Related
Hey folks,
So i got my Atrix from RMA today, it has a new mainboard, had WLAN errors before. Tried to unlock it with ihop_bell.sbf, like last time, but it failed. Now it says failed to boot 1, the bootloader is still locked, because fastboot does not know oem unlock.
I can enter fastboot mode. If I start and press volume down it says something about nvflash for 0.5 secs and turns off. RSD detects it as SE Flash Olympus and I can start flashing, but it always fails at "Switching to BP Pass trough mode".
So what now, is it hardbricked?
Before flashing did you check your FW version (i.e. Build number/version) to see what type it was, sometimes after installing new parts they will turn it on and test it to see how it works and may hit update while at it to make sure it is ready to go out of the box
Should be the German Retail 2.3.4, did not check it though. Just made sure the WiFi Error is gone.
Uh, you might have wanted to check. You always want to ensure software revision numbers before attempting the unlock. Even some retail updates can have minor build changes that could result in your bootloader unlock bricking your phone.
So moto-fastboot is not responding to the CMD "oem unlock"? I am just going over all the info to see if I can help, I have had the "Failed to boot #" issue with a multitude of Moto's (CDMA and GSM, and my global Photon) I have also been able to fix them. Was your device fully charged before attempting the SBF flash? that will kill an SBF flash and possibly the phone.
---------- Post added at 01:29 PM ---------- Previous post was at 01:20 PM ----------
It would also appear that FTB 1 is related to not having atleast 50% charge available during the flash. You may want to get a battery charger for it and charger the phone and attempt a flash from there. This thread has a little info in it (if you read the on topic stuff) http://forum.xda-developers.com/showthread.php?t=1491788 . Good luck my friend, I know how it feels, If you have any questions let me know.
Edit: If you can get fastboot to atleast give you info on any bootloader variables (fastboot getvar <variable request>) then you may be able to find out if their was a software revision, i am unsure at this time
OMG!
After I tried flashing the international unlock like 5 times more again and the same error ocurred, I tried to unlock in fastboot after ur last post and IT WORKED
TBH I am a little bit confused, because 1 hour ago it(the unlock) did not work and really can not understand what was wrong before. Still on the same battery.
Now it is unlocked and the message is gone, I can enter e.g. the RSD mode or the recovery.
Maybe it had to do with battery indeed, I dont know, just happy that it works again. Thanks for posting mate!
Haha, That's good. Hope it stays going well for you. I hated when I flashed pudding and it failed then ran the OEM unlock code just to see if it would continue, sure enough it did. Glad to hear it is fixed
This is a problem, and it's doing my nut. I have a Vodafone Smart Mini 7, which I desperately want to root, to get all of Google's bloatware and the stuff the original network provider put on it.
I've already unlocked it to all networks, but the bootloader is being a PITA. I've done the usual with adb and fastboot, namely put it into USB Debugging, and then done this;
Code:
adb devices
adb reboot bootloader
fastboot getvar all
When I get to the section on the bootloader, it advises me that it's Secure.
I tried to use
Code:
fastboot oem unlock
and when I confirm on the phone that I want to unlock it, I get told that Remote Unlock is not allowed.
I assume that the fact that fastboot getvar all says that the bootloader is secure, means I need some sort of key to get it off. My old network provider don't know where to get it from, my tech team don't know where to get it from and I'm screwed.
Anyone got any ideas on whether I can get round the "secure" part of this, like some way of finding the key for it? Thanks
TootyRooty said:
This is a problem, and it's doing my nut. I have a Vodafone Smart Mini 7, which I desperately want to root, to get all of Google's bloatware and the stuff the original network provider put on it.
I've already unlocked it to all networks, but the bootloader is being a PITA. I've done the usual with adb and fastboot, namely put it into USB Debugging, and then done this;
When I get to the section on the bootloader, it advises me that it's Secure.
I tried to use
and when I confirm on the phone that I want to unlock it, I get told that Remote Unlock is not allowed.
I assume that the fact that fastboot getvar all says that the bootloader is secure, means I need some sort of key to get it off. My old network provider don't know where to get it from, my tech team don't know where to get it from and I'm screwed.
