Hello everybody,
Since the OREO update, it is impossible to connect dji drone to your phone.
That say if someone find a workaround, lets us know
If you want to flight your drone, do not update your phone... I seems that the USB detection is lost and not stable....
Cheers
Hi, for me everything seems fine. I've used DJI go 4 app on Oreo few days ago and didn't have any problems. Do you have issues when connecting to controller or to drone?
mmmh have you wipe your phone after the update?
the phone is recognised 1 seconds by the app and then disconnected. Le remote <-> drone link works.
I have tried to reboot everything, update drone and remote.... reinstall dji go 4... nothing change.
my last idea is the factory reset but I would like to avoid this solution..
Thank you for your feedback
sam.verdon said:
mmmh have you wipe your phone after the update?
the phone is recognised 1 seconds by the app and then disconnected. Le remote <-> drone link works.
I have tried to reboot everything, update drone and remote.... reinstall dji go 4... nothing change.
my last idea is the factory reset but I would like to avoid this solution..
Thank you for your feedback
Click to expand...
Click to collapse
Try to wipe dalvik/cache.
Vatt`ghern said:
Try to wipe dalvik/cache.
Click to expand...
Click to collapse
Yes i tried today, and also a full factory reset... nothing change.
The actual workaround is to downgrade to android 7..
OK for LG G6 Android 8.0.0 + DJI Spark + RC (no cable)
Hi all,
I'm from Italy.
I received Oreo Android 8.0.0 on my LG G6 yesterday and I have just done my first flight with my Spark without any problem.
So, for me everything it's all right.
I didn't use the cable between rc and phone.
After a downgrade to android 7.0, everything works fine! Not satisfied with this workaround but i have not found a better solution
Hi guys and gals!
I've recently purchased my DJI Spark and wanted to connect it via OTG cable to my LG G6. Seems like I've hit the same wall as you, meaning G6 doesn't connect to RC anymore via OTG cable after the Oreo update.
That said I started an official thread on DJI Forum and also contacted LG Support department. Agent that I talked to, promised to pass the issue to another (appropriate) department for the investigation.
It would be great if all of us contact LG and report this problem. Maybe, in that case, they would release some fix (maybe with next update) for something that apparently worked perfectly fine with Android 7.0.
hey everybody! I got h870ds and mavic pro and had the same issue (phone couldn't connect to dji go app, though drone was perfectly connected to RC) after oreo update. What helped me was downgrade of drone and RC's firmwares using DJI Assistant to previous version. Today I launched the drone, everything went without any problems.
I didn't want to downgrade my phone bc I love oreo much more than nougat on lg g6. Hope my story will help you guys. Also I would recommend using dji assistant on mac since windows version was kinda buggy (no progress after reaching 99 per cent) just fyi
To which exact version have you downgraded RC and Mevic firmware?
What about DJI Go app? Which versing are you using?
vitoski said:
To which exact version have you downgraded RC and Mevic firmware?
What about DJI Go app? Which versing are you using?
Click to expand...
Click to collapse
In this terms dji go app version is not key factor. The latest actual version of the app should work perfectly
speaking of the drone and rc, I installed 01.04.0300 (february one) for both devices. The one I had problems with was the latest 01.04.0400.
I am not telling you that this was the root of the problem but results are speaking for themselves: now lg g6 with oreo connects with RC and drone.
Ok. I'll not be able to test this as I have spark and it didn't follow the same firmware numbering.
Maybe others with Mavic Pro and LG G6 would benefit from your finding.
Out of curiosity, what made you downgraded the firmware? Did you know it's gonna help or just trying different things?
vitoski said:
Ok. I'll not be able to test this as I have spark and it didn't follow the same firmware numbering.
Maybe others with Mavic Pro and LG G6 would benefit from your finding.
Out of curiosity, what made you downgraded the firmware? Did you know it's gonna help or just trying different things?
Click to expand...
Click to collapse
I tried different cables, different apps, different combinations of powering up sequences, using debug mode - none would do the thing. I ve seen messages about downgrading the phone but for me it was not the option since I was really waiting oreo update and I liked it. If downgrading rc and drone wouldn't work I have a backup xiaomi redmi note 2, that still works ok, but videostream was lagging as well as the manual commands (lame backup phone).
