The goal here is both is to play with features which could be later be backported to official kernels, but also ones that probably shouldn't (like fast charging).
I'm basing my work on some existing kernels, but putting a little tuning here and there and making available via anykernel (3, currently) zippable installers. Currently there's only one maintaned branch, for LineageOS 17.1 and derivatives (success reports comes from LoS 15.1 to Non-LOS based roms, YMMV).
Contributors and testers are always welcome.
Due credit to karthik km for his miracledroid kernel and nicknitewolf for his kernel, rom and all his contributions in having our wt88047 devices up-to-date.
XDA:DevDB Information
PolesApart Kernel, Kernel for the Xiaomi Redmi 2
Contributors
PolesApart
Source Code for current branch: https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-17.1
Downloads: https://github.com/polesapart/android_kernel_wingtech_msm8916/releases
Kernel Special Features: Anykernel 3 Installers; DT2W; KCAL; LiveDisplay; Fast Charging; Wireguard.
Version Information
Status:Gamma (17.1 branch)
Created 2018-07-23
Last Updated 2020-06-01
Reserved
For Changelog, See the github's releases page.
Reserved
Thanks
can i install this kernal on aosp based roms or only for lineage based?
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Dan_nomad said:
can i install this kernal on aosp based roms or only for lineage based?
Click to expand...
Click to collapse
You'd have to try. If it doesn't work, then you need to flash the rom again or extract the boot.img from the rom's zip and apply via fastboot.
didhiy said:
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Click to expand...
Click to collapse
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
didhiy said:
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
Click to expand...
Click to collapse
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
PolesApart said:
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
Click to expand...
Click to collapse
Yaay... I didn't see that branch LOL thanks for your explanation :good:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
PolesApart said:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
Click to expand...
Click to collapse
Ohhh nooo,headphone is not with this kernal:crying:
Rbqttp said:
Ohhh nooo,headphone is not with this kernal:crying:
Click to expand...
Click to collapse
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
PolesApart said:
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
Click to expand...
Click to collapse
Headphone jack works normally... I like the features in this build, thanks for bring up a custom kernel for us :highfive:
Do you plan to include Wireguard in the kernel?
https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
*update* Wireguard module is available in the kernel available here https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
@PolesApart an aroma based installer will be nice , i knw its too early, but jst a suggestion. Keep up the gud work bro.:good:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Vikhyat01 said:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Click to expand...
Click to collapse
Yes , you can.:good:
Will it work on RR oreo
Related
CyanogenMod 12.1 unofficial daily builds
CyanogenMod is a free, community built, aftermarket firmware distribution of Android
REMEMBER:
That for CM Team this is still a work in progress, and CM Team does not offer support to any kang build. If one day will not appear it means that source was not buildable. On early builds some things might be, and possibly will be broken - you should not have any expectations, for now we can just watch the process of rebasing into new mr1 code. I will also try to fix some things while testing
CHANGELOG:
All the source code for CyanogenMod is available in the CyanogenMod Github repo or visit out Gerrit Code Review for a up to date changelog.
DOWNLOADS:
CM12.1-hammerhead
INSTRUCTIONS:
- latest TWRP is higly recomended
- DO NOT WIPE YOUR INTERNAL STORAGE
- factory reset
- flash build
- flash gapps
- Enjoy!
Recommended GAPPs?
BlackVoid said:
Recommended GAPPs?
Click to expand...
Click to collapse
any 5.1 ones
Does this mean calls work everything wifi and play store without gapps?
If means that it's not a daily driver in any way and for now, there are many changes being pushed all the time. However all hardware is working fine
Downloading first cm 12.1, thanks for your job.
should wait for Official, but thanks for sharing.
turydios said:
Downloading first cm 12.1, thanks for your job.
Click to expand...
Click to collapse
Please keep us posted on how it is on 5.1. Can hardly wait for the issues to get sorted out and nightly builds to come out!!
mikegapinski said:
If means that it's not a daily driver in any way and for now you can't make a single call. Will be fixed in a few days, there are many changes being pushed all the time
Click to expand...
