Hello, XDA-Members,
long story short, I tried to flash CM-13 on my Honor 5X(KIW-L21 B340). Well, that didn't work and the phone always booted into TWRP. So I flashed FlymeOS because I couldn't flash the stock rom anymore(No matter why.).
It worked perfectly, and I were able to use my phone. After restarting my phone it booted back into TWRP, tried to wipe and all that stuff and even re-flashed Flyme OS, but still booted into TWRP. I was so UPSET that I deciced to flash the original RECOVERY.img for my Honor 5X. Well and from there I made it worse.
Windows and Linux don't recognize my phone. Windows just shows an empty E:\ drive. Reinstalled Google USB drivers, reinstalled driver etc. Didn't work. Now, when I start my phone it boots into the honor 5x recovery. I got these options available:
- Reboot system now
- Wipe data/factory reset
- Wipe cache partition
So, well. I can't install a rom anymore. As well when trying to connect my phone to ADB it won't work either. ADB doesn't recognize my phone. I made a big bull****, tbh. Installed HI-Care as well, but it doesn't get recognized either. I can also boot into Huawei eRecovery, connect to my wifi because it says it can download the stock rom. Guess what, it always said failed so I'm not able to do this either.
I'm really stuck. Anybody got an idea? Thanks in advance!
dunios said:
Hello, XDA-Members,
long story short, I tried to flash CM-13 on my Honor 5X(KIW-L21 B340). Well, that didn't work and the phone always booted into TWRP. So I flashed FlymeOS because I couldn't flash the stock rom anymore(No matter why.).
It worked perfectly, and I were able to use my phone. After restarting my phone it booted back into TWRP, tried to wipe and all that stuff and even re-flashed Flyme OS, but still booted into TWRP. I was so UPSET that I deciced to flash the original RECOVERY.img for my Honor 5X. Well and from there I made it worse.
Windows and Linux don't recognize my phone. Windows just shows an empty E:\ drive. Reinstalled Google USB drivers, reinstalled driver etc. Didn't work. Now, when I start my phone it boots into the honor 5x recovery. I got these options available:
- Reboot system now
- Wipe data/factory reset
- Wipe cache partition
So, well. I can't install a rom anymore. As well when trying to connect my phone to ADB it won't work either. ADB doesn't recognize my phone. I made a big bull****, tbh. Installed HI-Care as well, but it doesn't get recognized either. I can also boot into Huawei eRecovery, connect to my wifi because it says it can download the stock rom. Guess what, it always said failed so I'm not able to do this either.
I'm really stuck. Anybody got an idea? Thanks in advance!
Click to expand...
Click to collapse
Shut down the phone
plug the phone into your windows PC
hold volume down + power to enter the bootloader
from windows open the command prompt - type fastboot devices hit enter (your phone serial number will display)
type fastboot flash recovery TWRP.img (be sure to use this TWRP and it's named TWRP.img and in the same folder as fastboot)
after the file is flashed successfully hold power + volume up + volume down
after 5 seconds let go of power and continue to hold the volume buttons until TWRP boots
From TWRP you can now copy the CM13.zip and Gapps.zip to your phone and wipe/factory reset - then install them one by one
be sure their are no errors .. if you see errors choose reboot recovery and try the flash again until it succeeds.
first boot of cm13 will take some time, be patient
Thanks,
I recovered my phone. Awesome!
So, this is my problem: I was using for months now CM13 and TWRP3.0 by EdwinMoq, but the phone suddenly started to drain battery abnormally, I read CM13 was the cause so I installed TWRP 2.7.1.1 to flash Paranoid Android 4.6 BETA. When I wiped partitions to install PA (using TWRP 2.7.1.1), somehow SD Card files were deleted (I didn't select wipe SD Card at any point so I don't know what happened). Then powered off to copy the flashable *.zip again on the SD Card and when I tried to boot recovery, LG Logo appeared but after few seconds phone shutted down (and this happens everytime).
