guys i think i got a real problem here.
First of all i apologize for my english and thank you in advance
i was trying to flash magisk on my with twrp rooted device (samsung galaxy neo, G903F) and since i had some problems i thought i could try it on a fresh system again.
so i just wanted to flash a stock image from updato (i am kinda sure it is the right version).suddenly odin says the progress failed and after a few minutes waiting i disconnected and took out the battery.
when i wanted to start it, i got "error occurred while updating software. use emergency recovery function in smart smitch PC software"
after watching a short video i tried this smartswitch-thing, but its just telling me my device isnt supportet.
the problem is that my phone was rooted while i tried to flash the stock image right? so smartswitch wont work for me? what do you advice? only thing i can do is download modus.
help pleease
Bombadadil said:
guys i think i got a real problem here.
First of all i apologize for my english and thank you in advance
i was trying to flash magisk on my with twrp rooted device (samsung galaxy neo, G903F) and since i had some problems i thought i could try it on a fresh system again.
so i just wanted to flash a stock image from updato (i am kinda sure it is the right version).suddenly odin says the progress failed and after a few minutes waiting i disconnected and took out the battery.
when i wanted to start it, i got "error occurred while updating software. use emergency recovery function in smart smitch PC software"
after watching a short video i tried this smartswitch-thing, but its just telling me my device isnt supportet.
the problem is that my phone was rooted while i tried to flash the stock image right? so smartswitch wont work for me? what do you advice? only thing i can do is download modus.
help pleease
Click to expand...
Click to collapse
You should never remove the battery of your phone when an update failed , you just corrupted your system.
What you have to do now is enter in bootloader mode , plug you phone to your PC , and flash the stock system.img and boot.img.
Search how to do that on your device , watch videos and guide on XDA , then do this.
Remember to always make a backup of your system before doing that.
TY for the fast answer!
do you mean the recovery mode(home + power + vol.up)? i cant enter anything except of the downloadmode (home+power+vol.down). I extracted the boot.img and system.img from the tar.md5 file with 7zip and coverted it to .tar, can i flash that per Odin the same way i tried to flash the whole firmware? and if yes, in which order should i do it or sould i convert boot.img and system.img to one single .tar file? sry i googled more than an hour but didnt find instructions to do this. just the extracting and converting part and thousands of how to flash whole firmwares or fixes via smartswitch-.-
Bombadadil said:
TY for the fast answer!
do you mean the recovery mode(home + power + vol.up)? i cant enter anything except of the downloadmode (home+power+vol.down). I extracted the boot.img and system.img from the tar.md5 file with 7zip and coverted it to .tar, can i flash that per Odin the same way i tried to flash the whole firmware? and if yes, in which order should i do it or sould i convert boot.img and system.img to one single .tar file? sry i googled more than an hour but didnt find instructions to do this. just the extracting and converting part and thousands of how to flash whole firmwares or fixes via smartswitch-.-
Click to expand...
Click to collapse
I'm not an Odin expert at all , but I think you should use the .IMG file , starting with the system.img , and after the boot.img
But I'm not sure at all , take another hour to make searches.
Related
I've downloaded the stock ROM from the acer site, put it on my SD card and went into recovery to apply the update from the sdcard. When trying to update I got the following error:
e: footer is wrong
e: signature verification failed
Installation aborted.
Now, I've searched everywhere and tried at least 20 different things without anything working. I've unlocked the bootloader and flashed the boot.img which was inside the update file I downloaded from the acer site, I've tried flashing certain files seperatly etc. Another problem is, there is no system.img or recovery.img or any other img file in the stock rom from acer which doesn't allow me to flash it via the fastboot. So either I need to find those img files, or I need a fix for the error above.
Any suggestions?
(One more thing, I really can't try using a custom recovery to disable signature verification because the Liquid Z330 is such an unsupported phone, there is no cwm or twrp recovery for it. I also don't wanna risk trying another phone's cwm or twrp on the Z330 because I don't have the stock recovery.img file in case it doesn't work.)
UPDATE: I found an older version of twrp for the phone and I was able to disable signature verification but when trying to install the zip I get this error log:
Updating partition details...
*in red* E: Unable to mount '/system'
...done
Full SELinux support is present.
