), recovery (with only wipe reset/cache) and fastboot... I don't have unlocked bootloader and i never do something like this previous operation... how can i solve and reset the phone?
Xethere said:
Hi guys... after an upgrade with firmware finder and hisuite, my honor won't boot up... I have access on e-recovery(useless because i can't download anything), recovery (with only wipe reset/cache) and fastboot... I don't have unlocked bootloader and i never do something like this previous operation... how can i solve and reset the phone?
Click to expand...
Click to collapse
My friend and I have this problem, I tried everything and I did not succeed. I did not get help, and my phone is still in eRecovery. Please, if you can find the solution, tell me how.
Hope that someone answer this topic... Actually I don't have another phones...
PS: I try wipe/data factory reset and wipe cache partition... but nothing happen...
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
oslo83 said:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Click to expand...
Click to collapse
I've download the package and i installed it into SD card (folder dload etc..) but when i try to installation package (Pow butt + vol up, down) he get the error.
ok so what's do you mean by "after an upgrade with firmware finder and hisuite"?
What was your previous version?
What's the error given? did you use an external sdard wirth dload folder?
oslo83 said:
ok so what's do you mean by "after an upgrade with firmware finder and hisuite"?
What was your previous version?
What's the error given? did you use an external sdard wirth dload folder?
Click to expand...
Click to collapse
So, version before update was b183 Nougat
I format an sdcard on exfat, put the dload folder that you given to me and I try to install while pressing the Shutdown+Vol Up+Vol down... The error is "Software Install failed! - Get Help from emui.com/emotiondownload.php?mod=restore"
Obviously the URL doesn't work.
Have you tried to wipe cache partition in Erecovery ??
Edit : error in dload method , 5% error ??
What error bad packages ?
you were on C432B183 and tried with the C432B130 files?
k1ks said:
Have you tried to wipe cache partition in Erecovery ??
Edit : error in dload method , 5% error ??
What error bad packages ?
Click to expand...
Click to collapse
Yep 5% stuck and after that the error
oslo83 said:
you were on C432B183 and tried with the C432B130 files?
Click to expand...
Click to collapse
Nope the 360a
oslo83 said:
you were on C432B183 and tried with the C432B130 files?
Click to expand...
Click to collapse
Yes need to know original packages installed on it.
And with same packages that update ??
Xethere said:
Nope the 360a
Click to expand...
Click to collapse
????? are you a trolling bot?
k1ks said:
Yes need to know original packages installed on it.
And with same packages that update ??
Click to expand...
Click to collapse
My package was C432B183 and i think i use the C10B360
oslo83 said:
????? are you a trolling bot?
Click to expand...
Click to collapse
No man, please im not here for trolling...
I dont know if it work on it but for know which version with this command adb
adb shell getprop
I think you have crossed two versions
So let's start again.
Check the link i gave you earlier, read its op carefully.
You'll see they are not any B360 files on it...
So when you're telling:
Xethere said:
put the dload folder that you given to me and I try to install while pressing the Shutdown+Vol Up+Vol down...
Click to expand...
Click to collapse
It seems you didn't.
So i'm sorry...
When i was on Android i update my package (b183) with b360.
Now i have the b130... what i need to do?
So you were on C432B183.
You may have tried upgrade to C10B360.
Now your device won't boot into system.
Are the statements are right?
You're telling to have download B130 firmware on the link provided... which one? C10B130 or C432B130?
oslo83 said:
So you were on C432B183.
You may have tried upgrade to C10B360.
Now your device won't boot into system.
Are the statements are right?
You're telling to have download B130 firmware on the link provided... which one? C10B130 or C432B130?
Click to expand...
Click to collapse
Yes, The C432B130
ONLY FOR A605FN,
ATTENTION,
this method is no longer the best option,
for root A6 + I recommend following the ashyx tutorial in the following post:
https://forum.xda-developers.com/galaxy-a6/development/recovery-twrp-3-2-3-1-galaxy-a6-a605-t3868598
1 - Backup your files.
2 - Flash this patchet boot.img with ODIN -
Download for A605FN (A605FNXXU1ARE2 PHE)
Download for A605FN (A605FNXXU2ARG2 PHE)
3 - When reboot your device automatic restore (dont worry,remember step 1).
