Updated- changed the title to be more generic for device rather than just an update/build.
Hi folks,
As title says, this full firmware is available now on FF so you can just dload for update or can use in case phone is soft bricked. This is the first full firmware available for Indian variant on FF.(b151 system img was shared long back).
Note- OTA has already started rolling out a week back and many has received the same. OTAs are coming in batches and should reach everyone by 3rd August as per info i have.
shashank1320 said:
Hi folks,
As title says, this full firmware is available now on FF so you can just dload for update or can use in case phone is soft bricked. This is the first full firmware available for Indian variant on FF.(b151 system img was shared long back).
Note- OTA has already started rolling out a week back and many has received the same. OTAs are coming in batches and should reach everyone by 3rd August as per info i have.
Click to expand...
Click to collapse
I have tried the full ota but it's not Woking?
1) I habe downloaded all thee folders.
2) creates dload folder in my memory card.
3) unzip update.zip and extracted update.app and pastes in dload folder.
4) switch off the phone and started with vol+ - vol- - power.
Update start but it failed on 5 percent.
Also i found weired issue in my rom that I don't have update option only in settings
Rj_Param said:
I have tried the full ota but it's not Woking?
1) I habe downloaded all thee folders.
2) creates dload folder in my memory card.
3) unzip update.zip and extracted update.app and pastes in dload folder.
4) switch off the phone and started with vol+ - vol- - power.
Update start but it failed on 5 percent.
Also i found weired issue in my rom that I don't have update option only in settings
Click to expand...
Click to collapse
You need to flash the 2nd file for getring back the update option.
Haven't you gor the ota yet?
im getting error while downloading via android app and strangely the the update for this phone is not being shown on pc version of the app
aditya desai said:
im getting error while downloading via android app and strangely the the update for this phone is not being shown on pc version of the app
Click to expand...
Click to collapse
You may wait for couple of days as rollout shoukd complete for all users by 3rd August. I got on my debrnaded phone.
shashank1320 said:
You need to flash the 2nd file for getring back the update option.
Haven't you got the OTA yet?
Click to expand...
Click to collapse
2nd file????
1) Update_data_full_public.zip
2) update.zip
3) update_Full_BKL_L09I_hw_in.zip
So can you guide me which file I should flash to get update option?
I have tried update.app from a update.zip file but that's not working.
---------- Post added at 07:12 PM ---------- Previous post was at 06:48 PM ----------
Rj_Param said:
2nd file????
1) Update_data_full_public.zip
2) update.zip
3) update_Full_BKL_L09I_hw_in.zip
So can you guide me which file I should flash to get update option?
I have tried update.app from a update.zip file but that's not working.
Click to expand...
Click to collapse
Thanks,
I have figured it out. I have taken second zip file from khera's rom and rename the file to update.app and it's upgraded and now I got OTA update for the new version.
Its better factory reset your phone if you are coming from custom rom.
After update i had so many bugs, but after reset everynrjg is smooth and fine.
Just got the b162 via OTA with August security patches.
shashank1320 said:
Just got the b162 via OTA with August security patches.
Click to expand...
Click to collapse
Please upload it to ff
mondalakash said:
Please upload it to ff
Click to expand...
Click to collapse
Try checking. I just randomly checked and it appeared. Can wait as no change apart from addressing CVE issue as announced in august 2018.
https://consumer.huawei.com/en/support/bulletin/2018/8/
shashank1320 said:
Try checking. I just randomly checked and it appeared. Can wait as no change apart from addressing CVE issue as announced in august 2018.
https://consumer.huawei.com/en/support/bulletin/2018/8/
Click to expand...
Click to collapse
Got the update the device is butter smooth right now after the update
Anyone get b168 yet on the c675?
Cpuburn said:
Anyone get b168 yet on the c675?
Click to expand...
Click to collapse
It's not available right now... It will available by end of the only.
Just read where b170 is available OTA for c675?
Anyone get it?
br54 said:
Just read where b170 is available OTA for c675?
Anyone get it?
Click to expand...
Click to collapse
I havent got it yet!! But in 1-2 days, i will get it.If you want to know more about it! Download honor club app and see there!! People are posting reviews there!!
