Related
Dear All
I'm a new android user, I just get a new A50 from Australia and try to root it. It's successful with z4root and I try to install Thai font to system. Unfortuantely I did wrong by deleting font folder in the system, therefore I can't run the system again. When I power on, it still have only garmin asus android logo and can't use it again. Does anyone please let me know how to restore or resolve this problem, or I have to throw it away? Thank you in advance.
Cheers!
Winext
Android 1.6 or the new 2.1 Eclair update?
It's a new Eclair 2.1 update, is there any solution?
Connect it to your computer via USB cable.
Using ADB, try this:
ADB REBOOT RECOVERY.
If it works, a yellow triangle appears with the green android guy.
Hit the HOME button. A menu appears. Use volume up/down to move through the options. Tap power to select it I beleive.
Reset/wipe to factory is one of the options.
If you need it, ADB is found in the Android SDK.
If that doesn't work, try calling in to Garmin for support.
Sent from my Garminfone using XDA App
Dear Spazmogen
Thank you for your suggestion, but I'm really new with ANDROID.
I downloaded ANDROID SDK and try to install but it dodn't work.
I use Win 7 64bit, do I need another software to run this command.
If possible, please let me know some previous post that already teach for beginner.
Thank you in advance.
Cheers!
Winext
ADB is a command line tool. But you will have to get Android SDK installed on the computer 1st.
Read the instructions for installing the SDK here: http://developer.android.com/sdk/index.html
ADB commands: HERE.
Interesting. I got into the recovery screen using the Quick Boot app,used the home button to show the menu. The arrows and volume buttons move, but can't actually do anything. Probably related to missing files that are reported in the data/cache/recovery folder.
https://www.garminasus.com/en_US/support/eclair/006-B1130-00.update
official 2.1 update came out today for USA GARMINFONES. Not the A50 Nuvifones elsewhere in the world...
Is the update different from the leaked one?
Sent from my Garminfone using XDA App
I am waiting for an answer to that question myself. I have no plans to change from the leaked version Garmin posted in mid-November.
Sent from my Garminfone using XDA App
Apparently someone did a bit comparison and said they matched. Plus, I tried and it told me it was the same version. On the plus side, I messed up my recovery partition and recovered it using the backups I made of each partition after I loaded 2.1 (dump_image). I made img backups and tar backups of all the files in 1.6 (I am anal about backing up). Good thing because 2.1 doesn't come with flash_image.
I can get into fastboot and the driver loads and stuff, but I get no devices listed when I do fastboot devices command. Next stop is Ubuntu
I know it works,just need to know how to get to it. Btw,I tried both the Garmin fastboot and adb drivers as well as adding the device hardware id's into the android drivers and neither worked.
I also need to find out if there is a similar enough kernel that I can use to get a fully functional recovery mode. I did find out that you can use adb just fine in the stock one and it loads a serial driver as well.
any possible way I could get that backup you made? I apparently didnt save my backup to the pc. And currrently I messed up permissions on my Garmin trying to get recovery working. I cant run the update or anything.
I've just stumbled across this forum post from google, I too am need of fixing my phone. All that is faulty is that the recovery mode has been overwritten with an incorrect one. Is it possible to extract the recovery image and reflash it from the optus supplied Android 2.1 006-B1130-00.update file?
Or is there a way of just getting say Rom Manager to work some magic for me?
Yes, it is possible... would be easier if someone could just use dump_image on a phone that has a working recovery mode and root access. I can provide the dump app and instructions.
Where can I get the Optus update, and are you positive recovery works on it? Does it also have working fastboot?
And to the other poster, which partition do you need? Btw, Rom manager has a permission fix mode. I can get you a tar file if it is the system partition or your choice of img or tar for the others.
And to everyone, after updating to 2.1, do a master clear because a lot of 1.6 apps are left over... duplicates.
Also, odexing all apps speeds it up a lot, with the caveat that you have to re-run the odex.sh file (found somewhere here and modified by me to be more thorough) after every app update or you will get force closes.
Oh I just reflashed the update again, and I got my recover menu back!
I'm not sure if i need any help anymore, but thanks for your offer of help merwin.