4 - Install Magisk.apk and SuperUser working.
THANKS TO MAGISK FOR THE NEW ROOT METHOD WITHOUT RECOVERY
If I have helped you, invite me to a beer by clicking HERE.
Do it work with a605G. Thạnk
Safetynet
Does safetynet check work?
Anyone already try A605G
Andrianovaldi said:
Anyone already try A605G
Click to expand...
Click to collapse
I've tried and I get error Only offical binary is allowed to boot.
josemaesra said:
Click to expand...
Click to collapse
Can you make a file for A605G. This is the stock boot.img of A605G. Thank you very much
https://drive.google.com/file/d/1rKBan8G8ht73kSXPuciE4O_Qp6uqqXz_/view?usp=sharing
So I couldn't get safetynet check to work, is it just me or?
Codelyoko2409 said:
I've tried and I get error Only offical binary is allowed to boot.
Click to expand...
Click to collapse
U already activated oem unlock?
Andrianovaldi said:
U already activated oem unlock?
Click to expand...
Click to collapse
Yes. I flashed successfully but when I boot my phone. It show error
Codelyoko2409 said:
Can you make a file for A605G. This is the stock boot.img of A605G. Thank you very much
https://drive.google.com/file/d/1rKBan8G8ht73kSXPuciE4O_Qp6uqqXz_/view?usp=sharing
Click to expand...
Click to collapse
For A605G - Download
josemaesra said:
For A605G - Download
Click to expand...
Click to collapse
Thanks. But I can not test right now. I has to wait for a week
josemaesra said:
1 - Backup your files.
2 - Flash this patchet boot.img with ODIN - Download for A605FN.
Download for A605G
3 - When reboot your device automatic restore (dont worry,remember step 1).
4 - Install Magisk.apk and SuperUser working.
tried on A605FNXXU1ARE2
Click to expand...
Click to collapse
so, i just simply flash the boot.img, restart normally then instal supersu? need more detail steps and explanations
3 - When reboot your device automatic restore (dont worry,remember step 1). >> what;s mean remember step 1??
Codelyoko2409 said:
Yes. I flashed successfully but when I boot my phone. It show error
Click to expand...
Click to collapse
Pls try the new one sir
Andrianovaldi said:
Pls try the new one sir
Click to expand...
Click to collapse
Sorry. I hace to wait for 4 day to have oem unlock
an-_-dro said:
so, i just simply flash the boot.img, restart normally then instal supersu? need more detail steps and explanations
3 - When reboot your device automatic restore (dont worry,remember step 1). >> what;s mean remember step 1??
Click to expand...
Click to collapse
After flashing the boot image the device is restored and all personal files are deleted,
that's why it's important to remember step 1.:good:
[
josemaesra said:
After flashing the boot image the device is restored and all personal files are deleted,
that's why it's important to remember step 1.:good:
Click to expand...
Click to collapse
I already try boot.img for SM-A605G and get error not_dev bla bla, and i try boot.img for A605FN and sucessfully flashed and after reboot it say verification failed and must factory reset then i factory reset and succses untill homescreen, then i try acces twrp with volume up + down + power and show error u only official binary allowed to boot bla bla??
Andrianovaldi said:
[
I already try boot.img for SM-A605G and get error not_dev bla bla, and i try boot.img for A605FN and sucessfully flashed and after reboot it say verification failed and must factory reset then i factory reset and succses untill homescreen, then i try acces twrp with volume up + down + power and show error u only official binary allowed to boot bla bla
Click to expand...
Click to collapse
Currently there is no TWRP for A6 +,
this method is only to have superuser permissions.
After the factory reset only install Magisk.apk and you will have Superuser.:good:
josemaesra said:
Currently there is no TWRP for A6 +,
this method is only to have superuser permissions.
After the factory reset only install Magisk.apk and you will have Superuser.:good:
Click to expand...
Click to collapse
Ah i see, so after i factory reset and succesfully show homescreen i just install magisk.apk and done? Pfff now i must wait 7days or 14 days again too do it again?
josemaesra said:
Currently there is no TWRP for A6 +,
this method is only to have superuser permissions.
After the factory reset only install Magisk.apk and you will have Superuser.:good:
Click to expand...