Gpu turbo for Indian variant. Captured from honor club India.
What is in the Update??
1. Gpu Turbo
2. AIS Feature
3. User Agent Supported for airtel
4. Google security patch merge
5. Some Minor bugs improvements..
Forgot to capture it to ff
Got the update finally... Indian variant.
Finally update received for my rebranded phone!!
Just received normal OTA
Related
Hello,
I have a huge problem with meinm Honor 5X KIW - L21 .
I wanted to flash the OTA update B320 today .
Before I made it , I have the original recovery installed and the Honor unrooted .
After that I carried out the OTA update . This then broke off with an error .
Now I wanted the Honor boot , but it hangs while Honor logo .
I can not reboot into bootloader .
The only thing that is still possible , the boot into the recovery .
Can the phone still somehow save ?
bly2 said:
Hello,
I have a huge problem with meinm Honor 5X KIW - L21 .
I wanted to flash the OTA update B320 today .
Before I made it , I have the original recovery installed and the Honor unrooted .
After that I carried out the OTA update . This then broke off with an error .
Now I wanted the Honor boot , but it hangs while Honor logo .
I can not reboot into bootloader .
The only thing that is still possible , the boot into the recovery .
Can the phone still somehow save ?
Click to expand...
Click to collapse
There is no OTA marshmallow update for the KIW L21 yet
Think you might have flashed KII L21 update instead
Sent from my KIW-L21 using Tapatalk
No, the statement is false . I was offered this morning on the App HiSuite the OTA update .
Have you tried the pc program to do a recovery or maybe reply update thru the recovery .... Yes the KIW has the B320 update I'm using it right now ...
I do not have the files . And can download they nowhere . At least for the KIW - L21
bly2 said:
No, the statement is false . I was offered this morning on the App HiSuite the OTA update .
Click to expand...
Click to collapse
My mistake I've just seen the update now
Is it any better performance wise?
lharp1977 said:
Have you tried the pc program to do a recovery or maybe reply update thru the recovery .... Yes the KIW has the B320 update I'm using it right now ...
Click to expand...
Click to collapse
Sent from my KIW-L21 using Tapatalk
don't worry
- turn device off
- put USB-cable in your pc (with drivers and adb/fastboot installed)
- press vol-down and power simultan und plug in USB-cable in your phone within one second
- now you are in bootloader-mode
- flash TWRP and do anything you want (restore a backup, flash rom ...)
- I would advise to flash a rom from xda with TWRP instead of ota or update.app through stock-recovery (only problems!)
So far so good , pretty snappy , batt seems ok . Going on third day with this update . Ui changes in where stuff is located and finally batt percent inside the icon Yeah ... Had some trouble with swipe to unlock while charging butt could have just been the theme.... I use perf mode 90 percent the time I don't like the smart mode at all....
lharp1977 said:
So far so good , pretty snappy , batt seems ok . Going on third day with this update . Ui changes in where stuff is located and finally batt percent inside the icon Yeah ... Had some trouble with swipe to unlock while charging butt could have just been the theme.... I use perf mode 90 percent the time I don't like the smart mode at all....
Click to expand...
Click to collapse
Cool. Still waiting on my KII-L21 (GR5) Nigerian region. No update yet. I keep refreshing Updater everyday. Twice a day even. Nothing.
Plan is when it finds the update, i flash back my stock recovery and update normally. But already getting so impatient. Thinking of moving to CM soon.
Kiw L21 rolled out yesterday dont have the update yet it takes some time. De you have to be fully stock to receive the update? Did you upgrade from B130 or B140?
I'm full stock was B140 with unlocked boot. I tried some Roms but none have FW support afaik so I went back to stock no root. I found the update thru the updated Hicare app not the one already installed but the one the pc program installs....
You have to upgrade from within the HiCare app, select service, then OS Upgrade early adopters.
minty1978 said:
You have to upgrade from within the HiCare app, select service, then OS Upgrade early adopters.
Click to expand...
Click to collapse
Noob question: So this means the update is not "officially" out, but rather some kind of public beta where you can enlist for?
GeForce66 said:
Noob question: So this means the update is not "officially" out, but rather some kind of public beta where you can enlist for?
Click to expand...