Hi.I found out that contact DJI was useless.They won't fix the software problem.They only tell me is to swap to another capable phone that DJI supported.
Got exactly the same answer yesterday in my thread in Dji forum.
There is one other way we can "force" DJI to do something about it. One guy on DJI forum made the thread in the form of poll/vote for people experiencing the same issue as he did to vote.
Then he opened DJI support ticket and linked that thread.
Finally DJI acknowledged the issue and fixed it in one of the next releases.
UPDATE!
One of the users called Plujesz from the DJI forum found a way to connect LG G6 running OREO to RC via OTG cable. The workaround is pretty simple and works for both DJI Spark (I checked that myself) and DJI Mavic Pro. Have a look at this video for more details: https://www.youtube.com/watch?v=d_4tltiX3uk&feature=youtu.be
I tested this workaround on the following setup and it worked fine:
Spark firmware: V 01.00.1000
RC firmware: V 01.00.0600
DJI GO 4: v4.2.21
LG G6: Oreo (V20b-EUR-XX)
All credits go to Plujesz for finding this workaround.
Works for me
With my spark and the latest version of firmwares and app today 2019/03/08.
I went using the debug mode until I got a stable connection (it stops vibrating and it appears that a device has just been connected).
After opening the application without marking that always opens when you connect that device, if you mark it there is a problem and you have to delete the applications that are opened by default.
And finally you have to close and reopen the application.
Related
Hello everyone!
I'm having an extremely frustrating issue. It seems that no matter what I do, I cannot make this phone work with Android Auto. I saw one other thread on here regarding AA, but there were no solutions and I wasn't sure if it was the same problem or not, so I thought I'd ask you all for some help.
My car is the 2016 Chevy Spark. AA worked perfectly fine in this car with my LG G3 on both Lollipop and Marshmallow.
My current phone is the KIW-L24. When I first got it, it was on Lollipop. Android Auto had zero function--the phone didn't even detect it at all, it would only charge. I tried several different cords, pre-installing the AA app, every USB mode and debugger mode, nothing. I updated to Marshmallow. I tried all of that again. After that, I began to wonder if maybe the issue was with the Emui OS. So I installed Resurrection Remix. With Resurrection Remix, I have actually made some progress. Using the cord that came with the phone, I can plug it into the car and get the Google Play Services notification saying that my phone is connected. However, when I first connect it the screen just goes black for a second, then goes back to the home screen. Despite the fact that Google Play Services says it's running AA, there is zero projection happening. Just that notification bar, and the Android Auto app as a black, unresponsive square if I check my currently running apps. If I tap it to open it, I just get the same flicker of a black screen before returning to my home screen. It does, however, say in the AA app that it has been paired with my car. So it's sort of working... but still doesn't appear on the car's touchscreen.
I read on one forum that a newer update of Google Play services apparently messed up AA for some phones, and was wondering if that could be the issue. However, when I try to install the apk for 9.0.83 (which was apparently the last one to work), it just says "Application not installed." Because of my inability to downgrade to that version, I've been unable to test if that is the issue.
I have tried calling the Huawei Support. They basically just said "We don't know--tough luck."
Does anyone have any ideas that might help? One of the reasons I bought this car in the first place was that I really like AA, and I seem to be one of very few people to encounter this issue. All I want is for this phone to do what it's supposed to do I'm already sort of feeling hopeless, like I threw my money down the drain with this phone. I would prefer to stay with RR if possible, but will really do anything to my phone if it means getting AA to work.
Thanks in advance for any assistance.
Car: Chevy Spark 2016
Phone: Huawei Honor 5X
Model: KIW-L24
Current OS: ResurrectionRemix 5.7.0-20160626-kiwi
I have the same issue running the unofficial CM 13 on my Honor 5x and Android Auto on a Honda Civic EX-T 2016. Phone charges just isn't detected at all, don't even get a USB type option like when on a computer (the options for just charging, mtp, etc).
grpace said:
I have the same issue running the unofficial CM 13 on my Honor 5x and Android Auto on a Honda Civic EX-T 2016. Phone charges just isn't detected at all, don't even get a USB type option like when on a computer (the options for just charging, mtp, etc).
Click to expand...
