Related
i bought a usb otg from ebay he work perty fine a periode of two mounthes but now when i plug the usb otg its notifed (usb connector connected ) but there is nothing i pluged usb stick i pluged mousses keyboards nothing and i have tested that on many phones (galaxy s2 and note and s3 ) so i think the problem is in the otg how can i fix that ?
Buy a new one. They're all of five bucks.
MistahBungle said:
Buy a new one. They're all of five bucks.
Click to expand...
Click to collapse
i know that but i live in algeria there is not who i can buy it
Well you said you've tested different USB devices with it, and you've also tested it on 3 different phones. Which obviously means the cable itself is cactus.
Not really anything you can do about it.
A quick Google search for 'repair USB OTG cable" brings up a bunch of results, some of which detail how to repair USB cables (apparently). Looks like you have a lot of research/work to do if you can't buy another one then.
I've got a similar problem with OTG USB driver on SGN.
I bought OTG cable which work fine when I connect pendrive device, but doesn't work when i try to connect usb mouse, keyboard, pad ect.
It worked when I had a stock samsung software 4.0.3, but I changed it because of its battery drain problem. I've installed 4.0.4 Paranoid Android v05 (CM9). I found in Market application USB Host Controler, and itshows "S3C USB Host driver NOT found!".
Is it possible to add this driver to OS ? Or is there any other way to use external hardware device like mouse or keyboard?
Hello there,
unfortunately, I couldn't get USB OTG working, even though it should support it according to various spec pages.
My setup is following: LG G5 <-> USB Type C to Micro USB adapter <-> Micro USB-OTG adapter (2.0) <-> USB 2.0 thumb drive (see attached picture)
The light of the drive is not lighting up. So maybe the G5 isn't powering the device?
I've tried three different USB-OTG adapters without success. All three are working on a G4 as well as on a Nexus 7 (2012) flawlessly.
The USB Type C to Micro USB adapters should work as well. Charging (normal and QuickCharge) is working perfectly fine, even ADB does as it should so the data pins should be connected. However, both adapters lack D+ and D- pins for USB 2.0 on one side. This should not be a problem, though. (see attached picture)
Did somebody succeed in using OTG in a similar setup?
The usb c to micro adapter is your problem
Hey budd
this one works
rarely found :laugh:
http://www.amazon.com/Type-C-MicroU...F8&qid=1465049962&sr=8-11&keywords=otg+c+type
Thank you for your answers
outadaprk said:
The usb c to micro adapter is your problem
Click to expand...
Click to collapse
Is it because the USB controller needs to be configured to be in OTG-mode by using another resistor value?
A_hijazi_ said:
Hey budd
this one works
rarely found :laugh:
http://www.amazon.com/Type-C-MicroU...F8&qid=1465049962&sr=8-11&keywords=otg+c+type
Click to expand...
Click to collapse
Do you know whether they comply with the USB 3.1 specifications?
I have the same issue so i used the usb type c to micro adapter on an usb cable and it connected to my computer just fine and i could transfer data is it still the the adapter?
You do know they have started releasing type c OTG cables and adapters without the need of converting from micro usb to type c, right?
See the pictures below. These are just some of the types you can get, soon enough there will be more types of otg and more adapters for type c usb
If not then see the links provided
According to their titles, it says that they comply with 3.1 specs..
On ebay:
http://www.ebay.com/sch/i.html?_odk...0&_trksid=m570.l1313&_nkw=type+c+otg&_sacat=0
On amazon:
http://www.amazon.com/gp/aw/s/ref=is_s?k=type+c+otg
Hope this help :good: and also, let us know, if you decide to buy it, how it goes. Chances are very high
Thank you for your reply .
I am aware of those adapters, I just hoped I would be able to use my OTG adapters I already had at home. I'll try to buy one later that year and will report back which one's working…
Hello, sorry for my english, i'm from germany! But i have found the problem, why you can't connect to the usb storage! If I disconnect my sd card in the settings and connect my otg device, i can find the usb stick! My lg g5 can only connect one device in time!
Not the adapter ...
I was on lineage OS until end of May and did not get the OTG working with any adapter what so ever.
OTG worked with the Stock Kernel and now I am running Resurrection Remix' version of April 8th 2017. Since Resurrection Remix is based on lineageos - as expected - the OTG got broken in later Resurrection Remix releases.
So something weird happened in the firmware between April 8th and now.