Click to collapse
only magisk or superSU will work also? im not really like magisk for those complicated, superSU lot simple.
Andrianovaldi said:
Ah i see, so after i factory reset and succesfully show homescreen i just install magisk.apk and done? Pfff now i must wait 7days or 14 days again too do it again
Click to expand...
Click to collapse
bro, u're from indonesia right? your handset 6+ A605G/DS? the one which is working is img for A605FN?
which version f/w your currently on? i'm on ARG1.
I have permission to unlock bootloader but dont have access to a pc atm. Can I flash the rom zip file through locked bootloader without twrp ?
Distrackto said:
I have permission to unlock bootloader but dont have access to a pc atm. Can I flash the rom zip file through locked bootloader without twrp ?
Click to expand...
Click to collapse
Yes u can. Follow this thread and search for miui 10 recovery (twrp) zip and update through Updater app since its global beta u can flash without twrp.
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
I downloaded the zip version and installed from the update screen. Haven't unlocked bootloader. It's working really well.
Whoamitosayanything said:
I downloaded the zip version and installed from the update screen. Haven't unlocked bootloader. It's working really well.
Click to expand...
Click to collapse
Can you share the link please
Whoamitosayanything said:
I downloaded the zip version and installed from the update screen. Haven't unlocked bootloader. It's working really well.
Click to expand...
Click to collapse
Any Problems after Update?
Is Miui 10 faster then 9?
Not sure if placebo but it feels faster to me. I think there's a youtuber who showed it was faster as well.
Did it wipe data on your phone using this method? If so, is the internal storage wiped as well?
Distrackto said:
Can you share the link please
Click to expand...
Click to collapse
Does it wipe your data (apps, internal storage etc)
MasterFURQAN said:
Does it wipe your data (apps, internal storage etc)
Click to expand...
Click to collapse
It'll wipe everything. All of internal storage.
Link plz guys.
azaan477 said:
It'll wipe everything. All of internal storage.
Click to expand...
Click to collapse
. I guess I'll wait for the official stable update then. I'm too lazy to backup the humungous amount of pics and apps in my phone.
Distrackto said:
Link plz guys.
Click to expand...
Click to collapse
en.miui.com/download-355.html
Download Developer Full ROM.
It says MIUI 9 but actually is MIUI 10.
lambebaal said:
en.miui.com/download-355.html
Download Developer Full ROM.
It says MIUI 9 but actually is MIUI 10.
Click to expand...
Click to collapse
I need to flash it through updater app right ? On locked bootloader.
Correct
Distrackto said:
I need to flash it through updater app right ? On locked bootloader.
Click to expand...
Click to collapse
Yes.
Also, make a copy of the downloaded zip file because the contents of the zip file changes during flashing. So, you need to use different zip file than the one used previously in case the upgrade fails.
lambebaal said:
Yes.
Also, make a copy of the downloaded zip file because the contents of the zip file changes during flashing. So, you need to use different zip file than the one used previously in case the upgrade fails.
Click to expand...
Click to collapse
Upgrade fails as in bootloop ?
Distrackto said:
Upgrade fails as in bootloop ?
Click to expand...
Click to collapse
Nope. My wording was wrong. Sometimes the updater app can't verify the zip file and shows error like "Can't install unofficial ROM". I was referring to that case.
https://forum.xda-developers.com/poco-f1/how-to/poco-f1-stock-image-9-6-18-0-oejmifd-t3836433
I am on 8.9.13
Iam not able to install the global beta version ! ..... It shows installation of unauthorised rom is not allowed.
Langpang said:
Iam not able to install the global beta version ! ..... It shows installation of unauthorised rom is not allowed.
Click to expand...
Click to collapse
Download ROM zip file again.
Hi there,
I used various ROMs and wanted to show appreciation to all developers for their work. Unfortunately, i use several apps that do not work well with unrooted Poco F1. What are the steps to unroot and go back to stock version of phone? I've tried the guide that uses Mi Flash tool but I cannot make it work. Is there a guide to unistall twrp, lock bootloader and how to flash stock stable rom in order to get OTA updates and phone as when it comes out of the box?
Many thanks to who will help me.
Manuel
no one?
