Hello guys,
I have a problem with my OnePlus X, and it would be lovely if I could get some help or advice from you guys.
> To provide some slight background, I purchased this off of eBay to complete my OnePlus collection. Most listings were above what OnePlus originally sold the phone for, but I found one for $125 in good condition by a seller with a good rating. It was advertised as soft-bricked, with Fastboot in working order. I thought "no problem, I'll just reflash it and be on my merry way."
Now onto the issue. I received it, charged it up, and attempted flashing the official recovery provided by OnePlus, but something is not working. I've been tinkering with Android for a number of years now, so I troubleshooted as much as I could, but to no avail.
1. Starting with device unplugged and powered off, boot into fastboot
2. Plugged into the computer, and ran `fastboot devices` to ensure it's recognized. After that, I flashed the recovery.img that was on my desktop with `fastboot flash recovery recovery.img` (yes I was in the correct directory). It looked successful. Picture of cmd response text at the following imgur album: /a/25DEQ (sorry I cannot post full links yet, had to create a new xda profile, forgot my old one :/
3. Unplugged the phone, powered off, Volume Down + Power to attempt boot into recovery. Failure. It just turns on with the 1+ logo, and quickly flashes the 'android' logo at the bottom. It stays like this until I manually power off.
I'm a bit stumped I have to admit. I would greatly appreciate any input you folks have. Thank you.
AndriyEtch said:
Hello guys,
I have a problem with my OnePlus X, and it would be lovely if I could get some help or advice from you guys.
> To provide some slight background, I purchased this off of eBay to complete my OnePlus collection. Most listings were above what OnePlus originally sold the phone for, but I found one for $125 in good condition by a seller with a good rating. It was advertised as soft-bricked, with Fastboot in working order. I thought "no problem, I'll just reflash it and be on my merry way."
Now onto the issue. I received it, charged it up, and attempted flashing the official recovery provided by OnePlus, but something is not working. I've been tinkering with Android for a number of years now, so I troubleshooted as much as I could, but to no avail.
1. Starting with device unplugged and powered off, boot into fastboot
2. Plugged into the computer, and ran `fastboot devices` to ensure it's recognized. After that, I flashed the recovery.img that was on my desktop with `fastboot flash recovery recovery.img` (yes I was in the correct directory). It looked successful. Picture of cmd response text at the following imgur album: /a/25DEQ (sorry I cannot post full links yet, had to create a new xda profile, forgot my old one :/
3. Unplugged the phone, powered off, Volume Down + Power to attempt boot into recovery. Failure. It just turns on with the 1+ logo, and quickly flashes the 'android' logo at the bottom. It stays like this until I manually power off.
I'm a bit stumped I have to admit. I would greatly appreciate any input you folks have. Thank you.
Click to expand...
Click to collapse
Which recovery u tried? Did u knOw the previous os version details?
And try this after flashing recovery in fastboot, boot into it directly by giving a cmd "fastboot boot recovery.img"
cva_kabil said:
Which recovery u tried? Did u knOw the previous os version details?
And try this after flashing recovery in fastboot, boot into it directly by giving a cmd "fastboot boot recovery.img"
Click to expand...
Click to collapse
Hi! Thank you for your reply
I posted this same question on the /r/oneplus subreddit, and received a quick and helpful walkthrough. Turns out part of the problem was that the micro-usb port on the phone itself is a bit unreliable. I haven't investigated too deeply, but it took a while to find a position for the wire to maintain a stable connection. I suspect this may be why the device was bricked in the first place (disconnect when flashing rom/kernel/etc.)
Anyways, for some reason flashing the stock recovery to the phone was just not working. The guy on reddit recommended trying TWRP, and that worked immediately. However, at that point, I had no idea what the history of the phone was or what OS was on it before, what firmware it had. I tried installing the official CM13 and then Sultan's CM13 with no luck. What *did* work was Oxygen OS 2.2.6.
At this point I'm stuck yet again though... The Marshmallow OTA (3.1.3) in the OS shows as available for download, but when I try to install the download only gets to 22% and then stops. Flashing the 3.1.3 OTA.zip available on OnePlus' support site doesn't work in TWRP, and when I try to flash stock recovery, it doesn't work.. don't know what else to try.
