After i switched from miui 9 to pixel experience rom,
My phone was unrooted. I tried to root it again using super su and magisk, but it didn't work. Please help.?
Pranavsingal said:
After i switched from miui 9 to pixel experience rom,
My phone was unrooted. I tried to root it again using super su and magisk, but it didn't work. Please help.
Click to expand...
Click to collapse
SuperSU doesn't work anymore.
Update your recovery to one which is Treble compatible and use the latest beta version of Magisk.
It should all be explained in the Pixel Experience ROM thread
Can you give me the link to that thread.....
Try this recovery;it works for treble and non-treble roms so you wont bother changing recoveries again: (https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933)
And try this magisk for treble as well: (https://androidfilehost.com/?fid=890129502657597190)
Make a clean flash of your rom, first flash firmware if needed then rom then gapps. I would advice you to reboot after that setup your phone then reboot to recovery and flash magisk. Your choice good luck.
RapGodS said:
Try this recovery;it works for treble and non-treble roms so you wont bother changing recoveries again: (https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933)
And try this magisk for treble as well: (https://androidfilehost.com/?fid=890129502657597190)
Make a clean flash of your rom, first flash firmware if needed then rom then gapps. I would advice you to reboot after that setup your phone then reboot to recovery and flash magisk. Your choice good luck.
Click to expand...
Click to collapse
Thanks buddy...
Related
Hello,
I've always been in Lollipop builds of MIUI, but since there's MM based MIUI 8 now I want to jump on that. previously, I'd do things as follows,
1. Flash MIUI fastboot ROM.
2. If bootloader was locked unlock it using MiUnlock program.
3. Flash TWRP.
4. Boot TWRP.
5. Flash universal boot img patcher.
6. Flash SU.
7. Flash Xposed.
8. Boot the ROM for the first time.
The way I describe above works flawlessly with LL MIUI ROMs, but since I want to jump on the MM ones, I was wondering if the same could be done with the MM based ROM or if I need to change something. Previously on the leaked MM Rom I got problems with UBP and the rom became finicky to boot. It would boot once but a reboot gave bootloop.
Any kind user if you have any advice on having MM with root and xposed please share your knowledge on how I need to go about doing that.
Thanks in advance.
What rom did you have, global dev rom or stable rom? My case at first was on global dev rom(LL) and received an ota update, then I copied it to external sd card, flashed by alka twrp the rom, superSU and xposed-v86-sdk23-arm64-MIUI-edition-by-SolarWarez-20160710.zip in one single flashed with success.
Sent from my Redmi Note 3 using Tapatalk
timberwolf60 said:
What rom did you have, global dev rom or stable rom? My case at first was on global dev rom(LL) and received an ota update, then I copied it to external sd card, flashed by alka twrp the rom, superSU and xposed-v86-sdk23-arm64-MIUI-edition-by-SolarWarez-20160710.zip in one single flashed with success.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Previously I had to flash UBP to keep the recovery intact. Is that not necessary anymore? it was 6.7.21 leaked MARSHMALLOW. LL works fine.
Use lazyflasher for mm instead of ubp
otyg said:
Use lazyflasher for mm instead of ubp
Click to expand...
Click to collapse
can you give a link to lazflasher? Thank you.
Hey guys, I want to switch to LOS14.1 by TheStrix, because it is now stable and bug-free.
There are some other things i want to flash too, so I just wanted to clear things up a bit.
I want to flash radon kernel, Arise sound mod, and magisk, because apparently magisk will allow me to use banking apps.
From referring to other people on the forum, i have the following:
1)Flash CM14 Firmware
2)Flash ROM
3)Flash GAPPS
4)Flash Radon Kernel
5)Reboot and setup phone
6)Flash magisk
7)Enable hide root
8)Flash Arise sound mod with arise magisk compatibility module.
So I have some questions regarding this procedure.
Do I have to flash supersu before flashing Magisk?
Is it worth it to switch data and cache to F2FS?
Do I need to switch recoveries to do this?
Is this the right order to flash the ROM and accompanying zips?
I am using the snapdragon redmi note 3 with fpc fingerprint sensor.
I have an officially unlocked bootloader.
I am currently on RR_MM official.
I would test it out myself, but i'm in college, so i don't really have time to do that.
If anyone would share their experiences or give me some pointers, it would be much appreciated.
No you must switch to RR n
[email protected] said:
No you must switch to RR n
Click to expand...
Click to collapse
Why is it a must to switch to rr n over los?
I actually don't really mind using either ROM, but I wanted to test out LOS for a while.