Anyone got any ideas on whether I can get round the "secure" part of this, like some way of finding the key for it? Thanks
Click to expand...
Click to collapse
I have the exact same issue I read some threads and nothing solid has come out of it some say they managed to get root but others say they bricked the phone
Any news on this topic? I too have one i desperately would like to root because it is permanently full and you cant do anything wih it. The Google apps and the apps installed by my service provider take up all the onboard storage space. I downloaded only Whatsapp and Facebook Lite and bam,the phone is completely full and useless as it cant do updates,runs extremely slow and does all sorts of random stuff like restarting on its own etc. driving me utterly insane.
Motorola G4 XT1625
Minor Problem: Phone will not start normally, only boots into Fastboot mode.
Minor Problem: Phone is oem Locked
Major Problem: I never went into "settings" on the phone and ENABLED OEM UNLOCKING.
Question: Is it possible to get this phone flashed with stock ROM?
A little background. Not a developer, phone started acting up a few days ago, shutting down or rebooting on its own, do not remember anything such as an update or my clearing of the cache occurring in that time frame, but I was still hoping it was a software issue that would work itself out. Now the phone fails during start up and reports this
STARTUP FAILED
ERROR: Failed to pass validation , backup to fastboot.
It does mention I should use Software Repair Assistant to recover the phone, which correct me if I'm wrong , only works with Verizon phones. I did try the SRA, it connected to the phone, but would stall about halfway through.
I have found much info on this forum regarding unlocking the bootloader of this phone, I have installed on Moto tools on my PC, requested and received an unlock code, connected to the phone and can send commands via command line. Unfortunately when I send the oem unlock the phone responds that I need to enable development mode in settings, which I cannot get to because the phone wont boot to the OS. Is there an easy way around this that I'm just not seeing?
In the end the problem may be hardware related, I just hate to give up on it so easily. Contacted Motorola about the device, as it turns out the unit was 6 days out of warranty ( that's if you use the Amazon ship date, it was only actually 2 days out if you use the activation date). Their response was as expected, sorry can't help you, thanks for being a Motorola customer, have wonderful day, next........
MSC 1/24/18
UPDATE: This phone is money down the drain unless I can unlock and root it. If you can help me do that successfully, I'll pay you $20. Just to end this frustration.
UPDATE: Cash offer rescinded. I fixed the problem by buying a different phone and giving up on this one.
Question: How do I fix the OEM Unlocking option not appearing on a Samsung A01 (SM-S111DL)?
Answer: By giving up on it and buying a different phone.
Maybe this is a better forum to post this. I have a Samsung A01, SM-S111DL. I want to root. I want Magisk on there.
I have been searching, and searching, and searching for any useful tutorials on how to root this specific device. In addition to searching, I have also been searching. And besides that, completely apart from that, I have been searching. So nobody better tell me I haven't tried figuring this one out for myself.
So far, I can't find anything that works. I just can't. Partly because tutorials keep telling me I need to turn on the OEM Unlocking option, and it ain't there. I know where it's supposed to be, between Bluetooth HCI and Running Services, and it's not there. And I tried the Date & Time trick, and it didn't help.
So, if I can't turn that option on, what can I do? I was thinking about trying Heimdall. It was unable to print the PIT, but I managed to download a PIT that supposedly corresponds exactly to my device. It's labeled A01Q_USA_TFN.pit. I also downloaded the full firmware with Frija, and extracted stuff. I took the boot.img from the downloaded firmware and patched it with Magisk. I was thinking of installing it, but then I said, no, I better wait until some experts weigh in on this. Best case, the flash would go just fine. But then there are two bad cases. One, Heimdall won't even be able to flash, and that will mean more anger and frustration. Two, it'll brick the device. And I'm not even sure which is worse anymore.
This point, I don't even know what the hell to do. Please, someone help.
Also, I'd like to have TWRP on this device. But I don't know whether there's a version out yet. Sure, there's one for some other model of A01, but would it work with mine? I just don't know, and I'm feeling too discouraged to try.
Please, someone help.
Did you search before posting? I see many, many threads regarding rooting the Galaxy A01, including one you posted 7 days ago on the same topic.
