Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
SubwayChamp said:
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
Click to expand...
Click to collapse
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Jackevolution said:
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Click to expand...
Click to collapse
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Jackevolution said:
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
Click to expand...
Click to collapse
SubwayChamp said:
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Click to expand...
Click to collapse
Already done, now semms to be stuck on the same loading screen, baibe he installing apps? It taking sooo long...
i think this isn't working. It's just 20 minute that phone is stuck on "Mi" screen...
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Jackevolution said:
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Click to expand...
Click to collapse
Yes, you can reflash again the rom, put the rom zip in your adb folder and short the name as you can, and flash it using adb sideload, to do this tap on "advanced option" and then "adb sideload" in recovery menu and in adb terminal in your pc type adb sideload nameofrom.zip where nameofrom is te name of the rom, don´t forget the extension .zip as I wrote. TWRP will load the zip and flash it again and then you can flash Magisk to root device.
If you can´t see storage of device in your pc is cause it´s encrypted but you can perform adb sideload anyway
Jackevolution said:
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
Click to expand...
Click to collapse
Look at the error you got every time "Can not find flash_all.bat" its mean that you are selecting invalid path, okay so here is correct method to flash via fast-boot method:
Download the latest fast boot rom zip one option is http://bigota.d.miui.com/V9.5.12.0....FA_20180525.0000.00_7.1_global_343bc5aaef.tgz
Unzip .tgz using winrar and the zip will be extracted in folder named as vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 inside this folder there will be another folder named same.
Open Mi Flash tool and click to select direct to folder vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 open the folder and then open the other folder click Ok (don't open the the images folder)
Connect your redmi 5 plus in fast boot mode and click refresh, then choose clean all and click Flash
Related
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
IMPORTANT: It appearance that Huawei is no longer going to provide bootloader unlocking services for their devices. Because of this, this guide is of no use unless you can find a way to get a code or you just held onto the code.
Hello, this is a guide for unlocking the bootloader and rooting the Huawei Ascend XT. I am writing this because the current guide is not very well written and does not contain bootloader unlock instructions. This will be split into two parts: Part 1, unlocking the bootloader, and Part 2, rooting the phone.
PLEASE NOTE THAT FOLLOWING THESE INSTRUCTIONS WILL WIPE YOUR DEVICE. I AM NOT RESPONSIBLE FOR AND DAMAGE DONE TO YOUR PHONE!
THINGS YOU WILL NEED:
1. A Huawei Ascend XT with at least 60% of battery left
2. A computer with adb drivers, fastboot drivers, and the Huawei USB drivers
3. A Micro-SD card for your backups (THIS IS VERY IMPORTANT! PLEASE MAKE BACKUPS!)
4. TWRP for this phone. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933 (credits to enigma2446)
5. The ZIP containing SuperSU. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933
6. The SDK Platform Tools. These can be found on the android studio website.
PART 1: UNLOCKING THE BOOTLOADER1. Geting the Bootloader Unlock Code: You need to get your bootloader unlock code. You can get this by going to https://emui.huawei.com/en/plugin.php?id=unlock
(EDIT: It appears that this website is down. I have read that if you PM Huawei on Twitter or call them and provide all the details of your phone, they will give you a code. I have not tested this method, bit people have said it worked with the mate 10.) and signing into your Huawei ID. If you dont have one, create one. Then, follow the instructions given to you by Huawei to get the code.
2. Enabling the Enable OEM Unlock Option: To enable this option, you must enable developer options. To do this, go to Settings>About Phone and tap the Build number until it says "You are now a Developer". back out of About Phone, and go to Developer options. turn on "Enable OEM unlock" and press Enable.
