Hi all, so i'm build kernel from source
Kernel patched from kernel.org to 3.18.36
What's new?
Add Governors:
1. smartassV2 (on by default)
2. yankaactive
3. smartmax_eps
4. smartmax
5. barry_allen
6. zzmoove
NEW, MAYBE UNSTABLE
1. pegasusq
2. ondemand_x
3. ondemandplus
4. intelliactive
5. HYPER
6. electrodemand
7. darkness
8. dancedance
9. blu_active
10 alucard
11. bioshock
Add I/O Schedulers:
1. zen (on by default)
2. bfq
3. sio
4. sio_plus
Add Hotplugs:
1. IntelliPlug
2. Alucard
3. Bricked
4. Zendecision
Features:
1. Frandom
2. Optimized slub
3. Disabled gfs
4. vm.swappiness=0
5. Disabled crc check
More info about i/o schedulers, governors and hotplugs you find here and here
https://mega.nz/#!Bl0Tyb6b!IZfuJFqC1UTQMfRvUkF0Sf5lK-TycI03ueoihtXV5mw stable
https://mega.nz/#!AllThZCY!PDel-1mT-O7_yt7i-VHXjPuJDx0oiYloMk_ks7qynrQ need test with alot governors
Thanks for sharing jokerank and welcome to XDA. :good:
Good to see some well overdue development for this device at long last
bigrammy said:
Thanks for sharing jokerank and welcome to XDA. :good:
Good to see some well overdue development for this device at long last
Click to expand...
Click to collapse
Thanks you too for good feedback
Awesome:good: when build rom for xa ultra
uhes said:
Awesome:good: when build rom for xa ultra
Click to expand...
Click to collapse
I try to port and build from sources Lineage OS 14.1, and now it's does not work One man from 4pda try build too (for XA, not XA Ultra) , and him see bootanimation right now if he made lineage from source, i port to us devices not problem i think.
p.s sorry for my english, hope u understand me)
Jokerank-4PDA said:
I try to port and build from sources Lineage OS 14.1, and now it's does not work One man from 4pda try build too (for XA, not XA Ultra) , and him see bootanimation right now if he made lineage from source, i port to us devices not problem i think.
p.s sorry for my english, hope u understand me)
Click to expand...
Click to collapse
Why not build lineage os15 only bro
Reflashed my phone back to clean and added this kernel, good work man ?
uhes said:
Why not build lineage os15 only bro
Click to expand...
Click to collapse
Because it's Android Oreo, and need to build kernel (without sources) Hard for me, and took too many time
Jokerank-4PDA said:
Because it's Android Oreo, and need to build kernel (without sources) Hard for me, and took too many time
Click to expand...
Click to collapse
Ok, thank you:good:
Great to see development for this device
Hope we will have stable los14.1 atleast looking forward
Btw thanks again mate
Thanks all guys! Glad to see good fedback in this board
Can I directly flash the boot.img on this ?
Akki said:
Can I directly flash the boot.img on this ?
Click to expand...
Click to collapse
Sure, it's 7.0 and kernel flash on any XA Ultra devices, if it's wrong nothing bad, just flash old boot.img
Man you are AWSOME !!!
why666me said:
Man you are AWSOME !!!
Click to expand...
Click to collapse
Thanks
Now test kernel may stable but need more testing, governor: alucard save more battery with i/o sioplus for me, if who want battery life, use this pair
dttw / ok google to wake?
Hi @Jokerank-4PDA
Does this kernel allow me to wake my XA Ultra using double tap or ok google? Or is there another way to get this work? I'd really like to test these features even if it drains my batterie..
Best regards and thank you
dionarap said:
Hi @Jokerank-4PDA
Does this kernel allow me to wake my XA Ultra using double tap or ok google? Or is there another way to get this work? I'd really like to test these features even if it drains my batterie..
Best regards and thank you
Click to expand...
Click to collapse
Not possible for this device to use double tap i'll try port dt2w and sweep2wake, but it not work Idk about ok google didn't use this, if i'm not misstake this is not a kernel level
Jokerank-4PDA said:
Not possible for this device to use double tap i'll try port dt2w and sweep2wake, but it not work Idk about ok google didn't use this, if i'm not misstake this is not a kernel level
Click to expand...
Click to collapse
well, thank you
I found an app called "DoubleTap to lock" which makes it possible to wake my XA Ultra using double tap but it drains batterie fast in deed.. Like the screen is always on (which in fact is correct, there's no deep sleep with this app active).
