My twrp 3.2.1-0 is constantly crashing while i'm trying to install/flash any rom. I don't know what just happened. I actually tried to install chris bal greece's lineage os experimental and also installed his version of twrp but it crashed then, so I had to revert back to my own twrp and i'm facing the problem now also. please someone help, and do something quickly. I'm in India so technically there is no service center. You guys are my last hope. It's the only device I have got in my whole house. I hope you guys understand my problem and help me.
Format all data in TWRP then try to flash another ROM via ADB sideload. You can easily google it, how that works...
Heyyo, before installing a ROM from EUI ROM? I always recommend having a PC handy or a usb drive with the ROM and gapps and firmware of choice and then go into TWRP > wipe > format data > yes.
Next reboot to recovery and wipe dalvik, system and cache and then reboot to recovery again.
Then copy firmware, ROM and gapps to your phone and flash firmware, ROM then gapps and then reboot to system.
For TWRP version? Please ensure for CBG TWRP you have the version with quota support.
Related
Hello guys,
I wanted to flash Cyanogen 13.0 on my OPX. I followed the instructions on the Cyanogen-Downloadsite, but after flashing with TWRP I always stucking at the bootlogo....
I waited more than 30 min, but nothing happens... While flashing I get no errors or warnings.... It seems to be alright...
Then I tried another Marshmallow ROM, but I get always the same issue...
Thank you in adavance!
need more info dude, what rom were you before the issue presented itself ? recovery version ? data, cache & system formatted to which filesystem ? what did you wipe ? what all did you flash with or after the rom ?
hi
asuming u have opened bootloader and have installed twrp this is what i do
1.put the rom and gapps on the root of the phone storage
2. factory/data rest in twrp
3.flash rom via twrp
4.clean chache/delvi
5.flash gaaps
6.clean cache/delvi again
reboot system and im good to go try this do a full flash the way i have mentioned dont do a dirty flash
im sure u will succeed good luck
If you didn't unlock the bootloader then it will not boot anything other than the stock OS.
Hi,
I recently unlocked my bootloader after a really long time. I then proceeded to flash twrp and then flashed superSU and rooted my phone. I took a backup of my rom and then proceeded to install RR 5.8.4. I was given a error 7. Tried this method (https://forum.xda-developers.com/showthread.php?t=2522762) but then it gave me a error 6. Would someone help me out ?
Thx.
1) flash latest global developer MIUI ROM via MiFlash to updated firmware and to reset things if they messed up (watch out if you lock your bootloader while flashing, choosing the wrong .bat file);
2) after flash TWRP via fastboot;
3) boot TWRP and "advanced wipe" ALL partitions (except MicroSD if you have a MicroSD inserted and you want to keep its data);
4) reboot to recovery and install the RR .zip file (and the gapps .zip file if you use it);
5) after you boot into RR, you can then reboot to TWRP and install Magisk .zip to get root and other nice things.
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
shalom170401 said:
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
Click to expand...
Click to collapse
If you've TWRP installed at the moment then try this :
Boot to TWRP
Take a nandroid backup (just incase)
Wipe > advanced wipe > swipe to confirm
Flash firmware if you're coming from marshmallow based MIUI
Flash ROM & Gapps
Reboot
If you still get errors, probably corrupted zip. Try Re-downloading the zip.
shalom170401 said:
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
Click to expand...
Click to collapse
You can try. Remember that if you download the full MIUI ROM, you should follow this guide http://en.miui.com/a-234.html
You can also upgrade the firmware without downloading the full ROM, from here https://forum.xda-developers.com/re.../firmware-firmware-update-2017-08-04-t3651537
Will try soon and reply
Even after flashing the firmware, i get the same error 7
I have downloaded this rom (https://www.google.co.in/amp/s/foru...nt/rom-resurrectionremix-5-8-2-t3567023/amp/) and flashed twrp using this guide (http://en.miui.com/thread-536180-1-1.html)
Maybe this is a stupid question, but your phone has MediaTek chipset or Qualcomm chipset?