3. Enable USB Debugging: While you are still in Developer options, enable the option 'USB debugging" and press OK.
4. Booting Into the Bootloader: once you have completed the first three steps, you can now boot into the bootloader. Connect your phone to your computer, and open the Platform Tools folder you should have downloaded and extracted. Shift-Right click, and press "Open Command Window Here" or "Open Powershell Window Here", depending on your version of windows. Once it is open, make sure your device is detected by typing "adb devices". If it displays your device, you are good to continue. If not, something is not set up right on your computer or phone. Once you verified that your phone is detected, type "adb reboot bootloader".
5. Unlocking the Bootloader: Once your phone has booted into the bootloader, you can now unlock the bootloader. YOUR PHONE WILL BE WIPED ONCE YOU TYPED THIS COMMAND. You can unlock it by typing "fastboot oem unlock <your bootloader unlock code>". Once it has finished, you can reboot your phone, and just run through the setup fast, because you will still have to wipe it again.
PART 2: ROOTING YOUR PHONE1. Move the TWRP image you downloaded (called
Xtrecovery) to your Platform Tools folder and rename it to "TWRP.img"
2. Insert Your Micro-SD Card
3. Move the SuperSU Zip you downloaded to the SD card
4. Re-Enable USB Debugging: Enable Developer options by going to Settings>About Phone and taping the Build number until it says "You are now a Developer". Back out of About Phone, and go to Developer options, and enable USB debugging, and press OK.
5. Boot Into the Bootloader: Type "adb reboot bootloader" into your open CMD window or Powershell window.
6. Verify That your Phone says that the Bootloader is unlocked
7. Type "fastboot boot TWRP.img"
8. TWRP should boot. Tap "Keep Read Only"
9. You should now be in TWRP. Go to Backup>Select Storage and choose your Micro-SD card and tap OK. Uncheck everything and check "Recovery". Then, Swipe the slider to back up your stock recovery partition.
10. Once it has finished backing up, reboot your phone to the bootloader.
11. Once it is in the bootloader, type "fastboot flash recovery TWRP.img" to flash TWRP as your recovery. (I believe this is the point where your warrenty will be invalidated by Huawei, so be careful.)
12. When it finishes flashing TWRP, reboot your phone to TWRP by holding down the power button and volume up
13. It should boot to TWRP. Tap "Keep Read Only", then go to (YOU ARE ABOUT TO WIPE IT AGAIN)Wipe>Format Data and type yes, and hit the enter button.
14. Once it finishes, go to Backup>Select Storage, select your SD card and hit OK, then check every box to backup all six partitions, and swipe to back them up. (At the end, it may seem to get stuck at 98-99%, DO NOT STOP IT! It is generating an MD5 checksum)
15. When it finishes backing everything up, go back to the home screen of TWRP, then go to Install, navigate to where you stored the SuperSU ZIP, select it, then swipe to flash it.
16. When it finishes flashing the SuperSU ZIP, tap "Clear Cache/Dalvik" and swipe to clear them.
17. Reboot your phone. IT WILL REBOOT MULTIBLE TIMES AND APPEAR TO BE STUCK SOMETIMES, BUT DONT TOUCH IT! This is normal and it will eventually boot like normal.
That's it!
Your phone should now be rooted and have SuperSU installed. Please note that this is a Systemless root, and will be removed if you factory reset your phone.Thanks to divineBliss for creating the original instructions.
What do we do after we get root to install custom ROMS? please advise
nedfred0 said:
What do we do after we get root to install custom ROMS? please advise
Click to expand...
Click to collapse
To install a custom ROM, you need the ROM you want to install, gapps depending on the ROM, and the proper firmware. The firmware you are on can be found under about phone and is the last 4 digets of the build number (in the format of B1xx). Once you are on the proper firmware, have your ROM and other things it may require, (every ROM is different), and a backup (just in case), you can flash the ROM from TWRP. Follow the instructions provided by the creator of the ROM to properly flash it.
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
BTJustice said:
Where do you get the USB driver at because I am not seeing it at
Click to expand...
Click to collapse
The drivers come with HiSuite. Download it and you should be good to go.
randomness725 said:
The drivers come with HiSuite. Download it and you should be good to go.