This one works perfectly.
https://www.amazon.co.uk/gp/product/B019XSJGN6
Any news on LG G5 and broken OTG?
i have the same issue, i can connect my G5 with Adapters to my PC... there Data Transfer is working
But no usbstick or usb led or usb mouse is running with choetech or anker usb adapters.
i also tried this one
https://www.amazon.de/Adapter-CHOET...id=1498804949&sr=1-18&keywords=choetech+usb+c
it seems that the usb devices are getting no power from the usb port
Lord Morpheus said:
This one works perfectly.
https://www.amazon.co.uk/gp/product/B019XSJGN6
Click to expand...
Click to collapse
Tried many adapters that claim to be h850-OTG-comaptible (have now 8 of those). It can't just be the adapter, because earlier version of Lineage OS and RR worked and still work.
But I am glad that you have found a solution for yourself
ullsig said:
Tried many adapters that claim to be h850-OTG-comaptible (have now 8 of those). It can't just be the adapter, because earlier version of Lineage OS and RR worked and still work.
But I am glad that you have found a solution for yourself
Click to expand...
Click to collapse
I've already poked our G5 maintainer about it and he'll investigate the issue when he gets back from vacation in a bit over 2 weeks. It has to be something that LOS changed upstream and he'll try to work it out when he gets back
The same issue here. When I first time connected OTG adapter G5 showed notification about charging and when I clicked that it could be changed to multimedia device or something similar. It connected the USB key successfully but disconnected few seconds later. Never ever got this notification again when connected any other USB keys. Nowhere in the settings can be found any USB options.. Any idea how to fix this?
I have the same issue.
I have a number of usb c otg adapters and devices. Like cameras (endoscope). Drone telemetry receiver. Programmable LED spinner that uses an android app.
All of these things worked in the past. Connecting to my LG G5 resulted in a popup where I would choose which app to run.
Now when I plug anything into the usb port using an otg configuration, nothing pops up. Nothing happens.
Phone still charging ok via usb.
Hello all
I finally gave up on OTG, after having bought 8 so-called LG G5 compatible OTG adapters for half a fortune
BUT for everybody who is in the same big despare as I was, I - by chance - finally found a great solution for myself.
"SanDisk Connect Wireless Stick" with integrated WiFi (mine has 32 GB), provides copying, streaming and whatsoever to your phone - simple and simply genius.
see also:
https://www.sandisk.co.uk/home/mobile-device-storage/connect-wireless-stick
https://play.google.com/store/apps/details?id=com.sandisk.connect
Plug it into the PC and use it like a normal USB stick and connect to Phone via WiFi and optionally share with other mobile devices.
For home internet you can even use the stick and WiFi at the same time. Whoever invented this gimmik may have been aware of all our issues.
Just works like a charm. Unbelievable!
Instead of waiting "til kingdom come", stop posting, complaining, waiting - at least I will stop, because obviously nothing's going on in this direction.
A little Addition: when you have IP-config (or similar) installed on your LG G5 and you open IP-config
https://play.google.com/store/apps/details?id=com.paksoftwares.ipconfig&hl=en
then connect the WiFi of the PC to the SanDisk Stick and type the gateway-address shown in IP-config into the URL-line of your browser
You can then transfer data between phone and PC directly via the SanDisk Connect WiFi stick ... how cool is that?
Mine works fine. Had issues with certain kernels though...
Bump
Still same Problem in RR.
The Adapter works in TWRP version 3.1.0.0 but in the newer versions also not.
I don't even get a pupup and devices Art n't powered...
Is the typhon kernel capable oft handling otg?