It is a p768 with unlocked bootloader. I can use fastboot just fine, delete partitions, flash them, but I obviously can't flash a system.img via fastboot (it's too big). And I tried flashing different recovery files (TWRP, CWM) and it's exactly the same. I can boot into "S/W Upgrade Mode" too, but when I try to flash any kdz it gets stuck at 15% saying phone is not connected. I tried using another USB port and making Windows install drivers for the device again with no luck.
Drivers are installed correctly (4.0.4 version) and I see phone in the Modems, Ports and USB controllers sections of Device Manager everytime so I don't know what to do. Fastboot is the only thing that's working and I know /system is missing but I can't flash anything.
My issue is kind of like this one BUT, I can boot into S/W Upgrade.
Nevermind, after some quiet crying over the phone I found that my buttons are screwed. I wasn't pressing VolUp right, tricky button. I feel like a retard.
[At first, I have a Huawei p9 Lite] I recently was stuck in reboot mode, my phone would not boot up anymore and just keep rebooting so I went into twrp and did a factory reset without having a backup because I did not have any important files on my mobile. I then still could not boot up so I accidently wiped the whole cache and deleted my OS, so now my phone won't even boot anymore and it's stuck in the "Your device has been unlocked and can't be trusted" screen. How do I make my phone work again? I don't know anything about how to download stuff on my phone when I only have twrp left so I can install it with twrp and then boot again.
EDIT adb push doesn't work either and I can't wipe because it always gives me a red error line in twrp "Failed to mount '/cache' (opperation not supported on transport endpoint)
cxybah said:
[At first, I have a Huawei p9 Lite] I recently was stuck in reboot mode, my phone would not boot up anymore and just keep rebooting so I went into twrp and did a factory reset without having a backup because I did not have any important files on my mobile. I then still could not boot up so I accidently wiped the whole cache and deleted my OS, so now my phone won't even boot anymore and it's stuck in the "Your device has been unlocked and can't be trusted" screen. How do I make my phone work again? I don't know anything about how to download stuff on my phone when I only have twrp left so I can install it with twrp and then boot again.
Click to expand...
Click to collapse
OK so, whenever I try to adb sideload a rom from my pc to my mobile and I go to adb sideload in twrp and swipe it disconnects from my pc and I hear a de de de sounds
That device has an sdcard slot, so just move your desired rom over to that and flash it.
Also, may I ask what rom you had? Lineage os is available for your device (not sure, but if someone compiled twrp, sources are available which means that you can compile it for your device)
Good evening XDA Developers Forum,
I am trying to figure out how to install LineageOS 14.1 on a Huawei Honor 5X without getting into too much hassle. (If you are not interested in my chit-chat, I recommend reading only the bold text.)
Why do I need help? I tried to install LineageOS 14.1 right after buying a fresh new Honor 5X following the instructions at the LineageOS-Wiki*, but things didn't went as expected. After 5 days of macgyvering the (suspectedly) bricked phone I managed to get it running again, but not yet with LinageOS. So I wanted to share my experiences to help others having similar problems and I want to avoid too much stress with the next steps. (* I wanted to link to the Wiki, but due to being a new user, I am not allowed to. You may follow the kiwi-Install-Instructions in the LineageOS-Wiki.)
Kind of disclaimer: I've modified my mobile devices a few times in the past years. I rooted and installed CyanogenMod 12.1 and later an XDA-Dev-built Android 7.1.2 on a Nexus 7 3G 2012. I rooted and installed CyanogenMod 12.1 and later 13.0 on a Nexus 5. I stumbled over some problems, but after some trial and error everything worked. Therefore I thought I was a bit experienced and could easily do that stuff with a phone that is listed as "supported"... I didn't ignore mandatory steps of the LineageOS Wiki. I did RTFM and read this forum. I often found questions being close to my problems, but sometimes I didn't understand the answer or often the answers didn't work for me. I hated to see how this forum tried to help new users that didn't reply on questions and how some new users neither followed the instructions nor posted their solution. I promise not to let the thread die before I summarize a solution. As soon as I'm allowed to, I'll link all the files I used to their source, I kept track of them all.