Click to expand...
Click to collapse
Thanks. I tried that but couldn't get it to go so I downloaded these instead which did the job:
https://www.androidfilehost.com/?fid=817550096634745788
does this work on the new h1711 huawei assend xt2
xaneth201 said:
does this work on the new h1711 huawei assend xt2
Click to expand...
Click to collapse
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
bricked 1711
randomness725 said:
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
Click to expand...
Click to collapse
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
You need a copy of the stock H1711 recovery image to use
"fastboot flash recovery H1711-stock-recovery.img" to restore the stock recovery. Until someone creates a working H1711 TWRP, I don't know where you'll find a stock H1711 recovery image file.
scrungydoolittle said:
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
Click to expand...
Click to collapse
download hisuite, enable oem unlocking and usb debbuginig, you gotta also get tha password or the unlocking, denn u run cmd and type:
adb devices
i hope i helped
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
BTJustice said:
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
Click to expand...
Click to collapse
Here is the site for USB drivers for all Huawei models:
http://huaweiadvices.com/download-huawei-usb-drivers/
Good luck....
Does the phone even have a fastboot mode?
RomLord14495 said:
Does the phone even have a fastboot mode?
Click to expand...
Click to collapse
Sure it does
Notes on booting up the phone (from power off)
Bootloader (fastboot) = power + volume down + USB hooked to pc
eRecovery = power + volume up + USB hooked to PC
TWRP = power + volume up
Click to expand...
Click to collapse
Optionally you put phone into bootloader/fastboot or recovery modes by typing from an adb prompt "reboot bootloader" or "reboot recovery"
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
dominoes20 said:
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
Click to expand...
Click to collapse
You'll have to use DC Unlocker and pay to unlock until the page returns
Since unlocking the bootloader is no longer supported, I have a suggestion but am afraid to try myself.
So, download stock version of rom (aka fastboot rom). Extract, replace recovery.img with twrp (renamed to recovery.img). Restart phone in EDL mode, flash. In theory, edl is working fastboot mode so it shouldn't matter if bootloader is unlocked, correct?
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Imma try this out, I’m stuck in a weird situation where my sd card slot broke. When I sent it in for service, they said it was rooted and refused to fix it. I specifically did not root it so that I could send it in for warranty service. So it’s mission to try and root, unlock boot loader etc so that I can have more storage space
---------- Post added at 11:50 AM ---------- Previous post was at 11:36 AM ----------
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Can you be a little more specific? I didn’t get that info on google
Hey there,
i was wondering if anyone got an idea how to get root access / TWRP working on a Doogee T6 Pro ?
I don't really find anything online that seems to be working and of course most one-click root tools dont work for China phones.
Anyone got any idea ? The official forums look empty as well.
It looks good
Applesoap said:
Hey there,
i was wondering if anyone got an idea how to get root access / TWRP working on a Doogee T6 Pro ?
I don't really find anything online that seems to be working and of course most one-click root tools dont work for China phones.
Anyone got any idea ? The official forums look empty as well.
Click to expand...
Click to collapse
Some useful tips for rooting MAZE Alpha, perhaps will help you : MAZE Alpha root
Use the method I to patch your boot.img with Magisk-v14 and flash the result image, it must works
Here is the HowTo, have done it 3 times yet:
First, get the correct TWRP Version for Doogee T6Pro ( i dont remember where i got it, i can upload it somewhere if someone have a good location) and the SuperSu Zip.
Then, activate the Developer Options in the Device Settings and Activate the OEM Unlock and USB Debugging in there.
The next Step is to Boot the Device in Fastboot mode. you can either do it by USB with the Terminal Command: "adb reboot bootloader" or you can turn the device of and then reboot it by pressing the Volume Up Button and the Power Button simultanously (quite difficult, didnt Work every Time). You will get to a menue with 3 options: Boot to Recovery, Fastboot and Normal. Switch through these Options with the Volume Up Button and Select it with the Volume Down. Go To the Fastboot Option and Select it.