But now I found an app called "WaveUp" which makes it possible to wake my device by touching the distance sensor - works fine and seems to not drain the batterie this fast.. I'll keep watching it
best regards
can someone help me flash this on my device ? F3212 build 36.1.A.0.182
i'm kinda new to all this stuff
Related
Just a simple & fast kernel. Go ahead, give it a try!
Features
CPU
-Min=384MHz
-Max=1512MHz
-Overclock=1998MHz
CPU Govoners
-Interactive
-Ondemand
-Conservative
-Performance
CPU Hotplug
-Franco's Hotplug (ported from Nexus 4 - mako )
GPU
-Min=128MHz
-Max=400MHz
-Overclock=533MHz
GPU Govoners
-Simple
-Ondemand
IO Schedulers
-Deadline
-NOOP
-CFQ
-ROW
Other Features
-Sweep to wake/sleep
-Double Tap to wake.
-Latest Linux 3.4.y patches
-TCP Congestion Control
-Linaro 4.8.2 Toolchain
-O3
-MP-Decision disabled
-Dynamic fsync
-Voltage control
-Other stuff
Credits
faux123
franciscofranco
n3ocort3x
anarkia1976
jassycliq
showp1984
lots of others (let me know if I missed you)
Downloads
Latest: DanKernel - r12
Older:
DanKernel - r11
DanKernel - r10
DanKernel - r9
DanKernel - r8
Changelog
r12
Added Sweep to wake/sleep and double tap to wake.
Now compiling with Linaro 4.8.2 - 09.13
Added a few other patches - check git.
r11
Merged Linux 3.4.62
Merged updates from JSS15R
Removed a bunch of useless debugging.
Changed some defaults for better performance.
r10
Push GPU OC to 533MHz
Set default GPU freq 400MHz
r9
Updates to SLUB memory allocator
Merged Linux 3.4.61
Change to touchboost code so it gets called a bit faster
Updated to Linaro 4.7.4 08/13 toolchain
Few changes to the governor defaults for some battery saving.
Lots of other patches - check git
r8
-Fix root issue - flash your ROM then r8, if coming from r7.
-Some patches from Franco's Hotplug
-Lots of patches from CodeAurora.
-Some reverts to give more stability.
Other Comments
Please let me know if there are any issues or if you have any recommendations - always looking to improve!
Source can be found here
Disclaimer: As usual, I'm not responsible for any damage etc that may happen to your device while using this kernel.
Just in case...
I'll give this a try sir and report back later!
Sent from my Nexus 7 using xda app-developers app
The list of original developers here keeps growing and growing every day, it's so awesome I'll give this one a try
Sent from my Nexus 7 using xda app-developers app
Quick question. So the kernel runs at a default of 1512mhz right? And you'd have to manually set it to 1.9ghz if you'd want that speed? Was hoping someone could clarify.
Sent from the dark side of the moon
scandalousk said:
Quick question. So the kernel runs at a default of 1512mhz right? And you'd have to manually set it to 1.9ghz if you'd want that speed? Was hoping someone could clarify.
Click to expand...
Click to collapse
Yes, that's correct.
R930 said:
Yes, that's correct.
Click to expand...
Click to collapse
Thanks for clarifying mate. I just flashed it and I'm going to leave it running the way you set it up, don't see a reason to stray away from stock settings. Everything is running smoothly, good job on the kernel man.
I also just noticed that all the default settings are highlighted in bold silly of me to not look properly
Sent from the dark side of the moon
Okay so it breaks my n7s root
smartyenrique said:
Okay so it breaks my n7s root
Click to expand...
Click to collapse
What ROM are you running? what super user app?
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Svenmaster said:
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Click to expand...
Click to collapse
Did you reflash the supersu zip after the kernel to see if that fixes it?
noneabove said:
Did you reflash the supersu zip after the kernel to see if that fixes it?
Click to expand...
Click to collapse
yep tried that, but still no root
Testing this out now, love Franco kernel so this should be a nice kernel to use until he gets his hands on a flo
No issue with root loss for me running CM with superSU, battery is at 92% with 1hour 10min screen on so is looking pretty good, and has been a lot smoother than Faux kernel!
Hi Guys,
Sorry was away on holiday... Got back a day ago - Probably not the best timing for a kernel release
smartyenrique said:
Okay so it breaks my n7s root
Click to expand...
Click to collapse
Svenmaster said:
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Click to expand...