By working, do you mean that you can get to it with a hardware key combination and can actually select items?
first of all ,i 'm sorry for my english .my a50 is dead too.i also delet font folder and i use the adb command 'adb reboot recovery'.but the error is device not found. and my pohone can not boot .it stop at the android guy . how can i setup the device..Q.......Q......help me ..pls
garmin-asus a50
i have this garmin asus a50 was running 2.1 after installing a few apps.
tried to reboot and now is stuck on android screen.
tried hard reset stuck on android screen with wipe userdata on top
please help!
garmin-asus a50 dead
yoyoset
i think i have the same problem please let me know of any progress
thank you
Hello when i, make system recovery, ant me tablet reboot, and don't not loading only show archos logo screen, and i cant use system recovery, where is the problem, how i can fix it?
If you had custom rom installed and made reset to factory settings, then this is an usual problem.
Try to flash rom again.
Check if you can enter in recovery menu by pressing "volume up + power on" on powered off device.
Thank you recovery menu now working, what rom is recomendet for me tablet?
Before installing custom rom, install official rom for your tablet, you can find it on archos website.
I'm using freezenook ROM. Do not reset your config in future with this rom. Only stock rom doing it correctly.
Archos 101 g9 Turbo
Hi All, i'm stuck in Archos A101S recovery mode, also my tablet is missing items from recovery such as...Mount, and i cant get into storage, and it also says on pc that A101S 299mb which means i cant even install a firmware, as it is too small to fit on there, somewhere along the lines...i've messed it up, i have no folders also in recovery mode such as Music, Videos etc
all i see is Archos A101S
would you like to recover your system?
No
Reboot
Update Firmware
Repair System
Format System
Please...any help would be fantastic...i love my Archos and used it all the time, i tried to update my firmware and by reformatting and wasn't sure if i had to Reset Android
Reset Media
Reset Android
Reformat Device
i think i reset everything and now feel a right lemon! 4 doing so, i have tried a lot of sites trying to sort this out but to no avail, i was pointed in this direction for help...because at the moment i have a black cracked tile in my bathroom and the tablet is the right size lol,
Thanx in advance :fingers-crossed:
Glen460 said:
Hi All, i'm stuck in Archos A101S recovery mode, also my tablet is missing items from recovery such as...Mount, and i cant get into storage, and it also says on pc that A101S 299mb which means i cant even install a firmware, as it is too small to fit on there, somewhere along the lines...i've messed it up, i have no folders also in recovery mode such as Music, Videos etc
all i see is Archos A101S
would you like to recover your system?
No
Reboot
Update Firmware
Repair System
Format System
Please...any help would be fantastic...i love my Archos and used it all the time, i tried to update my firmware and by reformatting and wasn't sure if i had to Reset Android
Reset Media
Reset Android
Reformat Device
i think i reset everything and now feel a right lemon! 4 doing so, i have tried a lot of sites trying to sort this out but to no avail, i was pointed in this direction for help...because at the moment i have a black cracked tile in my bathroom and the tablet is the right size lol,
Thanx in advance :fingers-crossed:
Click to expand...
Click to collapse
The stock firmware is only about 206 MB, download from here. http://www.archos.com/gb/support/support_tech/updates_fwm.html
Guide to installing custom firmware is here. http://forum.xda-developers.com/showthread.php?t=1871912
Archos 101 G9
stevemp said:
The stock firmware is only about 206 MB, download from here. http://www.archos.com/gb/support/support_tech/updates_fwm.html
Guide to installing custom firmware is here. http://forum.xda-developers.com/showthread.php?t=1871912
Click to expand...
Click to collapse
Thanx 4 replying...but still can't use this cos my device won't mount!
---------- Post added at 09:22 PM ---------- Previous post was at 09:04 PM ----------
Glen460 said:
Thanx 4 replying...but still can't use this cos my device won't mount!
Click to expand...
Click to collapse
p.s...it isn't actually 206mb...it's packed but when u move it to archos...it unpacks and the size is actually a lot larger
The update firmware option in recovery is what you want. Choose that. Hook data cable up to computer. In windows you should see a new drive pop up saying Recovery or Rec or something. It may say 180mb or something but Archos' firmware should fit on it just fine.