I'm pretty sure it is qualcomm as the cpu speed is 2.0ghz
Now, i get this error and status error 7.
What should i do?
Where you can format all partitions, you can fix them too.
It looks like your /data is using f2fs, you should fix it converting the partition in ext4 (in official TWRP it's not possible to use f2fs).
Check all partitions, not only /data, to be formatted as ext4
So, what r the steps i should follow?
And btw, is there any unofficial twrp which i could use?
Enter TWRP, choose Wipe > Advanced Wipe
Check the box for "data"
Tap "change or repair file system"
Tap "Change file system"
Tap "ext4"
Swipe the button
Repeat for other partitions
I don't know if there are unofficial TWRP that support f2fs. Probably they exists, but you should also check if the default RR kernel supports f2fs, else you have to flash a custom kernel that supports f2fs.
Just one important question. During this process, if something weird happens ( like i get my phone soft bricked) and i got a nandroid backup. Will i be able to flash it successfully using twrp?
Yes, changing file system is a pretty safe operation (except for the erasing of the data inside the partition, as a normal format).
Flashing the backup or a full fastboot image will reset things back.
But it already shows it as ext4
Oh mahn, it still doesn't resolved?
Flash official TWRP via fastboot mode, skip this step if your already on official TWRP
Boot to TWRP
Wipe
Flash cm14.1 mido firmware
Flash Rom
Flash Gapps
??
Reboot
Note that, you should try Re-downloading all the things, like Rom / Gapps
Dude, i am unable to flash the rom due to cant install this package error and status error 7 !
shalom170401 said:
Dude, i am unable to flash the rom due to cant install this package error and status error 7 !
Click to expand...
Click to collapse
Yeah man, that's what I'm saying, you should try installing cm14.1 firmware first, then Rom..
Even after flashing the firmware, i get the same errors
So here is my situation: I have a 3GB kenzo model with 6.3.24 EU ROM and ZCX TWRP 3.0.0-0. Of course bootloader in unlocked. Since the TWRP is pretty old, I updated it to RedWolf V3.1.
What I did:
Wipe: Dalvik/System/Data/Cache
Install Beta 7.9.22 or Stable 8.5.6.0 Kenzo firmware (tried with both)
Install RR image: RR-N-v5.8.5-20170924-kenzo-Final.zip
Install open gapps ARM64 7.1 (or not)
Wipe caches (also tried without wiping it)
Reboot
Bootloop
I know the first boot can take some time, so I let it run for 30+ minutes, still, only bootloop happened. Tried it a couple times, changing firmware, wiping caches at the end, ditching gapps etc. Images checked for md5 checksum on the phone, they are not corrupted. I was able to restore the EU ROM, but I really want to try out ResurrectionRemix. What could possibly the problem be?
Same here...i flash all nougat rom and got bootloop..now i stay in mm only...:C
Reflash newest stock image, than hack the emmc bootloader of it and try again
reemar said:
Reflash newest stock image, than hack the emmc bootloader of it and try again
Click to expand...
Click to collapse
So you mean to flash the latest stock ROM, won't it remove TWRP and lock the bootloader? And how to "hack" the emmc bootloader? Sorry, I'm a newbie
Just wait for at least 15 minutes after flashing
DdroidTHEGAMER said:
Just wait for at least 15 minutes after flashing
Click to expand...
Click to collapse
What do you mean, wait in TWRP for 15 minutes or when booting up the OS? As I said, I waited for 30+ minutes while it booted up.
Try installing ROM without flashing the firmware
Minions007 said:
Try installing ROM without flashing the firmware
Click to expand...
