Sorry my english is not good ;/
Sooo...
Yesterday i tried upgrade my lg v10 h901 android 5.1.1
I used the file H90120e_00_0316 and uploaded by LGUP. The program load file in 100% but they stopped on ===rebooting 150sec===
when the instalation was complete telefon not rebooting ;/
USB port detected it as Qualcomm hs-usb 9008
I tried this method
https://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359-------------> but i used kingston microSD card..... it's a mistake?
I will be very grateful for help
Related
Hello , i instal the wrong bootstack in my lg g3 , then he goes dead :crying:
so i geuss i have to hard unbrick
my probleme is that after i instal the qualcomm driver , it show me in Ports(COM Ltp )_Qualcom Hs-USB QDloader 9008
Ps: Sorry for my poor engliish and please help me
Hi!
That's what it should say in this circumstance. Google QHSUSB and you'll find the directions and Windows program to recover. You'll need the 10B TOT too.
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
mr.bushido252 said:
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
Click to expand...
Click to collapse
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
magma506 said:
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
Click to expand...
Click to collapse
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
pls can tell me what you do ihave h916n brocked
please i want to know if there is any update happened with you because i have also h961n and i cant find the image file
i tried to extract the rom into many .bin files but which file i should take to burn on the SD card
please this is my email: [email protected]
and facebook : the.amr.world
let me know if you have any new and off course me too i will inform you
LG H961N - Qualcomm HS-USB QDLoader 9008 Mode
mr.bushido252 said:
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
Click to expand...
Click to collapse
I have LG H961N, I tried the link mentioned. I used Samsung 32GB SD card, flashed H901 disk image (this seems to be a DD image, checked using Rufus). With the battery plugged in, the phone would turn on after 10mins and all I see is just the LG logo screen and nothing happens after that. I couldn't get it in download mode as it takes 10mins to get to the LG logo screen. Once I get the LG logo screen, I see "LGE androidnet usb serial port (com no.)" in the device manager. I tried LGUP, where the device type couldn't be identified for further process. Same thing with LGNPST, QFIL doesn't help. I wonder if the SD card should be 64GB as the disk image shows 58.24GB size in Windows Disk Management utility.
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
h901 with f600l brick
zeeshan18 said:
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
Click to expand...
Click to collapse
Yes help please ...
@zeeshan18 Follow this guide, make sure you find an image of the firmware that your phone was on.
@serdarkx Follow this guide, also find the corresponding firmware image.
Hi guys,
it's my first topic in this forum (sorry if my english is bad).
I have a problem with my LG L Fino (D290n). I get it with broken board, so I bought one - which have some issue I didn't know. It was recognised as qualcomm hs-usb qdloader, so I managed to unbrick it with BoardDiag. It seems to be formatted boot partition (I don't know why). I wasn't saw I used d295 .tot file, but after installing everything seems fine. Later I discovered that the SIM Card don't work.
I tried to install D290n kdz file using LG Flash Tool 2014, but it stops at 2%, but when I install d295 kdz it works fine.
Under battery is writen that this is D290n. Can that be a problem? And why I can't install proper kdz?
I have flashed a few phones, but this is first time I have problem like that.
This is written on board:
EAX66051401_1.0
D295f_MAIN (2)
Thanks for all help.
os lollipop I tried to upgrade via LG BRIDGE, then came the software update h90130c
i choose to upgrade to h90130c in LG Bridge
the upgrade process went smoothly until it was done (Preparing-downloading-updating-complete) it turns out I found my LG V10 off
but in my computer LG Bridge declared the process hard complete
I unplug the micro USB from my PC, then I try to live it, it did not respond
I try to charge it still does not respond to anything
but when i connect the micro usb to my computer, my computer responds there is a qualcomm port hs-usb qdloader 9008
then i try many unbrick methods on youtube but not yet
finally I try to ask my friend to solve this problem
he said my V10 901 should replace emmc
there is another method besides replace eMMC?
I'm trying to unbrick method on youtube, remove the battery and wait for it to continue I push the power button and volume it still can't respond or turn on
jika harus ganti eMMC , apa ada varian dari emmc v10 (h901) juga ? seperti emmc lg v10 h901 , emmc lg v10 h900 , emmc lg v10 vs990 , itu semua berbeda ?
atau emmc lg h901 sama untuk semua varian emmc lg v10 ?
thanks for respond
Sound like you may have the phone with korean mother board. Look at this thread:
https://forum.xda-developers.com/tmobile-lg-v10/general/unbrick-h901-f600l-board-2017-t3635697