Click to collapse
lol, for me it works and the ROM is fairly stable, but it's likely because I'm using CAF source for my builds.
New cyanogen bootanimation includes?
So is are we able to make calls and send sms with this rom?
thanks
r1c4rd0 said:
So is are we able to make calls and send sms with this rom?
thanks
Click to expand...
Click to collapse
There's a post on the 1st page, and theres only 2 pages in this thread...
In short, no.
mikegapinski said:
If means that it's not a daily driver in any way and for now you can't make a single call. Will be fixed in a few days, there are many changes being pushed all the time
Click to expand...
Click to collapse
Koragg618 said:
There's a post on the 1st page, and theres only 2 pages in this thread...
In short, no.
Click to expand...
Click to collapse
New build is on buildbox now, expected to roll out in a few hours after test
I've found a issue with RIL, CM is basing on CAF telephony - they have not updated the ril api to 11 like AOSP did - all it means that all other CM 12.1 builds base on 5.0.2 blobs not the 5.1 ones like I did. Merged new stuff from AOSP mr1 into cm12.1 staging branch, all should get back in place now
And calls work wifi and sms? Almost daily driver?
cell2011 said:
And calls work wifi and sms? Almost daily driver?
Click to expand...
Click to collapse
It should be all working in current build with 5.1 libs from AOSP, meantime CM will need to rebase telephony on their own.
Will update with progress anytime now
Today's build is up on server - all is working like it should(telephony is fixed with AOSP 5.1 libs).
Happy flashing
Im stuck at just a sec screen is gapps included or needed and which ones? All is good just rebooted phone and flashed minimal gapps 5.1
mikegapinski said:
Today's build is up on server - all is working like it should(telephony is fixed with AOSP 5.1 libs).
Happy flashing
Click to expand...
Click to collapse
The network works
Whats a good kernel for this?
Custom SlimSaber ROMs and mods
First and foremost we would like to send out a huge
THANK YOU to @fusionjack for providing the great SlimSaber source
Because more and more users started to enjoy building their own custom SlimSaber versions and SlimSaber compatible kernels, it was time to start a separate thread.
In this thread users/developers can publish their custom builds and we can discuss them while keeping the official SlimSaber thread clean.
I would like to ask all to keep discussions about any custom build here in this thread and only discuss the official build in the official SlimSaber thread.
This version of Xposed is reported to be working with SlimSaber credit to @patrickph
SlimSaber CAF Build with Sultanxda's trees
YoshiShaPow said:
Downloads
What's the difference? Check out this thread
Kernel Source
My builds are based on the SlimSaber source with some caf dependencies used instead to make it compatible.
This version includes Snapdragon Camera as well as Viper4Android.
Dirty flashing from a different version of SlimSaber is not recommended because it has many changes. You've been warned.
Click to expand...
Click to collapse
Boeffla Kernel - Slim Version
This is a moded version of the Boeffla Kernel with a changed Ramdisk to make it bootable in Slimsaber and built with Uber 5.2.1 toolchain.
Latest Version: 4.2 beta 10
Link: AndroidFileHost
Source: Github
Click to expand...
Click to collapse
XDA:DevDB Information
Custom SlimSaber builds and mods, ROM for the OnePlus One
Contributors
kantjer, Mrwargod, kwoktopus, fusionjack
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest CyanogenMod Firmware
Based On: SlimSaber
Version Information
Status: Nightly
Created 2015-08-10
Last Updated 2016-08-17
Daily SlimSaber builds
You can find my Daily builds (or whenever I think a new build is relevant) here:
Rom builds
changelog
My builds are based on the stock SlimSaber source. I build more frequently than the official SlimSaber release. Also I might add new features to test before they are included in the official build.
The kernel included is the unmodified SlimSaber stock kernel.
Difference compared to stock SlimSaber build:
Removed AudioFX and replaced it with Viper4Android build from source
You can dirty flash my build over the official build and visa versa.
Sources:
My Github
SlimSaber Github
Reserved
Interesting links:
Building SlimSaber HowTo
Congrats! Happy modding!!!