V0latyle said:
Did you search before posting? I see many, many threads regarding rooting the Galaxy A01.
Click to expand...
Click to collapse
Did you read before replying? I told you many, many times that I searched.
FailSafeNow said:
Did you read before replying? I told you many, many times that I searched.
Click to expand...
Click to collapse
My point is, creating a new post isn't always the best course of action when there's already discussions on the topic. Secondly, do not create multiple threads on the same topic.
If OEM Unlock is not available, you won't be able to unlock the bootloader, which will prevent you from flashing custom images (such as the patched boot image). You could try using Odin to flash an older firmware version and see if OEM Unlock becomes available.
Here's a couple things you can try. First, remove your SIM and turn off WiFi. Then, disable Automatic Date & Time, and set the time ahead by at least 1 week. If the OEM Unlock toggle does not appear, just wait a while.
Apparently, this has something to do with Knox.
If you want to check whether unlocking the bootloader will be possible at all, you can use ADB:
Code:
adb shell getprop ro.oem_unlock_supported
If this returns 0, unlocking the bootloader is not possible at all.
If this returns 1, then you just need to be able to access the OEM Unlock toggle, which will set get_unlock_ability to 1 and permit unlocking the bootloader, at which point you should be able to flash a patched boot image.
See this article for more information.
V0latyle said:
My point is, creating a new post isn't always the best course of action when there's already discussions on the topic. Secondly, do not create multiple threads on the same topic.
If OEM Unlock is not available, you won't be able to unlock the bootloader, which will prevent you from flashing custom images (such as the patched boot image). You could try using Odin to flash an older firmware version and see if OEM Unlock becomes available.
Here's a couple things you can try. First, remove your SIM and turn off WiFi. Then, disable Automatic Date & Time, and set the time ahead by at least 1 week. If the OEM Unlock toggle does not appear, just wait a while.
Apparently, this has something to do with Knox.
If you want to check whether unlocking the bootloader will be possible at all, you can use ADB:
Code:
adb shell getprop ro.oem_unlock_supported
If this returns 0, unlocking the bootloader is not possible at all.
If this returns 1, then you just need to be able to access the OEM Unlock toggle, which will set get_unlock_ability to 1 and permit unlocking the bootloader, at which point you should be able to flash a patched boot image.
See this article for more information.
Click to expand...
Click to collapse
Thank you. I've tried various tricks with the date, to no avail so far. But I will try the trick the way you said it, and try waiting. Incidentally, I have no sim. Just got this phone off eBay. Never planned on putting a sim in it. Just wanted it for usage as a wifi device.
So far, no OEM Unlocking option has appeared. But I'll wait on it, like you said. And yeah, I've read that these devices are made to have some kind of waiting period.
I also read that you had to be on Android 11 before you could get the unlocking option. So that's what I'm on. As for Odin, it gets stuck on the analyzing phase and never actually writes anything. Heimdall gives me an error of -12 when I try to use it. I've tried installing drivers on my computer with Zadig, but it hasn't changed anything so far. And it has a lot of options for drivers and stuff, so I don't know which are even the right ones. (I'm on Windows 10 Pro.)
I tried the ADB code about a week ago, having found that direction in one of the threads. And yes, it gave me a 1, so good news.
Is there no other way to set unlock ability to 1? I mean, if Samsung had this phone in its lab, would they be able to force it to do things, or would they have to manually remove the MMC and put it on a special reader?
Also, the reason I created my own thread was that I thought piggybacking on other people's threads was frowned upon.
Edit: I also checked the article. I've seen it before, because when I want something, I keep searching for it until I either find it or destroy my nervous system trying. I tried putting together the combination firmware. But two problems. First, it lies about which files I'm going to find when I extract the various archives. boot.img.lz4: fine. system.img.lz4: no such file exists. sboot.bin.lz4: no such file exists. I'm guessing they would want me to use aboot.img.lz4 instead of sboot.img.lz4, and super.img.lz4 instead of system.img.lz4, but since the guide was made for phones that call their images different things, I don't honestly know. Second problem: Odin can't flash crap. Neither can Heimdall. The experts say, "Use one of these patched versions of Odin." So I try. No dice. And I try Heimdall, but that's no good either. Like I said, Error -12. What do I do about this? "Install stuff with Zadig." So I try that. I install every damn thing that Zadig has an option to install. Nothing changes. Nothing gets better. The tutorials have failed me.