You may skip the history passage if you're not interested in the pre-story or if you don't want to profit of my trial and error experience. So here comes what I did until today:
Update Google USB drivers, already have adb and fastboot installed
Buy a new Huawei Honor 5X
Check its attributes: It's a KIW-L21 with a Huawei version of Android installed, version 5.1.1 and EMUI 3.1. This device is called "kiwi".
Successfully receive unlock code via Huawei
Root the phone via fastboot, until the fastboot & rescue mode screen says "OEM Unlocked, FRP Unlocked"
Flash TWRP 3.1.1.0 (kiwi) to recovery
Push lineage-14.1-20170809-nightly-kiwi-signed.zip to /sdcard on the phone
Wipe cache, system and data
Start install of the above LineageOS .zip file in TWRP
Installation getting aborted with "assert failed: kiwi.verify_trustzone(...) ==1" and ending with an "Error 7"
Learn from the forums that I should have installed "stock MM" first. "MM" seems to be Marshmallow, also known as Android 6.0
Search for images of "stock MM", end with a complete mess of gigabytes of dozens of images, differing by region (Arab/Europe/Americas/etc.), build numbers, firmware stuff, model numbers... oh crap, I don't understand a word
Extract different "stock recoverys" from multiple firmware packages, try to combine them with all kinds of firmwares
Flash stock recovery "recovery_l21_b130.img" to recovery, put SD card with /dload/UPDATE.APP (KIW-L21C432B130CUSTC432D005.dload.modaco.zip) into phone, reboot with Volume-up + power button, start factory reset, end with "data and cache format failed"
Flash stock recovery "recovery_l21_b130.img" to recovery, put SD card with /dload/UPDATE.APP (08_Huawei_KIW-L21_Firmware_C432B130CUSTC432D005_Android 5.1_EMUI 3.1_Finland.zip) into phone, reboot with Volume-up + power button, start factory reset, end with "data and cache format failed"
Flash stock recovery "RECOVERY.img" (from Extracted_L21_B130.zip) to recovery, put SD card with /dload/UPDATE.APP (08_Huawei_KIW-L21_Firmware_C432B130CUSTC432D005_Android 5.1_EMUI 3.1_Finland.zip) into phone, reboot with Volume-up + power button, start factory reset, end with "data and cache format failed"
All of the issues resulted in a boot loop
Wife getting mad because I bricked her new phone and wasted nights for it
Finally find this nice file depot of the Honor 5X in this forum but do not understand all the different headers or the structure of the list
Find out that the used firmware versions may have been too old (although I thought I should have used "stock" and therefore the oldest ones)
Try my luck with flashing L21_B130\RECOVERY.img (from Extracted_L21_B130.zip) to recovery, used "KIW-L21 C432B350 - D003" from the file depot to copy its UPDATE.APP to /dload/ at the external SD card, held both volume buttons and the power button until reboot
The Honor reboots into an autorecovery mode, installing the file from UPDATE.APP automatically and for the first time not cancelling the process
Great success!
I feel myself like I "unbricked" the phone
I am now holding a running Huawei-crippled Android 6.0.1 in my hands
My current situation is a running Huawei Honor 5X with a Huawei-branded Android 6.0.1, EMUI 4.0, build KIW-L21C432B350, custom version CUSTC432D003, fastboot & rescue mode screen saying "PHONE Unlocked". Unfortunately – you may have noticed – that is not LineageOS 14.1, which I actually wanted to install. How do I do that? Should I just follow the wiki instructions? Do I now have a "stock MM installed"? Doesn't it become uninstalled when I wipe system in TWRP before I install LineageOS?
When I try to read information of the phone via "fastboot getvar all", I just get an empty value after "all:". Why is that?
Rather than struggling over anything else when I try to follow the LineageOS wiki install guide again: What should I do or check first? I do not want to get a "kiwi.verify_trustzone" error again. How do I avoid that?
Thanks for your patience in advance!
You're on B350 and it's a good firmware to go (my phone was using it before 'conversion'). Flash twrp via fastboot, clear system/data/caches (backup your and app data first! if you want) and just flash Lineage + gapps (at once, no reboot between). You should be fine.
You are good to go
I have the problem that i cant get MM on it. I am still on b160.
