problem after flashing alcatel pixi 3 help needed - Android Q&A, Help & Troubleshooting

hello
i have alcatel one touch pixi 3 and it was closing every app automatically so i flashed a rom using sp flashtool but it showed flashing fail and since then the tablet died and it doesn't turn on no matter how much i try . it wont even recognized by my laptop am afraid its hard bricked so any help or advice is appreciated

jasonHamsher said:
hello
i have alcatel one touch pixi 3 and it was closing every app automatically so i flashed a rom using sp flashtool but it showed flashing fail and since then the tablet died and it doesn't turn on no matter how much i try . it wont even recognized by my laptop am afraid its hard bricked so any help or advice is appreciated
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3193624
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Related

Doogee Y6 Piano Black not switching on after firmware reload

hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
charled said:
hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for you. Don't be afraid to ask for some member guidance on them either.
https://forum.xda-developers.com/showthread.php?t=3480459
https://forum.xda-developers.com/showthread.php?t=3509692
https://forum.xda-developers.com/showthread.php?t=3487594
Just an FYI on a few leads to help you get some guidance from a member with the same/similar device.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Fixed
charled said:
hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
Click to expand...
Click to collapse
Managed to load the custom rom. found that on windows 10 it failed to load with splashtools. tried on my win7 machine and it worked. phone up and running.
do any of you know if there's a stock rom with android 7 for the doogee y6 piano black. would like to try it out.:good:
charled said:
do any of you know if there's a stock rom with android 7 for the doogee y6 piano black. would like to try it out.:good:
Click to expand...
Click to collapse
As I had stated, I don't have this device but, your best bet is to ask this question within one of the following threads for some member guidance.
https://forum.xda-developers.com/showthread.php?t=3480459
https://forum.xda-developers.com/showthread.php?t=3487594
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

No recovery in my htc desire 600(606w) dual sim

Guys , i want to use my fav htc desire 600 back.before this my phone blackout and cant be uae.Then i flash it with custom rom thru the stock recovery.now it happened again but this time the stock recovery had gone.the phone had been rooted.i tried to install the cwm recovery and twrp but it always stuck at htc logo while showing “entering recovery”.what did i miss? It would be helpfull if you guys help me?
Ijat95 said:
Guys , i want to use my fav htc desire 600 back.before this my phone blackout and cant be uae.Then i flash it with custom rom thru the stock recovery.now it happened again but this time the stock recovery had gone.the phone had been rooted.i tried to install the cwm recovery and twrp but it always stuck at htc logo while showing “entering recovery”.what did i miss? It would be helpfull if you guys help me?
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following Q&A thread that's specific for the HTC Desire.
https://forum.xda-developers.com/showthread.php?t=1275632
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Wow so many there..thanks

a qualcomm phone hard bricked, flashed through qfil success still won't boot up

hey developers. i need some expert advice about my phone, my phone is of lenovo model no. x3a40 (lenovo vibe x3). It got hard bricked last week, so i try to flash the stock rom using qfil and it flashed successfully still the phone won't boot up. Their are 3 stock rom versions, i tried them all but the phone won't boot up. i pressed the power button for atleast 1 hour or may be more still it wont boot. i checked the motherboard, no problem in that, remove and reconnect the battery supply, still no success.
so now for last resort i want some help about this issue, if any dev faced this problem and know the solution then please help me. i really need this device. :crying::crying:
tarun yadvendu said:
hey developers. i need some expert advice about my phone, my phone is of lenovo model no. x3a40 (lenovo vibe x3)...
Click to expand...
Click to collapse
I don't have this device but, I believe that the following, device specific, thread may be helpful for what you are looking for and don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3328461
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, I believe that the following, device specific, thread may be helpful for what you are looking for and don't be afraid to ask for some member guidance within it too.
https://forum.xda-developers.com/showthread.php?t=3328461
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
i am already active in that thread, and asked there but noone knows the solution. That's why i am asking from other devs. i can't find the solution for this problem. Thanks for your help
tarun yadvendu said:
hey developers. i need some expert advice about my phone, my phone is of lenovo model no. x3a40 (lenovo vibe x3). It got hard bricked last week, so i try to flash the stock rom using qfil and it flashed successfully still the phone won't boot up. Their are 3 stock rom versions, i tried them all but the phone won't boot up. i pressed the power button for atleast 1 hour or may be more still it wont boot. i checked the motherboard, no problem in that, remove and reconnect the battery supply, still no success.
so now for last resort i want some help about this issue, if any dev faced this problem and know the solution then please help me. i really need this device. :crying::crying:
Click to expand...
Click to collapse
i too had same problem did your get back to life or not?????
i have same problem, hope god send prophet to answer in this forum
sunilkjt said:
i too had same problem did your get back to life or not?????
Click to expand...
Click to collapse
were you able to fix this issue

Help with my ZTE Blade A520!!!

Hello, i need help, i buy a ZTE Blade A520 in China, i try install a custom rom with SP Flash Tool, y found the custom rom in needrom.com but when finish the process my phone does not turn on the screen, the phone vibrates as if it turned on but never raises image, the screen is completely dark, guys you can help me, this is the features of my phone, thanks
Device Model: ZTE BA520
CPU: MT6737
Company: China Mobile
alejulian9119 said:
Hello, i need help, i buy a ZTE Blade A520 in China, i try install a custom rom with SP Flash Tool,.....
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within one of the following threads that's specific to your device/Mediatek Chipset.
https://forum.xda-developers.com/showthread.php?t=1600756
https://forum.xda-developers.com/showthread.php?t=3160802
https://forum.xda-developers.com/showthread.php?t=3506775
https://forum.xda-developers.com/showthread.php?t=2707438
https://forum.xda-developers.com/showthread.php?t=2895514
https://forum.xda-developers.com/showthread.php?t=2701283
https://forum.xda-developers.com/showthread.php?t=3547416
There's a few others but, I believe that these should give you a good start...
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
thanks for your help, but it seems that the problem is with the ROM that I installed, because the phone is on but the screen completely black, I need to find a custom ROM that works well with this phone model, thanks anyway

[wiko][l5510]bootloop

Hello guys!
today my wiko ridge 4g got bricked.
i tried qfil,qcomdloader to install stock rom in my phone, qcomdloader stuck to 1% forever while qfil flashes but no boot.
someone pls help me my phone is stuck on wiko logo and is able to boot into download mode.
qfil also shows something like (PROGRAM:READ BACK VERIFY FAILED ON SECTOR xxxxxxx )
can someone tell me what problem exactly is? and whats the solution..
Thanks
Rockstar dev said:
Hello guys! today my wiko ridge 4g got bricked..........
Click to expand...
Click to collapse
I don't have this device but, your best bet is to take a look at and post your question within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3602498
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

Categories

Resources