Click to collapse
I'm in the 2016 Civic Touring, same exact issue, but even charing is iffy. On a nightly of CM13 for my Honor5x from like 2 weeks ago, hadn't seen any mention of improvements and was wondering if it was worth upgrading to a new build?
My Honor 5X worked fine with Android Auto on Lollipop with my Kia Optima. When I upgraded to Marshmallow the audio stopped working. I went back to Lollipop and it worked fine. I wiped my phone then updated to Marshmallow again and it works fine with AA again.
Sent from my Honor 5X using Tapatalk
I installed android auto and it says "incopatible phone". How did you get pass that?
I never saw that message.
Sent from my Honor 5X using Tapatalk
So i'd updated to the nightly build on the 10th, and it worked fine for a few days. Now im getting the incompatible phone message, and updating to the latest nightly didn't fix it. What happaned? Was there a silent Android Auto app update that i missed?
I am trying to figure out what makes this issue happen, unfortunately I can't find an explanation.
maybe u should do a factory reset
palasx said:
So i'd updated to the nightly build on the 10th, and it worked fine for a few days. Now im getting the incompatible phone message, and updating to the latest nightly didn't fix it. What happaned? Was there a silent Android Auto app update that i missed?
Click to expand...
Click to collapse
Try a factory reset or a clean install.
I did a clean install of the CM13 nightly 10/22, no change. Wondering if anyone else has android auto working on any of the newer CM13 nightlies? The last one that i had that worked was an unofficial built from like 9/20, before it got official support.
I am on stock marshmallow and Android Auto doesn't work either.
CM 12 on an S3 Mini works fine.
Sent from my KIW-L21 using XDA Free mobile app
almico said:
I am on stock marshmallow and Android Auto doesn't work either.
CM 12 on an S3 Mini works fine.
Click to expand...
Click to collapse
You can extend your concerns with the CM13 developers.
Sent from my honor 5X using XDA Labs
Mine was working fine until the latest AA update. ?
Sent from my KIW-L24 using Tapatalk
Anyone ever figure a solution for this?
In a couple hours I will try my 5X stock on my brand new car. Will let you know.
Sent from my KIW-L21 using XDA Free mobile app
I have a feeling you will be disappointed. It seems both the stock ROM and custom ROMs don't work with AA.
Sent from my KIW-L24 using Tapatalk
Ok. I didn't know how to use, therefore I could have done things not in an optimal way, but it worked. I could see Maps and notifications from, for example, WhatsApp. I did nothing extensive, but it seems to work.
My feeling is that it is slow, but my 5X is slow doing almost everything
Sent from my KIW-L21 using XDA Free mobile app
That was with a USB physically attached to the car, right? Recently AndroidAuto made an update to connect to cards with BlueTooth, but that does not do screen mirroring FROM phone TO car. (aka, everythign still shows on the phone and not in in-dash infotainment unit).
Yes. Connected via USB cable.
Sent from my KIW-L21 using XDA Free mobile app
Hi
Since updating to Nougat the quality of the bluetooth audio is terrible, it seems to fluctuate between all the time and can get very crackly and hissy.
Is anyone else experiencing anything like this - I updated using LG Bridge.
Thanks
Richard
Rlwhittle said:
Hi
Since updating to Nougat the quality of the bluetooth audio is terrible, it seems to fluctuate between all the time and can get very crackly and hissy.
Is anyone else experiencing anything like this - I updated using LG Bridge.
Thanks
Richard
Click to expand...
Click to collapse
All ok Here, using a Bluetooth Speaker
I've tried it with several speakers and several apps - I've also factory reset my phone but it's no different.
Rlwhittle said:
I've tried it with several speakers and several apps - I've also factory reset my phone but it's no different.
Click to expand...
Click to collapse
Don't what could be the problem, using the stock app with a Bluetooth Speaker in my case works the same as with marshmallow
I've emailed LG and got the attached reply - he mentions that there are problems with Android 7, but I think this might be a generic answer to blame android instead of themselves.
Rlwhittle said:
I've emailed LG and got the attached reply - he mentions that there are problems with Android 7, but I think this might be a generic answer to blame android instead of themselves.
Click to expand...
Click to collapse
It can be True, after all it can be a specific problem with some Speakers, who knows.
Rlwhittle said:
I've emailed LG and got the attached reply - he mentions that there are problems with Android 7, but I think this might be a generic answer to blame android instead of themselves.