Archos 101 G9 Turbo
Djirin said:
The update firmware option in recovery is what you want. Choose that. Hook data cable up to computer. In windows you should see a new drive pop up saying Recovery or Rec or something. It may say 180mb or something but Archos' firmware should fit on it just fine.
Click to expand...
Click to collapse
Thanx stevemp and Djirin...just tried it the now and it worked straight away...i realised i was mucking it up also by pressing ok after the download which i kept on getting failed: (221)....i downloaded it...took out the usb lead and it prompted me to put usb back in and then i saw it installing with the blue stripe at the bottom of the screen...so happy now...think ill celebrate with a beer cheers buds!! :good: :good: :good:
I'm having the same issues.. my girlfriends kid hates me and bricked my archos 101 good...I only have a three hundred megabytes drive I don't see the actual hard drive for the Archos I put the firmware on there and as soon as it tries to update the firmware disappears and the drive becomes invisable/unreadable again. I do get an archos splash screen occasionally but it locks there.
I have to do the full archos format twice before my computer can see it again I'm trying on both windows 8 & 7.. I've tried with the supplied archos cable and went out and bought a new cable just in case both a 4 pin and 7 pin miniusb. I tried flashing the developer firmware and it booted up to the new splash screen froze there. I left ir on that screen went and did my laundry.. came home and nothing it was still stuck there.. i rebooted and i do not even see the watermark they talk about.. I'm ready to drop kick it but i love it..
I do know that the 300Mb drive does NOT have the correct serial number.. it is formatted fat 32..
With partition manager i can change the allocation from logical/primary. I can change it from a fat 32 to a fat 32 lba.
Or Linux fat 16 or something else. I tried changing the serial number of the drive and after the failed update it is incorrect again. And it wont allow me to enter the pc before the serial just the c.
I'm so frustrated and need help please my archos is my sanity on a 2hour bus and train ride to and from work everyday. This is going on week 3
Thanks for your help if you have any further ideas they are greatly appreciated
If you have only 300mb free I assume you are talking about the flash memory then. The HD models have an internal flash that programs get installed to and then the seperate HD where all your mp3s, videos, etc get installed to.
Have you gone into recovery and just tried to update the firmware from there directly? Same thing as Glen460 was instructed to do
Can some one point me in the right direction for the firmware for a t95z plus firmware it's a amlogic s912 chipset with 2gb ram
h t t p s://mega.nz/#F!Ix9zmZqC!LIVPa5zPR6XmcwODW42r7Q
Use this method to flash the box:
h t t p://androidpcreview.com/how-to-use-the-amlogic-usb-burning-tool-to-manually-update-firmware/3749/
You will need an usb to usb male cable. Connect to usb1 on the box. No power cable needed.
Worked for me.
are there newer images.. I bought one of these
https://www.aliexpress.com/item/2GB...73409096.html?spm=2114.search0104.8.57.YrpUy2
[Genuine] T95Z Plus 2GB 16GB 3GB 32GB Amlogic S912 Octa Core Android 7.1 OS Smart TV BOX 2.4G/5GHz WiFi BT4.0 4K pk X92 h96 pro+
I got the 3g/32g rom was fast and seemed ok android 7.1
until I upgraded or installed the superuser from chain DD said installed ok and asked to reboot which
I did for it only to hang on the boot animation... so very sad
I suspect its altered or written to the wrong partition?
now need to reflash
recovery works with toothpick
is there a image for this new update? and can it be flash from recovery from sd card so dont need a pc
as pc cable method is more a pain
Firmware for t95p ?