Click to collapse
So I look to have resolved the root issue. (fingers crossed)
Can you please give r8 (download here) a try and report back. You will need to flash ROM first if your still on r7.
Have tested it myself, looks to work OK on cm10 and stock.
Thanks
Trying r8, everything seems fine so far, kept root too However I would suggest people try ondemand instead of interactive, it gives as good performance with fewer random CPU spikes and no insane ramping on touch, it's what the nexus 4 uses by default now and i think it's the best balance
with r8 root is working just fine
Hello guys, I just wanted to know how it's going with this Kernel since I'm considering to try out some Kernel's.
Thank's in advance.
Best wishes
snOwjAwk said:
Hello guys, I just wanted to know how it's going with this Kernel since I'm considering to try out some Kernel's.
Thank's in advance.
Best wishes
Click to expand...
Click to collapse
Very good, until franco gets here it's a great alternative
noneabove said:
Very good, until franco gets here it's a great alternative
Click to expand...
Click to collapse
Thank's buddy heard of it aswell, but noone knows when he will arrive
EDIT: Btw how about init.d support?
cheers
noneabove said:
Very good, until franco gets here it's a great alternative
Click to expand...
Click to collapse
Is he planning to arrive? Maybe his flight is delayed...
Sent from my Nexus 7 using Tapatalk 4
*Initial version: v0.1*
AOSP m7 cm-12.1
Based on AGK v1.71 (containing all the original wake gestures: sweep2wake, logo2menu, double tap to wake)
F2FS support from latest msm8960 repo on cm-12.1
GCC KBUILD_CFLAGS tweaks from SiliconValley kernel (oodles of optimizations)
Using SiliconValley initrd (ramdisk)
- cpu governors: plenty of them: intellidemand, ondemand, interactive, smartass, smartassV2, ...
- mpdecision, intelliplug, ecomode tweaks
- highest frequency at 2,1Ghz, lowest at 0,081Ghz, good for saving more battery
- gives more than 36 hours of battery life on a moderately used phone with steady mobile signal
install using fastboot: sudo fastboot flash boot jekkoskrnl.img
*21/12/2015: v0.1 Update*
Performance tweaks: disabled GPU underclock.
Min frequency is set to 128Mhz (was 64)
Max frequency is set to 487Mhz (was 450)
download link: bit.ly/1IjAEGw
*23/01/2016: v0.2 Update*
Dissable reboot on mdm start timeout (causing occasional kernel panics)
Improve GPU frequency upscaling to reduce lagging
Merge of upstream Cyanogenmod fixes
Disable htc one wire headset patch (causing occasional kernel panic with alternative earset)
download link: http://bit.ly/1ZU2yRK
github (cm12.1 branch) link: https://github.com/jekkos/android_kernel_htc_msm8960
jekk0s said:
This is a thread containing a link to my kernel build for
AOSP m7 cm-12.1
download link: bit.ly/1IjAEGw
github link: https://github.com/jekkos/android_kernel_htc_msm8960
Click to expand...
Click to collapse
Hey @jekk0s Thanks for that.
Just 1 Q
Is your Git source up to date? I just built your kernel and the version I built has a few less CPU governors then the .img you uploaded
Other then that Kernel works great! Compiled with UberTC-4.9
Thanks again.
Joeisgood99 said:
Hey @jekk0s Thanks for that.
Just 1 Q
Is your Git source up to date? I just built your kernel and the version I built has a few less CPU governors then the .img you uploaded
Other then that Kernel works great! Compiled with UberTC-4.9
Thanks again.
Click to expand...
Click to collapse
Ok I might have forgotten to push those last set of config changes, will have a look later today and get back to you.
jekk0s said:
Ok I might have forgotten to push those last set of config changes, will have a look later today and get back to you.
Click to expand...
Click to collapse
I've updated the github with some more local changes. To enable the governors you'll need to use the m7_defconfig
make m7_defconfig
jekk0s said:
I've updated the github with some more local changes. To enable the governors you'll need to use the m7_defconfig
make m7_defconfig
Click to expand...
Click to collapse
Thanks for that!
Joeisgood99 said:
Thanks for that!
Click to expand...
Click to collapse
Does this work on exodus ROM?
Your kernel is pretty good on batery life but my phone tends to stutter and lag on this kernel.
Sinistersky said:
Does this work on exodus ROM?
Click to expand...
Click to collapse
No, it doesn'twork
crownvn said:
No, it doesn'twork
Click to expand...