No its laggy too much
what i just did in the beginning was to wipe everything except the external sd card.
i would suggest to run the rom the rom first time without new kernel. i just updated my RR Nougat to todays release and wanted to flash radon just ahead, had some errors in recovery doing so. did a reboot, new rom was there but no radon. again flashing within recovery and no problems. with arise i have no clue, i dont use it
Quote from the Radon kernel v4.3 changelog, applicable to your step 4, 5 and 6.
Umang96 said:
If your rom uses magisk root, then don't flash radon immediately after rom, first boot to system once.
Click to expand...
Click to collapse
Need help guys I can't install any rom on my poco f1 showing error code 7
Please help me guys as soon as possible
Please reply
Currently I am on twrp 3.2.3-2
Last rom i wiped from twrp that was miui 10 which I was updated from ota
dawoodrangrez said:
Need help guys I can't install any rom on my poco f1 showing error code 7
Please help me guys as soon as possible
Please reply
Currently I am on twrp 3.2.3-2
Last rom i wiped from twrp that was miui 10 which I was updated from ota
Click to expand...
Click to collapse
First flash new vendor mirror.akhilnarang.me/MIUI/beryllium/ latest atm is 9.4.25 i think. You should ofcourse clean wipe before doing the vendor. After flashing the vendor the rom should no longer give error 7
Thanks bro i will try
After flashing this can i flash miui 10 rom also??
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
I am not sure mate i only ever did custom roms on this device. Currently am on crdroid and it has been smooth so far.
Btw thanks for reply
Do u play pubg ?
how is pubg performance on that rom which you are using??
dawoodrangrez said:
Do u play pubg ?
how is pubg performance on that rom which you are using??
Click to expand...
Click to collapse
Personally i don't play pubg but some of the people in telegram group do so support is in the chat group if needed some seem to change kernel to gain some performance but i think it performs good enough unless you have touch issues that some fts users have
I would not recommend flashing miui through twrp as many have reported that it bricks the device or maybe they are just doing something wrong
Twrp is best for custom roms
Use mi flasher for flashing miui
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
You don't have to flash any vendor zip if you're going to flash MIUI 10. If you wish to flash MIUI 10 for example from en.miui.com the global MIUI 10 then you can just flash the MIUI zip following magisk if you wish to have root then just reboot. You will have to flash the vendor zip if you wish to flash custom rom as custom rom don't have vendor firmware in it. Flash vendor first then the custom rom zip following with gapps and mod optional.
And yeah, if you flash custom rom and then flash MIUI back you might get region locked where you cant change the region, but I've solved that by flashing cust.img from global image zip using fastboot, this is because the cust partition isn't installed properly. It's the best to flash using Mi Flash, but it will encrypt you device. Do it on your own risk, im just simply sharing from my experience and im not responsible if your device change to iOS.
dawoodrangrez said:
After flashing this can i flash miui 10 rom also??
Click to expand...
Click to collapse
Yes you can flash any Miui Rom via TWRP Download The Flashble Zip Not the Fastboot One.
But When You will flash Stock MiUi 10 Rom Via TWRP You will Loose All Of Your Data.
You Need to Flash DFE After Flashing Stock One.
If You want To Flash Custom Rom
Flash Vendor
Flash Rom and Gapps
If You Want To Root Flash Magisk.
And Then Any Custom Kernel.
Reboot to System.
Hello. I have already asked on Reddit and Quota but I have not received an answer. I have the original global MIUI 10.3.8 with official TWRP and root by Magisk. I received a notification on the device that an update to MIUI 11 is available. As for root, I didn't make any changes to the system. I only gave Administrator permissions for four applications. What do I have to do to install the official MIUI 11 update?
Just download the .zip of MiUI 11 and flash as usual. Dirty flash works, don't need to wipe anything. Magisk 20.0 is working, no Disable Force Encryption needed. I tested with the miui.eu ROM...
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
Just download the .zip of MiUI 11 and flash as usual. Dirty flash works, don't need to wipe anything. Magisk 20.0 is working, no Disable Force Encryption needed. I tested with the miui.eu ROM...
Click to expand...
Click to collapse
Thanks! I need Magisk uninstaller for something?
Desmowiecki said:
Thanks! I need Magisk uninstaller for something?
Click to expand...
Click to collapse
For upgrade no, you don't. Make sure you have the latest TWRP (3.3.0.0 or 3.2.3.2) as some people are having issues. I didn't tested on official Global zip, only with the miui.eu variant
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
For upgrade no, you don't. Make sure you have the latest TWRP (3.3.0.0 or 3.2.3.2) as some people are having issues. I didn't tested on official Global zip, only with the miui.eu variant
Click to expand...
Click to collapse
TWRP will stay? After uploading the rom do not restart the device and do a TWRP flash? I have 3.3.0.0. Another thing is that I use global ROM.