Click to collapse
It is the official update. From what I understand, the update normally rolls out in stages. You simply 'jump the queue' by downloading it through the early adopters option..
Hi,
Does anybody knows, in which drive or folder the firmware files gets downloaded? I updated from B150 to B180 via Firmware Finder (proxy method), so I was able to download the update files over the normal Firmware Update function in the settings. Sadly, I klicked the Update-button in Firmware Finder several times and so, the download of the update files got started several times.
Now the firmware description page in the settings shows a size of 5 GB for the last update (B180). And on the memory page in settings, there are more than 12 GB occupied drive space from firmware files listed. Other file management tools like Files Go from Google show the same amount of occupied/free space on the internal drive (not SD card). So, the files must be on the phone somewhere. But...
I used several tools to search for the downloaded files. I didn't found them. Not I in a directory on the internal drive, not I in a directory of the system partition (read-only). I also cleared the /cache partition via recovery menu: press Vol-Up and On/Off-Button to switch on the phone and clear Cache.
Has anyone an idea, where the firmware update files have been be downloaded and/or how I can clean up "old" firmware files?
Thx.
The firmware is saved in /data/media/0/HwOUC/[Some number]. /data/media/0 is the internal storage.
Hey,
I have Honor 9 version STF-L09C432B100, I have looked on the forum, and can see you can get Oreo updates since 5th / 11th Dec.
I saw you can get updated firmware from Firmware finder, I saw the latest 180 build, however checking this with imei, shows that is is not ready for my device.
2 questions
1. is it safe to get firmware like this?
2. Am I seeing this due to buying from Three (uk)?
th34monk3ys said:
Hey,
I have Honor 9 version STF-L09C432B100, I have looked on the forum, and can see you can get Oreo updates since 5th / 11th Dec.
I saw you can get updated firmware from Firmware finder, I saw the latest 180 build, however checking this with imei, shows that is is not ready for my device.
2 questions
1. is it safe to get firmware like this?
2. Am I seeing this due to buying from Three (uk)?
Click to expand...
Click to collapse
If its saying firmware not approved you should not flash it..
You have european variant??
You will get ota of b130.. Then b150 and then b180..
Give it a time you will recieve it..
hassanjavaid8181 said:
If its saying firmware not approved you should not flash it..
You have european variant??
You will get ota of b130.. Then b150 and then b180..
Give it a time you will recieve it..
Click to expand...
Click to collapse
How long though? There does seem to be quite a few updates and I have had the phone a few months now
Yes I'm in uk
th34monk3ys said:
How long though? There does seem to be quite a few updates and I have had the phone a few months now
Yes I'm in uk
Click to expand...
Click to collapse
There is no ETA... You can get is early or it will take time to reach...
hassanjavaid8181 said:
There is no ETA... You can get is early or it will take time to reach...
Click to expand...
Click to collapse
how do you get it early?
th34monk3ys said:
how do you get it early?
Click to expand...
Click to collapse
Its not upto you.. There is nothing you can do to get is early..
I upgraded to oreo via firmware Finder, there is an a available update there
YOU CAN FIND THE FULL G930AUCU8CSA3 FIRMWARE HERE:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871
G930AUCU4CRE4 to G930AUCS4CRG5:
Download link: https://drive.google.com/file/d/1MoJ0be2exLMoji2ZURR6tbEiHCqWSszG/view
G930AUCS4CRG5 to G930AUCU4CRI2:
Download link: https://drive.google.com/file/d/1Fdrcy4m49Qtl-__dUE0Etuqmyn8UhYbe/view
G930AUCU4CRI2 to G930AUCS8CRJ2
Download link: https://drive.google.com/file/d/1bhVx5Rt_CTXmG5YQrY5azS10RO3lWj1r/view
G930AUCS8CRJ2 to G930AUCS8CRK1
Download link: https://drive.google.com/file/d/1lepPXVZIiZM4i_VMOUOvDvVHvGY4ifwv/view
G930AUCS8CRK1 to G930AUCS8CRL1
Download link: https://drive.google.com/file/d/1CUJOVWnDsk3LL378vxLO0vp8y3AdQjmr/view
If i helped you don't forget to hit thanks button
G930aucu4cri2
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Juliowwwe said:
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Click to expand...