Click to collapse
It does for me.
crownvn said:
No, it doesn'twork
Click to expand...
Click to collapse
Neither does it for me
steinsgateislove said:
It does for me.
Click to expand...
Click to collapse
what does rom ?
steinsgateislove said:
Your kernel is pretty good on batery life but my phone tends to stutter and lag on this kernel.
Click to expand...
Click to collapse
Think the default governor might not be the best. I'm using intellidemand which makes the phone work smoothly in most situations.
Works great on CM12.1. Is there anyway that I could set the minimum GPU frequency on boot? Maybe using an init.d script?
Sinistersky said:
Does this work on exodus ROM?
Click to expand...
Click to collapse
Works for me on 'exodus-5.1-20151225-NIGHTLY-m7.zip'
EDIT: I take it back, won't complete booting, just hangs on the boot animation...
jekk0s said:
Think the default governor might not be the best. I'm using intellidemand which makes the phone work smoothly in most situations.
Click to expand...
Click to collapse
will the kernel work with android m, please?
Very VEEEERY good work . Love the overclock 2.1 GHZ !!!!!! i can see the difference in games . work on Exodus 5.1.1 2016 but , lagging on music , unloking or keyboard use . higher GPU frequencies can be use ? Like 500mhz ,or like same sense kernel (587 MHz :0 )
Sorry for my english ^^
which software you guys using for tuning kernel.
I tried several, after restart its resetting some times even after exiting the app. I am encountering frequent restarts and higher temperature.
Tried clean, still issue persists. I can't live without double tap to wake and sweep to sleep.
Device being secondary, not interested in much performance , I just need basic features and stability. I tried under volt the cpu , it didn't boot then.
Was on ARHD and elementalx before. Was going good.
Recently jumped to cm.
Any suggestions?
I use Ex kernel manager for change my CPU and gpu frequencies , active fastcharge , ....
I hope that the next update propose more gpu frequencies , the currents , and more higher really more than 450
On exodus rom the phone seems stable , but lag on internet or music use (unpleasant) :/ I've try differents gorvernor but no real change ...
Do I need to flash it using the command line or can I use Flashify for that? [emoji4]
Stachura5 said:
Do I need to flash it using the command line or can I use Flashify for that? [emoji4]
Click to expand...
Click to collapse
Flashify should work fine. I used it myself.
Custom version of Blackscreen Kernel by mosimchah
Check out this thread for info:
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976
Read the second and third posts on original thread for more info on the kernel settings, and features, and how to get better performance and battery life and stuff like that
Install instructions:
1. Download : Blackscreen 3 OR: Blackscreen 3.5.i (14/08/2017) OR: 3.5.i with OC (not oc'd by default)
2. Flash in twrp.
3. Reflash Root
4. Use Kernel Adiutor from playstore to change kernel settings or anything else that tickles your fancy.
AICP ROM with black screen built in:
Build 17/11/2017
https://drive.google.com/open?id=1BSB1V6f23I6xabAXXtRXqrz3ISX9pS6H
Build : 27/09/2017
https://drive.google.com/open?id=0B4k5OpXTXcS9MG5pTXlESmp4MU0
Build : 15/09/2017
https://drive.google.com/open?id=0B4k5OpXTXcS9NmZsdzE4bnI4Njg
Older:
https://drive.google.com/open?id=0B4k5OpXTXcS9aGZvLWFTQ1FKZDQ
One more kernel , onemore choose
i flashed it and camera isnt working anymore,pls fix this flashed with rr build
Can you port kernel from mi5 SlimDragons rom ?) they made good kernel )
Thanks, will try it later is it possible to port EAS?
This is the andr68rus link to various extras, included is the link to the flashable remote files
https://drive.google.com/open?id=0B-2l1xmYBAzsa0pReTA0RWZhN1E
binkaa2 said:
i flashed it and camera isnt working anymore,pls fix this flashed with rr build
Click to expand...
Click to collapse
Weird camera works fine for me but I use cm14.
Can you get a logcat?
What camera app and what happens? Just a blank screen?
infrag said:
Weird camera works fine for me but I use cm14.
Can you get a logcat?
What camera app and what happens? Just a blank screen?
Click to expand...
Click to collapse
same here , camera is not working:crying:
sky104hk said:
same here , camera is not working:crying:
Click to expand...
Click to collapse
Ok the problem occurs because both andr68rus and I have named our camera shims differently.
Also lineage has their own name for it.
