Emergency charger for Amazfit Stratos - Amazfit

Hi, guys!
I bought a Stratos but the original charger does not work.
- When i plug the original charger in a USB port on my PC and the watch is ON the screen do not show any signs of charging.
- When i plug the original charger in a USB port on my PC with the watch OFF and wait some seconds and i'd press the on/off button the screen show me that the watch is charging BUT the ammount of battery goes down!
- When i plug the original charger on a cellphone charger doesnt matter if the watch is on or off the screen do not show any information about charging.
Please i really need some help, the watch battery is at 10% and i'd turn it off.
Thank you guys for the help!!

If the original charger is faulty, you should order 1 or even 2 of this: https://www.gearbest.com/smartwatch-accessories/pp_009720167579.html?wid=1433363
It has removable USB cable, so you can use your own.

Thanks for the reply! I've tried the procedure with an usb cable direct contact but the watch do not charge too...

D0B3RM4N said:
Thanks for the reply! I've tried the procedure with an usb cable direct contact but the watch do not charge too...
Click to expand...
Click to collapse
You're welcome. I've ordered 3 of them, because for $5/pce it's inexpensive - I'll let you know if it's a good replacement of the original charging cradle or not. I'm sure the cradle has a controller circuit inside, so you can't just touch the wires to the pins.

5tormChild said:
You're welcome. I've ordered 3 of them, because for $5/pce it's inexpensive - I'll let you know if it's a good replacement of the original charging cradle or not. I'm sure the cradle has a controller circuit inside, so you can't just touch the wires to the pins.
Click to expand...
Click to collapse
I already have one of those, it works fine but is much lighter than the original dock, feels cheaper and maybe more brittle? Time will tell, it's my backup dock anyway

Quinny899 said:
I already have one of those, it works fine but is much lighter than the original dock, feels cheaper and maybe more brittle? Time will tell, it's my backup dock anyway
Click to expand...
Click to collapse
Good to hear they at least work.
Yeah, the original is quality stuff, but I hate the fixed USB cable, which seems to be very thin and fragile and which is a step backwards from the Pace's replaceable solution.
I've ordered 3, because it was around $5 ordered from within the GearBest app, and I had a lot of GB points lying around.

5tormChild said:
Good to hear they at least work.
Yeah, the original is quality stuff, but I hate the fixed USB cable, which seems to be very thin and fragile and which is a step backwards from the Pace's replaceable solution.
I've ordered 3, because it was around $5 ordered from within the GearBest app, and I had a lot of GB points lying around.
Click to expand...
Click to collapse
Exactly why I bought one - The original dock sits on my desk and is used 90% of the time for charging and development, the Gearbest one sits on my bedside for the very rare time I charge my watch overnight - where I have a MicroUSB charger already for bluetooth headphones so it just plugs in
Agreed on the step backwards, the Pace dock was much better all around in my opinion, the Stratos one always feels like it's going to break when I remove the watch

Hi, DOB3RM4N,
did U fix the problem with new charger? I have same issue...
Thx

Related

Cingular 8125 Desktop Cradle FINALLY!!!!!!

