Samsung galaxy j3 fail (help needed) - Android Q&A, Help & Troubleshooting

i have sm_j327p
itried to formate it but it gives me this message
"factory recovery.img signature check fail"
please tell me what i have to do
and also if i set into it a new cusom rom
will the sim card lock appears again ??
cuz i pay for that key the time i bought my device

abudoganae said:
i have sm_j327p........
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device and variants and is also a location to look at for obtaining some member guidance as well.
https://forum.xda-developers.com/galaxy-j3-2017
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Related

yoga YT2_1380L Boot loader.efi Hard drive .

Hi
I have a problem
When I update a device error occurred ( fastboot failde)
Then the machine continues to this situation
Video demonstrates the problem
I see this post . Bot my Divice is 1380L and not 830L.
help me restore kitkat bios 1380L and install android 4.4.2 on my tablet or make an exe file like (restore-kitkat-bios-830-1050-v2.exe) for 1380 .
thank you .
bivatan said:
Hi
I have a problem. When I update a device error occurred ( fastboot failde)
Then the machine continues to this situation...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to take a look at the following threads that should include your device as well and, if needed, post your question within one of them.
https://forum.xda-developers.com/showthread.php?t=2975096
https://forum.xda-developers.com/showthread.php?t=2975462
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

MIUI ROM Customization

Hello,
I´ve already make a miui ROM for personal use, but i have a little isue on the fresh first time boot there is a wizard startup program on i choose the language country, etc. The realy problem is that i dont wont to use the Micloud enviroment, but if a remove all Micloud apps, on the first boot this startup wizard program force close becaus one of the wizard steps is to configure Micloud. Anyone help me with is?
thanks
zoko said:
Hello, I´ve already make a miui ROM for personal use,...
Click to expand...
Click to collapse
I don't have any devices that use the MIUI Firmware and, without knowing your specific device, I believe that one or more of the following threads may be helpful for what you are looking for and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3250984
https://forum.xda-developers.com/showthread.php?t=2769142
https://forum.xda-developers.com/showthread.php?t=3173019
There's more on the forum but, I believe that these should give you a good start!
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Many thanks, i will read on these links
Ibuprophen said:
I don't have any devices that use the MIUI Firmware and, without knowing your specific device, I believe that one or more of the following threads may be helpful for what you are looking for and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3250984
https://forum.xda-developers.com/showthread.php?t=2769142
https://forum.xda-developers.com/showthread.php?t=3173019
There's more on the forum but, I believe that these should give you a good start!
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse

Asus Zenfone 400cg baseband unknown

I need help. how can i fix this?
The sim cards are not detected and baseband are unknown. It occured after installing an update with the same firmware version of zenfone 400cg WW 6.6.3 . The update was not finished because an error occured where an android lying down. It reboots then the sim cards were not detected.
ggxd080808 said:
I need help. how can i fix this? The sim cards are not detected and baseband are unknown. It occured after installing an update with the same firmware version of zenfone 400cg WW 6.6.3 . The update was not finished because an error occured where an android lying down. It reboots then the sim cards were not detected.
Click to expand...
Click to collapse
I don't have this device but, the following post, with a possible fix, may have what you need that's specific to your device.
https://forum.xda-developers.com/showthread.php?p=65302153
You can always try to obtain some member guidance within the following Q&A thread that's specific to your device as well.
https://forum.xda-developers.com/showthread.php?t=3302917
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, the following post, with a possible fix, may have what you need that's specific to your device.
https://forum.xda-developers.com/showthread.php?p=65302153
You can always try to obtain some member guidance within the following Q&A thread that's specific to your device as well.
https://forum.xda-developers.com/showthread.php?t=3302917
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks for your response. It really helped me. It is now fixed:laugh:

broken new moto g5 after installing TWRP

hello everybody,
I hope you can help me ! I got yesterday a new moto g5 and am trying to install a custom ROM on it. as a preparation I unlocked succesfully the boot loader using adb and fastboot, from a linux machine. i did encounter a problem that fastboot was functioning only using sudo. but then all went well.
then i downloaded the twrp image and installed it like this : sudo ./fastboot flash recovery twrp.img
I rebooted the phone from the command line and entered the recovery mode. from there i did a backup ( I have nothing important on the phone) and restarted the phone.
since the reboot the operating system is not starting anymore. it stays on this screen that says : your phone is unlocked and not trusted. will boot in 5 secs. and does nothing.
you can not turn it off using the power button.
the only thing you can do is going in the recovery mode then it loads the twrp interface.
if i use adb devices now it shows :
ZY322BV4HP no permissions (user in plugdev group; are your udev rules wrong?); see bla bla...
before installing twrp.img it showed : ZY322BV4HP device
i did not root the phone but set twrp to write to the boot partition.
I tried to restore the backup I had made. the action was successful but it did not solve my problem.
thank you for reading and may be helping !
curious&new said:
hello everybody, I hope you can help me ! I got yesterday a new moto g5 and am trying to install a custom ROM on it....
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=3699737
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
thanks a lot !
Ibuprophen said:
I don't have this device but, your best bet is to post this question within the following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=3699737
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
I could find a good tip there and now the problem is solved !!
curious&new said:
I could find a good tip there and now the problem is solved !!
Click to expand...
Click to collapse
I'm happy to see that it worked out for you!
Just keep in mind that, if you have a device that has a dedicated area on the forum, your best bet in locating/posting a resolution somewhere within it.
Also, most (unfortunately not all) of the big developments like TWRP, LineageOS, etc... Will have a dedicated thread that's specifically for instructions, support and member guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I'm happy to see that it worked out for you!
Just keep in mind that, if you have a device that has a dedicated area on the forum, your best bet in locating/posting a resolution somewhere within it.
Also, most (unfortunately not all) of the big developments like TWRP, LineageOS, etc... Will have a dedicated thread that's specifically for instructions, support and member guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
So this is what helped :
directly from this link : https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737
I followed the special instruction for stock rom users to flash dm-verity zip and it worked like a charm...

Samsung N900V Command Unlock Bootloader Text File

PLease Can Any One Help Me With Samsung N900V Bootloader Unlock File..The One I Downloader , After i Unzip It With Computer/PC I Found Something Else Inside I Didn't See The Command Text File In It. Please Help Me.
gentlelord6 said:
PLease Can Any One Help Me With Samsung N900V Bootloader Unlock File....
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official Bootloader Unlock thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3359370
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Categories

Resources