In this kernel I used the Lineageos naming as I thought that was the standard. (at least I'm 90% sure I did )
@andr68rus please can we standardise on the lineageos naming system and both change our sources to suit?
Once he has updates RR I'll upload the updated kernel and all should be good. Of course since I've wiped my phone to try this out I'll test it first with RR this time just to make sure.
infrag said:
Ok the problem occurs because both andr68rus and I have named our camera shims differently.
Also lineage has their own name for it.
In this kernel I used the Lineageos naming as I thought that was the standard. (at least I'm 90% sure I did )
@andr68rus please can we standardise on the lineageos naming system and both change our sources to suit?
Once he has updates RR I'll upload the updated kernel and all should be good. Of course since I've wiped my phone to try this out I'll test it first with RR this time just to make sure.
Click to expand...
Click to collapse
So, will this change make stock camera fully working?
Also, regarding signal reception
at my desk the signal is weak
any idea if we could make signal reception better,
as per my experience LOS based roms or Mokee feel like does not have stock like signal reception feature,
feels bit unstable(always trying disconnecting/connecting)...
which causes the main battery drainage(dual sim, both weak signals)
infrag said:
Ok the problem occurs because both andr68rus and I have named our camera shims differently.
Also lineage has their own name for it.
In this kernel I used the Lineageos naming as I thought that was the standard. (at least I'm 90% sure I did )
@andr68rus please can we standardise on the lineageos naming system and both change our sources to suit?
Once he has updates RR I'll upload the updated kernel and all should be good. Of course since I've wiped my phone to try this out I'll test it first with RR this time just to make sure.
Click to expand...
Click to collapse
Tks for ur hardwork, hope u can fix this on the next update bro! I really want to use the kernel, or is there any way to fix the camera problem? Also the flashlight cannot turn on, currently im usingI andr68us's DU build
Hi:
Where is the kernel?
Where can I download the kernel?
Thanks for your job
infrag said:
Thanks to @mosimchah for his hard work on Blackscreen kernel. I've just ported it to X2.
BlackScreen is meant to give you great battery life and performance (depending on how you tune it , more on that later in the second post).
Please read original thread for details.
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976
Whats working:
this space intentionally left blank
Fixed Ambient Display
Added in stock LeEco charger settings to fix OTG & USB headphones.
Whats not working:
Dodgy camera as every other X2 kernel/rom atm.
I doubt IR works. Someone want to supply me a .zip with it so I can test? (I cant be bothered extracting)
Install instructions:
Download .zip
link removed while i check camera...
Flash in twrp.
Reflash Root?
Use Kernel Adiutor from playstore to change kernel settings or anything else that tickles your fancy.
Here are some of the features
f2fs not working yet as I dont care and havent turned it on.
(check out the third post on original thread for more info)
CPU:
ability to disable all input boosters
darkness governor- credit to @villarleg for porting it to our device
Lionfish governor-credit to @villarleg for porting it to our device
blue_active governor (not for the eas build)
nebula governor
wheatley governor
lionheart governor
bioshock governor
impulse governor
Alucard Hotplug driver
GPU:
Adreno boost
Adreno idler
I/O:
Improved deadline
improved cfq
bfq
sio
fiops
tripndroid
sioplus
zen
Virtual memory:
various optimizations
entropy:
some optimizations
tcp-algorithms:
bic
westwood
htcp
hstcp
vegas
scalable
lp
veno
yeah
illinois
Misc:
fsync toggle
Many more optimizations
Several wakelocks have been blocked
Added the ability to tweak the thermal throttle settings (be very careful with this)
Read the second and third posts on original thread for more info on the kernel settings, and features, and how to get better performance and battery life and stuff like that
Thanks to:
etc
Click to expand...
Click to collapse
Thanks.
Does this kernel has undervolting capability? Le max 2 has very weak battery.
infrag said:
@andr68rus please can we standardise on the lineageos naming system and both change our sources to suit?
Click to expand...
Click to collapse
Nice work, thanks I will use LOS naming system next build. I will repack kernel with my ramdisk and put link for < 05/09 RR-N.
PS. Where I can download kernel?
Hope this kernel gets fixed soon, you're doing great work on the Le Max 2, thanks for your contributions!
Also hopefully you and @andr68rus find the naming fix and that this kernel gets integrated into RR, AOKP, DU and the rest of the Nougat roms, I can see it being a great SoT fix for Nougat ROMs.
