Use ROM with different kernel - OnePlus X Q&A, Help & Troubleshooting

Because of a different mainboard wich is installed in my Oneplus X I need special ROMs, as mentioned in this thread -> https://forum.xda-developers.com/oneplus-x/help/twrp-doenst-replaced-mainboard-t3609581
The adapted TWRP version works fine, but unfortunately the suggested ROMs from CheckYourScreen have some issues. For a few days now the mobile data connection doesn't work, wich is a huge problem. So I want to switch to another ROM but how do I know wich ROM is compatible with the arsenic kernel?
This kernel gets used by the Validus ROM from this thread -> https://forum.xda-developers.com/gr.../roms-ground-zero-roms-validus-tesla-t3546588 wich I am using right now.
So my question is how do I know wheter a new ROM is compatible with the arsenic kernel and fits all requirements? If it happens that you know another ROM that probably is compatible I wouly also be happy to try your suggestions.

Related

[Q] Does a rom always icludes a specific kernel?

Hi all,
I want to know if a rom always contains a new kernel and can you change the kernel without changing to another costum rom?
I'm sure most ROMs come with a kernel that is tweaked, at least a little. That doesn't necessarily mean it will support oc/uc. and yes you can flash a kernel, if compatible with you ROM, at your leisure.
there is no spoon.....
Almost all roms come with a kernel of some type, but I feel like I remember seeing a rom a few months ago that didn't come with any kernel, so you had to flash one right after you flashed the rom before booting up (that's what the dev said if I'm remembering right, I didn't flash the rom).
And yes, you can flash any kernel at any time as long as it is compatible with your device/rom.
Well... if the ROM doesn't contain a kernel (that's kind of common) your previous kernel is retained.
This applies specifically to stock-based ROMs

which ROM should I use?

Hi all,
I'm currently using the stock firmware 4.2.2 and I don't have any problem yet, it seems fast and everything but I heard custom rom are usually faster.
I have checked a few roms and I'd like to try them but what I usually see when trying to decide what rom to install is that features that are improved are usually listed but there's not a list of things that don't work or don't work as good we in the stock firmware.
For example, it seems like some rom have problems with gps, other with audio, some with wireless.
There are two roms I would like to choose from
-HTC OneX+ INTER CM10.2 (4.3) Nightlies & M1
and
-CarbonRom UNOFFICIAL JB 4.3.1 - 2013_11_11
which one would you advise? and what problems do they have?
is it there something else that you would advise me to install instead?
Thank you
What ROM to use is very subjective and really varies user by user. The best way to get information is to start reading the ROM threads and then when you have enough information flash it and see if it works for you.

[Q] Cant connect to Wifi after flashing certain ROM

hello guys, here i have some problem to connect with wifi after flashing a certain new ROM
when i try to connect, it always said, Obtaining IP adress.....authentication.....
this is happen to
- NeatRom (AOSP)
- Slimkat
- (long time ago with Supernexus)
well i dont have a problem connecting to Wifi with
- stock Rom
- temasek
- Archidroid
i have go through all the search topics, flashing WIFI-II9300 fix... do the terminal thing...set wifi region (Singapore, Europe, United Sate), flash boefella kernel.... still cant connect...
i hope all the master developer here can help me, and let me use the above ROM that i want to try....
normeck said:
hello guys, here i have some problem to connect with wifi after flashing a certain new ROM
when i try to connect, it always said, Obtaining IP adress.....authentication.....
this is happen to
- NeatRom (AOSP)
- Slimkat
- (long time ago with Supernexus)
well i dont have a problem connecting to Wifi with
- stock Rom
- temasek
- Archidroid
i have go through all the search topics, flashing WIFI-II9300 fix... do the terminal thing...set wifi region (Singapore, Europe, United Sate), flash boefella kernel.... still cant connect...
i hope all the master developer here can help me, and let me use the above ROM that i want to try....
Click to expand...
Click to collapse
i just want to try that ROM .. are you already reflashing it?
tr4falgar said:
i just want to try that ROM .. are you already reflashing it?
Click to expand...
Click to collapse
yep...now im back to temasek...
normeck said:
yep...now im back to temasek...
Click to expand...
Click to collapse
I had the exact same experience with my wife's phone that I bought of ebay. I even flashed a variety of RIL's (radio interface layers) and different modems. I'd never had the problem with my SGS3 before, and have hundred of different roms on it.
Anyway it seemed to be a kernel issue and after trying ever combination possible I found that wifi would always work perfectly on any stock based rom or any CM based rom (assuming that hey used the CM kernel). It wouldn't even work on a CM rom if I flashed a different kernel such as Yank's, Boeffla or Googy.
Also at the time I trawled the net looking for answers and found one or two others that had the same issue, but could still use stock Sammy or CM. Strange... almost felt like it was an odd batch.
pjcarrmole said:
I had the exact same experience with my wife's phone that I bought of ebay. I even flashed a variety of RIL's (radio interface layers) and different modems. I'd never had the problem with my SGS3 before, and have hundred of different roms on it.
Anyway it seemed to be a kernel issue and after trying ever combination possible I found that wifi would always work perfectly on any stock based rom or any CM based rom (assuming that hey used the CM kernel). It wouldn't even work on a CM rom if I flashed a different kernel such as Yank's, Boeffla or Googy.
Also at the time I trawled the net looking for answers and found one or two others that had the same issue, but could still use stock Sammy or CM. Strange... almost felt like it was an odd batch.
Click to expand...
Click to collapse
ahh... thankz for your feedback... really disappointed when you only can use only certain custom rom.... hope developers can look into this problem....

