Could someone help me please? There is an issue with RR on my Xiaomi Redmi Note 3 Pro.
When i install RR 5.8.5(2017-12-17)(after wiping both caches, system, data and then using the "Format Data" button in TWRP), the device gets in bootloop. If i connect it to the PC, i can hear system sound (never heard it before, probably Nougat sound signifying device getting connected to PC) but the boot still goes on forever. Sometimes, while connected to PC, boot could get to the point of finishing the boot animation with "Resurrection Remix" printed on screen, but then the screen suddenly goes black and nothing happens. The screen is active, but nothing shows up.
When i install RR 6.1.0(happened with both 2018-07-08 and 2018-06-25) (after wiping above mentioned stuff) the device keeps booting, but after some time it gets rebooted into TWRP.
Current MIUI version installed is MIUI8 Global Stable 6.8.18. Bootloader is unlocked officially. Android version before the wipe was Lollipop 5.1.1. ROMs were downloaded for Kenzo device from the Sourceforge. TWRP version - 3.2.2-0-kenzo. Firmware 8.7.3 installed from this thread on XDA: https://forum.xda-developers.com/red...lobal-t3574361.
I don't understand what am I doing wrong, please help. Thank you in advance.
just don't use RR
PurpleSnake said:
Could someone help me please? There is an issue with RR on my Xiaomi Redmi Note 3 Pro.
When i install RR 5.8.5(2017-12-17)(after wiping both caches, system, data and then using the "Format Data" button in TWRP), the device gets in bootloop. If i connect it to the PC, i can hear system sound (never heard it before, probably Nougat sound signifying device getting connected to PC) but the boot still goes on forever. Sometimes, while connected to PC, boot could get to the point of finishing the boot animation with "Resurrection Remix" printed on screen, but then the screen suddenly goes black and nothing happens. The screen is active, but nothing shows up.
When i install RR 6.1.0(happened with both 2018-07-08 and 2018-06-25) (after wiping above mentioned stuff) the device keeps booting, but after some time it gets rebooted into TWRP.
Current MIUI version installed is MIUI8 Global Stable 6.8.18. Bootloader is unlocked officially. Android version before the wipe was Lollipop 5.1.1. ROMs were downloaded for Kenzo device from the Sourceforge. TWRP version - 3.2.2-0-kenzo. Firmware 8.7.3 installed from this thread on XDA: https://forum.xda-developers.com/red...lobal-t3574361.
I don't understand what am I doing wrong, please help. Thank you in advance.
Click to expand...
Click to collapse
U must update ur device to latest miui. Which has marshmallow bootloader.
Custom roms wont boot with lollipop boootloader.
Flash latest marshamallow global stable or beta fastboot rom using pc. And then unlock and flash custom rom.
Maybe you need to update the firmware, or maybe there is some problem in the ROM itself. Try anyother build of RR
Related
Hello and first of all thank you for reading. I've a strange problem with my redmi note 3 pro.
i was chatting with it but suddenly it starts to have bootloops (mi logo flashes). I tried to restore it with recovery (it was still not unlocked) but nothing to do. So i flashed rom with the miflash and in edl mode (i tried latest stable, latest developer and first developer fastboot roms) but the bootloop was still here. So i tried to unlock bootloader with unoficial method (official says that my phone is linked to another account, absolutely false but i will come to this point later). Tried to flash zip with TWRP but still bootloops. I was tired and i tried cm13. It worked, phone boots and i was absolutely happy but dialer crashes when i receive calls. So i understand that my phone wants the boot.img of android 6.0 to not go into bootloop. I flashed (via TWRP) latest 6.0 based miui rom and it worked but still with dialer problem. I tried to unlock it but still no go. So i decided to try to sign out of my miaccount (yeah it was still there after flash with miflash in EDL mode, don't know why!) becasue it asked me to enter my password to use the phone when i boot miui 6.0 for the first time.
SO i Have absolutely no idea on what i should do. Phone bootloops when i use a 5.1 based rom, and with 6.0 dialer crashes. That's the strangest thing ever.
I tried many fastboot roms in edl and in fastboot, i tried custom recoveries and stock one, tried to unlock and relock bootloader. I tried basically everything (wipes, system-data-cache-internal) EVERYTHING!
please if you hava any idea i will be glad to try!