MTP Enabled
Installing '/sdcard/update.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Error flashing zip '/sdcard/update.zip'
Any new suggestions as to what might be the problem?
Update2:
So after Ysfzone posted this tutorial:
http://forum.xda-developers.com/general/general/acer-liquid-z330-unbrick-unlock-t3520952
I was able to restore my acer liquid z330.
I did actually run into some trouble with Ysfzone's instructions, and found a way around it, it should be the second comment on the post.
My only problem now is that the system is restored it's booting into demo mode. When I try to update it downloads the update and reboots into TWRP and when I then reboot to the system it says that the install failed. I think it would automatically install the update with the stock recovery but because I have TWRP installed I have to find the downloaded update file and install it manually.
So I have two options:
Either someone tells me where the update download folder is, or someone provides me with the stock recovery.
Any help?
Exactly same issues
Hey there!
I have the exact same issues. I have been trying to unbrick my phone, but nothing has actually worked. My phone is still stuck on the white screen with the acer logo.
Did you make any progress?
Were you able to find out anything that works??
Any help will be appreciated.
Thanks
MK
markendeyk said:
Hey there!
I have the exact same issues. I have been trying to unbrick my phone, but nothing has actually worked. My phone is still stuck on the white screen with the acer logo.
Did you make any progress?
Were you able to find out anything that works??
Any help will be appreciated.
Thanks
MK
Click to expand...
Click to collapse
(If you don't want to read the story, read the last sentence.)
I actually was able to get rid of the MD5 check error by creating a MD5 file myself. You basically have to download an application that gets you the MD5 sum. I used this: http://www.fast-files.com/getfile.aspx?file=127067 (just reuploaded it because I forgot where I got it from). Using the exe file in there I generated the MD5 file in this format: d2a862b7c1a8f66b6d1be32f400dc73e *update.zip. After that I tried installing the zip again, this time I got the same error except with the MD5 error missing. After contacting Acer support, I was basically told that I needed to send my info back so I could get contacted for a repair. But since I flashed the recovery it probably wouldn't fall under warranty.
So basically try emailing Acer support and try and get them to repair it. I havent found a way to fix it myself.
One more thing. It wasn't my phone to begin with, I just tried to fix it for someone. That person already has a new phone and I won't be trying anything anymore to fix the phone since I don't have it anymore.
Hello everyone,
I've been in the same situation as you until few hours.
I've also tried a lot of things which doesn't work at all ( like extracting system.img from the Acer update.zip ).
I've seen that every time I tried to install an update.zip package I get the same error:
E: footer is wrong.
E: signature verification failed
And I solved it by unzipping and zipping it again.
Then when I was able to flash it and get my phone back.
if it still doesn't work with the stock recovery, you may try with a custom recovery ( like twrp, you can easily find it on google )
If you have any questions about it, I can try to answer them.
Hope it'll help !
pxie said:
Hello everyone,
I've been in the same situation as you until few hours.
I've also tried a lot of things which doesn't work at all ( like extracting system.img from the Acer update.zip ).
I've seen that every time I tried to install an update.zip package I get the same error:
E: footer is wrong.
E: signature verification failed
And I solved it by unzipping and zipping it again.
Then when I was able to flash it and get my phone back.
if it still doesn't work with the stock recovery, you may try with a custom recovery ( like twrp, you can easily find it on google )
If you have any questions about it, I can try to answer them.
Hope it'll help !
Click to expand...
Click to collapse
Thanks for the suggestion. Just out of curiousity I guess I'll ask the phone back and try it.
I've tried it again, but the problem isn't because the signature verification fails, its something else. Idk what.
Hello Mounir9912,
Have you try to re-download the file from acer website, or/and to check the zip file with winzip or winrar ?
I've read that you created a md5 file, for my part I just disable md5 verification from TWRP.
It seems like you've got a system mount error, do you still get it if you wipe all partition on your phone (system, cache, data, dalvik cache) ?
Finally, I don't know if it can be useful, but I have a TWRP backup of my z330
I'll stay available if you still have trouble.
pxie said:
Hello Mounir9912,
Have you try to re-download the file from acer website, or/and to check the zip file with winzip or winrar ?
I've read that you created a md5 file, for my part I just disable md5 verification from TWRP.