Click to collapse
That was the first thing I did (I didn't know a firmware was needed so I only flashed the RR ROM). Same bootloop
You could try to format data partition. Then wipe system,data,cache,dalvik cache and internal partition. After that Copy actually firmware, rom and opengapps arm64 pico in internal memory (Download all files again. Maybe archiv was damaged). Then flash firmware, rom, gapps and do wipe Cache/dalvik and reboot. Then report.
SpeRator said:
You could try to format data partition. Then wipe system,data,cache,dalvik cache and internal partition. After that Copy actually firmware, rom and opengapps arm64 pico in internal memory (Download all files again. Maybe archiv was damaged). Then flash firmware, rom, gapps and do wipe Cache/dalvik and reboot. Then report.
Click to expand...
Click to collapse
Did it, same result. Wiped everything, copied zips to internal storage, flashed from there and boom, bootloop
Hmm strange. You could test a good modified rom of rr.
Try this Rom:
https://www.androidfilehost.com/?fid=673791459329049490
And these Gapps:
https://www.androidfilehost.com/?fid=673791459329049438
If it all not Work, you have to flash actually official Rom to restore all with edl.
I have the exact same problem. Cant flash any ROM without getting bootloop. The bootloop though isnt a standard one, i think. I get the logo of the ROM and the phone starts to give Tiny vibrations in regular periods of time. I also left the phone for a long time hoping it'll eventualy boot. No luck. Tried flashing stock ROM with miflashtool and edl. Didnt help as well. I wonder if it could be the fault of any previous roms i had installed.
Twrp:
-are you sure you are not in read mode? Change to writemode.
-All relevant partitions mounted?
SpeRator said:
Twrp:
-are you sure you are not in read mode? Change to writemode.
-All relevant partitions mounted?
Click to expand...
Click to collapse
Changed to writemode.. default options selected in the mounts screen.
unable to flash any Nougat roms- stuck in boot animation.
is it because the bootloader was unlocked unofficially via lollipop fastboot ROM 7.1.8??
All right, got it working.
I flashed the latest official MIUI ROM with the official flashing tool with the option "clear all". Then I had to open the bootloader again, then flash TWRP, then flash RR, and it works! Looks like something was wrong with the previous installation, the clearing everything did the job.
Were your bootloader unlocked officially?
aldhi said:
Were your bootloader unlocked officially?
Click to expand...
Click to collapse
Unlocked Unofficially via this method https://www.youtube.com/watch?v=2FmaCdnLi58
tonyrulez said:
So here is my situation: I have a 3GB kenzo model with 6.3.24 EU ROM and ZCX TWRP 3.0.0-0. Of course bootloader in unlocked. Since the TWRP is pretty old, I updated it to RedWolf V3.1.
What I did:
Wipe: Dalvik/System/Data/Cache
Install Beta 7.9.22 or Stable 8.5.6.0 Kenzo firmware (tried with both)
Install RR image: RR-N-v5.8.5-20170924-kenzo-Final.zip
Install open gapps ARM64 7.1 (or not)
Wipe caches (also tried without wiping it)
Reboot
Bootloop
I know the first boot can take some time, so I let it run for 30+ minutes, still, only bootloop happened. Tried it a couple times, changing firmware, wiping caches at the end, ditching gapps etc. Images checked for md5 checksum on the phone, they are not corrupted. I was able to restore the EU ROM, but I really want to try out ResurrectionRemix. What could possibly the problem be?
Click to expand...
Click to collapse
Backup all of your data from internal storage and flash latest fastboot developer ROM and setup it. This will fix all issues regarding ROMs, zips, bootloops and firmware and any other. After that flash latest ZCX recovery as RedWolf recovery causes problems for flashing ROMs and zips as per my experiance. Then simply flash RR and gapps and boot and wait for 15 minutes and till then don't restart device.
Okay. I am tired of constantly bricking and reinstalling my stock rom onto my Cubot. If not for Titanium Backup i would be so frustrated. So i have decided to ask for help with flashing the Phhusson ROM.
The problem i have is that i do not know the proper steps to install the ROM.