Next time I buy a phone, painless rooting and unlocking is going to be my first criterion.
The option to unlock still has not appeared. I need more help.
I'm just about ready to give up on this phone completely. Can nobody save this situation?
are there any variants to this device? how would you match firmwares? or substitute the firmware to be able to flash, so that other options such as oem unlock become available? have we checked if any of the android 10 firmwares for a01 sm-s111dl have the oem option available?
FailSafeNow said:
UPDATE: This phone is money down the drain unless I can unlock and root it. If you can help me do that successfully, I'll pay you $20. Just to end this frustration.
UPDATE: Cash offer rescinded. I fixed the problem by buying a different phone and giving up on this one.
Question: How do I fix the OEM Unlocking option not appearing on a Samsung A01 (SM-S111DL)?
Answer: By giving up on it and buying a different phone.
Maybe this is a better forum to post this. I have a Samsung A01, SM-S111DL. I want to root. I want Magisk on there.
I have been searching, and searching, and searching for any useful tutorials on how to root this specific device. In addition to searching, I have also been searching. And besides that, completely apart from that, I have been searching. So nobody better tell me I haven't tried figuring this one out for myself.
So far, I can't find anything that works. I just can't. Partly because tutorials keep telling me I need to turn on the OEM Unlocking option, and it ain't there. I know where it's supposed to be, between Bluetooth HCI and Running Services, and it's not there. And I tried the Date & Time trick, and it didn't help.
So, if I can't turn that option on, what can I do? I was thinking about trying Heimdall. It was unable to print the PIT, but I managed to download a PIT that supposedly corresponds exactly to my device. It's labeled A01Q_USA_TFN.pit. I also downloaded the full firmware with Frija, and extracted stuff. I took the boot.img from the downloaded firmware and patched it with Magisk. I was thinking of installing it, but then I said, no, I better wait until some experts weigh in on this. Best case, the flash would go just fine. But then there are two bad cases. One, Heimdall won't even be able to flash, and that will mean more anger and frustration. Two, it'll brick the device. And I'm not even sure which is worse anymore.
This point, I don't even know what the hell to do. Please, someone help.
Also, I'd like to have TWRP on this device. But I don't know whether there's a version out yet. Sure, there's one for some other model of A01, but would it work with mine? I just don't know, and I'm feeling too discouraged to try.
Please, someone help.
Click to expand...
Click to collapse
ADB Fastboot OEM unlock? https://www.getdroidtips.com/how-to...-on-Samsung-Galaxy-Phones-via-PC-ADB-Fastboot
so i found out how to do this if anyone still needs this information for this phone. You go to software status and click the kernel version several times to activate developer mode and once thats activated there will be a developer options under "about phone" on the main settings menu and instead of being between bt hci and services it was down at the bottom under the debugging sub menu. There is USB debugging and wireless debugging(over wifi) simply toggle usb debugging and/or wireless debugging and continue from there on youre pc of choice with process of choice! Hope this has helped anyone. I have the exact same phone as OP, same model number.
ahsvanz
try
C:\ADB >fastboot devices
C:\ADB >fastboot OEM device-info
etc
replacing
C:\ADB with where ever you fastboot file is located
I too am having the same issue.
I recently wanted to try Android 12, I took a chinnese version of it and my phone is unusable, literally all chinnese.
I want to downgrade, I enabled Debugging and Oeam Unlock in Dev options but I get the ''remote: 'Flashing Unlock is not allowed"" when I try to fastboot oem unlock, I tried different USB ports, I keep updating all my drivers for ADB but nothing is working. I'm panicking a bit cause I don't have a phone to use, and not many people work with ONEPLUS in my country.
If someone has an answer, please save me lol
slimmynine said:
I too am having the same issue.
I recently wanted to try Android 12, I took a chinnese version of it and my phone is unusable, literally all chinnese.