AndriyEtch said:
Hi! Thank you for your reply
I posted this same question on the /r/oneplus subreddit, and received a quick and helpful walkthrough. Turns out part of the problem was that the micro-usb port on the phone itself is a bit unreliable. I haven't investigated too deeply, but it took a while to find a position for the wire to maintain a stable connection. I suspect this may be why the device was bricked in the first place (disconnect when flashing rom/kernel/etc.)
Anyways, for some reason flashing the stock recovery to the phone was just not working. The guy on reddit recommended trying TWRP, and that worked immediately. However, at that point, I had no idea what the history of the phone was or what OS was on it before, what firmware it had. I tried installing the official CM13 and then Sultan's CM13 with no luck. What *did* work was Oxygen OS 2.2.6.
At this point I'm stuck yet again though... The Marshmallow OTA (3.1.3) in the OS shows as available for download, but when I try to install the download only gets to 22% and then stops. Flashing the 3.1.3 OTA.zip available on OnePlus' support site doesn't work in TWRP, and when I try to flash stock recovery, it doesn't work.. don't know what else to try.
Click to expand...
Click to collapse
Root your device using twrp or kingoroot method then install flashify and try to flash stock recovery using flashify. .. Tht may work.
Flashing 3.1.3 via official twrp ll not work... Cos ur bootloader version, U can do it only with stock recovery or u need to edit meta data file. Or u can flash stock recovery img file by twrp
cva_kabil said:
Root your device using twrp or kingoroot method then install flashify and try to flash stock recovery using flashify. .. Tht may work.
Flashing 3.1.3 via official twrp ll not work... Cos ur bootloader version, U can do it only with stock recovery or u need to edit meta data file. Or u can flash stock recovery img file by twrp
Click to expand...
Click to collapse
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
AndriyEtch said:
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
Click to expand...
Click to collapse
I dont think so... I hv not tried... But as of i know if u edit it wrongly, u will not be able to flash that file. . Try others methods first... Hope it works
AndriyEtch said:
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
Click to expand...
Click to collapse
Hi OP, sorry for joining late to the party
So the thing is the OnePlus X is at opposites now since the official MM release on 29th September. The thing is if you are running the old bootloader (OxygenOS 2.x.x) or any ROM based on it, then the New TWRP will not boot, neither will the Stock Recovery that is hosted on the OnePlus download section for the X, which is where i assume you download the stock recovery from, right ? Also note that the official recovery hosted on the TWRP website is also yet to be updated, we're working on that.
So you are on the old Bootloader. Simple stuff. I have posted my guide a lot of time around the forums, its gained a lot of merit. You could follow it for your update process. I'll leave a link below. In case you wanna verify that the old bootloader is causing the issue my Index Thread pinned in the general section has a link for the Stock recovery for Old bootloader, try flashing that via fastboot, if it successfully boots then you're set.
Comprehensive guide to Update to Marshmallow Bootloader
The above guide is centered to the thread i have posted it on but the process is 99% the same. In the end, you could just stay with Oxygen OS 3.1.3, or flash any custom ROM based on the new Bootloader.
Now regarding your query about editing the META of the ROM, well Yes to an extent it IS risky if you ain't careful because my guide guides you to delete the one single line that removes the device check, so as long as you use the modified zip on OnePlus X only, there will be no issues.
Let me know for any further clarifications, also you're welcome to join our support group on Telegram, all of our developers are active there. Ping me (@ mellogang_unite) for an invite
So I need help getting a friends phone back to stock. using odin and have tried flashing several different versions of the firmware keep throwing and error for rev check (system) odin fails everytime its gets to the system part of file. also smart switch will not recognize device. only have download mode and stock recovery as of now.
future612 said:
So I need help getting a friends phone back to stock. using odin and have tried flashing several different versions of the firmware keep throwing and error for rev check (system) odin fails everytime its gets to the system part of file. also smart switch will not recognize device. only have download mode and stock recovery as of now.
Click to expand...
Click to collapse
I don't have this device but, the following thread may be what you are looking for.
https://forum.xda-developers.com/showthread.php?t=3550669
If all else fails, your best bet is to post your question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3489011
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
First off, im pretty new to samsung phones. i got a N950F which i installed TWRP on today since i heard it was a helpful thing if you wanted to root, and since i just came from a jailbroken iphone i thought why not. i followed all the guides and made a backup before i did wipe, but now im stuck on the boot screen. i have tried re-installing the firmware but it just says "SW REV. CHECK FAIL. DEVICE: 2. Binary: 1." and fails. any links or videos woul be helpful since i dont want to pay money if i can fix it myself. im using Odin3 v3.13.1 with the firmware file called "N950FXXU1AQI1_N950FOXM1AQHF_BTU_7.1.1_FULL" i can enter download mode and twrp but it can not boot, it reaches the samsung logo and then restarts every 3 seconds. Please help!