I don't know about locking the bootloade, but for unrooting maybe just flash stock global rom without disabling forced encryption
Dedalus73 said:
Hi there,
I used various ROMs and wanted to show appreciation to all developers for their work. Unfortunately, i use several apps that do not work well with unrooted Poco F1. What are the steps to unroot and go back to stock version of phone? I've tried the guide that uses Mi Flash tool but I cannot make it work. Is there a guide to unistall twrp, lock bootloader and how to flash stock stable rom in order to get OTA updates and phone as when it comes out of the box?
Many thanks to who will help me.
Manuel
Click to expand...
Click to collapse
what was the problem with mi flash tool, it would be helpful to know. you did try flashing a fastboot image ?
As for unrooting if u clean flash any custom rom without flashing magisk ( basically if u don't root) all ur bank application would work.
anshu945 said:
what was the problem with mi flash tool, it would be helpful to know. you did try flashing a fastboot image ?
As for unrooting if u clean flash any custom rom without flashing magisk ( basically if u don't root) all ur bank application would work.
Click to expand...
Click to collapse
Mi flash tool always says error "couldn't find file flash_all_expect_system.bat"
Dedalus73 said:
Mi flash tool always says error "couldn't find file flash_all_expect_system.bat"
Click to expand...
Click to collapse
hi, u are trying to flash ota or recovery file using mi flash tool.
what u need is fastboot rom.
here --- https://en.miui.com/thread-3757763-1-1.html
if u need a guide with images to follow here u go -- http://en.miui.com/a-234.html
keep in mind u need to download the fastboot rom file not the recovery rom.
then extract the file and flash it.
and if u want to lock the bootloader too, then use " clean all and lock " option
it will restore ur phone to 100% stock and relock ur bootloader.
NEVER use the option 'flash factory' by mistake.
i hope i was clear enough if any doubt ask or search xda before proceeding.
if u need a guide with images to follow here u go --http://en.miui.com/a-234.html
anshu945 said:
hi, u are trying to flash ota or recovery file using mi flash tool.
what u need is fastboot rom.
here --- https://en.miui.com/thread-3757763-1-1.html
if u need a guide with images to follow here u go -- http://en.miui.com/a-234.html
keep in mind u need to download the fastboot rom file not the recovery rom.
then extract the file and flash it.
and if u want to lock the bootloader too, then use " clean all and lock " option
it will restore ur phone to 100% stock and relock ur bootloader.
NEVER use the option 'flash factory' by mistake.
i hope i was clear enough if any doubt ask or search xda before proceeding.
if u need a guide with images to follow here u go --http://en.miui.com/a-234.html
Click to expand...
Click to collapse
Sorry man, I've followed step by step as I did before and the Xiaomi flash doesn't work, same error as before.
Dedalus73 said:
Sorry man, I've followed step by step as I did before and the Xiaomi flash doesn't work, same error as before.
Click to expand...
Click to collapse
can u upload the image of the main folder u extracted or just list the contents.
how can .bat file be missing.
anshu945 said:
can u upload the image of the main folder u extracted or just list the contents.
how can .bat file be missing.
Click to expand...
Click to collapse
will do in 3 mins. downloading again the tgz file
Dedalus73 said:
will do in 3 mins. downloading again the tgz file
Click to expand...
Click to collapse
OK,
u might have to decompress it 2 times though i think, first u will get a zip file from the .tgz file then exrtract again.
anshu945 said:
OK,
u might have to decompress it 2 times though i think, first u will get a zip file from the .tgz file then exrtract again.
Click to expand...
Click to collapse
see screenshot
Dedalus73 said:
see screenshot
Click to expand...
Click to collapse
i don't see any problem here man. if u previously flashed from this folder it should always work.
u can try this tool https://forum.xda-developers.com/poco-f1/development/tool-tool-one-driverstwrpfactory-t3866189
i didn't use this tool for poco but used this guys tool for my A1 i think.
anshu945 said:
i don't see any problem here man. if u previously flashed from this folder it should always work.
u can try this tool https://forum.xda-developers.com/poco-f1/development/tool-tool-one-driverstwrpfactory-t3866189
i didn't use this tool for poco but used this guys tool for my A1 i think.
Click to expand...
