I am in a massive pickle here.
I installed root on my phone but stupidly enough I forgot to FRP unlock my phone. with also phone unlocked
Phone unlocked
FRP lock
My phone now only boots into erecovery and twrp doesn't load on my phone anymore and have tried multiple times to load it up again.
I have factory reset my phone and tried multiple stock roms to install but all get stuck at 5% and fail.
My build number is ANE-LX1 8.0.0.103(C782)
I then went to DC unlocker to remove FRP and came up with their own error code 'unknown error 405'
I am now stuck on what to do as fastboot device works but when i try to flash something all i get is command failed.
First : have you download your build "FULL-Update" ?
then you need bootloader=unlockt (Phone unlocked) AND FRP=unlock
if nothing help - dc-unlocker can bootloader unlock (4€) and can FRP unlock (15€)
with HuaweiExtractor extract 3 img - ramdisk.img, recovery_ramdis.img, system.img
the Extractor do automatic 3 *.img.header
this 6 files copy to your ADB-folder, then
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
this work only if "bootloader unlockt" AND "FRP unlock" !!!
if flash work and phone reboot - phone boot to stock-recovery and format low-level "data"
if "... stuck at 5% and fail" : your stock-recovery is bad !
if all work, phone boot: all your data is lost (format low-level "data")
factory reset (with format low-level "data") ONLY work with stock-recovery - NO with TWRP
Example
i have TWRP installed
OTA-Update incommig, this write "undate install now ?", i do "NO - later"
i flash stock-recovery
now install the update
if all work i can new-flash TWRP
and 1 question : what the way you root your phone ?
Same sh-t. But in stupid action i've locked boot also. So i have: locked boot, locked frp, no system files, not working recovery (erecovery did nothing helpful (no online updates, no factory reset)) I have nand backup (but dont have twrp) and i have a wish to drop that all-way-stupid-ideas device from ten floor :c Any ways without pay 15e? Better i will smash it and buy something better for smaller cost
I´m in the same situation, but my frp is not locked. What I do is try to unroot my device flashing magiskuninstaller.zip and unSU.zip and everything seems to be ok but on reboot my phone enter erecovery and do anything, the same thing, dont download latest version and manually update with Update.app and dload stuck at 5%. I tried this:
with HuaweiExtractor extract 3 img - ramdisk.img, recovery_ramdis.img, system.img
the Extractor do automatic 3 *.img.header
this 6 files copy to your ADB-folder, then
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
but on first boot there is a bootloop and the second boot sends to erecovery again
My phone is ANE-LX3 latinoamerica, any help will be appreciated....sorry my bad english
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
This p20 lite frp fix works!
Hi if your needing to bypass the frp lock on your huawei because someone factory reset it and forgot the google id do a Google search on huawei p20 frp bypass, scroll down until you come to mobileheadlines website. They had shortcut maker app download and full instructions on how to bypass it, it worked for me no probs, aslo there is a great video by hard reset ablout frp bypassing on the p20 on you tube. Hope this helps u out dave b...
P20 Pro stuck in bootloop
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
Could this method also work for me? I bought a P20 Pro while in China. Being in Europe I did not receive the OTA to Android Pie and I had still Chinese characters popping up left and right.
So I got an bootloader unlock code.
Then used Funkyhuawei to rebrand the phone. The instructions mentioned I had to do the eRecovery twice. But after the first download it got stuck in a bootloop. I cannot get back into eRecovery.
I did manage to clean the data and do a factory reset, but I did not get back in the the eRecovery mode. Now I am stuck.
Thanks
TJL590 said:
I am in a massive pickle here.
I installed root on my phone but stupidly enough I forgot to FRP unlock my phone. with also phone unlocked
Phone unlocked
FRP lock
My phone now only boots into erecovery and twrp doesn't load on my phone anymore and have tried multiple times to load it up again.
I have factory reset my phone and tried multiple stock roms to install but all get stuck at 5% and fail.
My build number is ANE-LX1 8.0.0.103(C782)
I then went to DC unlocker to remove FRP and came up with their own error code 'unknown error 405'
I am now stuck on what to do as fastboot device works but when i try to flash something all i get is command failed.
Click to expand...