BoxWave's new Desktop Cradle for the Cingular 8125
Check it..........
http://www.boxwave.com/products/desktopcradle/cingular-8125-desktop-cradle_1053.htm
But cannot...
Still can't charge a spare battery. Wonder why they aren't making one that can charge a spare battery espcially when battery power is such an issue with this phone! :evil:
Still no spare battery charger:
http://shop.brando.com.hk/dopod838usbcradle.php
Here's another source for the horizontal cradle:
http://www.thepocketsolution.com/Me...reen=PROD&Store_Code=PS&Product_Code=PSI-9219
Anyone have any experience with this or the vertical one? Pros, cons?
Paul
Vertical cradle
I just purchased a vertical cradle from an outfit in the UK (Hamill Dist.) but haven't received it yet. I based my decision on a favorable report from HTC Wizard Web (http://www.htcwizardweb.net/node/510). The Ebay unit looks identical, and I figured it wasn't rocket science and basically a plastic holder with USB connector at the bottom.
I'll report back when I receive it and test it out.
Vertical cradle
I just purchased a vertical cradle from an outfit in the UK (Hamill Dist.) but haven't received it yet. I based my decision on a favorable report from HTC Wizard Web (http://www.htcwizardweb.net/node/510). The Ebay unit looks identical, and I figured it wasn't rocket science and basically a plastic holder with USB connector at the bottom.
I'll report back when I receive it and test it out.
I bought
the boxwave vertical cradle and have been using it for a couple of weeks. Not a bad design, but could be better. Needs a spare battery slot. Also, the mini-usb connector is sort of long and you have to be carefull when putting the phone in and out of the dock. I'm afraid I might break it off in the phone at some point. Nothing like that has happened yet, but it just doesn't feel bullet proof.
I'm using an old Rolodex card holder with my sync cable as a horizontal cradle...works absolutely great! The 8125 happens to be a near-perfect fit when oriented horizontally. Pulled it our of my office's back room right before it was going in the trash...
http://www.arsmar.com/emporium/IMG/c07a-Rolodex-2.jpg
I am using the Boxwave one. Here are my thoughts:
1) I also am using the FlexiSkin. The 8125 does fit with the skin on, but you have to remove the cradles clear plastic support piece (or just leave it off to begin with).
2) Connection - the power part charges easily, but the sync part takes a little more wiggling/time to work than I am used to with the OEM USB cable. I am not sure if it is because of the FlexSkin, the cradle or what...I'll test it out.
3) Design. It is light, and you have to operate with 2 hands to put on and remove. My sync cradle for my old Casio E125 had this lift button to remove the device easily, and I wish this did.
4) Bottom is covered. If you plan ahead, no biggy. I just keep a spare stylus by the cradle because I kept forgetting to remove it before syncing. You may also want to have your bluetooth headset ready, because answering the phone is a little awkward (whether removing the device, or using speakerphone). No way to use a wired set - the plug is covered.
Cradle and spare battery charger
I found a cradle charger that has a spot for a spare battery on Amazon.com I recived it a few days ago and so far so good. Nice to have two batteries
peraltah said:
I found a cradle charger that has a spot for a spare battery on Amazon.com I recived it a few days ago and so far so good. Nice to have two batteries
Click to expand...
Click to collapse
A link would be nice....
Is this the one?
Cradle/Spare Battery Charger for Wizard
blazoner said:
A link would be nice....
Is this the one?
Click to expand...
Click to collapse
Yes sir it is. It works really well so far
Peraltah:
Does it come with that extra battery as well, or just the charger?
KarmaNP said:
Peraltah:
Does it come with that extra battery as well, or just the charger?
Click to expand...
Click to collapse
Just the chargers. It comes with a usb cable to attach it to the computer and a normal american outlet charger. If you buy them off of ebay I remember seeing one that comes with a battery. I dont trust the battery that it comes with though I rather just spend the extra cash and be sure of the quality of the battery. Hope this helped
Peraltah,
Thanks for the info. I did order one and I think from what I read one 1100 mah non OEM battery comes with it, will see when it comes to me. See the link below in the product features.
http://www.amazon.com/o/ASIN/B000IHNBOW/ref=pd_rvi_gw_1/103-6458678-6693459
KarmaNP said:
Peraltah,
Thanks for the info. I did order one and I think from what I read one 1100 mah non OEM battery comes with it, will see when it comes to me. See the link below in the product features.
http://www.amazon.com/o/ASIN/B000IHNBOW/ref=pd_rvi_gw_1/103-6458678-6693459
Click to expand...
Click to collapse
Damm your right man! I didnt get one! lol I will email them right quick. THANKS!
Ok I checked the item mine was like 17 bucks the one with the battery is like 30. I already started *****ing to the people till i looked closer! lol
Check out this NEW one:
http://www.amazon.com/Cingular-Smar.../B000K8ET6S/ref=pd_sbs__2/102-2837548-9417744
repsol47 said:
Check out this NEW one:
http://www.amazon.com/Cingular-Smar.../B000K8ET6S/ref=pd_sbs__2/102-2837548-9417744
Click to expand...
Click to collapse
But it doesnt have the spare battery charger
that would have been a nice addition.
I've just got an ok one from ebay, it doesn't have room for spare battery unfortunatly, but comes with built in usb cable and also a charger so you can have both plugged in, so when pc is on it will charge through usb and when off will charge from mains,
http://cgi.ebay.co.uk/O2-XDA-Mini-S...DVWQQrdZ1QQcmdZViewItem?hash=item300064799786
check out these. for this price you could charger 13 spares.
http://cgi.ebay.com/FOR-T-MOBILE-MD...ryZ20368QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
zc57 2X Battery+Charger For HTC Wizard 838 100 200