Click to expand...
Click to collapse
Hi,
I also have problems with my Bluetooth (headset Bluejay X2) after the Nougat upgrade. Media works 2-5 minutes, then audio just stops... the device looks connected and the media player continues to play (silently then). I have done all trouble shooting tips I've found and eventually I also did a factory reset, still same problem. I also have an android wear connected (Sony Smartwatch 3)... actually, I will test to disconnect the phone and see if the audio works better then.
Thanks for contacting LG. I will try to do the same; I sincerely hope they will send out a fix soon, as there to my knowledge is no way to (easily) roll back to Marshmallow.
olabil123 said:
Hi,
I also have problems with my Bluetooth (headset Bluejay X2) after the Nougat upgrade. Media works 2-5 minutes, then audio just stops... the device looks connected and the media player continues to play (silently then). I have done all trouble shooting tips I've found and eventually I also did a factory reset, still same problem. I also have an android wear connected (Sony Smartwatch 3)... actually, I will test to disconnect the phone and see if the audio works better then.
Thanks for contacting LG. I will try to do the same; I sincerely hope they will send out a fix soon, as there to my knowledge is no way to (easily) roll back to Marshmallow.
Click to expand...
Click to collapse
A short update; problem persists. I have tried to clear system cache and now also forced the bluetooth apps to stop. Here I come to a question...
When wanting to clear Bluetooth app, I discover that I have two different apps called "Bluetooth", only difference is that one has version 5.30.18 and one has version 7.0. Should it be like this? If not, is it possible to disable one of them?
olabil123 said:
When wanting to clear Bluetooth app, I discover that I have two different apps called "Bluetooth", only difference is that one has version 5.30.18 and one has version 7.0. Should it be like this?
Click to expand...
Click to collapse
Yes, I have both of these too and no problems. I use Bluetooth with wireless headphones from Bragi.
silviumc said:
Yes, I have both of these too and no problems. I use Bluetooth with wireless headphones from Bragi.
Click to expand...
Click to collapse
Ok, thanks... bummer, thought it might had to do something with the problem. It might have to do with the model of headphones (still a Nougat problem though), but I don't know; don't seem to have the same problem in the car, but I do not use BT audio very much there.
One thing I have noticed on my Jaybird X2's is: when this happens and I trigger "Ok Google" (long pressing the talk button), the audio starts working again (after I cancel the "Ok Google"). So... still confused, but on a higher level
My Lg G5 has some strange problems, if i have Bluetooth enabled my Wifi connection is so bad thats not funny.
If i disable Bluetooth suddenly i have full Wifi bandwidth back
Its a good Smartphone but this is something that should not happen.
Does anyone else have this strange behaviour to ?
I can not post the Links to the pictures because I'm new
LG G5 H850 Europe
Android 7.0 V20a-262-02 Vodafone Branding
Everything is stock.
Knochenjonny said:
My Lg G5 has some strange problems, if i have Bluetooth enabled my Wifi connection is so bad thats not funny.
If i disable Bluetooth suddenly i have full Wifi bandwidth back
Its a good Smartphone but this is something that should not happen.
Does anyone else have this strange behaviour to ?
I can not post the Links to the pictures because I'm new
LG G5 H850 Europe
Android 7.0 V20a-262-02 Vodafone Branding
Everything is stock.
Click to expand...
Click to collapse
Factory reset didn't help? Definitely not normal. Is there a kdz for your phone? Was it used when you bought it?
Sent from my LGE LG-H830 using XDA Labs
Will try reset the days. LG Support told me the same.......
Strange.
The Phone is brand new, and yes there are KDZ for them.
Maybe i flash the Open KDZ if i have to reset it anyway i can get rid of Vodafone Branding.
So this Problem is not normal, thats good to know.
Mine does the same thing, you're not alone
Problem Solved
Sorry for late answering.
The Problem is solved like LG told me.
I have flashed Open Europe Firmware and it works great again.
Bluetooth enabled, Wifi enabled, Wifi as fast as my DSL Speed can get. Yeahhh
Happy LG G5 User again ^_^
I've did some research after this behaviour happens again tonight.
I tried tu update some Apps via Playstore and noticed that it takes wayyyyy to long for only 7 MB.