Click to collapse
same i did that lol
extract from update.zip the update.app with HuaweiUpdateExtractor0.9.9.5
and search or try any update file until that works
You have to do it flash fastboot flash system system.img
fastboot flash recovery_ramdisk P20LiteTWRP_3.4.0-0.img
The P20LiteTWRP_3.4.0-0.img is in my Mediafile rar Data
fastboot flash vbmeta vbmeta.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
You forget unlock syntax?
fastboot oem unlock (get here your Code without bracket)
Allert!! The Website:
Global Unlocking Solutions
global-unlocking-solutions.miiduu.com
Is Cheating, you can pay but get nothing.
Complett Unbrick P20 Lite Single SIM
P20 Lite single SIM Recovery
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
MainSource
[Guide] How to install stock firmware & links for ANE-LX1C432 firmwares
Before start changing the firmware you should check first if Huawei release FullOTA for your device. Without full firmware is highly recommend do not mess up with device. Make a full or partial backup with the TWRP [for partial I recommend...
forum.xda-developers.com
P20 lite Single SIM
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2496/g1789/v192822/f1/full/ANE-L01_hw_eu/update_full_ANE-L01_hw_eu.zip
And you need
MainSource From:
[Guide] Switching OEMINFO versions
I've seen a number of posts asking how to switch the oeminfo of your phone - so I decided to make a quick guide. Warning: Use this guide at your own risk. I did this on my own p20 Lite without issue but YMMV. Pre-req's Please ensure that you...
forum.xda-developers.com
oeminfo.img
For P20 Lite Single Sim
oeminfo_C432_SS.zip | by Sykomaniac for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
You need unlock your bootloader before, you have your code not?
Unlock modems, routers and phones with DC-unlocker software
DC-unlocker is universal, fast and easy to use unlocking tool. Supports Huawei, ZTE, Sierra Wireless and other modems, routers and phones.
www.dc-unlocker.com
Open a ticked not a forum thread!
Your phonedate a secred and only for you!
Phone Model Name
Product IMEI or MEID
Product Serial Number
Product ID (unique for our phone name)
Phone Model Name and IMEI/MEID you will find in Phone Menu >>> Settings >>> About Phone
Product IMEI or MEID(Primary IMEI if phone is dual sim)
Product ID(unique for our phone name)and Serial Number you can get it from phone service menu.
To do that enter on a phone keyboard *#*#1357946#*#* That will open service menu with all information.
What android version you have on your device?
What is your region (e.g. C432, C185...) in build number? Single/dual SIM?
without information about your region I can't help you.
Related
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Thanks Flippy for sharing the steps with us.
can i downgrade from Nougat to Marshmallow？
microbai said:
can i downgrade from Nougat to Marshmallow？
Click to expand...
Click to collapse
sorry for the delay, yes you can, just follow the steps.
ayad said:
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Click to expand...
Click to collapse
I followed all of the steps and it says "Flash Failed (Fastboot) PLEASE HELP
Edit: I fixed the problem by simply rebooting it. I didn't think it would be that easy.
SameSame, but L-Version ... cannot find Stock ROM ...
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
pwallenb said:
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
Click to expand...
Click to collapse
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Could someone please help me with downgrading my YB1-X90L, it just refuses to boot at all after my nephews messed with it, I found the stock rom but I can't get some of the needed programs and drivers,
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Hello
I made this all and my Yoga-Book runs on Android 6.0.1 . But is there a possibility to get an Android Build 7.1.1? Because I can't restore my Backup it seams it is corrupt and if I try to update im configuration-app its does anything but at the end its allways on 6.0.1.
It would be great if someone can helb me.
Best regards
Peter
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
phsma said:
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
Click to expand...
Click to collapse
looks like the original link is down, so i searched for the file name YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip and this came up:
YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip | Easy Firmware
easy-firmware.com
ive no idea if this is working or safe to use but its a start.
good luck
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
galumph said:
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
Click to expand...
Click to collapse
I'm in the same boat. I acquired a YB1-X90F but all it does is show the orange Lenovo splash screen, then a black screen.
So here I am reading threads. But I'm already at my first hurdle...since I can't boot into the OS and go into Developer Options to start the boot loader unlock process.
YB1-X90F No OS(?) - Flashing Help
TL;DR: Noob needs to stock flash a device that won't boot into OS. Here's how the recovery looks (without and interaction): Boot loader: Splash screen: I have acquired a YB1-X90F that just shows the orange Lenovo splash screen and or a...
forum.xda-developers.com
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Brent.M said:
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Click to expand...