Crappy charger/usb cable, use it with care

*Sigh*...
Had the same problem with the TF101... After a while the tablet suddenly wouldn't charge anymore and it turned out to be the cable which suddenly went bad.
Now again the exact same problem with the TF201. This is pretty damn annoying, will contact customer support but am wondering if someone has experience with ebay cables that do work.
Already bought this one: http://www.ebay.nl/itm/ws/eBayISAPI.dll?ViewItem&item=130678359515&ssPageName=ADME:L:OU:NL:1123
But of course that doesn't properly charge either (oh, and I still have an original cable from the TF101 which works fine, so it definitely IS the cable). The tablet responds (turns on) and charges as if connected to USB port of the pc or something but doesn't fast charge. (Pins seem fine, nothing out of the ordinary to be seen).
So also a warning, be careful with charger and cable! Like the rest of the prime it is very sensitive to malfunctioning :/ Quite disappointed that they didn't address this with the TF201 as charger and cable were an issue with TF101 as well.
do you always yank the cable directly to detach ur device from the charger? I've been using mine for a long time now, it's still as good as new and charging well.
The key is to treat the cable like cheap failure prone chunk of crap that will fail. I got a second cord for power immediately. http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Just took one look at that thin usb cable to know it isnt built to last.
when I was a kid stuff that was "made in Taiwan" was to be avoided, ironic.
MXR2 said:
do you always yank the cable directly to detach ur device from the charger? I've been using mine for a long time now, it's still as good as new and charging well.
Click to expand...
Click to collapse
Ehm, nope... I use it with care. Never pull at the cable but just take it out at the connector itself. But I guess you should always keep it in one straight line or something.
whycali said:
The key is to treat the cable like cheap failure prone chunk of crap that will fail. I got a second cord for power immediately. http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Just took one look at that thin usb cable to know it isnt built to last.
when I was a kid stuff that was "made in Taiwan" was to be avoided, ironic.
Click to expand...
Click to collapse
Hmmm, nice option... I think I also have a proper power adapter which simply supplies 12v all the time (where the asus one switches to 5V once fully charged). Does that matter? Being at 12v all the time?
This guy seems to have analyzed it pretty well. http://forum.xda-developers.com/showthread.php?t=1377669
dagrim1 said:
Ehm, nope... I use it with care. Never pull at the cable but just take it out at the connector itself. But I guess you should always keep it in one straight line or something.
Hmmm, nice option... I think I also have a proper power adapter which simply supplies 12v all the time (where the asus one switches to 5V once fully charged). Does that matter? Being at 12v all the time?
Click to expand...
Click to collapse
After I'm done charging, I will keep them in a storage bag. Well TBH, I do fear that it's gonna fail. Coz it looks like a damn apple charger. that weak link
Put the power brick in the freezer for 45 minutes!
It fixes it for awhile.
My cable just went bad yesterday exactly the same way.
Gladly I've had a spare one that I have bought from ebay couple months ago.
I have to get another spare one I think...
xTRICKYxx said:
Put the power brick in the freezer for 45 minutes!
It fixes it for awhile.
Click to expand...
Click to collapse
The power brick isnt the issue... The cable from the TF101 works on both chargers, the cable of the TF201 on neither. The TF101 one is also from a spare powerbrick I bought coz I originally thought the charger was the issue as well. It's just a very feeble charger and cable, again...
whycali said:
http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Click to expand...
Click to collapse
This power connection is also a lot better fit for the dock power connector. I always felt like the one that came with my prime was going to fall out of the dock.
I have had the same issue. I bought the TF-101 for my daughter, and the first cable had the insulation sliding off near the connector after about a week. I saw that my daughter would rest the tablet on the connector at awkward angles, so I lectured her about being more careful and bought two more cables. When she went through those in a few months, I bought 5 extra cables. I know she is being more careful with them now, because they still look new when they stop charging. One of the cables I bought never worked. We are now on the last one of the batch, so I just bought 12 more.
It hasn't gone unnoticed that I am financially rewarding Asus for producing a shoddy product. We call that "the invisible hand of the market", right?