I've tried to restore a backup from another RN3P but still bootloop. Maybe is somethig related to the boot.img? changing it makes the phone boot.
Go to a Mi service center. They might be able to help you.
Which gapps you installed after you flashed cm13...
When i used stock package, my dialer was also crashing but when i used micro package, the problem was solved....
claudios91 said:
Hello and first of all thank you for reading. I've a strange problem with my redmi note 3 pro.
i was chatting with it but suddenly it starts to have bootloops (mi logo flashes). I tried to restore it with recovery (it was still not unlocked) but nothing to do. So i flashed rom with the miflash and in edl mode (i tried latest stable, latest developer and first developer fastboot roms) but the bootloop was still here. So i tried to unlock bootloader with unoficial method (official says that my phone is linked to another account, absolutely false but i will come to this point later). Tried to flash zip with TWRP but still bootloops. I was tired and i tried cm13. It worked, phone boots and i was absolutely happy but dialer crashes when i receive calls. So i understand that my phone wants the boot.img of android 6.0 to not go into bootloop. I flashed (via TWRP) latest 6.0 based miui rom and it worked but still with dialer problem. I tried to unlock it but still no go. So i decided to try to sign out of my miaccount (yeah it was still there after flash with miflash in EDL mode, don't know why!) becasue it asked me to enter my password to use the phone when i boot miui 6.0 for the first time.
SO i Have absolutely no idea on what i should do. Phone bootloops when i use a 5.1 based rom, and with 6.0 dialer crashes. That's the strangest thing ever.
I tried many fastboot roms in edl and in fastboot, i tried custom recoveries and stock one, tried to unlock and relock bootloader. I tried basically everything (wipes, system-data-cache-internal) EVERYTHING!
please if you hava any idea i will be glad to try!
Click to expand...
Click to collapse
I had a similar issue a while ago with a friend's Samsung. The service center people said that it was a RAM issue..
. If you can return the phone to wherever you bought it from, Do it ASAP and get another model...
Otherwise you might have to go to a service center and tell them exactly what you are facing. Before that i must suggest
Try installing a custom Kernel perhaps and see if it still bootloops
For every worst case software/firmware failure, full rom flash would be the one to solve it. Based on your story, it must be the hardware problem. So if possible, bring it to your nearest service center..
i really thank you for the reply but this phone comes from china and i'm in Italy so I have no warranty at all (including the fact i changed the screen) I think i will use it as an ipod. I've posted a log of the kernel bootloop so maybe someone with skills could help me!
that's the log! http://pastebin.com/b3CVcBAT
Hi! I have a weird issue. Any new roms like 7.1.2, 8.0etc are just not booting up in my redmi note 3. I always get stuck at the boot logo. The phone vibrates and hints as if it is going to boot up boot its not. The process continues and the phone doesn't boot up. It works all fine with the older roms. But with newer version the roms dont boot up. I tried several roms like Nitrogen,RR,Linege OS etc. But newer versions of both Nougat and Oreo roms don't boot up. I don't have any clue of what to do now. I have zcx twrp installed and have officially unlocked the bootloder. Please if anyone have any insight regarding the issue it will be helpful.
Thank You.
Check whether the bootloader is still unlocked by commands. Twrp in this case, is useless so flash MIUI official rom & again unlock officially.
Make sure you wipe everything in Twrp if the command says bootloader is unlocked.
Try flashing LazyFlasher after the ROM. Also, are you flashing the recommended firmwares before flashing the ROM?
Update modem (firmware). Either by: flashing latest MIUI Beta fastboot rom or from here
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
mynameisvineeth said:
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
Click to expand...
Click to collapse
First of all I have to assume that you are sure that you have Redmi 5 plus (Vince) and not Redmi Note 5 Pro (Whyred), if this is the case let´s go to the next.
Any Miui rom encrypts data by default at least from oreo so no way to avoid this, if you flash a Miui rom then your data wont´be accesible and the next rom to be flashed you have to sideload it via adb (there are other ways).
I think you missed something here, if you flash a mui rom and over it a pie rom then there´s no way that your device reboots to system. You only have to flash firmware 8.1 from miui not the whole rom.
Start this from the scratch; I recommend OrangeFox recovery instead of TWRP so it has more features https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
- Before to flash nothing In orangeFox recovery enable the options DM-verity and disable force encryption, you will find too options to keep OTA and others, check which you want.
