tablet: Xperia z1 tablet, sgp311, lollipop 5.0.2
It stopped booting after I had wiped the Dalvik cache, system, data, cache and then TWRP(Custom recovery) asked my if I wanted to install super user and now my tablet wont turn on now, It has a red notification light but thats it. When I hold the power button and the volume up button all that appears is the sony screen then it turns off. If I hold the power button and volume up button for longer it does the three led flashes but then it just shuts down.
I can put my device into fastboot mode and access it using flashtool in fastboot but not flashmode.
Anyone have any suggestion on how to fix this?
you've wiped everything including android (system partiton) hence why its not booting.
to get it into flash mode make sure its turned off, then press and hold the volume down key while inserting the usb cable. is your bootloader unlocked? (guess it must be if youve flashed TWRP)
podycust said:
you've wiped everything including android (system partiton) hence why its not booting.
to get it into flash mode make sure its turned off, then press and hold the volume down key while inserting the usb cable. is your bootloader unlocked? (guess it must be if youve flashed TWRP)
Click to expand...
Click to collapse
Thanks I managed to flash android 5.1.1 onto my device, I downloaded it through flashtool.
Hello, I made some huge mistake, I tried to flash with MiFlash a modded rom with TWRP recovery.
The flashing succeeded but now my Redmi 3 vibrates twice, shows the mi logo and turns off. In some weird way (press power button and volume+ and when the logo shows up immediately press volume-) I can reach the fastboot, but it's the only thing I can reach.
If I try to reach the EDL my phone vibrates twice and turns off
Unfortunately the fastboot is still locked (i made the request on miui, but still no answer).
Even when is turned off my Pc detects the phone as Qualcomm HS-USB QLoader 9008
Is there any way I can trick the lock in the fastboot and flash something which will repair at least the EDL so I can go back to stock firmware without disassembling my phone (I already read the guide, but I'm scared of doing it)?
if i remember well you have to power on while pressing both volume + and - so u'll get to black screen that is download mode. then flash a miui rom with miflash. i bricked mine severals time xD
Check if MiFlash recognizes it in that QLoader mode.
Thank you guys, I figured it out by myself last night, vol+ vol- + power opens the download mode. I flashed a china developer rom waiting for miui to unlock the bootloader.
Thanks anyway
Today i had flashed latest china dev fastboot ROM in Redmi Note 3 SD.
After succesfull flashed i had flashed TWRP 3.0.2-2
Then wiped all & flashed RR N.
Whenever i tap reboot to recovery or reboot to fastboot from power menu, Device starts normally not in recovery or fastboot.
Tried 3-4 times by flashing TWRP via fastboot mode but every time whenever i want to go recovery or fastboot i must have to press vol+ & power or vol- & power simultaniously.
Any Solution...?
Power key + volume up for recovery mode.
Power key + volume down for fastboot mode.
Edit: Sorry, I misread the question. I think it is a ROM problem.
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
My M4 (E2312) have pretty much the same symptoms: can not boot anything and just stuck on SONY logo, Flashtool does not recognize phone in flashmode (Vol -), just fastboot. And using fastboot to flash system, boot, recovery shows finished processes but phone does nothing new. And phone does not response well to USB, only after a reset then it updates the status.
I have Pexo ROM v3, custom TWRP, SkyMelon 9 I think,Rooted SuperSU and Magisk( has conflicts so when I boot some pop up says X app has stopped working. When I install some more apps to use it was ok, then the pop ups show up more and more and then it decides to boot loop to the stage we are now.
I have tried install 0.9.33 and 0.9.23.1( somehow only 0.9.23.1 can install 3 drivers), Xperia Companion, Emma, ggsetup 3.2.0.1, Driver SONY so0104 (so0113 ADB interface- status show it cannot start),
So either it is the drivers on computer, the computer USB ports, the phone's software or hardware defects lead to software that caused it.
bdnlspam said:
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
Click to expand...
Click to collapse
Yes, I also tried installing conceptify but it doesnt work. At this point its better if you stick with the stock rom, remove as much bloatware as possible and consider it a phone because almost none of the ROMs here work stability wise, or they maybe stable but some features like display brightness or speakers dont work. So I recommend you install stock rom via flashtool and then unlock the bootloader via flashtool again and install twrp again. Also if possible try reinstalling the drivers for the phone in flashtool. Hope this works mate.
Not my name said:
Also if possible try reinstalling the drivers for the phone in flashtool.
Click to expand...
Click to collapse
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
bdnlspam said:
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
Click to expand...
Click to collapse
Can you try it on a Linux PC I guess?
I tried to root my phone by magisk.
After flashing a patched boot.img, it's failed to boot into system and I got a message that "the device need factory reset". I clicked yes and everything seems ok,I can boot into system. Then I tried to flash img again. So I boot into bootloader. Unfortunately, this time I got a black screen. The phone doesn't response me anymore.
I tried the software repair in xperia companion but It cannot dected my phone when I hold on volume down and plugged in it. I also tried hold on volume up + power but nothing happened. Hold on power key also no response. The led light always black, only become red when I connect it to my pc.
What should I so now and what's my phone's status? I searched something about 9008 mode and edl but I don't know how to check whether my phone is really turn into that status, my pc cannot dect my phone.
Have the same problem, only with the 5 iii instead. Still looking for a fix.
Try to switch the phone off; then just plug it into your PC without holding the Vol- key. It has happenned a couple of times with me that the phone does not want to boot up, with attempts to get it into FLASH mode by holding the key down throwing more confusion into the mix.
I think there is a low battery protection. Make sure the phone is charged up. Keeps the device from death during a flash.
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Evil_Sephiroth said:
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Click to expand...
Click to collapse
It might require experimenting with service modes and different chargers. I had an early Xperia 1 III that bootlooped while charging after setting up the fingerprint reader. It seems that charging is disabled during booting. It has to finish or enter a service/fault mode.
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
tomatoketchup said:
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
Click to expand...
Click to collapse
I feel sorry for you brother...such a nice device...OK let's talk what happened, the state now your device is in is called hardbrick and it had a corrupted bootloader or no boot loader, but your device is still alive, in your PC in device manager it lists as Qs USB mode with some number after it like qsusb9008...now this device can only be brought to life with the help of a blankflash file which can flash your boot loader in snapdragon service mode...actually no snapdragon can be hardbricked permanently now you need appropriate blankflash file for your device.. Please don't open the device if some repairmen suggests to do JTAG nothing is necessary all you need is blankflash file which is shared to only Sony testers groups.... Who tests ROMs before release and they hardbrick so they share those files to them.... Please don't loose hope....it takes time but certainly it can be bought back to life... And dont try any flashing utility as there is no functional boot loader on it now and nothing will work...Sony won't provide that for sure and they will say then can only solve by mother board replacement ,don't believe therm your device is perfect it only needs blankflash file as it entered into final safe mode... I ain't regular on XDA if you need any info contact me via my mail [email protected] g ma I'll .com
Have any of you tried this - https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
ok in my case it was the charging IC