HTC One X iBolt Charging Car Dock (fits w/ case)

i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"

Magnetic Chargers

I've been looking for a charger that attaches to the side dock on the Z2. I bought one on EBay very cheap but the charging from seems to connect then disconnect all the time. I guess that's what I get for buying a cheap unit. Is there a good one that will charge the Z2 properly? I'm sure the flap to the micro usb is going to come off sooner or later so I'd rather use the magnetic one.
I too am looking for this. What eBay one did you buy? Don't want to accidentally buy a cheap one..
Ljungan said:
I too am looking for this. What eBay one did you buy? Don't want to accidentally buy a cheap one..
Click to expand...
Click to collapse
It was one that said "black magnetic adapter charger" from the UK it was only £2.95.
I'm happy with 'kwmobile' charger bought on amazon.de, especially I like the fact that magnet is not too strong therefore I don't have a fear that magnetic port will fall out. I hope so ... :fingers-crossed:
sarobi said:
I'm happy with 'kwmobile' charger bought on amazon.de, especially I like the fact that magnet is not too strong therefore I don't have a fear that magnetic port will fall out. I hope so ... :fingers-crossed:
Click to expand...
Click to collapse
I bought a dirt cheap one from ebay too, works fine although the magnets aren't very strong so the amount of time I spend fiddling to get it to latch on I may as well use a micro usb!
http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Best I've come across, a bit more expensive though.
It fits very snugly over the charging port, so if you use case this cable might not go well with it.
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
kylecummins said:
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
Click to expand...
Click to collapse
Gentle Alarm will, it isn't free, but it's worth the cost.
Goldfire said:
Gentle Alarm will, it isn't free, but it's worth the cost.
Click to expand...
Click to collapse
I've heard that, I got a free app called timely and it works great, with smart connect it automatically goes into silent + opens timely when I dock.
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
kylecummins said:
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
Click to expand...
Click to collapse
The aosp default works well. Also available as clock+.
Sent from my GT-I9300 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2731066
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
drknezz said:
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
Click to expand...
Click to collapse
The same happened to me but after when i attempted to charge via the USB from PC or magnetic charging points the phone kept going into an odd loop of trying to charge itself and failing, i had to restore my TA and relock my phone and RMA it, will get a new one in a few days and i won't ever be doing that stupidness again
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
wow...thanks for the advice...
as far as magnetic chargers I too bought the magnector x... it should be coming in the mail soon... expensive but i hope its worth it
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
Wait What?
You CAN put it the wrong way?
One side is clearly bigger and iirc the charger doesnt fit the wrong size!
Haldi4803 said:
Wait What?
You CAN put it the wrong way?
One side is clearly bigger and iirc the charger doesnt fit the wrong size!
Click to expand...
Click to collapse
Trust me you can
Dock clock is my second favorite bedside clock and the one that I use(my favorite is Motorola's but it only works on their stock ROMS-they probably dropped it from their newer phones/firmwares as they did with everything else they did better then everyone else).
drknezz said:
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
Click to expand...
Click to collapse
Mine does that when putting it the correct way without every putting it the wrong way. It also does the start/stop charging like the OP, hopefully he doesn't have the same problem as me.
Sent from my D6503 using Xparent Red Tapatalk 2
upon close inspection, the charging pins on the magnetic charging port are different in size to prevent plugging it backwards.
for those of you who were able to plug it in backwards, is the magnetic charger a sony accessory? or aftermarket?
I bought the magnector x and holy moly does it charge fast...and the connection is solid and it snaps in place with ease...magnet very strong...only problem is it doesn't work with my roxfit gel shell case even though it has the cutout for the magnetic port...so either I stick with using my cheap Chinese made magnetic charger that doesn't always make a solid connection and charges rather slow but works with my case or buy the case-mate barely there case which is the only other case I can see that would work with the magnector x...
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app