Click to collapse
Link is UP
thank you very much
thank you very much
New October update is UP
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
lahlah said:
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
Click to expand...
Click to collapse
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
http://dl.adbdriver.com/upload/adbdriver.zip
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
samhnky said:
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
Click to expand...
Click to collapse
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
stek-kravari said:
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
Click to expand...
Click to collapse
Awesome! Thank you, thank you!
I actually really like Oreo, just trying to get Oreo and WiFi calling working on my phone (My Office at work fights all day for 1 bar of cell signal), I had hoped that WiFi calling worked in the SM-G930U variant since everyone talked about it running so much better, but alas, it still doesn't support WiFi Calling (Stupid me for thinking it might have had support added recently).
Thank you again
(My Wife is sure to get upset with me once again working on my phone again today... whoops)
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
bnn0 said:
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
Click to expand...
Click to collapse
You mean about G930AUCS8CRJ2 sideload with adb? Im just pulling the update from AT&T servers and uploading it here. I don't know how to make sideload zip. And for the rooting part I don't know if its possible now because the bootloader binary was updated to 8, try to search here on xda and see if you can find root methods for this firmware
new update, check first post
----
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Maury Yarik said:
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Click to expand...
Click to collapse
First you need to install this:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871 (G930AUCS8CRJ2)
Then you need to go from G930AUCS8CRJ2 to G930AUCS8CRK1, G930AUCS8CRK1 to G930AUCS8CRL1 and you will have the latest update.
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Josh13400 said:
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Click to expand...
Click to collapse
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
stek-kravari said:
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
Click to expand...
Click to collapse
I was thinking something like that was possible. I have baseband version G930AUCU4CRB5 Android 8.0.0 on the AT&T Gal S7 as mentioned, I never saw any updates from this version to go up to a newer version or get into regular updates from OTA. 2 issues I would like to also fixed, that came with the manual update to 8.0 oreo on my phone was the HR heart rate sensor on the back by your flash(red LED) always goes off.. And have tried to go to Samsung health and do some settings to turn it off, but seems to show back up eventually. Also, the issue of not having a working LED indicator, works fine when the phone is POWERED off. and charges. But in OS, it won't work, screen off or on bc of the update. If anyone knows how those issues could be fixed and if there is a possible newer update from my baseband mentioned below. And thanks for the response.
HI, Help needed
Hi,
I wanted to check if it is possible to flash the latest Oreo firmware you have here for downloading dirrectly to my samsung s7 that is currently running on 7.0? Current BaseBand is G930AUCU4BQK2
Basically what happened was that i lost all my contacts on my phone, I ended up download Dr.Phone to my laptop, which i used to try and recover my numbers. What i didnt know was that dr.phone rooted my device which has caused me nothing but headaches.
I now want to flash my phone and get updated to oreo and have my phone working normally again. Since dr.phone did whatever it did to my phone I lost use of my finger print scanner, had to disable samsung health as it kept trying to open on its own, my phone is lagging and freezing constantly..
I just want my phone to be normal again and unrooted and updated.
Lastly my phone is an AT&T device, that i bought second hand in Dubai, if i flash stock firmware is it going to carrier lock my device to AT&T again?
Any advice and help with this matter would be greatly appreciated.
Hi everybody, I'm a new p20 lite user and I want to ask you: do you know how to install a original firmware? I've tried to follow the dload method (so I put the update.app file into the dload directory that it's located in the external sd card) but the installation process stops at 5%. I found the update.zip file using firmware finder, the firmware I want to install it's avaiable for me (I checked the imei) and I tried with ota and full ota. Maybe I have to unlock the bootloader or root my device before? If someone need my actual build is ANE-LX1 8.0.0.145(C432).
Merlin_99 said:
Hi everybody, I'm a new p20 lite user and I want to ask you: do you know how to install a original firmware? I've tried to follow the dload method (so I put the update.app file into the dload directory that it's located in the external sd card) but the installation process stops at 5%. I found the update.zip file using firmware finder, the firmware I want to install it's avaiable for me (I checked the imei) and I tried with ota and full ota. Maybe I have to unlock the bootloader or root my device before? If someone need my actual build is ANE-LX1 8.0.0.145(C432).