my experience
I am using the stock Android OS 8 on an LG G5 from Fido in Canada, specifically the “LGE LG-H831” variant according to the Google Play Store. I have a microUSB plug↔full-size USB Type A socket USB OTG adapter from StarTech that works with my Samsung Galaxy Note 3 but I needed a USB Type C plug↔full-size USB Type A socket USB OTG adapter now that I have switched from the Galaxy Note 3 to the LG G5. I bought five of this model of adapter (in red colour) on eBay for only around 5 CAD total including shipping from Asia to Metro Vancouver, Canada, which took between 20 and 30 days but buying this type of product on eBay from Asia cost way less than buying it locally:
https://www.ebay.ca/itm/283235483653
Sorry, I got ahead of myself in writing my story because I am tired and I did this USB OTG stuff at least a week or two ago by now. I have two models of microUSB socket↔USB Type C plug adapters, one black one from StarTech and one white unbranded one that may have been included with the LG G5 but I do not know for certain because my father gave me this LG G5; I am not the original recipient/user of this LG G5. I could not get any of the USB devices I tried working with the LG G5 with these two types of adapters connected together. I tried with a USB SSD, a USB keyboard with a microUSB connector (so actually using only one adapter in this case), a USB keyboard with a normal full-size USB Type A plug, and a USB↔Ethernet adapter. That is why I searched the Internet and found this topic. Then the adapters I linked above arrived. With the adapter I linked above, all of the USB devices that did not work (other than the keyboard with the microUSB connector) now seem to work with the LG G5. I was not able to network the LG G5 via Ethernet in the time I had available to spend on that project but I think this was only a software problem because the hardware seemed to be working. When I say the USB devices did not work with the LG G5 with the old adapters, I mean nothing seemed to happen when I connected the USB devices to the LG G5 using the old adapters. With the new adapter, the USB devices seem to work when connected to the LG G5 without any special action. I upgraded the stock OS on the LG G5 from Android OS 7 to Android OS 8 before I began seriously using the LG G5 because I did not want to lose the time customising the software if the in-place upgrade of the OS failed. Almost all of my experience with the LG G5 is with the stock Android OS 8, not Android OS 7 nor earlier versions. I have not and will not try to replace the stock OS on the LG G5 because I had a bad experience with replacing the OS on the Galaxy Note 3 even after I reverted to the stock OS. My LG G5 seems to still be unrooted, which seems to not matter in practice for my use case so far.
I purchased a USB 3.1 docking station model T3527-VIII+ from ineo on Amazon. USB 3 to type C adapter comes with it. I use the adapter with my LG G5 RS988 without a problem. Devices are: regular USB drives, USB keyboards and USB mice.
https://smile.amazon.com/gp/product/B073W4YDFQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hallo every one
I was at the market want to have cable to connect my z2 to my TV with HMDI
So there was to way to do this
1 from HMDI to micro USB
2 frome HMDI to normal USB and then cable to micro USB
And I like the choice nbr 2 because I can connect my laptop too
But Iam not sure if my phone will work
Did any one know about this before I buy it because it's costs 40€ and I must be sure.
many thanks.
Xperia Z2 has MHL so if you buy micro USB > HDMI it will work. (I don't know if it works on custom roms but on stock it should work properly).
USB in laptops/PCs cannot sync video due that video output is from graphics card and USB has nothing to do with graphics card.
Something else is if you have USB type C and if manufacturer guarantee that it can sync video.
Next case, that is price. 40€ for that? You will overpay! You can buy that for about 3€ on Aliexpress
Ah, but his Z2 is HMDI so it will never work
rubiicon59 said:
Ah, but his Z2 is HMDI so it will never work
Click to expand...
Click to collapse
Haha xD
Bumping: When buying an MHL adapter, make sure it's not made specifically for samsung devices, because there's no cross-compatibility. Talk about "standards".
PD: I tried buying one from gearbest. The package never arrived. Such is life in Bolivia.
Bumping again: someone knows how to connect MHL and OTG simultaneously on Z2?
Thanks in advance
No. It's not possible. At least not with the Z2.
The USB port, and the chipset only supports either USB mode, or MHL (hdmi) mode. Not both at the same time.
It can however charge the device while in MHL mode.
Even though there are multi port adapters out, the same thing goes. Either or. Not both.
Some other manufacturers devices DO support both modes simultaneously, but only through the special port and a special adapter for that particular device. I.e. Samsung 11 pin port for some galaxy variants.
If you're interested in keyboard and mice, there are Bluetooth capable keyboards and mice out there. That'll work.
For storage I'd suggest using a larger SD card in the SD card slot.
I have used a USB stick with many different Samsung phones, and when the USB stick is inserted, a window pops up on the phone, and you can transfer files back and forth.
My friend's V10 works this way.
But on my V20, and now V30, there is no response at all to inserting a USB stick. If I connect The V20 or V30 to a PC with a USB cable, files can be transferred as expected. But inserting a USB stick doesn't work.
I've tried various settings on the phone (multi-media host, etc) and nothing changes it.
Has anyone else tried this? Can you read a USB stick?
Could you try going to Settings>Storage and see if you can see the USB stick there?
Sent from my sailfish using XDA-Developers Legacy app
Thanks for your suggestion. The storage screen shows internal memory and an SD card, but not the USB stick. I posted this same question a year ago about the V20, and didn't get much feedback then, either. Maybe it's not common for people to use a USB stick with their phone.