In Fastboot Mode, plug in the device to an computer and type the terminal command "fastboot oem unlock" (in windows, you have to install the fastboot tools. i dont remember that i had to install them in ubuntu... im not sure). this will wipe the whole data of the device. its important to reboot the device afterwards normaly. otherwise it could happen that you get stuck in an bootloop later ( happend twice to me ) this normal system boot will last much longer then normal, so get a coffee or tea
the next step is do get to fastboot mode again and then send from your computer the command: "fastboot flash recovery twrp-recovery-filename.img". this will flash the recovery.img on the recovery partition.
than go to the bootloadermenue and this time you dont choose fastboot but the recovery option. this will start TWRP
while TWRP is running, you can copy the SuperSU zip to the device with Nautilus or in windows systems with windows explorer. then select "Install" in TWRP and select the SuperSU.zip.
After the installation, reboot to normal system and you are ready with rooting!
if something goes wrong, it can happen that booting to normal system will get you stuck in an bootloop. the last time i could repair the system by booting into recovery (TWRP) and select the Wipe menue and there the Format option. the other time i downloaded the original system from Doogee and flashed all partitions. im not sure if that was necessary.... but who knows :fingers-crossed:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
Hi,
my Note 5 (which is standard with latest software updates) hangs on the Mi screen when starts up. I can get it into FASTBOOT mode.
And when I connect to PC/Windows 10 and go through adb and enter this:
fastboot devices
gives this result:
fcef713c0904
But I'm not sure what to do now? I guess I need to flash some sort of recovery but not being super tech savvy I'm a bit nervous.
thanks Phillip
@phil170258
Edit: fastboot is recognicing your device, as far I understood what you mean you tried to unroot it and gave you bootloop, flash the boot image that you are using lastly through fastboot and see what happens
SubwayChamp said:
@phil170258
Edit: fastboot is recognicing your device, as far I understood what you mean you tried to unroot it and gave you bootloop, flash the boot image that you are using lastly through fastboot and see what happens
Click to expand...
Click to collapse
Hi,
thanks for your reply.
I wasn't trying to do anything with my phone (root or unroot) when it started this behaviour so I don't have a boot image to flash? And my phone doesn't have 'usb debugging enabled' but because it won't turn on I can't enable it.
So i need to do 'fastboot flash recovery twrp.img' but when I do this it says cannot load twrp.img no such file or directory.
Aaaaaah!
thanks, Phil
phil170258 said:
Hi,
thanks for your reply.
I wasn't trying to do anything with my phone (root or unroot) when it started this behaviour so I don't have a boot image to flash? And my phone doesn't have 'usb debugging enabled' but because it won't turn on I can't enable it.
So i need to do 'fastboot flash recovery twrp.img' but when I do this it says cannot load twrp.img no such file or directory.
Aaaaaah!
thanks, Phil
Click to expand...
Click to collapse
Then try first going to recovery stock manually and wipe data and try to boot.
There are many users reporting this kind of issues along the time (updating firmware, charging all the night, etc) so the best is enabling USB debugging if something goes wrong you´ll have more options to save your device.
I guess you have your bootloader locked and also for this reason you can no longer use fastboot mode to flash some file.
If the first doesn´t result then your last resource would be to flash a rom through test point method (if you have Redmi 5 Plus-Vince)
SubwayChamp said:
Then try first going to recovery stock manually and wipe data and try to boot.
There are many users reporting this kind of issues along the time (updating firmware, charging all the night, etc) so the best is enabling USB debugging if something goes wrong you´ll have more options to save your device.
I guess you have your bootloader locked and also for this reason you can no longer use fastboot mode to flash some file.
If the first doesn´t result then your last resource would be to flash a rom through test point method (if you have Redmi 5 Plus-Vince)
Click to expand...
Click to collapse
Wipe data worked!
Thanks, and yes, i will enable USB debugging
thanks, Phil