Click to expand...
Click to collapse
Check somehow if this post can help you:
https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
- 1, 2, 3 and 4 should work without unlock bootloader.
- 5 and 6 is a must unlock bootloader.
- dload folder is not working with this firmware. Dload folder still working but I don't know how to find that specific firmware (dload package).
kilroystyx said:
Check somehow if this post can help you:
https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
- 1, 2, 3 and 4 should work without unlock bootloader.
- 5 and 6 is a must unlock bootloader.
- dload folder is not working with this firmware. Dload folder still working but I don't know how to find that specific firmware (dload package).
Click to expand...
Click to collapse
Ok thank you for your replay. I took a look at the post. I've tried to install the firmware using huawei firmware finder (proxy and dns methods) but nothing to do. I have a question for the Huawei eRecovery method of your post: there's no way to not wipe user data? Because for me it will be annoying. Anyway, why if huawei finder tell me a firmware is approved, then via ota there are no one updates??
Merlin_99 said:
Ok thank you for your replay. I took a look at the post. I've tried to install the firmware using huawei firmware finder (proxy and dns methods) but nothing to do. I have a question for the Huawei eRecovery method of your post: there's no way to not wipe user data? Because for me it will be annoying. Anyway, why if huawei finder tell me a firmware is approved, then via ota there are no one updates??
Click to expand...
Click to collapse
Nowadays FF is not working as did in the past, I hope it be fix soon.
No, is not possible, to install via eRecovery always wipe data partition, at least I don't know how to avoid it.
That happened to me two days ago, I was running B148 and I find that B150 was approved for installation on the FF app, then I checked settings/system/ system update and no OTA there
To update firmware I'm been using HuRUpdater tool
kilroystyx said:
Nowadays FF is not working as did in the past, I hope it be fix soon.
No, is not possible, to install via eRecovery always wipe data partition, at least I don't know how to avoid it.
That happened to me two days ago, I was running B148 and I find that B150 was approved for installation on the FF app, then I checked settings/system/ system update and no OTA there
To update firmware I'm been using HuRUpdater tool
Click to expand...
Click to collapse
Ok I understand, well so I'll wait for OTA update that comes this month...
These update packages should work on global variant Nokia X6.
Usage:
Confirm your current version by dialing *#*#227#*#* before update.
Then download the package and rename to the specific filename I gave, place it to root directory of internal storage and dial *#*#874#*#* to update.
After the update procedure completed, update package will be deleted from your phone automatically.
Global Release:
Note: From DRG-250A build, it blocked current bootloader unlock method, be careful.
Click to expand...
Click to collapse
June 2018 to August 2018 (DRG-250A-0-00WW-B05-229D-0-00WW-B01-update.zip)
August 2018 to September 2018 (DRG-250B-0-00WW-B01-250A-0-00WW-B05-update.zip)
Android Pie November 2018 (DRG-330B-0-00WW-B01-update.zip)
Thanks for your work supporting our device!
Do you have boot image of 250A version?
izkyline said:
Do you have boot image of 250A version?
Click to expand...
Click to collapse
Yes that would be handy. I read that payload_dumper doesn't work on incremental updates. I'm still looking for ways to extract a boot.img
Hi bro I need to unlock the blltloader for my nonia 6.1 ta-1050 . If you could help me plzz
---------- Post added at 11:00 PM ---------- Previous post was at 10:55 PM ----------
My nokia
DRG-250A-boot_patched.img patched with Magisk v17.1:
https://www111.zippyshare.com/v/12gKJE7u/file.html
how to update the path for x6
Hello,
*#*#227#*#* works well.
*#*#874#*#* has no response at all. Is root or bootloader required to do that?
I just realize the X6 I bought from ebay is global firmware version, which does not support OTA. Use OTA to update to latest firmware is a key feature I am looking for. I do not care it is China version or Global version.
Do you have any suggestion that what should be the easiest way? Hopefully no bootloader required. Thanks!
google play pretent CN OTA?
Boss,
After discuss with many other user, we think it is because I am using China version rom, but installed Google play, which pretent OTA update.
Do you think so? Could you give us a solution?