I want to downgrade, I enabled Debugging and Oeam Unlock in Dev options but I get the ''remote: 'Flashing Unlock is not allowed"" when I try to fastboot oem unlock, I tried different USB ports, I keep updating all my drivers for ADB but nothing is working. I'm panicking a bit cause I don't have a phone to use, and not many people work with ONEPLUS in my country.
If someone has an answer, please save me lol
Click to expand...
Click to collapse
have you tried the code above ??
cant you just download the official original firmware and flash that ? im not familiar with the oneplus flashing techniques, ive always had samsungs except for the htc evo 3d back in the day
I tried them all, nothing seems to work
I'm stuck at 'Flashing unlock is not allowed'. I've set up everything I need to in Developer Options, I made sure they're all enabled.
It's really weird, could it potentially be a software issue? The software itself will not allow me to unlock OEM even though the check is turned on?
slimmynine said:
I tried them all, nothing seems to work
I'm stuck at 'Flashing unlock is not allowed'. I've set up everything I need to in Developer Options, I made sure they're all enabled.
It's really weird, could it potentially be a software issue? The software itself will not allow me to unlock OEM even though the check is turned on?
Click to expand...
Click to collapse
how does the one plus flash firmware ? for samsung we use a tool called odin, do you not have a similar tool for your device ?
I don't recall having any toolkit like that, but in order for the toolkit to work.. do you need to have an unlocked bootloader?
Cause the main issue is that I can't unlock it.
i dont think so, if your flashing an official firmware, but for your device i cant be sure of that
?
did you try running your commands as an su , is your device rooted ? you could try sideloading an update.zip maybe
what does it say when you flash this command ? true, true false ?
C:\ADB>fastboot OEM device-info
maybe this will help https://forum.xda-developers.com/t/...us-2-back-to-stock-100.3269543/#post-64279667
slimmynine said:
I too am having the same issue.
I recently wanted to try Android 12, I took a chinnese version of it and my phone is unusable, literally all chinnese.
I want to downgrade, I enabled Debugging and Oeam Unlock in Dev options but I get the ''remote: 'Flashing Unlock is not allowed"" when I try to fastboot oem unlock, I tried different USB ports, I keep updating all my drivers for ADB but nothing is working. I'm panicking a bit cause I don't have a phone to use, and not many people work with ONEPLUS in my country.
If someone has an answer, please save me lol
Click to expand...
Click to collapse
yeah i think some phone makers lock down the bootloader, like its unlocked but when i try to flash a gsi it says device locked state
jamsandpeabug said:
alcatel has a program to download and install firmware but the device is not listed, cannot find fw on the net
Click to expand...
Click to collapse
OK try
c:\adb
Adb fastboot oem device-info
Replacing
C:\adb
With where ever your fastboot is located
Just to check if your device is showing is oem locked or unlocked, it will display with a true or false option. I can't really advise to much as I don't have experience with that device
You could also try
fastboot oem unlock_critical
Not sure if that will work for your device though
Idk what else to recommend, are you stuck at boot ? Can u boot into recovery mode ? Do u have an ext sd card slot
OT-6025D | GSMSERVERPRO
gsmserverpro.com
Is that your firmware
Alcatel 1s Flash File Download [Stock ROM or Firmware
You can Download latest flash file and flash tools for Alcatel 1s phone here. Original stock ROM or Firmware available for free.
mobilereset99.com
Have youlooked at that
if you can confirm your phone has a mtk chipset use mtkclient to bootloader unlock it https://github.com/bkerler/mtkclient
otherwise youre out of luck
But
jamsandpeabug said:
im not stuck at boot, i want to flash gsi but it says device is in locked state even with oem unlocked in dev options, adb debugging enabled etc , and just wont let me flash.. its starts flashing and then fails due to locked state
Click to expand...
Click to collapse
If the flashing starts, and fails, the os would be overwritten and you wouldn't be able to boot. So what you mean is the process trys to start but fails, right yh then I don't know what else I can say to try and help, let's hope mtkclient is an avenue you can pursue
MOD ACTION:
Thread closed since OP has no content.