Sugest I9300 stable rom for daily use as of 2016.

Hello. I know that this question is asked a million times, but answers to them are already obsolete. Currently am looking ( I am sure I am not the only one) for headache-free, stable and fast ROM as my daily driver. I just want to install a ROM, tweak it a little if I have to and be sure it will work me for another year or so (I am to tired to flash 3rd ROM in a row to see it have major problem).
So if someone would post a brief information about ROM you are using, any custom modification, setting tweaking, flashed custom kernel and potential tradeoffs You The Real MVP.
My experencie with Rom's so far:
Archidroid v3.0.2 (kitkat)
Previously I used as a daily driver which really worked nice for me, until I got infamous "google services stopped worked" which I fixed only by turning google location service (making some cool aps unusable) . Shame, it is the best ROM I tried. The only problem I had was for camera sometimes freezing in black screen, but it happened very rarely.
There was suggestion to re-flash this ROM with flashing never GAPS from OpenGAPS project. Tried, but again got "google services stopped worked". I saw some other workarounds I could try, but I want to be sure there isn't anything better before I try it.
Archidroid v3.1.5 (Lolipop)
Based on lollipop, everything works reliably, BUT much slower then on Kitkat version. Though strangely, decreasing dpi to 240 improved performance dramatically. Many users agree that 3.0.2 is still the better one.
Cyanogenmod-13 (Marshmallow)
Looks promising, fast out of the box with some interesting features. However still buggy (torch not working on lock screen, chrome/ radio crashes phone and so on).
So far as I understand best ROM's are based on Kitkat - Lollipop and Marshmallow needs more ram to run effectively then s3 has. So even some developers suggest sticking to older Android versions. I also heard Boeffla kernel is the best one though I didn't try it personally. What makes it so special ?
Try Liquid Smooth KK rom with boeffla kernel
CyanogenMod 11
Hello,
if you want a stable and battery save ROM, I would prefer CyanogenMod 11 Nightly!
Download:
cm-11-20151213-NIGHTLY-i9300.zip
boeffla-kernel-2.13-CM11.0-i9300.recovery.zip
2.2.19-boeffla-config-v2.apk
Any suggestions for Touchwiz ROMs?
best rom i9300
[ROM][31.12.15][4.4.4][STOCK][STABLE][TW][AROMA] Blekota Note 4 Lite v5.2.1 Final
http://forum.xda-developers.com/galaxy-s3/development/rom-blekota-note-4-lite-v1-t2949680
the best and stable rom with very good camera
msat59 said:
Any suggestions for Touchwiz ROMs?
Click to expand...
Click to collapse
Heh, thanks. I actually flashed cyanogenmod 11 stable and indeed,its stable as it should. Was some problems flashing OpenGAPS but managed to fix flashing version without Aroma installer.
Could anyone tell more about boeffla kernel? What is so special about it ? I know that I can tweek some settings, but I am not going to trade stability for +100 benchmark points.
Zyrus123 said:
Heh, thanks. I actually flashed cyanogenmod 11 stable and indeed,its stable as it should. Was some problems flashing OpenGAPS but managed to fix flashing version without Aroma installer.
Could anyone tell more about boeffla kernel? What is so special about it ? I know that I can tweek some settings, but I am not going to trade stability for +100 benchmark points.
Click to expand...
Click to collapse
I use boeffla on all roms because of boeffla sound tweaks and easy zram setup.
Best rom is pacman kk rom, all features in one, bugless...
If u need i will send u gapps that i used before on that rom and worked great.
Only thing it doesnt work, like on all kk, lp and probably mm is noise supression for viber/whatsapp calls. I tried all kk, most lp roms, tried everything to enable ns for voip but it could not be enabled.
Touch wiz rom i recommend is ncsrom, most lightweight rom, fast and stable, made with boeffla kernel...
vuckovic_stefan said:
Best rom is pacman kk rom, all features in one, bugless...
If u need i will send u gapps that i used before on that rom and worked great.
Only thing it doesnt work, like on all kk, lp and probably mm is noise supression for viber/whatsapp calls. I tried all kk, most lp roms, tried everything to enable ns for voip but it could not be enabled.
Touch wiz rom i recommend is ncsrom, most lightweight rom, fast and stable, made with boeffla kernel...
Click to expand...
Click to collapse
please give me a link to the last release of pacman rom kk
Here ya go, latest Pac-Rom KK build:
https://basketbuild.com/devs/pacman/i9300/KK/RC-3
which ROM for best battery life and best standby time?
Trafalgar Square said:
Hello,
if you want a stable and battery save ROM, I would prefer CyanogenMod 11 Nightly!
Download:
cm-11-20151213-NIGHTLY-i9300.zip
boeffla-kernel-2.13-CM11.0-i9300.recovery.zip
2.2.19-boeffla-config-v2.apk
Click to expand...
Click to collapse
-Hey Please if you downloaded this cm11 nightly build before can you upload it to me because cyanogen is down right now and I've searched ALOT for cyanogen roms for my I9300 and I found some but not that stable for my device I've switched about 3 times now for deffirent roms PLEASE IF YOU HAVE THIS NIGHTLY BUILD UPLOAD IT FOR ME
Currently I am on Hyper v10 NougatUX 4.4.4 its a great Rom with many features .
You have also Atila Rom v7 it is very lite T.W 4.4.4