- Flash the firmware miui 8.1 https://androidfilehost.com/?fid=11410963190603850663
- Flash the pie rom for vince (may not apply for a GSI pie)
- Flash the Gapps (if needed)
it´s all.
Just a tip; be careful with changing system of files at any time so if the process is cutted/interrupted for some reason your device could be seriously damaged.
it does. you just need to flash firmware file first.
community, i need your help.
today i unlocked bootloader on my pocophone f1.
then i followed instructions for flashing twrp. i flashed latest version of twrp (from twrp official site), then flashed "disable force encryption", clicked "reboot" and the phone just keeps rebooting on opening screen with "pocophone by xiaomi" logo. i went back to twpr, cleared dalvik/cache and did factory reset and result is the same.
before flashing twrp i was on latest global stable miui 11.0.4 (android 10).
what went wrong and how to fix this? thank you in advance!
kopitaneskita said:
community, i need your help.
today i unlocked bootloader on my pocophone f1.
then i followed instructions for flashing twrp. i flashed latest version of twrp (from twrp official site), then flashed "disable force encryption", clicked "reboot" and the phone just keeps rebooting on opening screen with "pocophone by xiaomi" logo. i went back to twpr, cleared dalvik/cache and did factory reset and result is the same.
before flashing twrp i was on latest global stable miui 11.0.4 (android 10).
what went wrong and how to fix this? thank you in advance!
Click to expand...
Click to collapse
Im also new to this thing, but i have suggest you to flash to stock first to fix bootloop.
My method is using XiaoMiFlashTool, before that you need to have stock rom to flash and rename it to PIE.
I also put that folder into desktop. ( more detail maybe you could search on youtube i think )
Then, bring your poco to fastboot mode, then open your MiFlashTool click refresh if device doesnt popup. when device is detected you can start flashing, and ur poco should be fixed from bootloop. ( also makesure you checking on left bottom corner before flashing, there is option you could choose. )
Next step just install your TWRP and disable encrption and install magisk afterward.
Iam not really good at explain thing, but i trying :laugh: thats what i do when my poco softbricked. maybe someone could correct me if iam wrong. but this is what iam doing so fat, there's no problem until now :fingers-crossed:
i solved it... it seems twrp installing somehow deleted miui system from my phone. now it's all ok.
thanks anyway.
kopitaneskita said:
i solved it... it seems twrp installing somehow deleted miui system from my phone. now it's all ok.
thanks anyway.
Click to expand...
Click to collapse
How did you solve? By reflashing MIUI using MI flash tool? Or by installing custom rom? Were you able to reboot to twrp?
first of all, you must be fully concentrated when installing twrp, because twrp can delete your system, like in my case.
yes, i was able to reboot into twrp always. then i installed xeu rom to check if everything is ok. and it was.
Without data loss, is this method come back to normal as before for poco f1 mobile?
DOYANMAIN said:
Im also new to this thing, but i have suggest you to flash to stock first to fix bootloop.
My method is using XiaoMiFlashTool, before that you need to have stock rom to flash and rename it to PIE.
I also put that folder into desktop. ( more detail maybe you could search on youtube i think )
Then, bring your poco to fastboot mode, then open your MiFlashTool click refresh if device doesnt popup. when device is detected you can start flashing, and ur poco should be fixed from bootloop. ( also makesure you checking on left bottom corner before flashing, there is option you could choose. )
Next step just install your TWRP and disable encrption and install magisk afterward.
Iam not really good at explain thing, but i trying :laugh: thats what i do when my poco softbricked. maybe someone could correct me if iam wrong. but this is what iam doing so fat, there's no problem until now :fingers-crossed:
Click to expand...
Click to collapse
Without data loss, is this method come back to normal as before for poco f1 mobile?
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
To check:
TWRP/O.F
wipe/format data type yes
reboot Twrp/O.F
Flash latest firmware (if necessary).
Flash the rom as instructed by the OP.
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
Use TWRP by REIGNZ based on A12 system_ext. You can find it my POCO F1 Ultimate Collection & Guides along with Guides for clean installation.
P.S: Near the link of twrp by reign you will also find a link for the current bugs/issues and workaround for them.