Great work, congratulation!!!
Sorry for the ignorant question but what is the difference between this ROM and @fusionjack ROMs ?
Thanks
And would it be possible to add the buttons as in the pic, in WiFi, data , etc ?
kantjer said:
You can find my Nightly (or whenever I think a new build is relevant) builds here:
Rom builds
changelog
Click to expand...
Click to collapse
Thanks for
Code:
Project name: kernel_oneplus_msm8974
*kantjer - add Smartmax EPS (extreme power saving) CPU Governor
congratulation :good:
gugas123 said:
Sorry for the ignorant question but what is the difference between this ROM and @fusionjack ROMs ?
Thanks
Click to expand...
Click to collapse
Check post #2
Sent from my OnePlus One
kantjer said:
Check post #2
Sent from my OnePlus One
Click to expand...
Click to collapse
Winged_Panther said:
Thanks for
Code:
Project name: kernel_oneplus_msm8974
*kantjer - add Smartmax EPS (extreme power saving) CPU Governor
Click to expand...
Click to collapse
Downloading
kantjer said:
You can find my Daily builds (or whenever I think a new build is relevant) here:
Rom builds
changelog
My builds are based on the stock SlimSaber source. I build more frequently than the official SlimSaber release. Also I might add new features to test before they are included in the official build.
You can dirty flash my build over the official build and visa versa.
Click to expand...
Click to collapse
Great, only thing is to get YoshiShaPow and MrWarGod to post their stuff here
Oh, and I think you can put your github sources I think they are missing
Poesini said:
Great, only thing is to get YoshiShaPow and MrWarGod to post their stuff here
Oh, and I think you can put your github sources I think they are missing
Click to expand...
Click to collapse
I will, i will. :good:
Just like the collective, could this be titled for "all" Slim mods?. Love that this will be a device specific version, as I get lost searching in the multi device thread..
Sent from my Oneplus One using XDA Premium 4 mobile app
great job, congratulations :Buona: : D
Mrwargod said:
I will, i will. :good:
Click to expand...
Click to collapse
Beta 17 source is released so you will have to
kantjer said:
Beta 17 source is released so you will have to
Click to expand...
Click to collapse
I'm still dependent on ZZ's uber sources, but as soon as they're out (hopefully today) it will make it's debut here.
Mrwargod said:
I'm still dependent on ZZ's uber sources, but as soon as they're out (hopefully today) it will make it's debut here.
Click to expand...
Click to collapse
I used ZZ's Uber source as base but now cherry-pick the new commits from Lord B. on top of them.
Using SmartGit it's a 30 seconds job.
https://github.com/kantjer/boeffla-kernel-cm-bacon/commits/boeffla_v4_cm_u600
kantjer said:
I used ZZ's Uber source as base but now cherry-pick the new commits from Lord B. on top of them.
Using SmartGit it's a 30 seconds job.
https://github.com/kantjer/boeffla-kernel-cm-bacon/commits/boeffla_v4_cm_u600
Click to expand...
Click to collapse
Smartgit? That must be what i've been looking for.
Thanks for the tip.
I'll have a go at it when i get home. :good:
@ kantjer
I am not sure the reason for building a ROM on Slimsaber. I would rather request you to consider building a ROM on Official SLIMP. SLIMSaber itself is a UNOFFICIAL build of SLIMP (If I am not wrong).
That will give you an identity and we all user will definitely enjoy and like to see something new from you.
Please ignore if it hurts u. My intention not to hurt u. I like to see something new.
Hi everyone,
The reason why i created this thread is just to share what I compiled for my personal use fulfilling what i expect from my device Oneplus X. Recently someone asked me for the roms which are best compatible with my Arsenic Kernel, so here they are. These are the Unofficial builds of some of the renowned roms like DU and Tesla.
Since i didnt want to make seprate threads while keeping it newbie friendly i decided to make just one short thread listing all the changes i made in them apart from rom specific.
Please keep in mind that m not an official maintainer so dont expect me to release new updates regularly like official ones as i compiled them for personal use.