I copied the dload folder for b330 on it and went to updater, menu, local update, update.app and press install
My phone reboots into twrp and nothing happens. I also cant boot into stock recovery. When i press vol up, vol down and power, my phone restarts over and over again. When i release the Buttons it just boots into android.
How do i get b300+ on it?
Activehannes said:
I have the problem that i cant get MM on it. I am still on b160.
I copied the dload folder for b330 on it and went to updater, menu, local update, update.app and press install
My phone reboots into twrp and nothing happens. I also cant boot into stock recovery. When i press vol up, vol down and power, my phone restarts over and over again. When i release the Buttons it just boots into android.
How do i get b300+ on it?
Click to expand...
Click to collapse
You can't flash stock images with twrp. You'll have to revert recovery back to stock one (extract image from b160) and then try to update.
ok that was a little bit to fast. do i need to download stock recovery and flash it via adb? because i got TWRP on it this way.
Activehannes said:
I have the problem that i cant get MM on it. I am still on b160.
Click to expand...
Click to collapse
Please do not steal my thread topic. I am trying to complete a tutorial.
you literally had the same problem I have. You had TWRP on it and tried to get stock recovery back to install MM. wouldn't it be part of a tut to explain how you did that? And since you know the answer, cant you tell me?
It worked! I finally got LineageOS working. Thanks to ShadySquirrel and PalakMi for your verification of my installation!
So here is my ultimate tutorial how to install LineageOS 14.1 (= Android 7.1.2) on a brand new Huawei Honor 5X KIW-L21 that comes originally with a Huawei branded Android 5.1.1:
Step 0: Preparation
You have up to date Google USB drivers installed
adb and fastboot are working
You know how to check checksums
You checked your device: It's a KIW-L21 with a Huawei version of Android installed, version 5.1.1 and EMUI 3.1. Your device is called "kiwi".
With your detailed device information, you ordered an unlocking password from Huawei (except your phone is already rooted)
Step 1: Install Stock MM (= Marshmallow = Android 6.0)
Root the phone via fastboot until the fastboot & rescue mode screen says "OEM Unlocked, FRP Unlocked"
You can reach the fastboot & rescue mode screen by plugging your phone via USB to a PC and keep volume-down + power buttons pushed until you see the Honor logo
Download the following images and its checksums and check them to avoid corrupted files:
- Stock recovery image from Extracted_L21_B130.zip: L21_B130\RECOVERY.img
- Stock MM from this nice file depot of the Honor 5X in this forum: KIW-L21 C432B350 - D003
Flash the stock recovery to the phone with fastboot when you are at the fastboot & rescue mode screen: "fastboot flash recovery RECOVERY.img"
Copy the UPDATE.APP of the above file to /dload/ at an external SD card and put it into the phone
Hold both volume buttons and the power button until reboot
The Honor reboots into an autorecovery mode, installing the file from UPDATE.APP automatically
Wait until it's ready and be happy about your Honor 5X with Stock MM
Check if you are at this status: Huawei Honor 5X with a Huawei-branded Android 6.0.1, EMUI 4.0, build KIW-L21C432B350, custom version CUSTC432D003, fastboot & rescue mode screen saying "PHONE Unlocked"
Step 2: Install LineageOS
Download the following images and its checksums and check them to avoid corrupted files:
- TWRP 3.1.1.0 recovery image for the Honor 5X (kiwi): twrp-3.1.1-0-kiwi.img
- LinageOS 14.1 nightly build for kiwi devices: lineage-14.1-20170816-nightly-kiwi-signed.zip
- Open GApps package for ARM64 / Android 7.1 (in my case I choose "pico" to have the calendar and Google Play): open_gapps-arm64-7.1-pico-20170819.zip