( for me this kernel is hopeless ((( my problem with camera on nougat roms seems unfixable for now (((
andr68rus said:
Nice work, thanks I will use LOS naming system next build. I will repack kernel with my ramdisk and put link for < 05/09 RR-N.
PS. Where I can download kernel?
Click to expand...
Click to collapse
Thanks.
I pulled the link as it didnt work on Cr3pts Unoffical LAOS cm14.1 either.
However it turns out he hasnt updated his libc shim name either so I've re-added the download link.
Wheres your new link so I can test on RR?
xuser_ said:
So, will this change make stock camera fully working?
Also, regarding signal reception
at my desk the signal is weak
any idea if we could make signal reception better,
as per my experience LOS based roms or Mokee feel like does not have stock like signal reception feature,
feels bit unstable(always trying disconnecting/connecting)...
which causes the main battery drainage(dual sim, both weak signals)
Click to expand...
Click to collapse
No it wont fix stock camera. I didnt imply that so...
As far as signal reception goes I dont have issues with reception.
I do see some stuff in the logs about disconnecting reconnecting and i'll probably have a look at it one of these days. Not sure IF I can do anything but I'll try.
Gnomchar said:
( for me this kernel is hopeless ((( my problem with camera on nougat roms seems unfixable for now (((
Click to expand...
Click to collapse
Whats your problem on Nougat roms?
I think I read something about focusing or something?
If so I have an idea but you will need to pull some logs while camera is semi working for you.
adb logcat > logcat.txt
adb shell dmesg > dmesg.txt
sky104hk said:
Tks for ur hardwork, hope u can fix this on the next update bro! I really want to use the kernel, or is there any way to fix the camera problem? Also the flashlight cannot turn on, currently im usingI andr68us's DU build
Click to expand...
Click to collapse
Flash andr68us's 'fixed' build. (just renamed a file basically)
His future builds should work with this.
There's a new kernel working on our P10, it was made for Honor 9 and updated to make it work on P10.
Here is the link to the thread Proto8 Kernel
Everything is working, wifi, bluetooth, hotspot, just try it yourself! The kernel is stable and very fast.
FEATURES
- Compiled with Linaro AArch64 GCC 4.9 2017.01 (ARMv8,A53 Optimized)
- UV (UnderVolt) on both CPU Clusters and GPU for better efficiency (All thanks to @nutcasev1.5)
- Energy Aware Scheduling (EAS) with "Sched" CPU Governor
- Kirin Hotplug Flow
- Aggressive GPU Suspend on Low Frequencies
- Swap disabled
- Reduced Kernel Wakelocks
- Advanced TCP Algorithms with "Westwood" Default
- Reactivation of the "setenforce" command
- Wireguard VPN Support
All the credits to @JBolho and @nutcasev1.5 for their work (hit the Thanks button :good
Download link: [url]https://www.androidfilehost.com/?fid=11050483647474829090[/URL]
Latest version: Version 2.0R - 06.29.18
Major Milestone Update
- Upstreamed to 4.4.73
- New Optimal Timer Frequency - 156HZ Set as Default
- Go Tickless - Enable Full Dynticks System
- Power Efficient Workqueues can now be toggled
- Revert CPU DDR Link Enabling and other HiSi CPU Functions
- Keep Kirin Specific SMP Flow but move to ARM big.LITTLE CPUFreq Driver
- Reduce Kernel Max Wakelocks down by 90% relative to Stock
- Minor RAM and DevFreq Tweaks
- GPU Scene_Aware Tuned for Power Efficiency
- Minor Log Spam on CPU's Silenced
- Reduce Timeout to Stop Processes and Enter Sleep
- Optimized Sound Output Gains and Eliminate Rates below 16Khz
- Implement UKSM 0.1.2.6
- Upgrade SchedTune Boost to v3
- Major Update to Spectrum Profiles to accomodate new features as well
- Update Wireguard to 0.0.20180620
sfoot13 said:
There's a new kernel working on our P10, it was made for Honor 9, here's the link: https://forum.xda-developers.com/honor-9/development/kernel-proto8-kernel-t3780551
I installed it yesterday and the only thing that is not working is the wifi and bluetooth.
Click to expand...
Click to collapse
Hey man, glad you liked it, but at least you could mention the Developers and at least give me a heads-up like "Hey, can i share the thread on the P10 forums?"
Kind of taken by surprise here
Thanks for the support.
JBolho said:
Hey man, glad you liked it, but at least you could mention the Developers and at least give me a heads-up like "Hey, can i share the thread on the P10 forums?"