Click to collapse
any ideea why my yoga book is not visible in fastboot?
i installed drivers and platform lite indicated in drive location.
currently my yoga sbows bootloader error 05 during booting
Thank you @Brent.M I have a booting Yoga Book again
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
The link is not work anymore, could you please share you firmware for x90L model ? thanks
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
I install an service full repair stock via dload
http://androidhost.ru/v5
it is working right now.
oblivion2222 said:
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
Click to expand...
Click to collapse
You can always re-unlock your phones bootloader again, the key is always same, then flash or boot twrp with fastboot.
Some developers says the command for oreo is: fastboot flash recovery_ramdisk [file name] but I used this: fastboot flash recovery_ramdisk_a [file name]
You even can try to just boot twrp without flashing it to your recovery by simple typing: fastboot boot [file name]
If fastboot can flash twrp, turn your phone off then hold volume up/+ and power button same time and hold them until the state of unlocked warning appears.
You can use dload method or you can use HuRupdater method to flash firmware. You'll find introduction for how to do it.
Just search on xda
Hi,
I have a lg G5 H850 stuck into "fastboot for bootloader unlock" mode and recovery or download mode are not working, I tried to recover it by unlocking the bootloader but the OEM unlock option is disabled so I cannot flash anything.(device locked error error message)
I saw a YouTube video yout ube.com/watch?v=ImJ1xXXzV6s with my exact issue but he is not responding to my messages.
Is there any option to unbrick this device?
Thanks a lot in advance to all!
yoanc244 said:
Hi,
I have a lg G5 H850 stuck into "fastboot for bootloader unlock" mode and recovery or download mode are not working, I tried to recover it by unlocking the bootloader but the OEM unlock option is disabled so I cannot flash anything.(device locked error error message)
I saw a YouTube video yout ube.com/watch?v=ImJ1xXXzV6s with my exact issue but he is not responding to my messages.
Is there any option to unbrick this device?
Thanks a lot in advance to all!
Click to expand...
Click to collapse
Same here
happened after using the wrong dd command to get rid of the boot loop
boot loop still there, but phone bricked lol
https://forum.xda-developers.com/showpost.php?p=77833566&postcount=21
Hi guys,
it's been more than two hours that I seek the solution to this same problem with next to me the LG G5 bootllop.
All other solutions give nothing:
- unlook via fastboot makes a mistake because the debugging option is not enabled
- the download mode does not remain more than 15 seconds
Guys, have you found a way out of this problem?
MathFR34 said:
Hi guys,
it's been more than two hours that I seek the solution to this same problem with next to me the LG G5 bootllop.
All other solutions give nothing:
- unlook via fastboot makes a mistake because the debugging option is not enabled
- the download mode does not remain more than 15 seconds
Guys, have you found a way out of this problem?
Click to expand...
Click to collapse
You can try getting the .kdz for your phone (e.g. off lg-firmwares.com), use the WindowsLGFirmwareExtract tool to extract the .dz out of the .kdz, then use the tool to extract the laf_6.bin out of the .dz. You can then flash this in fastboot mode using a command like
Code:
fastboot flash laf laf_6.bin
Make sure to use the same .kdz as your running firmware.
I had the same problem with Download Mode as you (restarted after 15 seconds). I extracted laf_6.bin from the H85030e KDZ firmware (whose boot stack was in use), and flashed its LAF (i.e. Download Mode) volume over the laf partition. After this Download Mode stopped restarting after 15 seconds, and I was able to use LGUP (and you would be able to use UPPERCUT) to flash the full KDZ.
(I proceeded to start the phone in bootloader/fastboot mode and flash TWRP recovery as well, with my unlocked bootloader.)
obs3rv said:
You can try getting the .kdz for your phone (e.g. off lg-firmwares.com), use the WindowsLGFirmwareExtract tool to extract the .dz out of the .kdz, then use the tool to extract the laf_6.bin out of the .dz. You can then flash this in fastboot mode using a command like
Code:
fastboot flash laf laf_6.bin
Make sure to use the same .kdz as your running firmware.
I had the same problem with Download Mode as you (restarted after 15 seconds). I extracted laf_6.bin from the H85030e KDZ firmware (whose boot stack was in use), and flashed its LAF (i.e. Download Mode) volume over the laf partition. After this Download Mode stopped restarting after 15 seconds, and I was able to use LGUP (and you would be able to use UPPERCUT) to flash the full KDZ.
