MORFUZ KERNEL FOR P10 LITE OREO
:good: Hi guys, this kernel perfectly works also on our device. Works at HONOR 7X
https://forum.xda-developers.com/p10-lite/development/kernel-p10-lite-catuva21-t3798915
Feodorus 4PDA said:
MORFUZ KERNEL FOR P10 LITE OREO
:good: Hi guys, this kernel perfectly works also on our device. Works at HONOR 7X
https://forum.xda-developers.com/p10-lite/development/kernel-p10-lite-catuva21-t3798915
Click to expand...
Click to collapse
can you overclock?
zooyork8998 said:
can you overclock?
Click to expand...
Click to collapse
I can't tell I didn't try
Trying to figure out best settings, I agree kernel works great.
in the OP says he has Selinux permissive, then it is possible that viperaudioFX work?
rafi1123 said:
in the OP says he has Selinux permissive, then it is possible that viperaudioFX work?
Click to expand...
Click to collapse
Isn't that line edited , to say "missing"
Because permissive it not working
Will this work on treble GSI?
works for me on Stock Emui 8
Work on my custom ROM !
But there are problems with deepsleep with some governor
Can someone send me the stock kernel of bnd l21 ?
Well Ok it works, but how to get back to stock kernel.
lalitkhokhar said:
Well Ok it works, but how to get back to stock kernel.
Click to expand...
Click to collapse
Supposed to have made backup of kernel before flashing. Did you do?, Then just restore that backup.
I just tried flashing this with magisk and it said it installed, but is there an easy way to actually tell if it worked? I'm just trying to get viper4android to work to hopefully get around the dreadfully quiet headphone volume.
TiklMiPickles said:
I just tried flashing this with magisk and it said it installed, but is there an easy way to actually tell if it worked? I'm just trying to get viper4android to work to hopefully get around the dreadfully quiet headphone volume.
Click to expand...
Click to collapse
Go to settings, about phone - half way down it has kernal info
There's been some concerns on viper4 on customs roms causing bootloops -
Theres a dolby and a sony audio improvement zip to flash as well - i don't have links but try the telegram groups
nickzeptepi said:
Go to settings, about phone - half way down it has kernal info
There's been some concerns on viper4 on customs roms causing bootloops -
Theres a dolby and a sony audio improvement zip to flash as well - i don't have links but try the telegram groups
Click to expand...
Click to collapse
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
TiklMiPickles said:
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
Click to expand...
Click to collapse
they might not have similar problems cos they are not installing it.
Try find the dolby and sony sound things. - look also on mate 10 forums as its the same hardware
nickzeptepi said:
they might not have similar problems cos they are not installing it.
Try find the dolby and sony sound things. - look also on mate 10 forums as its the same hardware
Click to expand...
Click to collapse
It looks like the mate 10 is having the same issues, but after trying my headphones with the new kernel, it looks like the gain isn't limited to a super low volume like it was before! I'm not sure if this is just a placebo effect or if it actually solved the headphone volume issue, but I am hoping that was the fix I needed.
Has anyone tried this on Mate SE?
---------- Post added at 01:04 PM ---------- Previous post was at 12:47 PM ----------
TiklMiPickles said:
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
Click to expand...
Click to collapse
Did you ever get V4A to work? Did you go into settings in the app and in Developer Mode select the Disable SELinux mode?
MikeyLee said:
Has anyone tried this on Mate SE?
---------- Post added at 01:04 PM ---------- Previous post was at 12:47 PM ----------
Did you ever get V4A to work? Did you go into settings in the app and in Developer Mode select the Disable SELinux mode?
Click to expand...
Click to collapse
Tried that, but it didn't work. I tell it to turn off Selinux, let it install the driver, then reboot the phone, and as soon as I reboot it and open the app again, it says the driver isn't installed
TiklMiPickles said:
Tried that, but it didn't work. I tell it to turn off Selinux, let it install the driver, then reboot the phone, and as soon as I reboot it and open the app again, it says the driver isn't installed
Click to expand...