(3GB)
T95ZPLUS-7.1-912-3GB-17.3-v1072
https://goo.gl/RG92GR
by the way, who also want a 2GB or directly dl from their link are also welcome,
Below are the links from sunvell,
(2GB)
T95ZPLUS-7.1-912-2GB-17.3-v1013
http://pan.baidu.com/s/1jl7jLOU
Pw: 81uc
(3GB)
T95ZPLUS-7.1-912-3GB-17.3-v1072
http://pan.baidu.com/s/1hrPU5rY
Pw: gbrg
I add the info for others with bricked boxes or bad ram.. reformat reflash can bring them back
also try a new power pack.. often the voltage degrades over years and drops too low
I used the 3gb with the flashing tool usb to right sid port... leave power plug out.. and insert toothpick and
connect usb from pc.. should beep if pc detects device on USB and the tool should show finally
http://androidpcreview.com/how-to-use-the-amlogic-usb-burning-tool-to-manually-update-firmware/3749/
http://androidpcreview.com/wp-content/uploads/2015/12/USB_Burning_Tool_v2.0.6.2_build2.rar
---------- Post added at 12:49 AM ---------- Previous post was at 12:43 AM ----------
endera said:
Firmware for t95p ?
Click to expand...
Click to collapse
you could try asking these guys
http://freaktab.com/forum/tv-player...s/s905x/607678-sunvell-t95p-tv-box-2-8gb-wifi
I thought i read some 95z plus roms will work but not sure.
---------- Post added at 01:02 AM ---------- Previous post was at 12:49 AM ----------
endera said:
Firmware for t95p ?
Click to expand...
Click to collapse
similar cpu
http://chinagadgetsreviews.com/firmware-t95x-tv-box.html
(2GB)
T95ZPLUS-7.1-912-2GB-17.3-v1013
http://pan.baidu.com/s/1jl7jLOU
Pw: 81uc
The above link for 2GB is not working, also can you please clarify for which WiFi chip is the above firmware? There are three versions of T95Z Plus: WiFi 8830, WiFi 6330 and WiFi 6335. If one flashes the wrong version, then WiFi will not be working on his box...
Thanks for this thread. I am fighting with a T95z PLUS 3/32GB stuck on boot. I am going to try the above ROM (the one in gdrive is still available) as soon as I can get a USB cable, and report the results.
EDIT: Is there a way to flash from SD? I have no usb-to-usb cable to try right now, I am going to have to buy one and wait for it...
EDIT 2: Flashed through SD directly. Extracted the contents to a FAT32 formatted SD card and inserted it in the T95Z Plus. Booted normally and proceeded to "upgrade". The box is working right now. Sound are wifi are working - cannot say more than that so far. I don't know if the version is older than the original that came with the box, but I guess it should be possible to update if necessary (not sure how, though).
Thanks @kiwiman2000!
I can see from the boot screen that the firmware posted for the 3/32GB model by Kiwiman2000 with which I recovered my box is the 20170623 version. I know that the one my box had before rescuing it was 20170807, so it is possible that somewhere a newer version is available. The OTA updater is not finding anything online, though. In the meantime I will stick with this working version, and if I happen to find an update, I will post it here.
After playing around with the T95z Plus after installing the above firmware, I started noticing some bugs. First, the Play Store resets itself constantly. It seems every time it updates from the factory version to the current one, whenever you open it, it goes back to factory, asks for permissions again, and resets all settings.
I have tried to replace the system apk with an updated version. This works but only when starting it for the first time. It then fails to open, and will only open again after clearing the app data.
Does anyne know how to correctly fix a broken gapps?
Latest T95Z Plus Firmware. Android v7.1.1 For 2GB RAM/16GB S912 Chipset
Here is the latest firmware for the T95Z Plus Android tv box. Works on Sunvell, and also on Weily branded T95Z plus and probably all models with same chipset. Says android 7.1.2 but it’s actually 7.1.1. Latest firmware for this box tho. Runs great.
Google search “latest t95z plus firmware” and it’ll be the first site you see called entertainmentbox. I can’t post links here as I’m a new user.
You don’t need to use the male to male USB cable method to flash firmware. You can use Burn Card maker and update box using micro sd card. USB burn card maker can flash new firmware and also revive bricked Amlogic based android tv boxes.
search on YouTube for “t95z plus burn card maker” and there are many videos on how to use this method.
Hope this helps, it will get your box updated to Android v7.1.1 build T5ZP1013 kernel v3.14.29 android security patch level February 1, 2017 Model T95ZPLUS despite the build saying T5ZP1013. I assure you it’s the T95Z Plus firmware.