(I proceeded to start the phone in bootloader/fastboot mode and flash TWRP recovery as well, with my unlocked bootloader.)
Click to expand...
Click to collapse
interesting. I am in Bootloop from two weeks. Tried to much time lineage 17.1 and then leave the phone so many hours in order to boot in lineage that at some point it won't enter system anymore.
So I passed to LGUP that works only with UPPERCUT and only with UPGRADE functions even if I installed all the drivers.
Maybe I need a "megalock.dll" file?
But the way one week trying to boot in system after flashing KDZ files with UPPERCUT and after many and many bootloop I finally enter the system with H85020a_00_OPEN_EU_OP_1030.kdz
But after one reboot it returns the problem.
I am desperate.
Have you got a phone name to buy that is unbrickable?
Remember.....
Sp flash tool work (without authorization) with v11.0.4.0-v11.0.8.0......but v11.0.4.0 is best for sp flash tool work without authorized account...
This Post is very important for all redmi 9 users, who Want to modify his or her device At Home Without Going To xaiomi customer center and Pay somebody to fix His Or Her device.
Theory:
Our redmi 9 is MediaTek bAse Device. That's Mean it is easily to break without any reason. When Break your device you cannot go fastboot mode or recovery mood.Only boot logo is coming and then it reboot every time. Then The only option is left that is you can or must be flash it with SP flash tool. The SP flash tool flash device with Brom Mood.It is same as Snapdragon EDL mode. Unlik Snapdragon You do not need to disassemble your device to go Brom Mood.The Mood is always there when you reboot your device.If you connect your device With If your PC have Vcom port driver(can be download from this post) Then the computer Can recognise Your device As Vcom Port.But you cannot use this port to flash device Xiaomi Is lock the port. But good News is global V11.0.4.0 has some bug.You can use SP flash tool to flash. An upper Version it may possible But doesn't Know When they fix This Bug And SP flash tool is unable to flash lT.So you have to stay on V11.0.4.0. if You Are in higher version When You Read The Post Do Not Worry You Can Downgrade V11.0.4.0 . test All Framware At This Time of Writting The Post ,That The AntirollBack Protection Is Not Active.That's Mean You Can Downgrade Your Framwar.
How To Unbrick Your Device?:
If You Are In V11.0.4.0 then It Work Definitely Unless You Flash Wrong Preloader.Bin Or Earse Preloader.bin .intall Vcom Driver To Your Pc(DownloaD From Post).If Your Device Can Defect As Vcom Driver Then You Good TO Go....
Follow The Below Link To Flash With Sp Flash Tool.Remember Do Not Flaah Preloader.Bin File....
Redmi 9 brick problem solution.
1.if you are above v11.0.8.0 then go and follow below link... https://forum.xda-developers.com/t/disable-authorization-and-unbrick-your-redmi-9.4228213/ ================================== 2.Else follow it...
forum.xda-developers.com
How To UpdaTe Your Device Without UpdaTe The Framware?:
It is very good and important question. Because If you update your Device With Recovy Method With Recovery Rom Then Your Framware Is Also Update.So It Is Not Possible To Use Sp Flash Tool Then.To Avoid This Problen You Can Follow Two Method Which I Describe Below.....
1.Fastboot Rom Method(Easy):
You Have to download the fastboot version Of your ROM which You Want To Install.Then extract The Fastboot Rom And You Need super.img and boot.img File.You Also Need A vbmeta.Img(Download From This Post). Then Go to fastboot mode Of your device and Flash Via Below Cmd
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
Erase your all user data from Going To Recovery Mood(power+Volume Down).Reboot Your Device If Get Bootloop Then Flash Magisk Patch Boot.Img From The Fastboot Rom.If you Do Not Know How To Patch Then Follow The Below Link..
Root Redmi 9 without twrp and data lost
VERY IMPORTANT: Please make sure your boot.img version matches the ROM version . that's mean if you update your device then you have to use patch boot.img from new recovery rom.never use the old one. If they mismatch you might brick your phone...
forum.xda-developers.com
In This Way You Can Flash Any Variant of FastbOot Rom.That's Mean You Can Use Chaina Rom With GlobAl Framware..