Fround said:
First off, im pretty new to samsung phones. i got a N950F which i installed TWRP on today since i heard it was a helpful thing if you wanted to root, and since i just came from a jailbroken iphone i thought why not...
Click to expand...
Click to collapse
I don't have this device but, I believe that one or more of the following threads may be helpful for what you need and don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3715261
https://forum.xda-developers.com/showthread.php?t=3677038
https://forum.xda-developers.com/showthread.php?t=3674486
https://forum.xda-developers.com/showthread.php?t=3780913
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Okay so I am not completely noob on Android but man Motorola is hard cake.
I have Moto g turbo edition running lineage os 14. Which is consuming battery like crazy and I wanted to go back to stock rom mm.
Now as any guy would do I downloaded stock file for my device from XDA and tried following the fastboot instructions which gives preflash validation error. So on skipping the got.bin didn't help and almost all command came with same error. I tried RSD tool and all in one Moto tool with no success whatsoever.
And now phone is acting weird like it starts on bootloader and have to press Start button for it to start(but it is starting and working though).
The phone is only in India and Mexico maybe so it's hard to find device specific instructions. Though what I've found that the flashing guide asks to wipe data with stock recovery! I didn't get that. So for following instructions do I need to first get stock recovery and than wipe everything ? I didn't tried it because than I'll get into deep trouble of nandroid backup restoration if everything goes to sh*t. Please help I'll provide any help needed .thank you very much
unrefusableoffer said:
Okay so I am not completely noob on Android but man Motorola is hard cake...
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2542219
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
I am looking for a custom rom, minus the Google stuff, that will work on my Ulefone Armor X Oreo 8.1. I have a working TWRP recovery and have rooted it via Magisk but went back to stock after a few nagging problems.
The phone spec isn't wonderful so need something lighter but still having plenty of functionality.
Cheers
Charlie-Boy said:
I am looking for a custom rom, minus the Google stuff, that will work on my Ulefone Armor X Oreo 8.1......
Click to expand...
Click to collapse
This specific device and Chipset is fairly new and there's very little on the forum that's specific to your device.
With that stated...
You have a Mediatek MT6739 (64 Bit) device that can be very helpful in that aspect.
Though I had located a few threads that won't be very helpful for you but, the following thread is about the best that your possibly going to find for your device at this point in time.
https://forum.xda-developers.com/showthread.php?t=2701283
It does take some time for developments to pop up on the forum for newer Mediatek Chipsets but, where there's a developer (with the same Chipset device), there's always a way depending on the level of difficulty.
I wish you the best of luck with your search!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Charlie-Boy said:
I am looking for a custom rom, minus the Google stuff, that will work on my Ulefone Armor X Oreo 8.1. I have a working TWRP recovery and have rooted it via Magisk but went back to stock after a few nagging problems.
The phone spec isn't wonderful so need something lighter but still having plenty of functionality.
Cheers
Click to expand...
Click to collapse
I'm also looking for that. But if I can get TWRP on it I'd probably try SU.
How did you get to install the TWRP? I found a few posts but was apprehensive about whether I can use SPFT to flash original stock ROM if things go wrong. I suppose that would be the easiest way.
For what I paid for the phone, it's a decent enough device.
Using SD card as internal memory always result in the total capacity being reported wrongly..256GB becomes 512GB with 50% occupied, 200GB becomes 256GB with 64GB occupied. Still waiting for their tech support to reply but unlikely they would.
Cheers!
I have rooted it several times and flashed the stock image several times too without a problem. Haven't used SU though I used Magisk.
.stupdroid.com/2018/07/Ulefone-Armor-X-root-twrp-.html
I do not have your issue with storage but my wireless charging mat today stopped charging but still lights up. Phone will still charge via cable. Trying to get a replacement mat.
I installed using SP flash tools on windows and Linux just to see the difference.
If you do a Google for Install TWRP ulefone armor x then you will get some information and relevant files.
Unlocking the bootloader via ADB is straightforward on Windows and Linux too. And then relocking it.
