Related
I download NFS no limit and I read somewhere it supported vulkan ..I am using RR ROM with radon kernel . Do I need to make and changes to json file to.make sure its running on vulkan api and not open gl?
there is no trigger for that, if its installed then it will run automatically
aizen_souske said:
I download NFS no limit and I read somewhere it supported vulkan ..I am using RR ROM with radon kernel . Do I need to make and changes to json file to.make sure its running on vulkan api and not open gl?
Click to expand...
Click to collapse
Well vulkan api is just an driver for the GPU hence if ur rom (only nougat based roms) has intigrated Vulkan Api then the GPU by default uses it to render the graphics
Ressurection remix has vulkan api right?
aizen_souske said:
Ressurection remix has vulkan api right?
Click to expand...
Click to collapse
Nope, CM does.
im currently using aex 4.4 Android 7.1.2 (Nougat) with chtolly kernel, i already add persist.camera.HAL3.enabled=1 but it takes no effect, can somebody tell me how to use gcam ?, and what version of gcam that support redmi3
ido doesn't support Google camera(Not supported by hardware),So you can only use Google Camera 3.2 and below
BlissROMs 14.2
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
BLESS 11 is a project which based on BlissROMs 14.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
base: BlissROMs 14.2
latest build: 2021.05.02
treble patches: v306
SPL: 5 April 2021
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CLICK H3RE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS • ABC rom • PixelExperience • SyberiaOS • Evolution-X
reserved_one
reserved_two
awesomeness
Excelent work
This gsi smooth and stable, but i guess bliss team not put all cuztomise setting yet. And they change from lineage to aosp with this version
Hi folks, as you maybe know all my GSI works suspended
Build server damaged and now for maintenance, I haven't information about his further fate
So... I don't know when I can resume my GSI building
By the way, this is not my server, literally I can't do anything to help
I can't even send money, my country is not supported in many payment systems
If you want to help, you can send donations to https://www.paypal.com/paypalme/electrikjesus
(he is the owner of the server, and he long gives me his server - I made a lot of GSI builds on it)
I have a Blackview BV9600E phone, and ROM file "bless-v306-210502-arm64-bgZ.img" runs perfect.
Only has a little thing that was aviable on previous revision: LED NOTIFICATIONs has no control, so I must install a led control APK from Google PlayStore (LIGHT FLOW).
Also, System Camera is very poor, but runs perfectly.
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
We are expecting new revision (Like Samsung has yet new beta).
Many thanks.
juandi34 said:
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
Click to expand...
Click to collapse
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
juandi34 said:
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
Click to expand...
Click to collapse
call record should 100% works only with AOSP Dialer, not with Google one
eremitein said:
call record should 100% works only with AOSP Dialer, not with Google one
Click to expand...
Click to collapse
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
I have found it on https://github.com/A2HI2H/Aosp_Dialer_With_Call_Recording
... may I install via TWRP this version and may works 100% ???
Thank you.
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
It doesn´t works.
I try and the error is keep going.
juandi34 said:
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
Click to expand...
Click to collapse
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
juandi34 said:
It doesn´t works.
I try and the error is keep going.
Click to expand...
Click to collapse
sad, is it works in the another gsi?
eremitein said:
sad, is it works in the another gsi?
Click to expand...
Click to collapse
It works in the original ROM.
eremitein said:
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
Click to expand...
Click to collapse
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
-------------------------------
eremiteinCan you share in this forum the correct APK or ZIP to install via APK or TWRP ???
juandi34 said:
no, it's Google dialer
-------------------------------
eremiteinCan you share in this forum the correct APK or ZIP to install via APK or TWRP ???
Click to expand...
Click to collapse
which apk?
I have a pull request open for this overlay but until a new phh GSI comes out, you can flash it via Magisk Manager.
It does add a functional auto brightness. I'm running it with Pixel Experience Plus GSI.
Magisk Module here.
https://file.io/MSfnCRY65ESX
Anx Camera for custom ROMs [ DEPRECATED ]
PS: Use Mi camera new port from second post.
Android 12 & 12L
Download:
- v7.0
Android 13
Download:
- v7.1 ( working on Pixel Os except 48MP)
- v7.2 ( working on many roms )
1. Flash miui camera magisk module.
2. Reboot.
3. Enable Permissions in App Info if launching the app at first does not ask for any permission (Camera, Files, Location, Microphone).
Changelogs:
09.09.2022
• Fixed slow motion along with 48MP mode.
• Fixed Portrait mode + filters along with wide/uw/macro lens.
• Enabled documents, Night, short video, time-laps, long exposure and clone modes.
• Enabled and edited watermark as "SHOT ON REDMI NOTE 10 AI QUAD CAMERA".
18.09.2022
• Fixed portrait again on some Roms.
• Fixed HDR mode on back camera.
• Fixed broken zoom ( green screen ).
17.10.2022
• Upgraded to v7.2 and dropped A12 builds.
• Fixed 48MP on A13 ( thanks to @Anush02198 for help).
• Fixed front portrait.
• Removed front slow motion button ( was causing crashes ).
• Removed scanner miui app and fixed Document option.