2.RecOvery Method(Hard)
Requirements:
*Recovery Rom(any Version And Any Variant)
*Pc Or Laptop With Windows And Linux(Ubuntu 20.4 is Batter)
*Some Knowledge About Ubuntu Cmd.
Linux part
Extract 4 file From The Downloaded Recovery Rom
1.system.new.dat.br
2.system.transfer.list
3.product.new.dat.br
4.product.transfer.list
And Download sdat2img.py(from This Post extract from dat2img-master.zip)
Keep This 5 file In Same Folder And Ooen A Terminal From The Same Location.run The Below Cmb In Linux Environment One By One.
brotli -d system.new.dat.br
brotli -d product.new.dat.br
./sdat2img.py system.transfer.list system.new.dat system.img
./sdat2img.py product.transfer.list product.new.dat product.img
After Run All 4 cmd Successful Then You Can Find Two File In Same Folder Which Are system.img And .product.img
Linux Part Is End Now Go To Window Os...
now Go To Your Device fastboot MooD And Connect Your Device With Pc And Run Below Cmd
fastboot reboot fastboot (For Going To Fastbootd Mood)
When You Go To Fastbootd Mood Then Open Cmd From Where Your CreateEd File Is And Run Below Cmd
fastboot flash system system.img
fastboot flash product product.Img
fastboot -w
fastboot reboot
Do Not Forget To Flash vbmeta(From This Post).flash vbmeta With fastboot Mood And When You Flash system and Product Then You Must Get A Error Like"Invalid spare At Header Magic" do Not Panic It Is Simple....
Extra:
if You Want To Use vendor.img Then you Can Also Extract vendor.img With The Above Method.and Can Flash It Via fastbootd Moid.If You Flash Vendor.img Then Do Not Forget Fo Flash boot.img From The Recovery Rom.flash boot.img with fastboot mood
If this post helpful them do not forget to thank me.Need lots time to make this post.if any questions then feel free to ask..
i had tested Recovery(Corrupted), after Reboot, i cant able to fastboot mode and Recovery mode
then i Flashed Via SP Flash Tool (With Preloader)
(((((i dont know about Preloader before Flash)))))
now device is dead, sp Flash tool not detects it error with code : Error status brom cmd fail (0xc0060005)
(Before this thread we have flashed still now there is no solution)
((3 Pleople are flashed, including me))
my device at service centre, They told that need to change motherboard,
not only me those 2 people also get same answer from service centre {need to change motherboard}
Preloader File can able to kill motherboard????
Any Solution to already Flashed Preloader devices (Redmi 9 Lancelot ) ????????
Mantipallykrishna said:
i had tested Recovery(Corrupted), after Reboot, i cant able to fastboot mode and Recovery mode
then i Flashed Via SP Flash Tool (With Preloader)
(((((i dont know about Preloader before Flash)))))
now device is dead, sp Flash tool not detects it error with code : Error status brom cmd fail (0xc0060005)
(Before this thread we have flashed still now there is no solution)
((3 Pleople are flashed, including me))
my device at service centre, They told that need to change motherboard,
not only me those 2 people also get same answer from service centre {need to change motherboard}
Preloader File can able to kill motherboard????
Any Solution to already Flashed Preloader devices (Redmi 9 Lancelot ) ????????
Click to expand...
Click to collapse
No need to replace motherboard....go xaiomi service shop and tell them what you done with your device and ask them if they hava authorization account...if they have them tell them to use it to fix your device...
there's no way to bring it back to life except using authorized mi account for flashing. in this state phone doesn't show preloader drivers when its connected to PC or laptop, it shows mtk port instead preloader
Haidershah907 said:
there's no way to bring it back to life except using authorized mi account for flashing. in this state phone doesn't show preloader drivers when its connected to PC or laptop, it shows mtk port instead preloader
Click to expand...
Click to collapse
Sp flash tool work (without authorization) with v11.0.4.0-v11.0.8.0......but v11.0.4.0 is best for sp flash tool work without authorized account...
please help me , Please help me, bootloader unlock for redmi 9 using other way not seem by using sim data ,because this way not work in country of Yemen , because sim data is very slow i will not registrate account Xiaomi and no service center in Yemen.
help my please.
other way to redmi 9 fastboot rom flash without unlock bootloader
send your solve to my gmail : [email protected]
neshwanalamery said:
please help me , Please help me, bootloader unlock for redmi 9 using other way not seem by using sim data ,because this way not work in country of Yemen , because sim data is very slow i will not registrate account Xiaomi and no service center in Yemen.
help my please.
other way to redmi 9 fastboot rom flash without unlock bootloader
send your solve to my gmail : [email protected]
Click to expand...