As for google play updating, then returning back to previous version and default settings every time I believe this is to keep the box running without breaking any apps or software for the current firmware. You really only need the version the firmware comes with. If you wish to update keep a lookout for future firmware releases. My box has the same issue as do others I have asked. I also like to have the latest version of everything too so this is what prompted me to check into the google play thing myself.
Happy Flashing!!! -~
T95z Plus will not flash
I have tried over 7 different roms, different usb, ect all the same result
UBOOT/Partition _aml_dtb/Verify patition/Error result can't pass 9%
What does that mean??
Hi friends, which application is responsible for display (LED) on the device?
victorsyt said:
Hi friends, which application is responsible for display (LED) on the device?
Click to expand...
Click to collapse
It's the WinS8Launcher system app. This also five the CEC options in the settings.
mr sharpey said:
It's the WinS8Launcher system app. This also five the CEC options in the settings.
Click to expand...
Click to collapse
Thanks. It's important.
I ran into this problem, since Kodi wasn't playing right. I used a script program universal init.d and supersu, and after supersu rebooted the device it hung on reboot. I have an easytone t95zplus but don't see any of their firmware posted online.
startreksuite said:
I ran into this problem, since Kodi wasn't playing right. I used a script program universal init.d and supersu, and after supersu rebooted the device it hung on reboot. I have an easytone t95zplus but don't see any of their firmware posted online.
Click to expand...
Click to collapse
You first need to determine the precise model to get the firmware:
1) Is it a 16 or 32 GB model?
2) Is it model q200 or q201?
You can check these by booting into recovery.
Need files for recovery
Hello guys, i need some dire help.
i have a 3G 32GB variant with AP6255.
my wifi was broken hence i browsed thru and was flashing the firmwares using tooth pick method.
1st attempt. - my recovery didnt boot at all. no HDMI signal was going to the TV
2nd attempt - managed to boot to recovery and flashed the firmware. wifi was not fixed.
3rd attempt onwards i could never get into recovery.
looks like my sd card marker is missing some boot files.
appreciate someone could guide me the extact steps and files i need for recovery to work.
archrival9 said:
looks like my sd card marker is missing some boot files.
appreciate someone could guide me the extact steps and files i need for recovery to work.
Click to expand...
Click to collapse
I am not sure of how to help you- but I will tell you this: I did not use a SD card maker. I just pasted the img file into the root of the SD card AND also included the extra files (which I believe are needed for proper boot and installing) from a different img file package I found somewhere else. So, tell me if this can make sense somehow:
Get the img file you tried to use in step 3 and put it in a SD along the extra files included in the package you used in the second attempt.
This is sort of the way I had to go to fix mine (although, for the sake of truth, my box is pretty unstable now - freeezes and hangs often). I hope an update would come out, but nothing so far.
Hi everybody, I'm just posting to let you know that I have very much upgraded my T95Z Plus 3/32 through the instructions in this thread, which includes firmware and recovery files.
Hopefully someone else can give it a try.
hello,
what / where is the last upgrade / custom rom for T95z plus 2/16gb S912 ?
https://mega.nz/#!BKQS2a4K!G5YrKHWUy2HvL2TOqOlLzwn7Sulp7q8i7-h8uVi0uk8
UNIVERSAL V2 - IF TOP DONT WORK
https://mega.nz/#!bphxHJBB!jRhp0AeNa8orSwscFJHJdE7M14_GxQgbHpnbq-21vy8
Step 1 Download & Extract the bundle for your device
You will be getting either a zip or 7z file, personally I would use 7zip to extract these files, you should get a recovery.img and also a folder called TWRP. If you have these two things move on to step 2
Step 2 - Locations
Both SD Card and USB being formatted Fat32 - Some boxes except most s905 you can use the SD card for both TWRP folder and recovery.img, Regardless I use SD only for recovery.img, so drag and drop the recovery.img onto the Fat32 SD Card and Drag and drop the TWRP folder onto the Fat32 USB drive. Done
Step 3 - Formatting before installing.
