I'm currently running LineageOS and don't want to flash stock unless I can get VoLTE. I've tried reading through posts but I'm still a bit confused as to whether it's available on stock Kiwi-24 or just stock Kiwi-22.
Thanks for the help.
I finally determined that it's not and kept my rooted ROM.
Related
I am fairly new to the whole ROM thing on this device. I have experience with older phones and am just getting back into this recently. That being said...
Current state is: Bootloader unlocked, currently running stock 4.4.4, Sense 6.0, Kernel 3.4.0-g931e842, Build 3.42.502.1 CL441323; ROM applied via RUU. (RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2)
Bottom line is that since I have attempted to root and flash ROMs I have had issues with making and/or receiving calls, or no SIM recognized at all, requiring S-off/firmware upgrades, etc.
I am looking for a stable build ROM which is compatible with the 4.4.4 firmware on my device which can be applied without obtaining s-off. Main goal is to be able to personalize the UI and to run a faster, debloated ROM.
Tried first using Renovate 5.0... could not receive calls on that one.
Removed. back to stock.
Next I found a Lollipop 5.0.1 ROM (HTC_One_M8_Lollipop_5.0.1LRX22C) which did not appear to require firmware updates... seemed to work great... except that I could not receive calls...
Removed... back to stock.
Next, I used ViperOneM8 and really liked it, but had to abandon once I was told by people that they were still getting sent straight to voice mail.
I did get some calls, so I tested having some people call me and it seemed fine... well turned out that during those tests I was on the 3G network... Once again, troubleshot down to the fact that anytime I was on 4G network I could not receive calls. Having had no way to change my network selection in this ROM (error was displayed when I attempted this). Contacted their support to confirm my issue. They are aware, no resolution available.
Removed... back to stock.
So my question is, are there any options OTHER THAN paying $25 to use Sunshine to get S-off, upgrade firmware? I am not a developer and I love my M8. I know there are people here who know exactly what I need and understand what I am looking for. Thanks in advance for any assistance.
GA_Android said:
Next I found a Lollipop 5.0.1 ROM (HTC_One_M8_Lollipop_5.0.1LRX22C) which did not appear to require firmware updates... seemed to work great... except that I could not receive calls...
Removed... back to stock.
Click to expand...
Click to collapse
I can't tell what ROM your are talking about based on that description. Possibly GPE stock rooted?
What I can tell you, is that most any Lollipop Sense ROM will have issues when used alongside 4.4.4 firmware.
Sense 4.4.4 ROMs will play well with your firmware, as will a number of 4.4.4 and 5.0 GPE and AOSP ROMs (that specifically state they support 4.4.4 firmware). However, when it comes to AT&T, there is more at play then whether the ROM corresponds to the firmware. That other complication is that AT&T does some annoyingly unique things with their network. In the past, this has included changes to build.prop and even the signal icons, which sometimes caused "international" custom ROMs to have some issues. And now you see that their HD Voice (Voice over LTE) is messing with some custom ROMs. As the other thread you posted in mentioned "blame AT&T".
Running an AT&T base 4.4.4 ROM is your best bet for trouble-free use on AT&T's network. WNC's ROM might fit the bill for what you want (debloated) and is often where I send folks that want a bug-free experience on AT&T (while retaining some AT&T specific features). The 3.28 version ROM is what you should try: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
There are other ROMs that might work for you. But the above is my suggestion, at least as a start.
redpoint73 said:
I can't tell what ROM your are talking about based on that description. Possibly GPE stock rooted?
What I can tell you, is that most any Lollipop Sense ROM will have issues when used alongside 4.4.4 firmware.
Sense 4.4.4 ROMs will play well with your firmware, as will a number of 4.4.4 and 5.0 GPE and AOSP ROMs (that specifically state they support 4.4.4 firmware). However, when it comes to AT&T, there is more at play then whether the ROM corresponds to the firmware. That other complication is that AT&T does some annoyingly unique things with their network. In the past, this has included changes to build.prop and even the signal icons, which sometimes caused "international" custom ROMs to have some issues. And now you see that their HD Voice (Voice over LTE) is messing with some custom ROMs. As the other thread you posted in mentioned "blame AT&T".
Running an AT&T base 4.4.4 ROM is your best bet for trouble-free use on AT&T's network. WNC's ROM might fit the bill for what you want (debloated) and is often where I send folks that want a bug-free experience on AT&T (while retaining some AT&T specific features). The 3.28 version ROM is what you should try: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
There are other ROMs that might work for you. But the above is my suggestion, at least as a start.
Click to expand...
Click to collapse
You are correct. It is a GPE stock rooted Lollipop ROM. It works just fine as long as I have 3G selected as my network, but it is just not as much flash as I wanted.