It seems like you've got a system mount error, do you still get it if you wipe all partition on your phone (system, cache, data, dalvik cache) ?
Finally, I don't know if it can be useful, but I have a TWRP backup of my z330
I'll stay available if you still have trouble.
Click to expand...
Click to collapse
You might just be the godsend I needed. I've already tried everything you said including wiping and disabling the verification. Could you upload the twrp backup somewhere? It might be the only thing that can save this phone aside from paying way too much money to acer because of a voided warrantee.
Hello Mounir9912,
Here the link to download the twrp backup of my z330:
mega.nz/#!idICgLAZ!uJo_EvbMHAyVju9qo_uWY7d7aVLkpqxmZAWSd8jtmkk
Hope it'll help.
I'll stay available if you still need help.
pxie said:
Hello Mounir9912,
Here the link to download the twrp backup of my z330:
mega.nz/#!idICgLAZ!uJo_EvbMHAyVju9qo_uWY7d7aVLkpqxmZAWSd8jtmkk
Hope it'll help.
I'll stay available if you still need help.
Click to expand...
Click to collapse
Thanks, I'll try it when I get home (in a few hours)
damn, mega is being an asshole. I downloaded it but while downloading I accidentally unplugged the power cable from my laptop and it shut down so I had to redownload. When I downloaded again it cut me off at like 90% because of exceeding the bandwidth quota of 5GB. Now I have to either pay a monthly fee or wait 5 hours...
Hey pixie,
I've actually restored it via twrp, but it still isn't booting past the logo. Could you maybe make a backup of all the partitions except the boot, system and data partitions? The problem is probably in one of those partitions since restoring the boot or system didn't fix it.
more specifically, the ones I could backup are:
Modem, Aboot, pad, modemst1, modemst2, misc, splash, fsg, persist, cache, devinfo, oem
Hi, i'm in the same problem can you give me the link of official rom ? Plz
Ysfzone said:
Hi, i'm in the same problem can you give me the link of official rom ? Plz
Click to expand...
Click to collapse
https://www.acer.com/ac/en/GB/content/support-product/6358?b=1
Its under "OS"
Or direct download link:
http://global-download.acer.com/GDF...30&Step3=Z330&OS=ALL&LC=en&BC=ACER&SC=EMEA_27
Done Done Done !!!!!!
i fixed this problem wooow !!!!!!
This is how to unbrick Acer Liquid Z330
1- Download Official Rom from here : https://www.acer.com/ac/en/GB/content/support-product/6358?b=1
2- Download this tool from : http://www.stupdroid.com/2016/10/tool-systemnewdat-into-flashable-img.html
3- Download python (required for tool in step 2) : https://www.python.org/downloads/
4- Download Drivers the link on step 1
5- Download and install Fastboot (Search for it)
6- Create new Folder and put into all files on tool (step2) and file_contexts + system.new.dat + system.patch.dat + system.transfer.list from the Official rom
7- now launch "system.new.dat 2 flashable img converter" and tap any key and wait... after you got 2 files.. you need just the file called system.new.img
8- move system.new.img to fastboot/adb folder and rename it to system.img
9- enter phone to fastboot mode and type this command :
fastboot -w
fastboot flash system system.img
10- now just wait and don't worry about messages from fastboot...
11- after you finishing type: fastboot reboot
and wait between 5/10 mins for phone booting..
and DONE !!
Sorry for my bad english
Now my phone stuck on demo mode.. i want the stock recovery.img
hello,
first sorry for the delay.
As far as i remember, I've checked all when I backup the phone. But all that things you list are not unknown, I've seen them when the phone was still bricked. By the way, I even made a backup at this moment, so if you think that it can be useful..
Ysfzone, have you try to use qfil to get you're stock recovery ?
Hello XDA!
I am writing this thread to ask for help rooting my Samsung Galaxy J2 Pro.
I attempted to use apps such as: Framaroot, Kingroot, etc.. but so far none of them have worked and I have not been able to find a working guide on the internet of how to root my phone.
I also tried installing an unofficial version of TWRP for my phone but everytime I tried to boot into the recovery it would say "No Command" and then boot into the original recovery.
Is anyone able to help me root my phone? Can it even be done?
Any help is sincerely appreciated. Thanks!
Phone Specifications:
Samsung Galaxy J2 Pro.