Click to collapse
Have you tried any of the suggestions on the v4a xda thread. Like removing the stock audio overlay (xml) file first.
I keep seeing people say it will not work because selinux, or because of 64 bit drivers, then you go look at the xda thread, and see many (some) people saying it works for them.
If you are having the permissive setting working correct, then tell me if the guide on this link is working?
https://www.the***********.com/install-viper4android-on-android-oreo/
Related
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
First of all i've searched everywhere in the last 2 days but found nothing, i have a Xiaomi Redmi Note 3 Pro and i've installed the cm-13.0-20161117-NIGHTLY-kenzo(latest) everything is working fine, flashed the Xposed framework and installed the apk and again everything is fine but when i decide to install any module no and i reboot to activate it i just get stuck at the Android robot face animation.. can i get somehelp somewhere?
What robot face??...do you mean the boot logo..or the something else?
hitesh1792 said:
What robot face??...do you mean the boot logo..or the something else?
Click to expand...
Click to collapse
Yep i mean the bootlogo animation
Paura7 said:
Yep i mean the bootlogo animation
Click to expand...
Click to collapse
Go to twrp recovery and clean install the ROM
---------- Post added at 08:18 PM ---------- Previous post was at 08:16 PM ----------
You might have installeded an xposed module which is either not compatible with your device or the os version hence you are experiencing bootloop...
hitesh1792 said:
Go to twrp recovery and clean install the ROM
Click to expand...
Click to collapse
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Paura7 said:
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Click to expand...
Click to collapse
which xposed framework are u flashing?
hitesh1792 said:
which closed framework are u flashing?
Click to expand...
Click to collapse
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Paura7 said:
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Click to expand...
Click to collapse
Try may b a diff rom...like RR..
hitesh1792 said:
Try may b a diff rom...like RR..
Click to expand...
Click to collapse
I'm not interested so much in changing room because i've always been a fan of CM..
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Paura7 said:
I'm not interested so much in changing room because i've always been a fan of CM..
Click to expand...
Click to collapse
Try using some earlier nightly..
balazs312 said:
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Click to expand...
Click to collapse
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Paura7 said:
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Click to expand...
Click to collapse
Yes, it is being fixed atm, we also found a temporary solution http://forum.xda-developers.com/redmi-note-3/how-to/fix-fix-bootloop-issues-xposed-roms-t3503184
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Sadly doesn't work on PNW as of now.
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Please raise any issues in the thread linked in the OP, not here. Thanks.
LenAsh said:
Please raise any issues in the thread linked in the OP, not here. Thanks.
Click to expand...
Click to collapse
Sorry! It was already an issue I brought up with that port in that thread, I was just letting everyone know the experience from it and that it doesn't work for our phones yet.
Original thread states SDK 26 (Oreo) as a requirement.
The magisk Dolby axon 7 module is working fine on nougat
---------- Post added at 10:54 ---------- Previous post was at 10:27 ----------
Teet1 said:
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Click to expand...
Click to collapse
Can you test this for Oreo, I can't do because my wife's axon 7 needs to run stable on Los 14
https://forum.xda-developers.com/showpost.php?p=74943166&postcount=31837
Works on my mi a1 with Oreo.
You don't have to download to PC first, just mount system before flashing with twrp.
Thanks, I get work it with last version of PNW and Hellsgate kernel, making a clean install and installing supersu before, with magisk don't work for me.
May you have to use selinux permissive module for magisk.
Dear OnePlus Lovers,
did anyone of you get the Viper4Android FX Tool to work.
I tried nearly all possible way to set SELinux in permissive mode but nothing works.. it says everytime i have to install the driver but the magisk module is already installed..
Maybe any suggestions?
How did you root?
I did what everyone is telling. I just searched in the GSI Thread.
But only for you.