I am going to give the one you sited here a look and maybe give it a try. I appreciate your taking the time to reply. It was helpful and informative.
Erring on the Side of Caution
I'm in a similar quandry as the OP. I have lots of experience flashing ROMS on my older phones but trying to keep up with all the changes since getting my M8 has me confused.
Here's my current setup. I'm running Skydragon after trying the last 4.4 milestone of Liquidsmooth. I like both, but am interested in keeping up with the Lollipop guild.
I have Sunshine installed but when I ran it I found out I need to remove or disable Xposed Installer to continue. I'll deal with that by disabling it.
UPDATE: Well, that didn't work. Xposed was installed with the ROM and there's no option to uninstall it.
My biggest concern is updating the firmware. From my bootloader info, I'm assuming that I'm way behind on the latest firmware, but after reading so many threads about updating, my head is swimming.
If I need to update, I just want to make sure that I don't brick my phone.
CanuckinPA said:
I have Sunshine installed but when I ran it I found out I need to remove or disable Xposed Installer to continue. I'll deal with that by disabling it.
UPDATE: Well, that didn't work. Xposed was installed with the ROM and there's no option to uninstall it.
Click to expand...
Click to collapse
Return to stock ROM and stock recovery, for optimal configuration for sunshine to work. RUU is probably the easiest way to get back to stock. Backup your personal data, than relock bootloader to run RUU.
CanuckinPA said:
My biggest concern is updating the firmware. From my bootloader info, I'm assuming that I'm way behind on the latest firmware, but after reading so many threads about updating, my head is swimming.
Click to expand...
Click to collapse
Yes, based on your hboot number, your firmware is about as old as it gets (Android 4.4.2).
You can RUU to 4.4.4 firmware without s-off; and Lollipop Skydragon GPE should work fine with 4.4.4 firmware.
You can of course still s-off and update to Lollipop firmware. But you need to use some other firmware besides AT&T (such as Dev Edition, Euro, etc.), since they haven't released a Lollipop update (and therefore no firmware).
I just rooted my OF1 phone and tried one of the 3 ROMs the guy that made thread suggested but since the ROM is lollipop based Im still having the same problems I ad with the stock one so Im trying to find out if theres a way to install any ROM that isnt lollipop based or if its possible to go back to the stock ROM cause Im even having more problems after installing the ROM I tried
Which ROM did you flash, and what kinds of problems are you having?
I am looking to flash the Deodexed Rooted ROM from here:
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
I am wondering something about it. Obviously I know it comes without all the crap apps on it that just take up space. My question is, if I flash this in my TWRP (currently running Pure N5 Port ROM) can I get official over the air updates from T-Mobile should they have any or will it not work?
Which ROM would I have to flash to get OTA updates from T-Mobile?
Just the basic STOCK ROM?
If I flash the STOCK ROM can I root my phone and get rid of the bloatware and still get the OTA updates from T-Mobile?
If anyone can help me and explain this all to me I would be forever grateful. For as much as I love the Pure N5 Port ROM I am having a few issues with it. One being speaker during a call does not work for more than a few minutes. No matter who I call the other person on the other end after a few minutes has a really hard time understanding me as I sound distorted.
Anyway thanks again to all for reading and thanks to anyone that can help!
You have to be on stock unrooted to be able to install official ota files, but you can always just install the corresponding Odin firmware file when an update comes out if you need to be rooted and/or on a custom ROM
Hello,
I have searched a lot on xda and google and didn't find any answer thus far. Maybe somebody knows this.
I have Griffin model 1650-03 I believe. It was running 7.1 stock RETEU. I have unlocked the bootloader, and proceeded to install the 8.0 a whole ago RETUS (I believe it was the december one). Worked fine, installed magisk and it bootlooped. No problem, I'll just install a custom 8.0 ROM (currently RRO), working fin for months, but now, for reasons and mods, I got to install stock. I usually don't use this device, my main is a Google, so I have read countless posts about how dangerous it is to install stock back, devices bricking left and right. I came across an unbricking solution just in case, but sadly that is for nougat faults, oreo is no-go. And all the guides I've found here and on Google are for 7.1 and I'm on 8.1 with feb security patch. I believe I still have the bootloader from that RETUS update.
TLDR, what is a safe way to return to stock from Custom 8.1 rom?
Thanks
I think since the stock rom is 8.0 it might brick your device... Not sure though.
snsone said:
Hello,
I have searched a lot on xda and google and didn't find any answer thus far. Maybe somebody knows this.