Click to collapse
Need registration is only way...use other sim card
Hello there,
I managed to unlock the bootloader and the FRP for the Huawei P20 Lite ANE-LX1 (which was on emui 9)
Then I flashed Twrp-3.5.2_9-0.
It worked fine for a while. But when I tired "Wipe data", it got stuck with "Formating f2fs, Done" for 1hour.
So I rebooted the device with volume down + power.
When I try to get back in TWRP, it's getting stuck at the logo and there is also no access to eRecovry, it says "booting now" undefinitely.
And of course no access to the stock rom which says the same thing "booting now" undefinitely.
I also tried fastboot erase system.
I still have acces to the fastboot mode with bootloader unlock + FRP unlock.
Is there a way to unbrick the device?
Let me know if you need any additional info.
Thank you in advance.
Pi0312 said:
Then I flashed Twrp-3.5.2_9-0.
Click to expand...
Click to collapse
Pi0312 said:
But when I tired "Wipe data",
Click to expand...
Click to collapse
never do 'format data' in TWRP 3.4.0 and above running stock firmware, it may really brick your phone.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot getvar vendorcountry
and post results.
Do you have bootloader unlock code?
Thanks for the info about "wipe data"
Yes, I have the bootloader unlock code.
here are the results:
ANE-LX1 9.1.0.381 (C432E7R1P7)
vendorcountry: hw/eu
Pi0312 said:
Thanks for the info about "wipe data"
Yes, I have the bootloader unlock code.
here are the results:
ANE-LX1 9.1.0.381 (C432E7R1P7)
vendorcountry: hw/eu
Click to expand...
Click to collapse
Download and install Service ROM using dload method (instructions can be found in ReleaseDoc folder). This process will erase all your data and lock the BL again.
P.S.: https://forum.xda-developers.com/t/recommended-and-tested-twrp-recovery.4199099/
First flash stock recovery with fastboot https://mega.nz/file/M0FHlYhb#4yWz8Onr3D1NATel4mZSK4SNdd5B3p6dnPg6oXPGWl8
command:
fastboot flash recovery_ramdisk RECOVERY_RAMDISK-9.1.img
Thanks.
I went to the link for download the Service ROM but...
Am I missing something or the .rar file is locked with a password and one must pay for it?
Pi0312 said:
Thanks.
I went to the link for download the Service ROM but...
Am I missing something or the .rar file is locked with a password and one must pay for it?
Click to expand...
Click to collapse
No , sorry, try another links
https://androidhost.ru/1O2r
https://androidhost.ru/Y0n
Those links are for nova 3e, does it work also for ANE-LX1?
Pi0312 said:
Those links are for nova 3e, does it work also for ANE-LX1?
Click to expand...
Click to collapse
I'm not an idiot bro ....
sorry, that's not what I meant.
I'm new to this kind of things.
thank you again.
I'll try it tomorrow and report back.
Cheers
I'm in the exact same soup (and additionally flashed the phenix kernel). How exactly does one do the dload method without dialpad?
I tried:
flash twrp, got stuck on the twrp logo where ADB works, so pushed UPDATE.APP to /sdcard/dload/UPDATE.APP and tried booting while holding both volume keys and power. No luck, boots back to TWRP and stuck on logo.
Flashed stock recovery over recovery_ramdisk and tried again. No luck and stuck on "Your device is booting now..."
both of the above but with an external SD card and instead of /dload/UPDATE.APP I just copied the whole dload directory from the stock service ROM
Nothing seems to work and now I would kindly ask for help - what should I do?
MrPipa said:
How exactly does one do the dload method without dialpad?
Click to expand...
Click to collapse
-Alf- said:
instructions can be found in ReleaseDoc folder
Click to expand...
Click to collapse
Btw, what is your build number?
Try flashing a treble system image.
Release AOSP 11.0 v312 · phhusson/treble_experimentations
VoLTE on Mediatek R vendors Under-display fingerprint comeback. Partial support on OnePlus Nord2. Double-tap to wake on OnePlus Nord2 Fix fingerprint support on some OPPO/OP devices Fix securize wh...
github.com
Click assets then select the 'arm64 vanilla' build.