Connect everything but the power - Connect a real USB mouse/Airmouse to the box due to the regular remote will not work, connect the USB drive and connect the SD Card, Everything but power. Some boxes have a reset button on the side and some the reset button is inside the AV jack, you will feel it, If in the AV jack simply use a toothpick or use a Q Tip with the cotton end removed and slide it in the AV jack and you will feel the button.
HOLD THIS BUTTON AND DO NOT LET GO - At the same time plug it in and keep holding, boxes with physical power button press this now. You will be presented with a blue screen, you will get a read only scren most likely, slide to proceed.
First thing first I always recommend backing up partitions incase something is to go wrong. There are tons of cloned boxes its hard to cover them all. I personally would go to backup. Locate where it says storage, and change from internal to usb otg for USB drive or external sd for your SD Card. Backup all your partitions.
When done, go back. Press the little house button on the screen or the back button until back at the TWRP menu, go to restore, Make sure usb otg or external sd is chosen, wherever you put the TWRP folder, If you are using a box not from me PM me the model and I will confirm what to restore, for example, M8, M8S BCM and AP models, MX3, M10, You can restore all, S912 boxes some are different so PM me to be safe. After I tell you what to restore do so. Let it do its thing. Once done, reboot and enjoy. If it fails by any means. Do not reboot, just go back and choose wipe, format data, type yes press enter. Once done just go back and restore data JUST BY ITSELF so untick everything but data, once finished restore all the other partitions. All done
Enjoy the build - When you first boot my firmware let it sit after it boots for a good minute or two. It will auto load my custom firmware patches and more.
If you are using M8, M8S, M10, MXq you need to follow below -
When you start the TV box. Let it sit a few minutes and first things first. In Android applications click on No Frills CPU - the accelerometer and when it opens click apply and than exit. It is super important with my custom rom to unlock the other 2 CPU Cores and the other 4 GPU Threads. If this does not make sense just go into my apps and look for no frills, same app as on the desktop you will just see the name instead.
NOT EVERY FIRMWARE HAS NO FRILLS - IF NOT DO NOT WORRY ABOUT IT.
i do not own the firmware
credits go to ghostware.
Congrats!
Just a clarification, which ROM are you using as "skeleton", and what ROM did you take the /system partition from?
MyM8SFinallyWorks said:
Just a clarification, which ROM are you using as "skeleton", and what ROM did you take the /system partition from?
Click to expand...
Click to collapse
i used a m8s+ rom and the 5.1.1 rom from acemax the only problem is with the m8s+ rom is ethernet dont work so by doing this i got ethernet to work.
Thanks for this link
Hello, I just want to ask how do you know if your box is the "ap3660" box and how can you find out?
my box is the m8s amlogic s812
thanks.
lutty321 said:
Hello, I just want to ask how do you know if your box is the "ap3660" box and how can you find out?
my box is the m8s amlogic s812
thanks.
Click to expand...
Click to collapse
you have to open it and look inside
Hi. I cannot get my box to the boot menu with the toothpick reset?!? It just loops into rebooting and goes back to original setup. I have disabled the restore from backup too but still? Pls help!!!!
Tazosman said:
Hi. I cannot get my box to the boot menu with the toothpick reset?!? It just loops into rebooting and goes back to original setup. I have disabled the restore from backup too but still? Pls help!!!!
Click to expand...
Click to collapse
if you have the recovery.img file on the root of the sd card, toothpick method should take you to TWRP where you can then flash the zip. did you give it some time (with the reset button pressed in)? it can take approx 10 seconds sometimes.
Failed signiture
Hi guys i have tried to flash my box with the firmware that was posted here by daniel and i am getting the problem of it saying....
"E: failed to verify whole-file signiture
E: signiture verification failed
Installation aborted "
Ive tried it a few times and still no luck.
Could anyone point me in the right direction of a successful flash please?
Thanks in advance
Hi
i just tryed this metod but my M8S does not respound anymore(no on light) it seems dat it is deed???Has any body iedea what can i do now?
Hey is there any way to fix the remote volume problem? I restored my remote config from 4.4 but everything worked except the volume button. BTW I have the remote with the red, green, yellow and blue buttons at the volume control.