Maybe try one of the usb otg reader apps on the play store
snwbrd said:
Maybe try one of the usb otg reader apps on the play store
Click to expand...
Click to collapse
I remember when I got a pixel several years ago, and I had to use this.
.
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
.
to see the stick...
.
( hope this helps )
Thanks for the app suggestions. I tried a couple OTG readers with no success. Stickmount sounds promising, but it requires root, so I can't try it just yet.
Could you please try with an external harddisk and let us know if that works?
Sent from my Pixel 2 XL using XDA-Developers Legacy app
Mine works. When I put drive in, it asked how I wanted to recognize the usb device (Charge, power supply, media, photos, etc). I kept it on power supply and my drive is mounted and available.
There might be a couple things to look at...
1. Is your dongle/cable data capable? WIth USB C, there are some differences with USB 2/3 and only charge capable.
2, Have you tried messing with the developer settings for USB? You can try to force it to data instead of charge.
What file system is the USB flash memory formatted for?
Bootup said:
Mine works. When I put drive in, it asked how I wanted to recognize the usb device (Charge, power supply, media, photos, etc). I kept it on power supply and my drive is mounted and available.
Click to expand...
Click to collapse
Thank you.
I use one of these:
https://www.amazon.com/gp/product/B01AUKU1OO/
and my phone recognizes USB flash drives with no issue.
i have a note 5 and V20 and now the V30 (well i just got rid of the note 5 and v20 but had did testing on both ports previously).
i have a usb to otg cable. i also have a RTL-SDR device. from the play store i downloaded the rtl-sdr driver and sdrtouch app (did this to all my phones).
the rtl-sdr dongle was not recognized on the V30 and i would really love to know how to fix this.
the v20 and note 5 and currently my note 3 all worked with no problem.
i wonder since i now have to use my lg g5 type-c to female micro-usb adapter that it makes it not work correctly?
maybe we need a usb 2 otg cable that has usb type-c on the end?
otg or host mode not working 100%
Hi,
just got my V30 plus H930DS (nice shiny blue actually ) and plugged in a couple of usb flash drives and a multi adapter card reader and nothing.
But... just picked a AUKEY USB 3 to USB-A adapter cable and instantly recognised a 4gb flash drive.
Tried another 16GB flash drive but got a message about needing to fix it. As there was not much on there I said yes, warning that everything will be deleted, then 2 seconds later, message says its ok and now working fine for copy copy/paste.
The flash drive was formatted by the phone to FAT32 (it was ntfs before)
I also tried exFAT formatted from windows and that worked so that would help with >4GB files.
The bottom line is that you need a good make cable which is specifically for USB-3 and either FAT 32 or exFAT. Best bet is to plug in the flash drive and if the phone wants to format it then do it that way.
Just a heads up, i know both the samsung OTG adapter and the pixel 2 OTG adapter work with the v30. I use them myself.
Link420able said:
Just a heads up, i know both the samsung OTG adapter and the pixel 2 OTG adapter work with the v30. I use them myself.
Click to expand...
Click to collapse
Hi,
ah, that was my next question
I also have a cheap adapter that doesn't work.
Will get one of those above also.
Do lg not have any branded goodies?
gazzacbr said:
Hi,
ah, that was my next question
I also have a cheap adapter that doesn't work.
Will get one of those above also.
Do lg not have any branded goodies?
Click to expand...
Click to collapse
Only the V30+ comes with some goodies, which is the B&O play headphones. I get to unbox all the new phones as part of my job and I end up with adapters from all sorts of devices.
I prefer the Pixel OTG as it works with a case on and seems very durable.
All of my OTG drives, which I used on my HTC M8, work on the V30 also. If it doesn't tell you it's working, go to settings and mount it.
Wotta said:
All of my OTG drives, which I used on my HTC M8, work on the V30 also. If it doesn't tell you it's working, go to settings and mount it.
Click to expand...
Click to collapse
Hi, I have double ended Sandisk flash disks which only work with the AUKEY adapter cable usb a, not with a usb c adapter.
I don't see any where in settings to mount it
Very fussy is this LG
EDIT: have bought some small UGREEN adapters and everything works as expected now.
Does the Mi Pad 4 support OTG+Charging at the same time? So if hook up a Y USB Type-C cable, connect power, connect a usb storage stick and plug it in the tablet. Are you able to charge and use the usb stick simultaneously?