I have unlocked bootloader, installed TWRP, cleared cache, data, vendor, dalvik and installed system.img and magisk for root, but no luck.
I keep getting NO OS installed.
Anyone who successfully installed a CUSTOM ROM for their Cubot X18 Plus please give a tutorial here. Preferably a video tutorial. :good:
Also, if you have any pointers for restoring base band (i have tried flashing stock, copying emmc to root, having driver issues with magic box) i would love help on that but you can private message me if you wanna help (ill pay if you want to be paid, but not much)
You don have to whipe vendor because this is the base folder of the phone its like the kernel but in treble.
You habe to search a pre tested rom on cubot x18 pluss Like AOSP 9.0 from PHHUSSON on GitHub
i wish you good luck, im going to install it to in my cubot, and sorry for my english because im Chilean.
kene200 said:
Okay. I am tired of constantly bricking and reinstalling my stock rom onto my Cubot. If not for Titanium Backup i would be so frustrated. So i have decided to ask for help with flashing the Phhusson ROM.
The problem i have is that i do not know the proper steps to install the ROM.
I have unlocked bootloader, installed TWRP, cleared cache, data, vendor, dalvik and installed system.img and magisk for root, but no luck.
I keep getting NO OS installed.
Anyone who successfully installed a CUSTOM ROM for their Cubot X18 Plus please give a tutorial here. Preferably a video tutorial. :good:
Also, if you have any pointers for restoring base band (i have tried flashing stock, copying emmc to root, having driver issues with magic box) i would love help on that but you can private message me if you wanna help (ill pay if you want to be paid, but not much)
Click to expand...
Click to collapse
Hi, I was able to useflash phh GSI (works just great btw). This is how I ended up doing it:
1. Flash TWRP.
2. In TWRP you'll see errors due to the encryption of the partitions. To resolve this you have to format the userdata partition either with fastboot either with TWRP
3. After fixing the encryption problems in TWRP mount and transfer Magisk to the phone and flash it using TWRP.
4. Transfer the GSI image (A only) and flash it using TWRP. At this stage you could flash it with fastboot as well if you reboot to the bootloader, but don't boot into the system yet. As I said before I used PHH AOSP 9 GSI image.
5. Wipe using TWRP and reboot to system.
The first time I tried to flash it I used the stock recovery wipe function which wipes out the IMEI and stuff, this forced me to reinstall stock rom to set the IMEI with the MTK engineering tools and restart the whole process.
Hello, I now have 8 days note 10 lite today I unlocked bootloader, installed TWRP via adb after that I installed lineage os and wiping data etc. After that I faced a bootloop and lineageos bootscreen doesnt go away after 15 minutes.
So I tried to reflash the rom again, but twrp isnt able to reinstall the rom. I then used miflash to get original rom again.
Started all over installed twrp, flashed lineage os after this install after reboot I get everytime back into TWRP and looked on my pc and all files suddenly are encrypted on my phone and cant get lineage os rom again on my phone..
So I used miflash again and decided to ask here first. Does anybody know if I maybe use a wrong TWRP or missed a step?
I really dont understand it, I tried it for a 3th time. Here is exactly what I did.
- installed TWRP through ADB (TWRP-3.4.0-0_Android11_Roms_AndroidHQ254)
- In TWRP put rom on my internal storage
- Wipe Dalvik, data and cache
- Install rom (TWRP-3.4.0-0_Android11_Roms_AndroidHQ254)
- data wipe (where I had to type yes to confirm)
- Reboot to system and then it doesnt do anything and goes back into TWRP where I cant do anything, and I have to flash original rom back through MiFlash.
I run now MIUI 12.0.2
Android 10
Try using orangefox recovery. And i think you have to wipe data before installing rom, not after it.
ApexPrime said:
Try using orangefox recovery. And i think you have to wipe data before installing rom, not after it.
Click to expand...
Click to collapse
Thank you, I was able to do it with Orangefox.