Place the files where you can reach them from your adb/fastboot-console
Connect phone via USB to PC
Keep volume-down + power buttons pressed until phone restarts and shows Honor logo, release buttons; "Fastboot & Rescue Mode" screen should appear
On PC, check with "fastboot devices" if phone is connected and ready to go (should list an ID and the state "fastboot")
Flash recovery with "fastboot flash recovery twrp-3.1.1-0-kiwi.img"; should report sending and writing with two "OKAY" messages and a "finished"
Try to start recovery mode by keeping volume-up + power buttons pressed until Honor logo appears, release buttons and wait ~ 20 seconds
In my case, this started the Huawei eRecovery – you don't want that (and it's not part of the LineageOS wiki)
Navigate with the volume buttons to "Reboot" and press the power button; phone should boot normally
Once your old Android is up again, activate USB-debugging
Check if adb is connected to your PC with "adb devices"; you must allow access to the device on your phone when prompted, the device should appear with the serial number and the state "device"
Restart into the recovery mode you really want with "adb reboot recovery" and wait until TWRP boots; allow writing on its first start
Check if adb is connected to your PC with "adb devices"; the device should appear with the serial number and the state "recovery"
Push LineageOS image and Google apps to phone with "adb push lineage-14.1-20170816-nightly-kiwi-signed.zip /sdcard/" and "adb push open_gapps-arm64-7.1-pico-20170819.zip /sdcard/"; both should report transferred size and time
Do not forget to push the md5 checksums if you are paranoid like me
Backup everything to an external SD card from the Backup menu in TWRP (needed 4021 MB of space and took ¼ hour in my case)
Seriously, backup! Even though you haven't done anything with the phone yet. You have a running firmware, that's worth a lot
In TWRP, select "Wipe" and then "Advanced Wipe"
Check "Cache", "Data" and "System" and swipe to wipe
Go "Back" to return to main menu, then select "Install"
As you have backed up to an external SD card, "Select Storage" to "Internal Storage"
Navigate to "/sdcard", select lineage-14.1-20170816-nightly-kiwi-signed.zip and swipe to confirm flash; should not take more than a minute
When it's done, do not reboot but navigate back to "Install" and install Google apps by selecting open_gapps-arm64-7.1-pico-20170819.zip and swiping to flash
Once installation has finished, return to the main menu, select "Reboot", and then "System"; the Honor logo will appear shortly
LineageOS 14.1 is now being initialized
Disconnect phone from PC
Profit!
I'll provide links to the images as soon as this forum allows me to.
Activehannes said:
you literally had the same problem I have. You had TWRP on it and tried to get stock recovery back to install MM. wouldn't it be part of a tut to explain how you did that? And since you know the answer, cant you tell me?
Click to expand...
Click to collapse
You are right, sorry, I was being too harsh. I'd like to post the link to the recovery image I've had success with, but I am not allowed to do so. Maybe you'll find it when you look for it and follow the instructions of my last post (Step 1). Does it work?
Et tu said:
It worked! I finally got LineageOS working. Thanks to ShadySquirrel and PalakMi for your verification of my installation!
So here is my ultimate tutorial how to install LineageOS 14.1 (= Android 7.1.2) on a brand new Huawei Honor 5X KIW-L21 that comes originally with a Huawei branded Android 5.1.1:
Step 0: Preparation
You have up to date Google USB drivers installed
adb and fastboot are working
You know how to check checksums
You checked your device: It's a KIW-L21 with a Huawei version of Android installed, version 5.1.1 and EMUI 3.1. Your device is called "kiwi".