AEonAX link
AnxCamera wiki
Thanks to:
AEonAX, SonalSingh18 and AMRGAMAL1
New Mi Camera port [ magisk module]
Version 4.3
Build date : 18-11-2022
For mojito A13 Custom Roms
Mi Camera magisk module:
➥ Download [Gdrive]
Instructions:
• Delete any anx / miui camera magisk modules if there is already.
• Flash via magisk manager Mi Camera magisk module and reboot to system.
• If necessary, flash 48MP fix magisk module according to android security patch then reboot to system ( uninstall 48MP fix if you get "can't connect to camera").
48MP fix for android 13 magisk module (November 2022 security patch and previous):
➥ Download [Gdrive]
48MP fix for android 13 magisk module (+December 2022 security patch):
➥ Download [Mega]
48MP fix for android 12 magisk module:
➥ Download [Gdrive]
Changelog:
• Optimized for mojito.
• Added necessary vendor libraries.
• Unnecessary codes removed.
• Experimental features unlocked.
• Enabled Night, 48MP, Short video, Panorama, Documents, VLOG, Time-Laps, Slow motion, Movie Effects, Ai Watermark, Custom Watermark, Clone modes..
15-12-2022
• added new 48MP fix for December security patch.
29-12-2022
• Removed parallel processing from experimental features.
• Switched to platform keys.
• Fixed few sepolicy rules.
11-06-2023
• Fixed timed burst in pro mode.
• Fixed back portrait in some ROMs.
• Removed experimental features and its annoying message.
• Switched to original mi camera icon.
• Added monet support (only in camera settings for now).
• Fixed parallel-processing on Android 13 (by ceracz)
• Set default HDR mode to Auto (by ceracz).
• Dropped stock camera provider (by ceracz), so no need to 48MP fix.
19-06-2023
• Fixed blur in background on portrait mode.
Notes:
• ROMs builders should add this commit, to fix front camera & portrait issues if it is not included in rom source: https://github.com/SpiceOS/android_bionic/commit/e1b0c860ea4dfc74cf9c016812b0d3aea315b1d0
• For those who want include Mi Camera on their builds, use this repo, this commit and this commit.
• To fix 48mp from source add this commit:
https://review.lineageos.org/q/topic:twelve-camera-privapp
• Don't use spoofing module like Dolby Atmos or Pixel props .. Otherwise they will affect camera functionallies.
Thanks to:
AmrGamal, Ceracz ,Praditia Nur, Anush,
Anx team and all testers.
Do you have MIUI gallery?
ibanezred16 said:
Do you have MIUI gallery?
Click to expand...
Click to collapse
This apk worked for me:
Google Drive - Download warning
drive.google.com
Disable Force Encryption for
Mojito / oss vendor :
Usage:
1- Comming from encrypted rom
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Format data
- Reboot system
2- Comming from decrypted rom
- Wipe data/dalvik/cache
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Reboot system
Notes:
• This zip decrypt your data.
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Increase sawp (ZRAM) from 2Gb to 4Gb
installation:
- Go to ofox recovery
- Flash attached zip
- Reboot to system
Ps:
Some roms have limited vendor partition size and RO, so they don't accept fstab.zram file modification or decryption.
Don't flash this zip on Roms having Neternels kernel as it has by default 4gb vbswap.
KProfiles modes (only for neternels kernel) :
Switch between battery , balanced and performance modes (manual or auto) using KProfiles app ( settings / battery / or using qs tile ).
- Flash Kprofiles magisk module.
- Reboot.
- Tested and worked on many a12L/a13 roms.
Ps:
It won't work on Roms using non-Neternels kernel.
Hami_Do said:
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Click to expand...
Click to collapse
This is a great achievement. Weldone Hami_do
Hami_Do said:
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on Roms having RO vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Click to expand...
Click to collapse
Unlike the classic method which decrypts data at vendor fstab level, the new method can decrypt data even on RO roms such as erofs roms.
Soon i will let you know how..
Edit:
Last time I have decrypted successfully Arrow Os A13 erofs (Read Only ROM) using dfe-neo from here :
[A/B][A-ONLY][SCRIPT][READ-ONLY][EROFS][ANDROID 10+] Universal Disable Force Encryption for RO and RW "NEO STABLE"
Disable Force Encryption NEO Do you all know what DFE is? no? Anyway. Basically, your device has an encrypted data section "/data" by default. Let's look at the advantages of google's solution that we will lose after disabling encryption: -...
forum.xda-developers.com
thanks for the miui camera port
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Has anyone tried the flashable anx camera on pixel os a12?
devcon69 said:
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Click to expand...
Click to collapse
Can you show which pixel props to disable?
Mthw said:
Has anyone tried the flashable anx camera on pixel os a12?
Click to expand...
Click to collapse
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
pihpih95 said:
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
Click to expand...
Click to collapse
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Samir2298 said:
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Click to expand...
Click to collapse
I see, thanks for the information i think i will try anxcam with WCSF later and report it back here
Mthw said:
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Click to expand...
Click to collapse
Flashing files directly in system you can't on erofs i agree, but flashing magisk modules on erofs is possible , there is no problem.
----
@pihpih95 I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Hami_Do said:
I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Click to expand...
Click to collapse
i found that whenever i record the video , it is not save to any of my storage , how to overcome this problem ? im using WCSF-PLC latest on AncientOS GSI,taking picture just fine , im using port v7 anxcam