Features and Bug Fixes that you can expect in my builds (other than rom specific) are:
Faster GPS.
Less heating even while charging.
Better compatibility with Arsenic Kernel as default.
No new Qualcomm location stack and CNE service (they are known to be a cause of battery drain and heating issues)
No Audio/Mic issues.
Fixed Network Mode changing issue in DU.
No speed drops while i/o operations in sd card (AICP & DU only)
Updated Media Codecs (AICP & DU only)
These ROMs have Arsenic as prebuilt kernel, but if you want to shift to anyother kernel then feel free to flash any, they will work without any issue.
This thread currently supports Tesla, DU and AICP compiled by me which can be found in the below download links..
As far as rom related bugs are concerned, you should report them TO HERE ONLY..! NOT in the community as i havent posted the links in community so its better you should report them here only, m here to fix them for my unofficial builds.
I wont be updating the thread with every New Release of the builds, find them in given folder and flash them of you want to, i wont spoonfeed.
Both DU and Tesla Team has dropped support for their marshmallow builds so consider them EOL (End of Line).
Download Links:
Tesla : https://www.androidfilehost.com/?w=files&flid=115104
LINK FOR DU & AICP CONTAINS BOTH BUILDS, ONE COMPATIBLE WITH OLD BOOTLOADER AND ONE WITH NEW BOOTLOADER SO FLASH RIGHT ONE WITH YOUR EYES OPENED!!!
DU : https://www.androidfilehost.com/?w=files&flid=116911
AICP : https://www.androidfilehost.com/?w=files&flid=120663
Recommended Gapps: Banks Gapps
Follow THIS GUIDE to Upgrade Bootloader to receive Future Updates
Bugs: Report if you find any.
Credits:
* @martinusbe and his whole GZR team for tesla
* Team DU
Device Sources:
Device Tree
Kernel Source (Arsenic)
XDA:DevDB Information
[ROMs][UNOFFICIAL][6.0.1] Tesla | Dirty Unicorns | AICP, ROM for the OnePlus X
Contributors
CheckYourScreen
Source Code: https://github.com/CheckYourScreen/Arsenic.Kernel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2016-09-22
Last Updated 2017-05-07
Reserved
Reserved
I'm fan of your kernel. That rock. So which rom you recommend for good battery life with heavy usage?
Downloading both..
Fataldose said:
I'm fan of your kernel. That rock. So which rom you recommend for good battery life with heavy usage?
Downloading both..
Click to expand...
Click to collapse
Both are good, Tesla has OMS (substratum) and DU has CM theme engine. Use whatever you like
Thank you man, you're really great. I'm using your awesome kernel since the first days with DU. To have them both optimized in one ROM is really fantastic. Will try it asap.
Wow, one of my favorite ROM (Tesla) now comes with prebuilt Arsenic Kernel. This is definitely a great ROM to use.
Thank you!
You are great. Thanks:good:
Kya baat hai nimit @CheckYourScreen ... Vatsal left behind !
Edited!!!
rockuppl said:
Kya baat hai @nimit ... Vatsal left behind !
Click to expand...
Click to collapse
No comparison/competition with others plz
And you tagged someone else lol
Nice mate i eill flash it
subscribed [emoji3]
Sent from my turbo_onyx using XDA-Developers mobile app
Guess I'll give AOSP base another shot.
tet-bundy said:
Guess I'll give AOSP base another shot.
Click to expand...
Click to collapse
Both are AOSP based
tet-bundy said:
Guess I'll give AOSP base another shot.
Click to expand...
Click to collapse
I have always found AOSP roms to have better performance compared to cm13 (i know this is subjective though)
thanks @CheckYourScreen i guess i will have to check out dirty unicorns=p
Still cant change network type with DU. I like that rom but its annoying :/
Fataldose said:
Still cant change network type with DU. I like that rom but its annoying :/
Click to expand...
Click to collapse
Strange :/
Can you pm me a log?