SM-J250G
Android Version: 7.1.1
Bumpity Bump
Try this at your own risk
Make a backup before trying
I got root access with this method
Download stock Rom from sammobile extract and there should be 5 MD5 files extract the AP file with 7z and copied boot.img on to sdcard
Installed MagicalMmanager-7 used it to patch the boot.img to a tar file
Copied the boot image to my pc desktop then flashed the boot with odin
When I booted it back up magisk manager kept crashing so I uninstalled it and installed magiskmanager-5.23 rebooted it opened magisk and followed the prompts to update it
:good:
putzwon said:
Try this at your own risk
Make a backup before trying
I got root access with this method
Download stock Rom from sammobile extract and there should be 5 MD5 files extract the AP file with 7z and copied boot.img on to sdcard
Installed MagicalMmanager-7 used it to patch the boot.img to a tar file
Copied the boot image to my pc desktop then flashed the boot with odin
When I booted it back up magisk manager kept crashing so I uninstalled it and installed magiskmanager-5.23 rebooted it opened magisk and followed the prompts to update it
Click to expand...
Click to collapse
Hello there.
I have tried to patch my boot.img but when I put into a .tar and flash it, it doesn't flash, it's just stuck on file analysis despite being able to flash other files. Would you be able to send me a copy of your boot.img, thanks.
Kindest Regards
-Jayden
JaydenATC said:
Hello XDA!
I am writing this thread to ask for help rooting my Samsung Galaxy J2 Pro.
I attempted to use apps such as: Framaroot, Kingroot, etc.. but so far none of them have worked and I have not been able to find a working guide on the internet of how to root my phone.
I also tried installing an unofficial version of TWRP for my phone but everytime I tried to boot into the recovery it would say "No Command" and then boot into the original recovery.
Is anyone able to help me root my phone? Can it even be done?
Any help is sincerely appreciated. Thanks!
Phone Specifications:
Samsung Galaxy J2 Pro.
SM-J250G
Android Version: 7.1.1
Click to expand...
Click to collapse
Hi Jayden
I've got exactly the same problem. Have you worked this out eventually? Please help!
MC
qichen said:
Hi Jayden
I've got exactly the same problem. Have you worked this out eventually? Please help!
MC
Click to expand...
Click to collapse
Unfortunately I have not found a solution. Please notify me if you find one.
here is a copy of my boot.img after flashing this you will get a verification problem and you will have to reset your phone if it bootloops into recovery or starts to update and says no command take battery out put it back in and boot it again or boot in to odin mode and push down and boot it eventually it will boot in to recovery then factory reset it. first boot may take 5-10 minutes
my software version is J250GDXU2ARD3_J250GXSA2ARD3_XSA
putzwon said:
here is a copy of my boot.img after flashing this you will get a verification problem and you will have to reset your phone if it bootloops into recovery or starts to update and says no command take battery out put it back in and boot it again or boot in to odin mode and push down and boot it eventually it will boot in to recovery then factory reset it. first boot may take 5-10 minutes
my software version is J250GDXU2ARD3_J250GXSA2ARD3_XSA
Click to expand...
Click to collapse
Hello and thanks a lot! I flashed my boot image and now when it boots it says "Set Warranty Bit : Kernel" and an infinite booting screen.
What do I do from here? or do I need to flash the original rom?
don't worry about "Set Warranty Bit : Kernel" mine does it too here is another boot.img after i flashed this i got verification failed so i used 7z to tar userdata.img.ext4 i extracted from the AP image i got the boot.img from.
i put boot in BL and userdata in AP and flashed it. it fired up as normal and then i installed magisk apk
JaydenATC said:
Hello and thanks a lot! I flashed my boot image and now when it boots it says "Set Warranty Bit : Kernel" and an infinite booting screen.
What do I do from here? or do I need to flash the original rom?
Click to expand...
Click to collapse
Flash the original rom then flash boot and userdata as i explain in next post
Hey, sorry for the late response. Everything is working fine! I now have superuser abilities but everytime I try to flash my recovery with TWRP it just loads the stock recovery. I even tried removing certain files from the root folder to avoid the stock recovery being flashed but it hasn't worked.
Any idea? Ps. You are a life saver my man.