Desmowiecki said:
TWRP will stay? After uploading the rom do not restart the device and do a TWRP flash? I have 3.3.0.0. Another thing is that I use global ROM.
Click to expand...
Click to collapse
Do you have experience on flashing custom roms on TWRP?! Maybe you should do some reading first...
But it's just a matter of download the miui.eu version of MIUI 11 at https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/ and than install via TWRP. You'll need to download the Magisk TWRP Zip and install it as well.
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
Do you have experience on flashing custom roms on TWRP?! Maybe you should do some reading first...
But it's just a matter of download the miui.eu version of MIUI 11 at https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/ and than install via TWRP. You'll need to download the Magisk TWRP Zip and install it as well.
Click to expand...
Click to collapse
The last question. Install Magisk after starting a new rom or still being in TWRP?
Desmowiecki said:
The last question. Install Magisk after starting a new rom or still being in TWRP?
Click to expand...
Click to collapse
I installed right away before reboot and it worked... I had to download the APK of Magisk Manager myself after, it won't install for some reason
Sent from my POCOPHONE F1 using Tapatalk
Okay. Upgrade to MIUI 11 and everything works together with Magisk v20 and Manager App. Thank you for your help.
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
TheChadGamer said:
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
Click to expand...
Click to collapse
I've managed to un-brick my phone! Still found no way to install a custom ROM on it tho...
TheChadGamer said:
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
Click to expand...
Click to collapse
Is There Any Custom ROM for Samsung Galaxy J4?
YES!
Although, this is not specific Custom ROM for this device. This ROM is GSI (Generic System Image), and J4 is greatly support it! (Because it has Android Oreo out-of-box)
How to install it?
Easy, install TWRP from TwrpBuilder's Github, flash GSI Image as usual, flash magisk (if bootloop, flash this might help), and done!
Please note that this is GSI, bugs are widely open. But, as far as I use J4, the only bug I feel are Camera and MTP (fixed by using custom kernel)
Edit: For your TWRP, which version you install?
RedLine_27 said:
Is There Any Custom ROM for Samsung Galaxy J4?
YES!
Although, this is not specific Custom ROM for this device. This ROM is GSI (Generic System Image), and J4 is greatly support it! (Because it has Android Oreo out-of-box)
How to install it?
Easy, install TWRP from TwrpBuilder's Github, flash GSI Image as usual, flash magisk (if bootloop, flash this might help), and done!
Please note that this is GSI, bugs are widely open. But, as far as I use J4, the only bug I feel are Camera and MTP (fixed by using custom kernel)
Edit: For your TWRP, which version you install?
Click to expand...
Click to collapse
Thanks for the reply!
I recently discovered that my Samsung J4 is carrier locked so i don't think it is possible to flash a custom ROM in it...
I really tried many things since this post but in the end it would always get stuck in a boot loop and i would have to flash the official firmware in it to restore it.
What TWRP version did i use?
I honestly don't remember but it probably was a unofficial TWRP 3.2.3 or something similar, not sure if it was unofficial or not but it seemed to work...
Also, how would i go around getting a custom kernel to use on the device that would fix those problems?
Again, thanks for replying!
-TheChadGamer
TheChadGamer said:
Thanks for the reply!
I recently discovered that my Samsung J4 is carrier locked so i don't think it is possible to flash a custom ROM in it...
I really tried many things since this post but in the end it would always get stuck in a boot loop and i would have to flash the official firmware in it to restore it.
What TWRP version did i use?
I honestly don't remember but it probably was a unofficial TWRP 3.2.3 or something similar, not sure if it was unofficial or not but it seemed to work...
Also, how would i go around getting a custom kernel to use on the device that would fix those problems?
Again, thanks for replying!
-TheChadGamer
Click to expand...
Click to collapse
I use TWRP 3.2, and flashed MY builded custom kernel (Only for GSI!) https://forum.xda-developers.com/galaxy-j/development/kernel-redline-kernel-samsung-galaxy-j4-t4188199/
You need to update to Android 10 Stock then flash the A64 A/B GSI. And remember to flash dm verity disabler then flash Magisk. Magisk is important too.
For more info about this, feel free to join our telegram group : https://t.me/SamsungGalaxyJ4
In there we have detail instruction to flash GSI for J4. And other issue discussion
I can't write the steps here, because the steps is little complicated. Cheers!
Thank you for your help!
Soon i will be giving it another attempt then !
Sorry for taking so long, even the site had a upgrade!
I actually am using Linux now but i am dualbooting with Windows to be able to use Odin. I have just now entered the Telegram group,
NamaSayaHendra said:
In there we have detail instruction to flash GSI for J4.
Click to expand...
Click to collapse
Where can i find those instructions in the group? I have never used Telegram before so i don't know where to look for them