Extract the .xz file once and rename it system.img.
Put it into the folder that contains fastboot .
Then download this vbmeta.img and put it into the fastboot folder.
https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
Then execute, in fastboot:
fastboot -w
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot flash system system.img
fastboot reboot
Got it!
I found an old message by @-Alf- where he suggested to use Huawei Update Extractor to extract system, kernel and recovery_ramdisk images from the stock service ROM and flash them manually with fastboot. This works! Or at least the stock rom and erecovery seems to boot fine.
Thank you both @-Alf- and @LR7875 ! These forums can be confusing, I'm used to Nexus 6P where there is plenty ROMs available and no issues with TWRP etc. I will now go for my second attempt to get LOS 18 to work (with magisk )
Btw the build number is ANE-LX1 9.1.0.381(C432E7R1P7) (hw/eu edition, same as OP)
Oright, I'm back in the game.
Thank you -Alf-, LR7875 and MrPipa
I too didn't manage to make the dload method work.
So I also followed Alf's suggestion to use Huawei Update Extractor.
Here is a recap for other noobs like me:
My device is:
Huawei P20 lite
Build: ANE-LX1 9.1.0.381 (C432E7R1P7)
vendorcountry: hw/eu
1. Download huawei update extractor here:
http://forum.xda-developers.com/attachment.php?attachmentid=3966156
(from this thread: https://forum.xda-developers.com/t/...updated-v0-9-9-5-open-source-library.2433454/)
2. Download Stock ROM from here: https://androidhost.ru/1O2r
(Thanks to -Alf-)
3. In windows, unzip HuaweiUpdateExtractor_0.9.9.5.zip
4. Unzip "Huawei P20 Lite ( Nova 3e )... .zip"
5. Unzip the update_sd.zip file contained in the folder path /Huawei P20 Lite ( Nova 3e ).../Software/dload/update_sd
5. Launch HuaweiUpdateExtractor.exe
6. Go in the tab settings and uncheck all boxes
7. Back to the first tab, leave the drop down field to "unknown ..."
8. Click on the 3 dots on the right side and select the file UPDATE.APP in the newly unzipped folder update_sd
9. HuaweiUpdateExtractor will show all the .img files contained in the UPDATE.APP file
10. Extract all to a folder (i.e. update-imgs) with right click on any img file and select extract all
11. Put the device in fastboot mode and start flashing .img files (see below)
(from this thread: https://forum.xda-developers.com/t/huawei-p20-lite-bricked.3798842/)
Plug in usb cable into the pc and the device, boot the device into fastboot by pressing and holding Volume Down and power buttons, hold it until it boot into fastboot
Android icon with 2 red lines under it: bootloader unlock and FRP unlock
Then open a terminal or command line in the folder containing all the images i.e. update-imgs
and use these commands:
Code:
fastboot flash cust CUST.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash recovery_vbmeta RECOVERY_VBMETA.img
fastboot flash recovery_vendor RECOVERY_VENDOR.img
fastboot flash system SYSTEM.img
fastboot flash vbmeta VBMETA.img
I'm not sure if they are all necessary but I tried a few of them (system, recovery_ramdis, ramdisk)
and it didn't seem to work.
Only after doing the rest of them, it worked.
Meaning the device could boot into stock rom.
12. Reboot the device after the last command with:
Code:
fastboot reboot
Now back to normal.
After that I got LineageOS 16 on the device with these steps:
1. Download a TWRP, I used this one: https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
(Thanks to -Alf-, from this thread: https://forum.xda-developers.com/t/recommended-and-tested-twrp-recovery.4199099/)
2. Downlaod LineageOS 16 from here: https://lineageosroms.com/anne/
3. Copy the LineageOS 16 image to device's SD card.
4. Connect the device to a pc via USB cable, put the device in fastboot mode (Volume DOWN + Power buttons until the android icon appears)
then use this command line from the folder containing the TWRP image file (i.e. TWRP-oreo-smart.img):
Code:
fastboot flash recovery_ramdisk TWRP-oreo-smart.img
and reboot with:
Code:
fastboot reboot
5. To get into TWRP, unplug the USB cable and go into recovery mode by pressing and holding Volume UP + Power buttons until Huawei logo appears.