With your detailed device information, you ordered an unlocking password from Huawei (except your phone is already rooted)
Step 1: Install Stock MM (= Marshmallow = Android 6.0)
Root the phone via fastboot until the fastboot & rescue mode screen says "OEM Unlocked, FRP Unlocked"
You can reach the fastboot & rescue mode screen by plugging your phone via USB to a PC and keep volume-down + power buttons pushed until you see the Honor logo
Download the following images and its checksums and check them to avoid corrupted files:
- Stock recovery image from Extracted_L21_B130.zip: L21_B130\RECOVERY.img
- Stock MM from this nice file depot of the Honor 5X in this forum: KIW-L21 C432B350 - D003
Flash the stock recovery to the phone with fastboot when you are at the fastboot & rescue mode screen: "fastboot flash recovery RECOVERY.img"
Copy the UPDATE.APP of the above file to /dload/ at an external SD card and put it into the phone
Hold both volume buttons and the power button until reboot
The Honor reboots into an autorecovery mode, installing the file from UPDATE.APP automatically
Wait until it's ready and be happy about your Honor 5X with Stock MM
Check if you are at this status: Huawei Honor 5X with a Huawei-branded Android 6.0.1, EMUI 4.0, build KIW-L21C432B350, custom version CUSTC432D003, fastboot & rescue mode screen saying "PHONE Unlocked"
Step 2: Install LineageOS
Download the following images and its checksums and check them to avoid corrupted files:
- TWRP 3.1.1.0 recovery image for the Honor 5X (kiwi): twrp-3.1.1-0-kiwi.img
- LinageOS 14.1 nightly build for kiwi devices: lineage-14.1-20170816-nightly-kiwi-signed.zip
- Open GApps package for ARM64 / Android 7.1 (in my case I choose "pico" to have the calendar and Google Play): open_gapps-arm64-7.1-pico-20170819.zip
Place the files where you can reach them from your adb/fastboot-console
Connect phone via USB to PC
Keep volume-down + power buttons pressed until phone restarts and shows Honor logo, release buttons; "Fastboot & Rescue Mode" screen should appear
On PC, check with "fastboot devices" if phone is connected and ready to go (should list an ID and the state "fastboot")
Flash recovery with "fastboot flash recovery twrp-3.1.1-0-kiwi.img"; should report sending and writing with two "OKAY" messages and a "finished"
Try to start recovery mode by keeping volume-up + power buttons pressed until Honor logo appears, release buttons and wait ~ 20 seconds
In my case, this started the Huawei eRecovery – you don't want that (and it's not part of the LineageOS wiki)
Navigate with the volume buttons to "Reboot" and press the power button; phone should boot normally
Once your old Android is up again, activate USB-debugging
Check if adb is connected to your PC with "adb devices"; you must allow access to the device on your phone when prompted, the device should appear with the serial number and the state "device"
Restart into the recovery mode you really want with "adb reboot recovery" and wait until TWRP boots; allow writing on its first start
Check if adb is connected to your PC with "adb devices"; the device should appear with the serial number and the state "recovery"
Push LineageOS image and Google apps to phone with "adb push lineage-14.1-20170816-nightly-kiwi-signed.zip /sdcard/" and "adb push open_gapps-arm64-7.1-pico-20170819.zip /sdcard/"; both should report transferred size and time
Do not forget to push the md5 checksums if you are paranoid like me
Backup everything to an external SD card from the Backup menu in TWRP (needed 4021 MB of space and took ¼ hour in my case)
Seriously, backup! Even though you haven't done anything with the phone yet. You have a running firmware, that's worth a lot
In TWRP, select "Wipe" and then "Advanced Wipe"
Check "Cache", "Data" and "System" and swipe to wipe
Go "Back" to return to main menu, then select "Install"
As you have backed up to an external SD card, "Select Storage" to "Internal Storage"
Navigate to "/sdcard", select lineage-14.1-20170816-nightly-kiwi-signed.zip and swipe to confirm flash; should not take more than a minute
When it's done, do not reboot but navigate back to "Install" and install Google apps by selecting open_gapps-arm64-7.1-pico-20170819.zip and swiping to flash
Once installation has finished, return to the main menu, select "Reboot", and then "System"; the Honor logo will appear shortly
LineageOS 14.1 is now being initialized
Disconnect phone from PC
Profit!
I'll provide links to the images as soon as this forum allows me to.
Click to expand...