Regards
Charlie
Ibuprophen said:
This specific device and Chipset is fairly new and there's very little on the forum that's specific to your device.
With that stated...
You have a Mediatek MT6739 (64 Bit) device that can be very helpful in that aspect.
Though I had located a few threads that won't be very helpful for you but, the following thread is about the best that your possibly going to find for your device at this point in time.
https://forum.xda-developers.com/showthread.php?t=2701283
It does take some time for developments to pop up on the forum for newer Mediatek Chipsets but, where there's a developer (with the same Chipset device), there's always a way depending on the level of difficulty.
I wish you the best of luck with your search!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks for the input I will have a read.
Charlie-Boy said:
I have rooted it several times and flashed the stock image several times too without a problem. Haven't used SU though I used Magisk.
.stupdroid.com/2018/07/Ulefone-Armor-X-root-twrp-.html
I do not have your issue with storage but my wireless charging mat today stopped charging but still lights up. Phone will still charge via cable. Trying to get a replacement mat.
I installed using SP flash tools on windows and Linux just to see the difference.
If you do a Google for Install TWRP ulefone armor x then you will get some information and relevant files.
Unlocking the bootloader via ADB is straightforward on Windows and Linux too. And then relocking it.
Regards
Charlie
Click to expand...
Click to collapse
Thanks for the info.
Cheers!
chooks06 said:
Thanks for the info.
Cheers!
Click to expand...
Click to collapse
No problem.
Charlie-Boy said:
I am looking for a custom rom, minus the Google stuff, that will work on my Ulefone Armor X Oreo 8.1. I have a working TWRP recovery and have rooted it via Magisk but went back to stock after a few nagging problems.
The phone spec isn't wonderful so need something lighter but still having plenty of functionality.
Cheers
Click to expand...
Click to collapse
Where did you get the TWRP for Ulefone Armor X. I've been trying to search it all over and haven't found anything. If possible can you please share a link? TIA
abhijeet715 said:
Where did you get the TWRP for Ulefone Armor X. I've been trying to search it all over and haven't found anything. If possible can you please share a link? TIA
Click to expand...
Click to collapse
Code:
https://www.needrom.com/download/twrp-armox-x/
There are other places listed on Google.
Anyone had this in recovery mode?
Had also tried flashing the TWRP but it just didn't stick and was asking for a password on first launch.
Edit.. all links I tried point to the same location to download. Same files.
chooks06 said:
Anyone had this in recovery mode?
Had also tried flashing the TWRP but it just didn't stick and was asking for a password on first launch.
Edit.. all links I tried point to the same location to download. Same files.
Click to expand...
Click to collapse
im also facing the same issue... kindly someone help.. ive explained my issue below:
Can someone confirm? My device is encrypted by default, so whenever i install TWRP it says to decrypt device. I tried the pattern, changed it to password, and pin still my device doesnt decrypt in twrp. I feel its a twrp bug, because when i set the device to ask pattern during boot, the same pattern/pin/password is accepted, but not in twrp.
I want to know 3 things:
1. Are your devices encrypted by default (i dont remember encrypting my device, I dont know how it is encrypted)
2. Are you facing this same issue of entering password when you reboot into recovery?
3. What is the purpose of the boot.img in the twrp zip? am i required to flash it before flashing the recovery, or does it remove encryption?
Charlie-Boy said:
I am looking for a custom rom, minus the Google stuff, that will work on my Ulefone Armor X Oreo 8.1. I have a working TWRP recovery and have rooted it via Magisk but went back to stock after a few nagging problems.
The phone spec isn't wonderful so need something lighter but still having plenty of functionality.
Cheers
Click to expand...
Click to collapse
Charlie, could share how you got the TWRP working?
Have been fiddling around until battery showed -1%.. Had to go back to stock.
Thanks mate!
Choo ks
In the folder containing the TWRP recovery there are 3 files, boot.img, scatter, and recovery. You only flash recovery, you have flashed the boot image, ensure the checkbox is unticked after loading from scatter in SP tools. That is what I think you have done to get that result.
Follow the guide here. I did it a few times before success as I followed a guide from another site.
https://www.stupdroid.com/2018/07/Ulefone-Armor-X-root-twrp-.html
Click to expand...
Click to collapse
I think I installed magisk using this method, clearing dalvik and cache.
https://www.stupdroid.com/2018/02/magisk-16.0-download.html
Click to expand...