6. In TWRP:
(Again thanks -Alf-, from this thread: https://forum.xda-developers.com/t/rom-official-anne-9-lineageos-16-0.4151163/page-3#post-83601729)
6.a: go to Wipe > Format data, go back to TWRP's main menu
6.b: Wipe > Advanced Wipe > Wipe Dalvik, Cache, Data, System, Internal storage > Swipe to wipe and go back to the TWRP's main menu
6.c: Install > navigate to LineageOS 16's .img file and swipe to install LineageOS
6.d: Back to TWRP's main menu, select Reboot > Reboot recovery > perform factory reset
That part didn't work for me, it kept booting into TWRP.
So I had to get into eRecovery from TWRP, I unplugged the USB cable.
And then pressed Volume UP + Power buttons until the phone rebooted and the Huawei logo appeared.
At the Huawei logo, I released the buttons and the device booted into eRecovery.
Then I could do a factory reset by following the onscreen instructions.
Done, the device reboots and after the Huawei logo appears the LineageOS animation.
Enjoy and again thank you -Alf-, LR7875 and MrPipa
Edit: Added flashing CUST.img as per -Alf- suggestion
Edit: Added remove the USB cable to boot into eRecovery
Pi0312 said:
Done
Click to expand...
Click to collapse
Super, congrats!
P.S.: if I may add something - often it is important to flash CUST.img partition.
Pi0312 said:
6.d: Back to TWRP's main menu, select Reboot > Reboot recovery > perform factory reset
That part didn't work for me, so I had to get into eRecovery from outside TWRP by pressing Volume UP + Power buttons until eRecovery appeared
then I could do a factory reset by following the onscreen instructions.
Click to expand...
Click to collapse
Hello guys, I tried to follow these steps since i also 'bricked' my p20 lite and it worked pretty fine up until the quoted point. When I tap the factory reset the phone instantly shuts of and reboots into twrp. Any idea what could cause this?
My device is:
Huawei P20 lite
Build: ANE-LX1 9.1.0.132(C432E7R1P7)
vendorcountry: hw/eu
Since I have this build I flashed the kernel, system, recovery_ramdisk etc. with .132 build .zip, (rest of the steps were exactly the same), should I have used the .zip @-Alf- provided?
Hello LIFATRON3000,
I've tried a few build as well and they worked fine. So my guess is that the issue might not be the build.
I find that when the phone is connected to a usb cable, it keeps booting into twrp when I try to get into eRecovery.
So when in trwp, unplug the usb cable and then press Volume UP + Power button.
It should reboot the phone then you'll see the Huawei logo again. Which is when you should release the buttons.
A new screen appears after Huawei that says a few things with a yellow URL and "booting now..." in white, instead of the regular similar screen but with 3 yellow options like: press up for 3 sec or power to boot or if you do nothing it will boot by itself.
And it's after that, that eRecovery is hidden.
Have you tried that already? Unpluging the USB cable and tried to Volume UP + power button?
In Huawei devices there are two Recovery , Recovery and eRecovery, each has different functions.
How to enter Recovery on EMUI 9.1: you need to turn off the phone (unlike EMUI 8) and press and hold Power + Vol Up.
If your Recovery is patched by Magisk, use this Guide
How to enter eRecovery -
1. Locked phone -on E 9.1 - turn off, connect your phone to charger or PC, then press and hold Power +
Vol Up.
2.Unlocked phone - restart your phone, when the yellow warning appears on the screen, press and hold Vol Up for 3 sec. If you have TWRP installed instead of eRecovery, you can use this to enter TWRP.
Recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eRecovery:
Pi0312 said:
And it's after that, that eRecovery is hidden.
Click to expand...
Click to collapse
????
Thank you @-Alf-
It's good to know. I didn't know that there were 2 of them.
I thought there was only eRecovery. So far I only saw the second screen shot but not the first one.
Regarding the "And it's after that, that eRecovery is hidden."
What I mean is when the phone is unplugged and either turned off or inside of TWRP, if I press Volume UP + power button, I get this screen:
and it's ONLY after that screen that I get into eRecovery.
If I get this screen:
and press Volume UP for 3 seconds as indicated in the yellow text, I don't get in eRecovery. Instead I get back inside of TWRP.
Not sure if it's how it's supposed to be but that's what I got so far.