Click to collapse
Hi I want the same kind of tutorial for KIW-L22 also. I tried almost every methods to flash any custom ROM. But all ended up as a failure. WhatI did was, I was in KIW-L22C675B360 version of EMUI. I unlocked the bootloader the official way, flashed twrp as proposed by TWRP site (fastboot flash recovery my-twrp.img). I booted into recovery successfully. I BackedUp all my partitions (Thank god that I did this). Then I wiped my Data, Dalvik-Cache, Cache, System, Android Secure. Then I flashed the latest Lineage OS (lineage-14.1-20170816-nightly-kiwi-signed.zip) and flashed the latest Open Gapps nano. Then I rebooted. There was no problem with the installation. Then the boot animation started loading and I was waiting to see LineageOS. :crying: :crying: But all of a sudden, the boot animation freezes and the phone starts rebooting. This was happening all the time no matter how many times the phone rebooted. I thought it might be a ROM problem and i went back to twrp by holding power up when the phone rebooted. Wipes all as before and flashed certain other ROMs like AospExtended, MIUI 8 (PatchRom), etc but neither of them booted. I don't know what to do after that and I restored my old TWRP backup and now I'm on stock EMUI KIW-L22C675B360. I would be thankful if I get a solution to solve this problem. Waiting eagerly for answers.
Uvneshkumar said:
Hi I want the same kind of tutorial for KIW-L22 also. I tried almost every methods to flash any custom ROM. But all ended up as a failure. WhatI did was, I was in KIW-L22C675B360 version of EMUI. I unlocked the bootloader the official way, flashed twrp as proposed by TWRP site (fastboot flash recovery my-twrp.img). I booted into recovery successfully. I BackedUp all my partitions (Thank god that I did this). Then I wiped my Data, Dalvik-Cache, Cache, System, Android Secure. Then I flashed the latest Lineage OS (lineage-14.1-20170816-nightly-kiwi-signed.zip) and flashed the latest Open Gapps nano. Then I rebooted. There was no problem with the installation. Then the boot animation started loading and I was waiting to see LineageOS. :crying: :crying: But all of a sudden, the boot animation freezes and the phone starts rebooting. This was happening all the time no matter how many times the phone rebooted. I thought it might be a ROM problem and i went back to twrp by holding power up when the phone rebooted. Wipes all as before and flashed certain other ROMs like AospExtended, MIUI 8 (PatchRom), etc but neither of them booted. I don't know what to do after that and I restored my old TWRP backup and now I'm on stock EMUI KIW-L22C675B360. I would be thankful if I get a solution to solve this problem. Waiting eagerly for answers.
Click to expand...
Click to collapse
The problem is with the B360, you should have been on an update before b360
PalakMi said:
The problem is with the B360, you should have been on an update before b360
Click to expand...
Click to collapse
Now after flashing the rom, I flashed a zip called "BaPatch.zip" and after that Lineage booted successfully.
Uvneshkumar said:
Now after flashing the rom, I flashed a zip called "BaPatch.zip" and after that Lineage booted successfully.
Click to expand...
Click to collapse
Good to know :highfive:
@Et tu, Brute? : mate, I followed your instructions but the device ended up in bootloop. Any help?
m on twrp 3.2.2.0
Lineage OS v14.1 (29th Jun build)
Gapps 7.1 x64 pico
Hello, believe me i have search, i have a lenovo vibe k5 plus a 6020l37, which oiginally came with 5.0, i nstalled lineage OS 6.0, then several custom roms with android 7, and then installed oreo with aosp rom (all with minimal adb), everythng works, but the battery last only a few hours, so i decided to keep tryin other roms, but, it turns out i no longer have twrp, no root, if i try to boot in fastboot/bootloader it just gets stuck in the lenovo logo, if i go to developers options i have no unlock oem option, not even in gray, it just doesnt show, even if i wait 2 weeks, kingroot or any app won´t get me root access, when i have the phone plugged into the cpu, adb recognizes it (with the phone turned on) i tried copying an img to the sd, but the phone gives me several errors i try to factory reset and after it ask for the pin, i tap the "erase all" button but does nothing, in recovery mode i wipe data cache, and partition, but it gives me errors like
E:/failed to mount /cache/recovery/last locale
couldn´t mount sd card
instalation aborted
E:/unknown fs_type "f2fs" for Cache
And many similar ones.
The lenovo moto smart assistan recognizes it, i go to rescue, download de image to flash it, and it gets stuck on 67% everytime, i tried qfill, but i cannot seem to get it recognize the port (the device) and two other apps like that, is there any known path to solve this? i appeciate the help, thank you so much.