Because I am looking to replace my Nexus 7 (2013) for my in-dash car install with the Mi Pad 4 (dimensions are almost identical) this would be a nice feature
Regards,
Frank
did you find a replacement?
FrankZZ said:
Does the Mi Pad 4 support OTG+Charging at the same time? So if hook up a Y USB Type-C cable, connect power, connect a usb storage stick and plug it in the tablet. Are you able to charge and use the usb stick simultaneously?
Because I am looking to replace my Nexus 7 (2013) for my in-dash car install with the Mi Pad 4 (dimensions are almost identical) this would be a nice feature
Regards,
Frank
Click to expand...
Click to collapse
I'm in the process of doing something similar with the Mi Pad 4. Waiting for one USB OTG hub which supposedly supports charging and data at the same time. will update when it comes and I test it.
User848 said:
did you find a replacement?
Click to expand...
Click to collapse
I have not found a replacement yet. I'm hoping OrionBG can give us some good news
OrionBG said:
I'm in the process of doing something similar with the Mi Pad 4. Waiting for one USB OTG hub which supposedly supports charging and data at the same time. will update when it comes and I test it.
Click to expand...
Click to collapse
Glad to hear! I'm waiting to buy it. Probably will as soon as you say it works, though. Thanks for sharing, in advance!
Still waiting for mine. I hope that it will be soon but we are still talking about "China Air Mail" so...
Update: I got my HUB and unfortunately it does not charge the tablet. Only usb ports are working. The more interesting part is that on my phone (Huawei Mate 20 X) it is the complete opposite... It charges the phone but the usb devices are not detected...
I'm beginning to think they should remove the "U" from USB when it is about Type-C ...
I also am thinking that the tablet does not support the USB PD protocol and there might not be any hub that will do charge and data on it.
Hey guys,
Success!! .... or at least 99% of one...
Some weeks ago when I tested the first hub I purchased (the one that worked as a hub but not charging) I contacted the seller and the replied to me that they have most probably sent me the wrong model and will send a new one. Today I got that replacement and upon opening the package I was quite skeptical to find the same (at least visually) hub. Anyway I tested it and oh miracle! It is charging the tablet and at the same time it works as a USB OTG HUB!! The only caveat is that it is charging slowly (about 200mA to 500mA) but at least it is working.
This is the one: LINK
anyupdates? thinking of getting of these to replace my n7
OrionBG said:
It is charging the tablet and at the same time it works as a USB OTG HUB!! The only caveat is that it is charging slowly (about 200mA to 500mA) but at least it is working.
Click to expand...
Click to collapse
This is great.
1. Can you confirm which ROM and kernel you were using when the OTG+Charging was working?
2. Where you able to test a USB DAC as an OTG device simultaneously when charging?
3. Any specific order in which the peripherals, tablet and charging cable have to be connected, in order for OTG+Charging to work?
sara.ramli said:
This is great.
1. Can you confirm which ROM and kernel you were using when the OTG+Charging was working?
2. Where you able to test a USB DAC as an OTG device simultaneously when charging?
3. Any specific order in which the peripherals, tablet and charging cable have to be connected, in order for OTG+Charging to work?
Click to expand...
Click to collapse
1. Unfortunately I don't have the tablet anymore as my project didn't happen but I'm almost sure that it was either the Xiaomi dev ROM or the Xiaomi.EU rom. (it was a MIUI ROM and I have not tested any other MIUI ROMs than those two) Regarding the kernel, it was which ever Kernel was in the ROMs.
2. DAC I did not test. Only USB Flash drive.
3. Order I tried first connecting everything to the hub and then the hub to the tablet, and also connecting and disconnecting USB Flash drives while everything is connected.
OrionBG said:
1. Unfortunately I don't have the tablet anymore as my project didn't happen but I'm almost sure that it was either the Xiaomi dev ROM or the Xiaomi.EU rom. (it was a MIUI ROM and I have not tested any other MIUI ROMs than those two) Regarding the kernel, it was which ever Kernel was in the ROMs.
2. DAC I did not test. Only USB Flash drive.
3. Order I tried first connecting everything to the hub and then the hub to the tablet, and also connecting and disconnecting USB Flash drives while everything is connected.
Click to expand...
Click to collapse
Thank you. It did not work with MIUI or XIAOMI.EU ROM for me, but it does with the Havoc ROM. USB DAC + Flash Drive were both working plus the Pad was charging as well (upto 750mA)
https://forum.xda-developers.com/showpost.php?p=80816741&postcount=1354