I bought the phone from ebay. I just need OTA.
yshgcs said:
Hello,
*#*#227#*#* works well.
*#*#874#*#* has no response at all. Is root or bootloader required to do that?
I just realize the X6 I bought from ebay is global firmware version, which does not support OTA. Use OTA to update to latest firmware is a key feature I am looking for. I do not care it is China version or Global version.
Do you have any suggestion that what should be the easiest way? Hopefully no bootloader required. Thanks!
Click to expand...
Click to collapse
Will this work on Android one varient i.e , Nokia 6.1 plus?
Do you have boot image of 250B version? I need root my device, boot September, help me
thaidaidong25 said:
Do you have boot image of 250B version? I need root my device, boot September, help me
Click to expand...
Click to collapse
Use the boot image from Nokia 7 Plus. They work. Just don't flash it, only boot it.
thanks for sharing, i just installed the pie version on my nokia 6.1 plus
Hey I just installed the pie version on my Nokia 6.1 plus (TA-1083).
Will the installation void my warranty?
My camera app is crashing like crazy... Is anyone else experiencing this?
xoxoJoelxoxo said:
Hey I just installed the pie version on my Nokia 6.1 plus (TA-1083).
Will the installation void my warranty?
My camera app is crashing like crazy... Is anyone else experiencing this?
Click to expand...
Click to collapse
No, it will not destroy the warranty at all. As for the camera app, go to the app's settings and try wiping its data completely. Then reboot your phone and try again.
DJBhardwaj said:
No, it will not destroy the warranty at all. As for the camera app, go to the app's settings and try wiping its data completely. Then reboot your phone and try again.
Click to expand...
Click to collapse
Well, that didn't do the trick, but I just simply clicked 'disable' after wiping the data and it gave me a message of "uninstalling app and installing factory camera app" which worked beautifully.
Now everything's working fine.
1. *#*#874#*#* is this make my phone rooted ?
because when i type it on my phone, it give message such install, chance data erased, and the last is root
"Would you like to install the following system software?
System upgrade to 330B.B01
You will be unable to use your device or make emergency calls during the upgrade.
It will lead to unexpected result if you cut off power or remove downloaded file while updating software.
There is small possibility of erasing user data caused by upgrade purpose. If need, please backup your data before installing system upgrade.
The normal update can not be guaranteed after the device is rooted. If root contributes to abnormal use on the device in update process, the user should be responsible for it oneself"
2. my type is TA-1116 with build number 00WW_2_50A_SP01, after updating using this method, will it change to another model and build number or not ?
3. is the link that has been shared is the latest update that rolled to some user on 31 October 2018 ?
thank's for sharing the file, and kindly reply to my question
snowdance said:
1. *#*#874#*#* is this make my phone rooted ?
because when i type it on my phone, it give message such install, chance data erased, and the last is root
"Would you like to install the following system software?
System upgrade to 330B.B01
You will be unable to use your device or make emergency calls during the upgrade.
It will lead to unexpected result if you cut off power or remove downloaded file while updating software.
There is small possibility of erasing user data caused by upgrade purpose. If need, please backup your data before installing system upgrade.
The normal update can not be guaranteed after the device is rooted. If root contributes to abnormal use on the device in update process, the user should be responsible for it oneself"
2. my type is TA-1116 with build number 00WW_2_50A_SP01, after updating using this method, will it change to another model and build number or not ?
3. is the link that has been shared is the latest update that rolled to some user on 31 October 2018 ?
thank's for sharing the file, and kindly reply to my question
Click to expand...
Click to collapse
1. Your phone won't be rooted
2. Your phone model won't change but build number, of course, will be changed due to system update.
3. Yes, yes it is.
hoatongoc said:
1. Your phone won't be rooted
2. Your phone model won't change but build number, of course, will be changed due to system update.
3. Yes, yes it is.
Click to expand...
Click to collapse
already installed it last night, and it work's !
thank's for the reply
Will I still receive OTA updates by HMD for my device when I check for it?
xoxoJoelxoxo said:
Will I still receive OTA updates by HMD for my device when I check for it?
Click to expand...
Click to collapse
you will, i already ask it with the support center from my country in indonesia