Its working for @Joshwin Aranha lol
EDIT: https://drive.google.com/file/d/0B4K5cvm1zdldSEFtYk9ZQS1WYlE/view?usp=drivesdk
toggle is working but network isnt changing. Got logs, can be fixed,source needs to be patched. my exams are going on so next build will have it fixed ( after 26th. Sept. )
Hi,
I had a question. How are these builds different than others?
If a user wants a custom kernel, he can flash yours.
So if I am not wrong the only change I observe is
- They are built with your kernel.
Can you please tell us ROM specific changes or push them somewhere?
Thank you.
rockuppl said:
Kya baat hai nimit @CheckYourScreen ... Vatsal left behind !
Edited!!!
Click to expand...
Click to collapse
Lol.
Nice race though.
Vatsal said:
Hi,
I had a question. How are these builds different than others?
If a user wants a custom kernel, he can flash yours.
So if I am not wrong the only change I observe is
- They are built with your kernel.
Can you please tell us ROM specific changes or push them somewhere?
Thank you.
Click to expand...
Click to collapse
Sir, I should work on a kernel too i guess, Some cp's and I'll get a new thread too... Yay!!
This is CyanogenMod, recompiled from Seraph08 sources with (also selfcompiled) Uber Toolchain 4.9. If there are Bugs, they should be identical to Seraph08 version. If there are additional Bugs only to be found in this ROM, please let me know.
One thing though: I'm not a developer. I just recompiled the ROM. So if someone finds a bug and has an idea how to fix it, please tell me.
Sources:
Please see thread of Seraph08, to be found here: http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436/
Download:
https://www.androidfilehost.com/?w=files&flid=132037
Opengapps:
http://opengapps.org
SuperSU: https://download.chainfire.eu/supersu (will redirect you to the latest version)
XDA:DevDB Information
CyanogenMod 14.1, ROM for the OnePlus 2
Contributors
dansou901, Seraph08, Grarak, Mahdi768
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Beta Release Date: 2016-12-16
Created 2016-11-27
Last Updated 2016-12-16
For updates, dirty flash (if you are coming from a previous version of exactly this ROM) should be fine, but format system and cache before you flash. First boot will take 5-10 minutes, depending on how many apps you have installed (more apps = longer first boot).
If there is no changelog for a new build, have a look at https://www.cmxlog.com/14.1/oneplus2/ and https://github.com/Seraph08/device_oneplus_oneplus2/commits/cm-14.1.
12.12.2016:
- alert slider is fixed (was broken in build of 6th December)
- updated to Android 7.1.1
05.12.2016:
- SELinux back to permissive
01.12.2016:
- SELinux is enforcing now (V4A users beware)
- Latest version of SuperSU won't break sensors anymore
Some specs of rom would be great
22vlaja said:
Some specs of rom would be great
Click to expand...
Click to collapse
What do you want to know?
New build is up!
dansou901 said:
New build is up!
Click to expand...
Click to collapse
Change log??
Wilguens Joachin said:
Change log??
Click to expand...
Click to collapse
Have a look at Seraphs thread, but SELinux is permissive again (he explains there why). If you want a full changelog of CM, look at https://www.cmxlog.com/14.1/.
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
dansou901 said:
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
Click to expand...
Click to collapse
Damn, I just flashed it too lol
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
knpk13 said:
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
Click to expand...
Click to collapse
Thanks for trying out, does everything work for you? I did a clean flash myself, so I can't tell.
What are the advantages of these builds over the official ones? Only UberTC?
Claudiosvs said:
What are the advantages of these builds over the official ones? Only UberTC?
Click to expand...
Click to collapse
It's the sources by Seraph08 and UberTC.
New build is there, thanks @Seraph08 again for the help!
dansou901 said:
New build is there, thanks @Seraph08 again for the help!
Click to expand...
Click to collapse
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
bani1994 said:
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
Click to expand...
Click to collapse
Done, thanks for the hint
New build is up!
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
aroblu94 said:
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
Click to expand...
Click to collapse
It boosts up the performance a bit and it's smoother.
dansou901 said:
It boosts up the performance a bit and it's smoother.
Click to expand...
Click to collapse
Well, so why someone still uses another compiler?