Click to collapse
Ok...now it worked. Only difference is where I saved the extracted files, it worked by saving them on the desktop, it wouldn't work when I saved them under documents/PocoF1/Roms/
very very weird. Thanks for your patience and help. I'm usually good at following directions
Dedalus73 said:
Ok...now it worked. Only difference is where I saved the extracted files, it worked by saving them on the desktop, it wouldn't work when I saved them under documents/PocoF1/Roms/
very very weird. Thanks for your patience and help. I'm usually good at following directions
Click to expand...
Click to collapse
no worries man, win 10 does mess with us from time to time
Dedalus73 said:
see screenshot
Click to expand...
Click to collapse
pls give me that flash_all.bat
I have full guide here. https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
Hi to all guys.
I have a problem, I would like to install twrp and gsi on my phone but I have been trying for now 1 week without success.
has any of you successfully installed a gsi on this mobile phone? s10 lite 2020 g770f?
I state I am with android 11 stock and bootloader already unlocked
thank s to all
maekonexus said:
Hi to all guys.
I have a problem, I would like to install twrp and gsi on my phone but I have been trying for now 1 week without success.
has any of you successfully installed a gsi on this mobile phone? s10 lite 2020 g770f?
I state I am with android 11 stock and bootloader already unlocked
thank s to all
Click to expand...
Click to collapse
What if you click DSU loader in developer options
LR7875 said:
What if you click DSU loader in developer options
Click to expand...
Click to collapse
What do you mean dsu loader in developer optional im a italian guy
maekonexus said:
What do you mean dsu loader in developer optional im a italian guy
Click to expand...
Click to collapse
Click 7 times build number in settings> about phone. Then click on two times back button. Select developer options.
Click into it and find 'DSU loader' or 'Dynamic system updates'.
If you can't find it find 'feature flags ' and set what with the word 'dynamic' in it as on.
i find it, but it says experimental.
what can i do?
maekonexus said:
i find it, but it says experimental.
what can i do?
Click to expand...
Click to collapse
Just enable it
LR7875 said:
Just enable it
Click to expand...
Click to collapse
How i enable it?
Oh I see, your oem unlock is greyed out, did you unlock your bootloader?
Yes i unlocked the bootloader, when i power on the phone it turns out that this phone has the bootloader unlocked
Sorry but you need to have TWRP recovery software to flash one as you do not have dynamic system updates.
You will need to wait.
LR7875 said:
Sorry but you need to have TWRP recovery software to flash one as you do not have dynamic system updates.
You will need to wait.
Click to expand...
Click to collapse
But i can install twrp but the system.img doesn't work
*This is likely to brick your device. Make sure that you can reflash stock ROM (www.samfw.com) and make sure to backup. Only install if you really have to. I was not responsible as you have been warned!
Well last resort:
Install 7zip.
Download
Rename your GSI as system.img. This is a must.
Open 7zip. If you can't just find C:\program files/7zip/7zFM.exe. and click on it and 7zip will open.
Navigate to your GSI (system.img).
Click on the system.img and select files, then 7zip, then add to archive.
A window will pop up. Select .TAR as the compression format and click compress.
After that,
Just flash your .tar via Odin.
Aaaahhh
LR7875 said:
*This is likely to brick your device. Make sure that you can reflash stock ROM (www.samfw.com) and make sure to backup. Only install if you really have to. I was not responsible as you have been warned!
Well last resort:
Install 7zip.
Download
Rename your GSI as system.img. This is a must.
Open 7zip. If you can't just find C:\program files/7zip/7zFM.exe. and click on it and 7zip will open.
Navigate to your GSI (system.img).
Click on the system.img and select files, then 7zip, then add to archive.
A window will pop up. Select .TAR as the compression format and click compress.
After that,
Just flash your .tar via Odin.
Click to expand...
Click to collapse
Ok i should flash the system.img = tar wiht odin?no twrp?
So i flash only system.img = tar and Nothing?
maekonexus said:
Aaaahhh
Ok i should flash the system.img = tar wiht odin?no twrp?
So i flash only system.img = tar and Nothing?
Click to expand...
Click to collapse
Yes
LR7875 said:
Yes
Click to expand...
Click to collapse
are you sure I don't have to flash vbmeta or twrp first? I have to flash the .tar so without doing anything? from stock rom with unlocked bootloader I go to download mode and flash the .tar?