I have Griffin model 1650-03 I believe. It was running 7.1 stock RETEU. I have unlocked the bootloader, and proceeded to install the 8.0 a whole ago RETUS (I believe it was the december one). Worked fine, installed magisk and it bootlooped. No problem, I'll just install a custom 8.0 ROM (currently RRO), working fin for months, but now, for reasons and mods, I got to install stock. I usually don't use this device, my main is a Google, so I have read countless posts about how dangerous it is to install stock back, devices bricking left and right. I came across an unbricking solution just in case, but sadly that is for nougat faults, oreo is no-go. And all the guides I've found here and on Google are for 7.1 and I'm on 8.1 with feb security patch. I believe I still have the bootloader from that RETUS update.
TLDR, what is a safe way to return to stock from Custom 8.1 rom?
Thanks
Click to expand...
Click to collapse
Restore the TWRP backup you did for the stock rom, if you didn't do a TWRP backup you should be fine flashing stock rom the same version you had before installing custom ROMs. Remember if you get a brick it means you are most likely downgrading or upgrading (upgrade should be done with OTA and incrementally to stay safe)
Vcek said:
Restore the TWRP backup you did for the stock rom, if you didn't do a TWRP backup you should be fine flashing stock rom the same version you had before installing custom ROMs. Remember if you get a brick it means you are most likely downgrading or upgrading (upgrade should be done with OTA and incrementally to stay safe)
Click to expand...
Click to collapse
Hello, thank for replying,
So I should be fine if I install via fastboot the same stock RETUS I did before going custom. Should I ota over motorola's software or fastboot? Also, can I be able to OTA RETEU over RETUS?
Thank you
snsone said:
Hello, thank for replying,
So I should be fine if I install via fastboot the same stock RETUS I did before going custom. Should I ota over motorola's software or fastboot? Also, can I be able to OTA RETEU over RETUS?
Thank you
Click to expand...
Click to collapse
I would recommend OTA through the device but it's not reversible (once you flash it you can't downgrade because of bootloader upgrade)
Flashing reteu over retus should be fine as long as you are doing it manually and are aware which partitions you are flashing and which you are omitting. I don't recommend this because sometimes it can break certain things like wifi or data signal (especially if you are on stock rom) and doing OTA later through the device can cause errors
Tldr;
If you want to stay on stock rom, flash back to stock then update everything through rom
If you need root or play around with custom ROMs then don't flash anything just reinstall a stock-like custom ROM
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-install-official-oreo-t3768712 this is the guide i've used to update to oreo (which is RETUS and my device is RETEU), then installed RRO. My guess is I have to install all oreo partitions again (I installed all as stated in that guide) and let it do its OTAs. I had no problems with IMEI and signal on RRO.
Hello Guys, after the years i want to reactivate my XZ1 with Stock Rom, so the nearly question is custom rom yes or no?
I think for my child 9 years is stock rom okay and safe he don´t has a bank or online banking or like that, is there any Opinnion that make a Custom Rom sense on the XZ1 and if that what is the best on versus the old stock rom?
I think he will use the camera most, but in custom roms i have read that there are issueses with the Custom Rom on the camera?
Give it a good Custom rom for this device where all work fine? thanks
Can anyone told me make it sense or not
bluedesire said:
Hello Guys, after the years i want to reactivate my XZ1 with Stock Rom, so the nearly question is custom rom yes or no?
I think for my child 9 years is stock rom okay and safe he don´t has a bank or online banking or like that, is there any Opinnion that make a Custom Rom sense on the XZ1 and if that what is the best on versus the old stock rom?
I think he will use the camera most, but in custom roms i have read that there are issueses with the Custom Rom on the camera?
Give it a good Custom rom for this device where all work fine? thanks
Click to expand...
Click to collapse
Camera is working fine on my XZ1 running on LineageOS 19.1 and 20.0
I would not want my kids foto's all over googles servers. But that's everybody's own free choice ofcourse.
Did Headset work and all is fine?
how can i Upgrade IT can i save the Stock Firmware for worstcase.
bluedesire said:
Did Headset work and all is fine?
how can i Upgrade IT can i save the Stock Firmware for worstcase.
Click to expand...
Click to collapse
Definately download the stock firmware first. I forgot, and I'm having a hard time getting the right version.
I did not check headphones yet, but audio/video is all well. Currently I have another OS (Evolution) installed, I might revert back to LineageOS in a few days. I will check headphones then.
Main issue I'm having now is the mobile service connection. It's very unreliable, and the data is always off. Also on Evolution OS, so it might be the phone's hardware. (Did not check out of the box.)
Edit, okay, back to LineageOS 17.1. Don't know how, but the modem works now.
It was about this file: amss_fsg_poplar_tar.mbm
I think because I installed Lineage 19 without simcard.
I tried to flash stock ROM, but could not get it to work.
A lot of "invalid Zip format" errror messages...
So I tried LOS 17, and it al worked, then dirty installed 18, and then 20. And modem worked, but then failed.
Back to 17.1 again, and up till now no problemos.