Click to collapse
Charlie-Boy said:
In the folder containing the TWRP recovery there are 3 files, boot.img, scatter, and recovery. You only flash recovery, you have flashed the boot image, ensure the checkbox is unticked after loading from scatter in SP tools. That is what I think you have done to get that result.
Click to expand...
Click to collapse
That's what I did, using the downloaded scatter file. Was experimenting.
---------- Post added at 06:49 PM ---------- Previous post was at 06:44 PM ----------
Charlie-Boy said:
Follow the guide here. I did it a few times before success as I followed a guide from another site.
I think I installed magisk using this method, clearing dalvik and cache.
Click to expand...
Click to collapse
Used the same guide. But TWRP came up with the decrypt data issue.
Did you have that issue?
chooks06 said:
Anyone had this in recovery mode?
Had also tried flashing the TWRP but it just didn't stick and was asking for a password on first launch.
Edit.. all links I tried point to the same location to download. Same files.
Click to expand...
Click to collapse
You ignore the password and change the language to English from Russian. Just don't enter a password at all. The recovery won't stick as Android replaces it when you reboot. After you've completed other steps maybe OEM unlocking then it stays, or so I read somewhere.
chooks06 said:
That's what I did, using the downloaded scatter file. Was experimenting.
---------- Post added at 06:49 PM ---------- Previous post was at 06:44 PM ----------
Used the same guide. But TWRP came up with the decrypt data issue.
Did you have that issue?
Click to expand...
Click to collapse
All of them are encrypted by default now. The password in TWRP should be ignored and just change the language and select storage etc.
abhijeet715 said:
im also facing the same issue... kindly someone help.. ive explained my issue below:
Can someone confirm? My device is encrypted by default, so whenever i install TWRP it says to decrypt device. I tried the pattern, changed it to password, and pin still my device doesnt decrypt in twrp. I feel its a twrp bug, because when i set the device to ask pattern during boot, the same pattern/pin/password is accepted, but not in twrp.
I want to know 3 things:
1. Are your devices encrypted by default (i dont remember encrypting my device, I dont know how it is encrypted)
2. Are you facing this same issue of entering password when you reboot into recovery?
3. What is the purpose of the boot.img in the twrp zip? am i required to flash it before flashing the recovery, or does it remove encryption?
Click to expand...
Click to collapse
Yes all are encrypted.
Yes I get the same request for password which I ignored and selected language and carried on.
I do not know why boot.img is included it just gets in the way.
After installing TWRP unlocking OEM bootloader and all the rest including rooting it I decided it would be better to wait for a new ROM. All we need is a working TWRP and an unlocked bootloader to flash a new ROM and we have that. It doesn't work very smoothly and I felt it could be better which is why I went back to stock.
When I posted this request I didn't imagine others would try installing Magisk etc, waste of time really as you won't stay with it either. Best wait for a ROM I think.
Charlie-Boy said:
Yes all are encrypted.
Yes I get the same request for password which I ignored and selected language and carried on.
I do not know why boot.img is included it just gets in the way.
After installing TWRP unlocking OEM bootloader and all the rest including rooting it I decided it would be better to wait for a new ROM. All we need is a working TWRP and an unlocked bootloader to flash a new ROM and we have that. It doesn't work very smoothly and I felt it could be better which is why I went back to stock.
When I posted this request I didn't imagine others would try installing Magisk etc, waste of time really as you won't stay with it either. Best wait for a ROM I think.
Click to expand...
Click to collapse
Im also unlocked and flashed twrp. I ignored the encryption message and proceeded, hit the storage sizes show 0, and neither can i access the storage to flash anything nor can i take backups. can you go to settings>security in your device, and tell me if your encryption says enabled? Tia
abhijeet715 said:
Im also unlocked and flashed twrp. I ignored the encryption message and proceeded, hit the storage sizes show 0, and neither can i access the storage to flash anything nor can i take backups. can you go to settings>security in your device, and tell me if your encryption says enabled? Tia
Click to expand...
Click to collapse
Mine is the same encryption is enabled. I select external SD storage and I am shown the contents using the same procedure as yourself, I cannot tell you why this is so. I am using the same technique, same phone, same settings, same TWRP, maybe we have different SD card?
That is all I can think of by way of an explanation. It works perfectly for me. I also made a backup which I can select and restore without a problem.