Devmau53 said:
Hi guys i have tried to flash my box with the firmware that was posted here by daniel and i am getting the problem of it saying....
"E: failed to verify whole-file signiture
E: signiture verification failed
Installation aborted "
Ive tried it a few times and still no luck.
Could anyone point me in the right direction of a successful flash please?
Thanks in advance
Click to expand...
Click to collapse
Either your download is corrupt, or you are not using TWRP to perform the update.
Has anyone been having random freezing and reboots?
wolfpack64 said:
Hey is there any way to fix the remote volume problem? I restored my remote config from 4.4 but everything worked except the volume button. BTW I have the remote with the red, green, yellow and blue buttons at the volume control.
Click to expand...
Click to collapse
I also had that problem even though I flashed the square remote zip after the lollipop update. I might have flashed the M8N remote though to be honest and I don't have the box anymore to test more remote patches.
You can try the M8S remote zip from the link below and report back if it worked for you.
http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s802/eny-acemax-ott/firmware-roms-tools-af/18312-s802-multi-remote-patcher-zips
Hi,
Did install this rom provided by d4nielr on my device M8S CS 812M8 V1.3 20150921
Install was perfect boot once and there was a working 5.1 rom with ethernet
Only if i reboot my device its bricked. red licht only recover whith USB burning tool
This is the 5.1 firmware that reboot correctly but ethernet is not working (M8S(n200c)_to_M8S+ 5.1 20151022-aml_upgrade_package) here https://mega.nz/#!ZUxQSJQK!nt8g1nGV6...aLQuUIGK-c-jbg
Can someone help me with this
highpoiss said:
Hi,
Did install this rom provided by d4nielr on my device M8S CS 812M8 V1.3 20150921
Install was perfect boot once and there was a working 5.1 rom with ethernet
Only if i reboot my device its bricked. red licht only recover whith USB burning tool
This is the 5.1 firmware that reboot correctly but ethernet is not working (M8S(n200c)_to_M8S+ 5.1 20151022-aml_upgrade_package) here https://mega.nz/#!ZUxQSJQK!nt8g1nGV6...aLQuUIGK-c-jbg
Can someone help me with this
Click to expand...
Click to collapse
I had the exact same problem when trying to upgrade to something M8S+ based. Worked perfectly the first time, but I could not start it up after a cold boot. Have you tried my original approach instead using the Team DevDigitel ROM?
MyM8SFinallyWorks said:
I had the exact same problem when trying to upgrade to something M8S+ based. Worked perfectly the first time, but I could not start it up after a cold boot. Have you tried my original approach instead using the Team DevDigitel ROM?
Click to expand...
Click to collapse
Yes did try your approach only the acemax 5.1 firmware wil instal but i have a direct brick at first boot red licht only recover whith USB burning tool
highpoiss said:
Yes did try your approach only the acemax 5.1 firmware wil instal but i have a direct brick at first boot red licht only recover whith USB burning tool
Click to expand...
Click to collapse
And what happens if you first go back to your stock Kitkat 4.4 ROM (with USB burning tool), and then try with my original approach (with SD card)?
MyM8SFinallyWorks said:
And what happens if you first go back to your stock Kitkat 4.4 ROM (with USB burning tool), and then try with my original approach (with SD card)?
Click to expand...
Click to collapse
Same problem installing acemax firmware over original 4.4 rom wil brick my device brick at first boot.
Help needed M8S ap6360 v1.3 20150921
Can someone make a TRWP backup from this rom ? specially the boot file
Also want to know where to download the M8s+ rom what daniel uses in this treat
Thanks
Hi d4nielr,
Wanted to thank you for the excellent work in compiling this ROM to support m8s app6330.
After trying out various ROMs and in the process bricking my device several times and un-bricking it using the burning tool, I finally came across your forum.
Thanks for the wonderful rom and the installation was a breeze and smooth sailing throughout.
Btw, for the installation I can only use the other most USB port. If I insert the sd card into the inner most usb port, it will take me to the bootloader.