Kind of taken by surprise here
Thanks for the support.
Click to expand...
Click to collapse
I'm sorry bro., I was going to add the credits later, but it was a mistake not to ask you before, sorry. (I'll edit the thread now)
Your kernel is very fast :good:
sfoot13 said:
I'm sorry bro., I was going to add the credits later, but it was a mistake not to ask you before, sorry. (I'll edit the thread now)
Your kernel is very fast :good:
Click to expand...
Click to collapse
Thank you. And it's not just me, @nutcasev1.5 is also Developer of the kernel.
kernel without wifi and bluetooth is kind of useless.
DallasCZ said:
kernel without wifi and bluetooth is kind of useless.
Click to expand...
Click to collapse
Not for me.
JBolho said:
Thank you. And it's not just me, @nutcasev1.5 is also Developer of the kernel.
Click to expand...
Click to collapse
@JBolho Done, I added the credits bro.
I don't know if is possible to fix the wifi and bluetooth for our device, I know that it was made for Honor 9, so if it is not possible, don't worry bro, and thank you so much
sfoot13 said:
@JBolho Done, I added the credits bro.
I don't know if is possible to fix the wifi and bluetooth for our device, I know that it was made for Honor 9, so if it is not possible, don't worry bro, and thank you so much
Click to expand...
Click to collapse
It's possible that it's just a matter of drivers, I'll look into it when I have the chance, but no ETA of course.
JBolho said:
It's possible that it's just a matter of drivers, I'll look into it when I have the chance, but no ETA of course.
Click to expand...
Click to collapse
Yes! :laugh: :fingers-crossed:
Thank you so much, take your time, I never ask for ETA.
One question: You'll need the stock drivers? Because I was searching and their are placed into Vendor/lib/modules, so what if I backup my stock drivers, flash your kernel and restore my stock drivers... I'll see if it works
Update: It didn't worked
sfoot13 said:
Yes! :laugh: :fingers-crossed:
Thank you so much, take your time, I never ask for ETA.
One question: You'll need the stock drivers? Because I was searching and their are placed into Vendor/lib/modules, so what if I backup my stock drivers, flash your kernel and restore my stock drivers... I'll see if it works
Update: It didn't worked
Click to expand...
Click to collapse
The proper stuff needs to be compiled in the kernel, don't brick your device in anticipation
JBolho said:
The proper stuff needs to be compiled in the kernel, don't brick your device in anticipation
Click to expand...
Click to collapse
While I'm waiting, I'll keep using your kernel
Thank you so much for the support. :laugh:
sfoot13 said:
While I'm waiting, I'll keep using your kernel
Thank you so much for the support. :laugh:
Click to expand...
Click to collapse
You have a PM, check it out.
JBolho said:
You have a PM, check it out.
Click to expand...
Click to collapse
Thank you so much, I'll check it
As confirmed now by @sfoot13 this kernel is now fully compatible with the P10. Separate download link added on thread's OP because both devices require separate compiles.
Remeber this was originally designed for the Honor 9 but from now on it should continue to be 100% compatible with the P10 as all incompatibilities have been apparently solved.
All the thanks to @JBolho :good: he made it possible
Thank you all for giving us a Kernel
I hope you don't mind the question: So it uses another energy management, does that mean there is no 'scrollable widgets freeze' bug?
Yes I could unlock and try myself but it's my daily phone at the moment :-|
Swaddy said:
Thank you all for giving us a Kernel
I hope you don't mind the question: So it uses another energy management, does that mean there is no 'scrollable widgets freeze' bug?
Yes I could unlock and try myself but it's my daily phone at the moment :-|
Click to expand...
Click to collapse
If there's such a bug, I've never experienced it, and it's more likely a rom thing, not the kernel fault...
My device is the only one I have and I need it everyday, so... This is not some "alpha ultra experimental thing" that may or may not explode on your pocket, so don't worry
Unlocking the bootloader does force a factory reset though. It's a pain, i know...
I also never had problem with widgets on this kernel and also on stock kernel.
To the actual users: how this is compared with hyperkernel from p10 plus?
Kernel has been updated to v1.2R, new and tuned I/O and updated CPU drivers and Sched Gov.