[Q] few questions about the magnetic charger

for those who have it and used it for long time..
1) is it charging faster/slower/same than regularly charging? (with the same charger of course)
2) is it actually comfortable? after trying it, do you actually use it daily and enjoy or its a gimmick only and you went back to the regular cable?
3) is it causing any damages? bugs? weird stuffs?
I'm Z owner (it doesn't compatible with magnets) and I'm considering to upgrade to z2/3/3c with mainly reason of the magnetic charging..
Some experience sharing would really help me out here.. YouTube is only for unboxing and showing it but no real tips from experienced users..
Thanks.
Been using magnetic chargers for bout half a year. So far:
1) The charging time is pretty much the same. I've been using the cheap chinese ones and haven't noticed a significant increase in the time it takes.
2) If you're willing to buy an expensive cable, I suppose the magnet would be stronger, but in my one dollar case it disconnects pretty easily. So it's not really comfortable when you have to keep the phone on a flat surface while charging. But people use magnetic cables to prevent the wear and tear of the flaps, and so do I.
3) No bugs, it's just a charger. The only thing that can go wrong is having your battery fried if you plug the cable incorrectly
1) same speed which actually depends more on used charger than the cable type
2) for charging I use only magnetic cable or cradle. In fact I used USB cable for maybe 2 days only and will never return back
3) lockscreen rotates according to the gravity sensor, otherwise no difference or issue
It's worth the investment. Really helps to protect the flaps and save time opening them
Sent from my D6503 using XDA Free mobile app
Thank you all!
Just make sure you never attach the cable inverted, otherwise it will fry not only the battery, but the whole motherboard. and also, make sure that nobody tries to charge it but you, as most people are careless and might attach it the wrong way. I have heard some dreadful stories about inverting the magnetic cable, this is a major design flaw from Sony, but again, all of those cables are fake and there is no genuine one from Sony, but only the dock, I don't know whether the phone can be put the wrong way in the dock as well. I have bought one for 9$ and working great, except the magnet isn't strong enough and it gets detached very easily. Good luck
Make sure u bought a high quality/expensive magnetic charger or u will regret, just like me. Ive using the local/cheap magnetic charger, and im really pissed off, the led charging keep blinking even if an ant pass through. This is what im using now, and i recommended for u too. http://www.amazon.com/Magnector-Improved-Performance-Magnetic-Charging/dp/B00Q3GK3YI
karim-ps said:
...........this is a major design flaw from Sony, but again, all of those cables are fake and there is no genuine one from Sony, but only the dock, I don't know whether the phone can be put the wrong way in the dock as well.
Click to expand...
Click to collapse
actually it's not!
If you take a really close look you see that one of the pin's has a bigger plastic encasing. So it "shouldn't" be possible to connect the magnetic charger the wrong way.
And about the Dock... who would try to put the phone into the dock with the display facing the wall? xD well okay... yeah... if it's dark and you're drunk... i can totally see me doing this....
BTT: i can reccomend this Magnector cables! i have one myself, after i bough 3 in China this is the first one working correctly, aka charging fast enough.
Haldi4803 said:
actually it's not!
If you take a really close look you see that one of the pin's has a bigger plastic encasing. So it "shouldn't" be possible to connect the magnetic charger the wrong way.
And about the Dock... who would try to put the phone into the dock with the display facing the wall? xD well okay... yeah... if it's dark and you're drunk... i can totally see me doing this....
Click to expand...
Click to collapse
Just google for Z ultra magnetic charger options and you will see how many motherboard got fried from inverted mag charger. I know that there are to pols one is a bit larger but still, the connector can enter the wrong way, at least some connector.
Hi, i bought the dk36 dock with magnetic charger on amazon, cheaper than the official sony shop, it charges in the same time. A friend told me that the magnetic cables are very bad, they are very cheap but can make the phone burn because of the low quality as you say.
manolilloi said:
Hi, i bought the dk36 dock with magnetic charger on amazon, cheaper than the official sony shop, it charges in the same time. A friend told me that the magnetic cables are very bad, they are very cheap but can make the phone burn because of the low quality as you say.
Click to expand...
Click to collapse
Your friend doesn't know anything about electronics. Do you even know how the magnetic charging works? The only bad thing that can happen from chinese docks is slow charging. I have a DIY magnetic cable and it works great in terms of speed(it had a really weak magnet and a dock came with my Z2, so I don't use it anymore). Reverse polarity is unlikely to happen-most mag connectors are keyed. But anyways, be careful with the orientation.

Categories

Resources