latest and smooth roms?

hello, i ve been looking for a good rom for this device, but it seems that is not that much supported by rom. I saw Pacman rom but the thread was closed which means not supported anymore. so do you recommend any rom ? because my htc one max became laggy and such or do you suggest any mods to the current stock rom? or any ported rom ?
Thanks
I didn't try every possibility but... I found that the sense 7 5.0.2 rom by yankee worked the best on my Sprint onemax.
I couldn't get most others to work well... Usually data did not work. CM12 or CM13 didn't work for me...
This one:
http://forum.xda-developers.com/htc-one-max/development/rom-yankees-y25-0-2-sense7-sprint-t3258792
Shady282 said:
hello, i ve been looking for a good rom for this device, but it seems that is not that much supported by rom. I saw Pacman rom but the thread was closed which means not supported anymore. so do you recommend any rom ? because my htc one max became laggy and such or do you suggest any mods to the current stock rom? or any ported rom ?
Thanks
Click to expand...
Click to collapse
I'm running CM13 (cf. https://wiki.cyanogenmod.org/w/Build_for_t6vzw) or, if you don't wish to build it yourself, you can download Flyhalf's excellent ROM here:
http://forum.xda-developers.com/htc-one-max/orig-development/rom-cyanogenmod-13-0-t3260857
Both run just fine on my OneMax.
HTHAL
There doesnt seem to be much support for this device anymore. Ive been following Fly's CM13 build. its really awesome and really stable. Ive tried the Nusense 6 and it was a great rom but i liked the CM 13 better and thats currently my daily driver.
Have a look here.
https://theunlockr.com/roms/android-roms/htc-roms/htc-one-max-roms/
Thinking of getting a Max.
Probably will just doing a bit of research first.
I guess it missed the Marshmallow update?

Categories

Resources