Hi all!
I have a problem with my mi6: at the moment the mi6 is empty, no os, only recovery.
When i try to flash a recovery goes well and i can reboot in the recovery as well but:
-When i try to transfer file via twrp mtp, the process won't end, and windows dosn't show any process.
-If i try to sideload anything, the process stops at 47% without any error.
-If i try to flash, i also get the invalid "sparse file format at header magi"
I have all the drivers installed (qualcomm, android, adb).
I've an exam soon, and i truly need the phone, wich are your suggestions?
Solved.
Related
Okay, so my phone's label is "P700" from "LG", I was flashing my rom with all the sucess to slimroms, but I decided to try a new one and basically I went to recovery options, deleted the /system and /data, what I didn't know is that /data is my sdcard, after doing that I was pretty much stuck in recovery mode, then I clicked on sideload and I was stuck in sideload, trying doing sideload from windows, but adb didn't recognize it, now after restarting my phone and plugging it into windows for 4 hours straight and downloading drivers, my adb finally see's it, once the adb started seeing it - I reboteed my phone into recovery because before it didn't work, anyway I end up with blank screen, and before I had just LG logo, now after putting the battery out and inside - my phone causes every windows system to restart with the error - IRQL_NOT_LESS_OR_EQUAL, maybe some of you experienced this, maybe not, I was wondering if I could somehow format my phone, reinstall kernel, reinstall rom and recovery system from Ubuntu, since adb still recognizes it and I think it won't crash Ubuntu.
Hello, I'm a little bit new to all this, so any help and detailed instructions are very very helpfull.
So I have Gigabyte GSmart Aku A1 device (MediaTek 6589), I don't know if it's bricked or what but apparently is not working quite well.
When I turn on my phone, it just loads and loads and loads and nothing happens (waited for about 4-5 hours), that was starting to happen after I somehow installed CWM on my device with some tutorial, CWM worked for the first time and after next reboot, it disappeared and stock recovery came back (and the problem with infinite loading screen - only showing logo).
I have ADB drivers installed, SDK aswell, tried to put stock firmware (got it from official site) and in like 1/4 of installation it says:
Code:
symlink: some symlinks failed
After that, I tried to install few versions that I downloaded from that official site, but same error again and again. (I tried to install with SD card and with ADB too. ADB is only working when I go to "apply update from ADB" in recovery. I have also used 2 different types of SD cards.)
That didn't worked either, so I got to some russian forum, and using google translator I downloaded 5-6 types of custom ROM's / Firmwares. That didn't worked either, one time when installing one of those ROM's - it said something about signature..
After that I was trying to install those ROM's with ADB and with SD Cards aswell, but turns out that every single time I get error saying: "Installation aborted.".
I have ofcourse tried to wipe data/factory and to wipe cache too, but nothing helps..
Also, when I'm in ADB console, when I type any command besides adb sideload or adb devices, I get error saying: "error: closed". I cant get into fastboot with adb console.
I really don't know what to do anymore, so any help would be very very appreciated. Thank you for your help in advance, if you need any videos, pictures or something, just tell me.
Edit: When I go to "wipe data/factory reset" in recovery, it says: "Mount /data error.".
BUMP!
BUMP^2!
luuksa said:
BUMP^2!
Click to expand...
Click to collapse
i would look for stock rom in form of full mtkdroidtools backup and preloader drivers for your mtk chipset
and flash it using flashtool (it uses preloader[you can determine if it's available/undamaged by turning phone off and opening device manager on pc and plugging phone to pc if there will be a flash in device manager before the charging starts it will flash ])
Hello,
I am having a big issue with my Sony Xperia Z2 Tablet. I tried to install a new rom on it and I am stuck in the recovery step.
I achieved to unlock the phone, install the fastboot drivers and flash the boot of my device. I can access to the CWM-based Recovery v6.0.5.1 menu but I just can't put the new rom in my /sdcard/xx directory.
I've tried to use the "adb push cm-11-....-windy.zip /sdcard/0/" command line, but I receive the message: "error: device not found".
I then check the command "adb devices" and indeed the device is not listed even though the device is connected. I then tried to reboot the device (after wiping the data/factory reset, cache partition and dalvyk cache, but my tab is not rebooting on anything. I have nothing but the wave background. Once the device got at that stage, the "adb devices" commande shows the following message: CB51xxxxxx unauthorized. It looks like I have a driver problem or something similar, but I tried to install different drivers and nothing worked so far.
So from there, I am lost, I can't boot my system with the original rom and I can't transfer any new rom in the memory to install a new one.
I would appreciate it a lot if anyone could give me some leads on how I could transfer the new rom on my device or at least recover the original sony firmware so that I can use my tablet again.
Thank you for your answers and time
P.S. I also tried the slideloader option, but since it seems to work on the adb program, it's not working either.
Solved
¨Djyinks said:
Hello,
I am having a big issue with my Sony Xperia Z2 Tablet. I tried to install a new rom on it and I am stuck in the recovery step.