So, for the TEAMWIN logo to appears, I need to put the sd card into the outer most usb port which is located at the back of my m8s unit.
cheers.......
Update.....
Unfortunately, after a cold boot, it doesn't work any longer. Back to kitkat using usb burning tool.
Good night I hope your team will help me update my box TV Knowing that the device has an
Android version 6.0
Amlogic S905x
P212
I would like to update it to the latest version of android to take advantage of installing applications can you help me
Attached are photos from inside the device
edisondweikat said:
Good night I hope your team will help me update my box TV Knowing that the device has an
Android version 6.0
Amlogic S905x
P212
I would like to update it to the latest version of android to take advantage of installing applications can you help me
Attached are photos from inside the device
Click to expand...
Click to collapse
you can try my custom rom for s905x
aidanmacgregor said:
you can try my custom rom for s905x
Click to expand...
Click to collapse
How to download a ROM and install it on your Xbox TV ??
aidanmacgregor said:
you can try my custom rom for s905x
Click to expand...
Click to collapse
How to download a ROM and install it on your Xbox TV
And knowing the appropriate system for the device, knowing there are many versions upon download
If you don't know your WiFi chipset open you box to find it and download the corresponding rom from Aidan's download repo , if your not sure post pictures of it and it will be identified
jimenis said:
If you don't know your WiFi chipset open you box to find it and download the corresponding rom from Aidan's download repo , if your not sure post pictures of it and it will be identified
Click to expand...
Click to collapse
According to what I saw on the AIDA64 app
It appeared to me that the Wifi Recieves is the type and model of the telink company
Quick Google of the board I see an ap6212 but really you need to open your box and see what's printed on the WiFi chipset . attached is what I found so check against yours and remember you will loose any widevine certification install a new firmware
AP6212
Download the ampak ap6212 version listed and install with usb burn tool https://androidmtk.com/download-amlogic-usb-burning-tool
Remember to uncheck erase bootloader and have a mouse and keyboard just incase your remote won't work
Do I only deselect the erase bootloader .. or is there something else
I hope to explain how to connect the device to the computer and install the ROM
You will load the IMG file first , deselect erase bootloader to connect use a double male usb lead to connect box to pc , try first by simply inserting see if it shows as connected if not locate the recovery button and depress while inserting the usb once connected press start and wait till it completed to 100%. I would try usb port nearest power supply or marked otg ...good luck
jimenis said:
You will load the IMG file first , deselect erase bootloader to connect use a double male usb lead to connect box to pc , try first by simply inserting see if it shows as connected if not locate the recovery button and depress while inserting the usb once connected press start and wait till it completed to 100%. I would try usb port nearest power supply or marked otg ...good luck
Click to expand...
Click to collapse
What is the redeem button and where do I find it ??
As for the program, this is as good as the picture ??
Currently, I will be looking for a dual male usb cable in the store
Use version 2.2.4 of usb burn tool , it will show normal erase use that setting , uncheck erase bootloader have the rom you want loaded by going to file select IMG .never heard redeem button ...
jimenis said:
Use version 2.2.4 of usb burn tool , it will show normal erase use that setting , uncheck erase bootloader have the rom you want loaded by going to file select IMG .never heard redeem button ...
Click to expand...
Click to collapse
When connecting the cable, does it connect automatically, or does it need to press a specific button?
All boxes are different, some just connect others need reset button held down with toothpick and you have to find the correct usb port like advised or you can short the band using a pin .Another way to upgrade is by using burn card maker to create bootable SD from the image once made insert SD card and if your system is booted use a program like terminal emulator to reboot and start the update the command is reboot update
I installed the system on the box TV and it worked perfectly, but the problem was that it did not recognize the remote. What is the solution to control it? I hope you will benefit
Good for the remote maybe somebody else will point you in right direction it involves taking files from old IMG and modifications to kernel , a good solution is to buy a cheap Bluetooth remote or usb remote , some game controllers work or just use a usb keyboard and mouse
Who is the person who will define the old remote control on the system and where to find it
You could try asking the owner of the rom under his thread https://forum.xda-developers.com/t/...date-tv-netflix.4191157/page-37#post-85043449