WIP. Hello everyone. My main priority was to have OC in the latest LOS 16 build, or at least to have that on pie. While I know our hedgehog fan is busy making AICP, I told myself that I should make this happening. This kernel is forked from original LOS16, so it will work with (almost) all versions. Use this version IF you want to have stable official LOS kernel ONLY with overclocked added, or if you can't use Blackscreen. FOR NOW, I recommend using this kernel for pie builds, until BS PIE will get released.
Disclaimer:
Code:
/*[/SIZE][/CENTER]
[SIZE=3][CENTER]* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Based on latest LineageOS Sources
Amazing battery life while maintaining performance
CPU governors: interactive(recommending), conservative, ondemand, userspace, powersave, performance
CPU and GPU frequencies are both OVERCLOCKED (CPU Little: 307/1728 BIG: 307/2265, GPU 133/729)
CPU screen has been OC-ed to 60Hz(from 57) - more fluidity
I/O schedulers: bfq (default), noop, deadline(recommending), cfq
TCP Algorithms: cubic(d/r), reno
Power efficient workqueues and idle power consumption is reduced to the absolute minumum
SafetyNet bypass
Many more under the hood improvements, the code speaks for itself.
Fast Charge and other improvements are coming
[*]Compiling with Linaro is coming
How to install:
You can install this kernel by flashing it through your favourite recovery (TWRP, Redwolf, etc).
Changelog:
V1: Added OC for CPU/GPU/Screen.
Compatible for now
SESH - LineageOS
Seshstation-v1NOS - NitrogenOS
Downloads:
XXXXX
Telegram Group:
XXXX
[/URL]
[/CENTER]
Mod Edit: Links removed
Credits:
@christpp one of my best teacher, if you want to help me, than just help this guy. Whitout him nothing would be possible :3
@ThE_MarD the second guy, who helped me with every problem I had. Don't thank me, thank to this 2 guy!
@codeworkx the man behind everything
@KuranKaname ceaoles
@mosimchah for being lazy and letting me the opportunity to make this
All LeEco users and devs!
Screenshots
Coming soon
D1stRU3T0R said:
Note: right now I'm testing in benchmarks. Gonna release it on 13/05/2018.
Click to expand...
Click to collapse
U wot m8?
Sony make.belive said:
U wot m8?
Click to expand...
Click to collapse
This score was achieved on x722 not x720. Highest score i ever had I guess, and I'm not even done yet.
D1stRU3T0R said:
This score was achieved on x722 not x720. Highest score i ever had I guess, and I'm not even done yet.
Click to expand...
Click to collapse
That is a very high score, I agree
I'm also happy for this Pie Kernel!
But I pointed on your release date, its a bit outdated, dont you think?
Sony make.belive said:
That is a very high score, I agree
I'm also happy for this Pie Kernel!
But I pointed on your release date, its a bit outdated, dont you think?
Click to expand...
Click to collapse
Xd lol, convert it, that's January 5 2019 kappa
thanks man downloading now
@D1stRU3T0R
Congrats Dude!
How is this new kernel beauty going ...?
osmingab85 said:
How is this new kernel beauty going ...?
Click to expand...
Click to collapse
Hi. It is good if you want OC on stable los kernel and you don't want to install BlackScreen. Nothing special.
thank you!
Anyone have try it with Nitrogen os?
EDIT: it's working with Nitroges OS last build (11-08-2018)
If there is a demand, i can update it regularly.
Does your phone overheats?
Coconut tree said:
Does your phone overheats?
Click to expand...
Click to collapse
If you're using LOS than it's posibile to overheat, because los thermal engine isn't working. Not my fault, but at some restarts it's working actually.
Yesterday I tryied this kernel.
Today I come back to the original Nitrogen OS.
Why?
Because yesterday my wifi was broken (it show connected but without internet access). I've try in all my 3 net.
And in 4G it show an X over the signal icon.
After a reboot it fixes the problem.
You know that I love you
I'm waiting for your work to continue. @D1stRU3T0R
Thank you will try it for a few days.
BadCluster said:
Yesterday I tryied this kernel.
Today I come back to the original Nitrogen OS.
Why?
Because yesterday my wifi was broken (it show connected but without internet access). I've try in all my 3 net.
And in 4G it show an X over the signal icon.
After a reboot it fixes the problem.
Click to expand...
Click to collapse
Interesting, maybe n os is too modified and not based on lineageos.
Remember, lineageos =/= nitrogen os
Is this kernel compatible with nougat?
tomgar said:
Is this kernel compatible with nougat?
Click to expand...
Click to collapse
Nougat? No way. There is an old bs version working with nougat.
Bring back stock charging speed please