Post in thread 'GSIs status + boot dump' https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/post-85472945
drumntetri5 said:
I did what everyone is telling. I just searched in the GSI Thread.
But only for you.
Post in thread 'GSIs status + boot dump' https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/post-85472945
Click to expand...
Click to collapse
im curious if your in-display FingerPrint scanner works and also Auto brightness ? Currently used GT Neo with Corvus GSI
Fingerprintsensor is working very fine.
On my Xiaomi Mi9T Pro after flashing magisk it was not useable.
For the automatic lightsensor I can't say anything because I'm not using it.. but after I activated right now it's dimming the light down..
Hi, did you make it work?
drumntetri5 said:
Dear OnePlus Lovers,
did anyone of you get the Viper4Android FX Tool to work.
I tried nearly all possible way to set SELinux in permissive mode but nothing works.. it says everytime i have to install the driver but the magisk module is already installed..
Maybe any suggestions
Click to expand...
Click to collapse
sakarya1980 said:
Hi, did you make it work?
Click to expand...
Click to collapse
Sadly, no.. and at the moment I'm afraid to dig deeper into this because we don't have TWRP...
Hello,
After not touching any root related stuff in the last 2 years, I decided to root my new oneplus nord 2. It is running android 11.
I have magisk manager and I wanted to install an audio mod on it. First I tried Viper4Android, which didn't work in any way I tried, and cannot change SELinux to permissive sadly. V4A keeps prompting me to install the drivers even tho they are visible in Magisk.
After that I went to JamesDSP and tried installing that too. Tried both flashing it with Magisk, as well as installing the apk. In both cases as soon as I open the JamesDSP app, it opens up for half a second than closes again.
I've noriced the audio mod apps are kind of finicky. Was hoping some of you guys might be able to suggest some things I can try that I am unaware of. Or maybe an audio mod alternative that I haven't heard about?
NimeniAltu666 said:
Hello,
After not touching any root related stuff in the last 2 years, I decided to root my new oneplus nord 2. It is running android 11.
I have magisk manager and I wanted to install an audio mod on it. First I tried Viper4Android, which didn't work in any way I tried, and cannot change SELinux to permissive sadly. V4A keeps prompting me to install the drivers even tho they are visible in Magisk.
After that I went to JamesDSP and tried installing that too. Tried both flashing it with Magisk, as well as installing the apk. In both cases as soon as I open the JamesDSP app, it opens up for half a second than closes again.
I've noriced the audio mod apps are kind of finicky. Was hoping some of you guys might be able to suggest some things I can try that I am unaware of. Or maybe an audio mod alternative that I haven't heard about?
Click to expand...
Click to collapse
Ok I will taste some audio mods and let you know which is working for nord2
You're the real MVP. There's a chance I did something wrong or some detail I've missed along the way as quite some things have changed since I was into rooting and all these stuff.
NimeniAltu666 said:
You're the real MVP. There's a chance I did something wrong or some detail I've missed along the way as quite some things have changed since I was into rooting and all these stuff.
Click to expand...
Click to collapse
Sorry for I was using GSI today I will revert to OOS and then flash flash the audio mm OD and report back here
Hello, have you managed to get anything to work for an audio mod?
NimeniAltu666 said:
Hello, have you managed to get anything to work for an audio mod?
Click to expand...
Click to collapse
No tried each and every mod not working
Similar problem.. and the problem is ONLY switch seLinux - permessive/ ... How to be, I don't know
DeMiane said:
Similar problem.. and the problem is ONLY switch seLinux - permessive/ ... How to be, I don't know
Click to expand...
Click to collapse
We are releasing custom rom with Dolby Atmos working sooom
pankspoo said:
We are releasing custom rom with Dolby Atmos working sooom
Click to expand...
Click to collapse
link please
DeMiane said:
link please
Click to expand...
Click to collapse
Not released till now
pankspoo said:
Not released till now
Click to expand...
Click to collapse
)) Then why answer ...