JaydenATC said:
Hey, sorry for the late response. Everything is working fine! I now have superuser abilities but everytime I try to flash my recovery with TWRP it just loads the stock recovery. I even tried removing certain files from the root folder to avoid the stock recovery being flashed but it hasn't worked.
Any idea? Ps. You are a life saver my man.
Click to expand...
Click to collapse
glad i could help and i don't think there is an official twrp for this device here is one i ported a couple things still don't work mtp and sideload but it's not really usable until someone ports a rom due to the data encryption which you have to format to be able to flash anything
putzwon said:
glad i could help and i don't think there is an official twrp for this device here is one i ported a couple things still don't work mtp and sideload but it's not really usable until someone ports a rom due to the data encryption which you have to format to be able to flash anything
Click to expand...
Click to collapse
Hello,
Sorry, I don't have the J250G anymore as I traded it for a J5.
Kindest Regards
Jayden
My internal storage showed I only have 8gb instead of 16gb. Is there a fix for this?
P.S. Wiping data fixes it
ok
You can extract it from the AP file from stock firmware using 7z
hey
hey everyone im just wondering but is there a kernel for this device yet or any rom ("J250G")
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
Hi am sick right now caused i messed up i trying to google frp my sm-a315g/dsl device and it kept freezing so i decided to try flashing individual files (yeah I should get some good licks for that ) so i started with the bootloader file it was successful but now the phone won't turn on at all not even charging. I tried brom tp but i don't have the right scatter files. Can anyone help me SOLVE my problem that I caused.
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Teddy Lo said:
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Click to expand...
Click to collapse
The phone not reading to work with Odin thats why am trying via Brom TP unless there is another way to get it show on Odin, cause the phone is not powering on to enter download mode.
Check SP Flash Tool with MTK drivers for MediaTek Helio P65 (MT6768).
Factory images fastboot stock firmware to be downloaded (not odin)
I accidentally used SP Flash Tool "Format All" option when trying to flash a firmware.
After that, I was able to boot the phone but got stuck at the android logo with the error 0x99256658.
According to this thread https://forum.xda-developers.com/t/crash-phone-realme-8-need-image-oppo_custom.4402181/ ,
I know that the problem is caused by missing oppo_custom file.
I then used mtkclient to flash multiple different oppo_custom files on the internet (around 15 files).
Some of them boot the phone to the welcome screen but the phone touch does not work (even in recovery mode).
Does anyone have a dump of this oppo_custom file for this phone or even better, a full dump of this phone? I need the file to restore the phone touch
Thanks in advance.
tienlk19 said:
I accidentally used SP Flash Tool "Format All" option when trying to flash a firmware.
After that, I was able to boot the phone but got stuck at the android logo with the error 0x99256658.
According to this thread https://forum.xda-developers.com/t/crash-phone-realme-8-need-image-oppo_custom.4402181/ ,
I know that the problem is caused by missing oppo_custom file.
I then used mtkclient to flash multiple different oppo_custom files on the internet (around 15 files).
Some of them boot the phone to the welcome screen but the phone touch does not work (even in recovery mode).
Does anyone have a dump of this oppo_custom file for this phone or even better, a full dump of this phone? I need the file to restore the phone touch
Thanks in advance.
Click to expand...
Click to collapse
Read the last post. I think you have no luckhttps://www.hovatek.com/forum/thread-41931-page-5.html
joke19 said:
Read the last post. I think you have no luckhttps://www.hovatek.com/forum/thread-41931-page-5.html
Click to expand...
Click to collapse
I did read that post. However, there is another post on the exact phone model and the same problem as mine on that same forum https://www.hovatek.com/forum/thread-42497.html. The guy got the phone to work. I contacted him but no responses.
I tried 3 different oppo_custom from realme6 and 6i. Got the phone to boot but the touch does not work.
There is also a commercial tool (Unlock Tool) to solve this problem.
So my last hope without the tool is to try a dump from a same device.
I took a full EMMC dump of Oppo F15 phone (similar in specs to A91), extracted the oppo_custom file and flashed it back to the A91 and it works. The content of the extracted oppo_custom file is different from previous files that I used, it has more content instead of zeros block. Below is the file for anyone that faces the same trouble as mine.
hey bro can u pls give me the full backup of your emmc pls