So i thought 'ohhh no' problem is back BUT ^^ i have remembered what i have done the last time with my bluetooth.
Simple as possible I have a I5 Plus Smartwatch and the necessary app Zeroner Health.
Tonight i powered off the bracelet but the App is still running in the background.
Only turned the bracelet on again trying another App Update via Wlan and Yeahhhh FULLSPEED xDDD
so it seems if the App is running and the bracelet is turned off it trys to communicate all the time and is disturbing the Wifi
(most Wifi Chips have the BT part included, many Laptops doing so)
So cheap chinese App is killing my Wifi if the corresponding device is turned off.
:good:
Hello,
since i have updatet to Android Nougat 7.0 last week i am unable to start the Android Wear app. The only thing i see is the Android Wear and the Google logo.
I have a Sony Smartwatch 3 and it wouldn't be very nice if this wouldn't work any more.
Could someone try, if the App works with another Z5C on Nougat?
Best Regards
Zillinda
it works on mine, i have a moto 260 gen 2, that is on wear 1.5.
i have intermittent bluetooth problems, the phone disables bluetooth sometimes.
I also have a smartwatch 3 at home that i stopped using a while ago, if you want i can check if i can pair it with my phone.
Also, i did a clean install of 32.3.0.378 and i wiped my watch to re-pair it with my phone
Zillinda said:
Hello,
since i have updatet to Android Nougat 7.0 last week i am unable to start the Android Wear app. The only thing i see is the Android Wear and the Google logo.
I have a Sony Smartwatch 3 and it wouldn't be very nice if this wouldn't work any more.
Could someone try, if the App works with another Z5C on Nougat?
Best Regards
Zillinda
Click to expand...
Click to collapse
I am having the same problem. Have you found a fix for it yet. I have a Samsung Galaxy S7 Edge with a Huawei watch. I am just getting the Android Wear Google logo and the app won't open. With that I can't resync my apps. It just started when my phone updated to nougat
DirtyJailGuard said:
I am having the same problem. Have you found a fix for it yet. I have a Samsung Galaxy S7 Edge with a Huawei watch. I am just getting the Android Wear Google logo and the app won't open. With that I can't resync my apps. It just started when my phone updated to nougat
Click to expand...
Click to collapse
I tried to reset my phone to factory status and now the app works.. I don't know what the problem was and it was really annoying to reinstall every app but now it works.
Zillinda
Hi all,
Just OTA upgraded my Z5 to Nougat and it immediately stopped my Sony Smartwatch 3 connecting, have tried resetting both phone and watch, to no avail. I then tried connecting my SW3 to my wives older sony phone and it worked perfectly, is anyone else having the same problem.
I have been a very loyal Sony customer over the years, but now after promising in writing that they would upgrade the SW3 to android wear 2.0 and then going back on their word and now not being able to use it at all since their official nougat upgrade, don't think I will buying another Sony Phone or accessory ever again, they used to be brilliant, really don't know what has happened to them lately.
Many thanks for your time in this matter, I look forward to reading your comments on this matter.
Kindest Regards - Ashe.
Hey there.
As part of an insurance claim I managed to get ahold of a HD1910 (power plug is american.)
After setting up the device, it seems to contain considerably more bugs than my old HD1913 (European, Danish).
I am experiencing issues from lack of stability of the bluetooth connection to my OnePlus Buds, through Spotify cutting out for a moment when starting some games, to Android Auto selector button disappearing. All on the new phone. The old one, which I still have, works fine in regards to all of the above.
Can anyone tell me if I should expect a different experience between the two phones? And what I can do to investigate further?
HD1910 runs OOS 10.0.10.HD01AA
HD1913 runs OOS 10.0.9.HD01BA
Thanks in advance!
Sanniya
Did you update and do a factory reset after?
HD1910 LATEST OOS is actually 10.0.11.HD01AA via Oxygen updater.
First thing I did was update. I received the phone on Friday.
Today I did factory reset in an attempt to fix the issues, but at least the Bluetooth one still is there.
Havent checked android auto, as I figured it wouldn't make much difference.
Ok, so I updated both phones to 10.0.11 using oxygen updater..
Turns out the Spotify interruption is the HD audio: aac setting on Bluetooth headset.
I'll give the new phone another android auto chance tomorrow