I achieved to unlock the phone, install the fastboot drivers and flash the boot of my device. I can access to the CWM-based Recovery v6.0.5.1 menu but I just can't put the new rom in my /sdcard/xx directory.
I've tried to use the "adb push cm-11-....-windy.zip /sdcard/0/" command line, but I receive the message: "error: device not found".
I then check the command "adb devices" and indeed the device is not listed even though the device is connected. I then tried to reboot the device (after wiping the data/factory reset, cache partition and dalvyk cache, but my tab is not rebooting on anything. I have nothing but the wave background. Once the device got at that stage, the "adb devices" commande shows the following message: CB51xxxxxx unauthorized. It looks like I have a driver problem or something similar, but I tried to install different drivers and nothing worked so far.
So from there, I am lost, I can't boot my system with the original rom and I can't transfer any new rom in the memory to install a new one.
I would appreciate it a lot if anyone could give me some leads on how I could transfer the new rom on my device or at least recover the original sony firmware so that I can use my tablet again.
Thank you for your answers and time
P.S. I also tried the slideloader option, but since it seems to work on the adb program, it's not working either.
Click to expand...
Click to collapse
I found a solution, I flashed my tablet with flashtool and a working ftf file. Then I could have my tablet running the original sony rom and finally I could transfer the cyanogen rom into the tab. Everything is running fine now.
I recently failed to deodex my stock rom on my Galaxy A3 (a300fu) and while i was formatting dalvik cache and cache with TWRP i saw "system" option so i formatted that too cause i was gonna reflash my stock rom anyway because the deodexing didn't work. So after that it failed to connect my phone to my PC. An error comes up saying "USB device not recognized".
Note:
I have failed to deodex my rom twice before and reflashed several times with no problems so that doesn't have anything to do with windows not recognizing my device. Its only after i formatted the "system" option with TWRP do i have "USB device not recognized" on windows.
Also, i can still access TWRP and download mode on my phone. (but what use it that when i cant connect my phone to my PC)
Can someone please resolve this issue for me? Thanks
Hi I have moto G 2015 osprey XT1541, its unlocked running cyanogenmod
I recently upgraded to CM 14 experienced problems instantly, all the google apps wpuld crash.
Reverted back to CM 12 which worked and it had an error whilst upgrading in recovery,
something like
E:Failed to map file
E:Error exit from the fuse process :0
Installation Failed Installation Aborted
I have tried multiple roms, all come back with same error message. The recovery on the phone is the cyanogenmod one. Also in recovery if I do system reset I get
E: Failed to mount /data (permission denied)
I am having to try installing roms via sdcard as the phone is not recognised by my computer.
Any Ideas?
I would format userdata in bootloader then install TWRP and use that to install the next rom.
es0tericcha0s said:
I would format userdata in bootloader then install TWRP and use that to install the next rom.
Click to expand...
Click to collapse
How do I format userdata? I dont have that option in the bootloader. When I try to install anything using cyanogemod recovery including TWRP I get the same error message.
fastboot format userdata
fastboot format cache
If that doesn't work then you'll want to go back to complete stock with the original firmware for your variant (and carrier if yours came from one originally).
The phone cannot connect to PC with USB for some reason. So I cant use fastboot. I know its not the cable/PC as it works with my tablet so must be the phone.
I have tried wiping data and factory reset in recovery and this does not solve the problem, still stuck in boot loop and recovery cannot flash any roms.
AndyGLowe said:
The phone cannot connect to PC with USB for some reason. So I cant use fastboot. I know its not the cable/PC as it works with my tablet so must be the phone.
I have tried wiping data and factory reset in recovery and this does not solve the problem, still stuck in boot loop and recovery cannot flash any roms.
Click to expand...
Click to collapse
Check out the Device Manager (assuming you're using Windows...) and see if the driver is loading correctly. If not, you should be able to manually update the driver. This is the most common problem that would cause this. Even if the phone is borked, fastboot mode should work and the PC should be able to load the drivers. If that fails, try other ports on your PC or another PC altogether.
Uninstall all the Moto drivers, reboot, reinstall and look into RSD Lite if all else fails.
es0tericcha0s said:
Check out the Device Manager (assuming you're using Windows...) and see if the driver is loading correctly. If not, you should be able to manually update the driver. This is the most common problem that would cause this. Even if the phone is borked, fastboot mode should work and the PC should be able to load the drivers. If that fails, try other ports on your PC or another PC altogether.
Uninstall all the Moto drivers, reboot, reinstall and look into RSD Lite if all else fails.
Click to expand...
Click to collapse
I doesn't even show in Device Manager, I have tried another system with Win 7 on and that comes up with a notification saying a unrecognised device has been attached. But it doesn't make a difference if you install the drivers or look in device manager, had exclamation mark next to device but you cant do anything. I also have Ubuntu dual loaded on this system and that doesn't recognise it either.
Same issue on Xperia ZL... This CM14 ruined my phone.. exactly same issue... Some one help plzzzzzzzzzzzzzzzz
sahil soni said:
Same issue on Xperia ZL... This CM14 ruined my phone.. exactly same issue... Some one help plzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
did you guys solve your problem I have the same exact issues?