Thanks for the answer
After compiling roms for a couple devices and learning about the android rom, i have decided to dabble in the arts
of kernel compiling, i started with my main device the Nexus 6p, learnt a fair bit compiling kernels for it, so i decided to
come back to this device for testing purposes and trying to test and go back to ARM device which is completely different.
Now with the Nexus device i went full updated linux kernel first then gave updates, but this time ill be doing something a little
different, i will upstream some kernel updates, plus caf updates then i will give a release, or for example, the first realease i will
give you guys will be 3.4.2 kernel version, just to get things going, then next release will be a higher version.
I hope all of you like it i will be adding alot of stuff in the coming months.
All releases will keep up to date and working with latest CM roms
Here is the download link just click on the kernel and it will download
XDA:DevDB Information
WinXkernel, Kernel for the LG G3
Contributors
winxuser
Source Code: [url]https://github.com/winxdroid/android_kernel_lge_g3[/URL]
Kernel Special Features:
Version Information
Status: Testing
Created 2017-02-08
Last Updated 2017-02-15
CHANGELOG
15/02/17
updated to 3.4.15
added adreno idler
added new powersuspend
added power efficient workqueue
added voltage control
added kcal
08/02/17
Latest LineageOS kernel update
Updated to 3.4.2
it is compatible to stock rom or fulmics rom?
No it's not, this is for lineageos nougat roms
Could you please give us more info about this kernel? Thanks in advance.
Ducatuca said:
Could you please give us more info about this kernel? Thanks in advance.
Click to expand...
Click to collapse
Well at the moment it's stock lineage kernel,, I am currently upstream IMG the current 3.4.x updates, and it will also have alot of improvements
really good to see another dev on g3 , thanks for effords ! i will try as soon as possible.
Can you inform me about the kernel versions i dont quite understand what the differences are
Thanks
lintol23 said:
Can you inform me about the kernel versions i dont quite understand what the differences are
Thanks
Click to expand...
Click to collapse
Ok so stock stock kernel you get with stock rom or even custom like CyanogenMod/lineageos has a kernel version of 3.4, each incremental update after that eg 3.4.1 or even 3.4.100 has many fixes and updates within the kernel, some do nothing for our device but others can, a small code change in one file can impact the way the kernel works
karasumert98 said:
really good to see another dev on g3 , thanks for effords ! i will try as soon as possible.
Click to expand...
Click to collapse
No worries I have had this device for many years tried, got a new device and just forgot about it lol, like I said I had been working on the Nexus 6p that I have and decided to try out with this one
This kernel reboots after a short period on rr5.8...
kehne said:
This kernel reboots after a short period on rr5.8...
Click to expand...
Click to collapse
I dont know good.. But rr is lineage? This kernel is for lineage if i good understand
Sealant said:
I dont know good.. But rr is lineage? This kernel is for lineage if i good understand
Click to expand...
Click to collapse
Yep, RR based on linage. So basically it should work, but after 10-30sec the ROM reboots
I can't wait for up to 3.4.113
What devices does this kernel support? I have the vs985
Does this work on all lg g3 variants ?. Because I dont want to flash this and brick my lg g3 d852. Thanks
MaddMaxx636 said:
What devices does this kernel support? I have the vs985
Click to expand...
Click to collapse
TeamAndroid14 said:
Does this work on all lg g3 variants ?. Because I dont want to flash this and brick my lg g3 d852. Thanks
Click to expand...
Click to collapse
This kernel only supports d855 as it is the device I have
kehne said:
This kernel reboots after a short period on rr5.8...
Click to expand...
Click to collapse
Well I'm running latest lineageos and I have never had it reboot on me. Are you using any kernel manager apps at all, as I haven't been able to add and customisation to it just it. It may panic because it's reaching for something it doesn't have
No reboots here either,
Im running the latest official Lineage .
if u have kernel mod or any other kernel tuner installed try to go back to your basic settings or just delete the app and install it again after your first boot.
Really smooth kernel !
Hi... Can you had the savoca Patch to use with Wheatstone.apk? Can use my phone without it
Enviado do meu LG-D855 através de Tapatalk