Hello everyone. My friend bought a Redmi Note 5 (Global version) and one day suddenly the camera interface as well as the photos taken went upside down. Even the auto rotation doesn't work. Is there any way to recalibrate the gyroscope sensor because we don't have an official xiaomi service center in my country and it needs to be sent abroad unless I find a solution.
Thanks in advance
Okay it turns out it needed to be dropped to the ground to get fixed. Just in case anyone has the same issue and calibration doesn't fix it.
r u joking?
or realy fix it?
AntwnhsAnt said:
Okay it turns out it needed to be dropped to the ground to get fixed. Just in case anyone has the same issue and calibration doesn't fix it.
Click to expand...
Click to collapse
r u joking?
or realy fix it?
soshyan said:
r u joking?
or realy fix it?
Click to expand...
Click to collapse
I'm being serious. It was fixed after a drop ?
AntwnhsAnt said:
I'm being serious. It was fixed after a drop ?
Click to expand...
Click to collapse
your problem was like me???
pls check this link
https://forum.xda-developers.com/redmi-note-5/help/compass-rotation-error-180-degrees-t3882823
Related
Hi, new SXU user here. Just noticed that letter Q on my keypad is not working when its in portrait mode. But its ok when my phone is in landscape mode. Tried flashing stock ics rom already but that didn't solve the problem. Is it a hardware problem already?
i dont think is a hardware problem because it is working in normal mode so you have a soft problem go with our phone tu a repair
already tried that but it didn't worked too, even flashing with custom roms didn't help :crying:
genro14 said:
already tried that but it didn't worked too, even flashing with custom roms didn't help :crying:
Click to expand...
Click to collapse
dial *#*#7378423#*#*
go to service tests
go to touchscreen
now draw anything and notice whether the area where q is present is still black or it has some lines on it
drsanket_xperia_u said:
dial *#*#7378423#*#*
go to service tests
go to touchscreen
now draw anything and notice whether the area where q is present is still black or it has some lines on it
Click to expand...
Click to collapse
did that aready and i noticed that i can't draw anylines on the letter where q is located on portrait mode. is that a hardware problem already?
i think is hardware problem
so the only solution for that is by replacing the lcd already? :crying:
Yup you are gonna have to replace the digitizer But dont worry, hardware damage like this is covered under warranty
thanks sir Min3r
by the way, i'm currently using your rom. and i think it is the best rom so far :good:
genro14 said:
thanks sir Min3r
by the way, i'm currently using your rom. and i think it is the best rom so far :good:
Click to expand...
Click to collapse
Hey mate, Thanks for using my rom Glad you like it And dont call me sir, Im just an 19 year old college student
Anyway, sorry about your misfortune.. Hope you get it fixed soon
Cheers
thanks
its not of a big deal for me though, just hoping that it can be fixed without replacing its digitizer
Xperience Lite V2.0 with Addons...
Min3r said:
Hey mate, Thanks for using my rom Glad you like it And dont call me sir, Im just an 19 year old college student
Anyway, sorry about your misfortune.. Hope you get it fixed soon
Cheers
Click to expand...
Click to collapse
Hey Min3r,
Me too using your ROM its a great development for our XU for the starting of new year...
Its gr8... :good:
Gr8 Thanx for it.. :highfive:
And yeah...waiting for a new version if...
Hi guys! I am facing a strange problem in my Qmobile A600 clone of mmx a116. Now matter on what menu or what screen i am the phone is by itself pressing the back button. Although i am not pressing it. Even if i goto reocovery its keep going back and back. Did someone experienced this problem before??? If yes then how to get rid of it!! any suggestions will be appreciated.
sorry for my bad english!
malick186 said:
Hi guys! I am facing a strange problem in my Qmobile A600 clone of mmx a116. Now matter on what menu or what screen i am the phone is by itself pressing the back button. Although i am not pressing it. Even if i goto reocovery its keep going back and back. Did someone experienced this problem before??? If yes then how to get rid of it!! any suggestions will be appreciated.
sorry for my bad english!
Click to expand...
Click to collapse
Its looking like a hardware problem rather than a software issue
thejoker said:
Its looking like a hardware problem rather than a software issue
Click to expand...
Click to collapse
But its not doing it all the time! sometime when i needed the phone most then this problem arises! :crying: Let see what other says about this problem! :crying:
malick186 said:
But its not doing it all the time! sometime when i needed the phone most then this problem arises! :crying: Let see what other says about this problem! :crying:
Click to expand...
Click to collapse
it s hardware prob 4 sure no doubt in it
it maybe som lose contact r something go to SC!!!!!!!!!!!
jayadu said:
it s hardware prob 4 sure no doubt in it
it maybe som lose contact r something go to SC!!!!!!!!!!!
Click to expand...
Click to collapse
They won't claim it! my warranty has expired! and they are charging too much and taking 10-15 working days for the fix! well i well touch the local market for the fix! Let see what they say and suggest me! thanks for the fast reply and suggestion! :good:
I am having the same problem and I had my digitizer changed from the local market a couple of weeks back. Did you find any solution?
After last official update (7.3.2.0) on Redmi Note 3 Snapdragon I got issue with vibration.
Button and keyboard vibration randomly stops working 5-10-15min and then works again.
Anybody else?
Nobody else have this issue after last update?
it can be an update issue?
I also face the same problem. How can we resolve this?
My mobile vibration gone completely please help me
Thanks
Issues with official updates, are better discussed in miui thread, I guess?
Think your problem is the same as mine. Motor stop working randomly and start doing is job again in the same way.
Thought was a software problem, realized is an hardware one since i noticed that, when he stop vibrating, if i shake the phone, hes starting again.
giulpip said:
Think your problem is the same as mine. Motor stop working randomly and start doing is job again in the same way.
Thought was a software problem, realized is an hardware one since i noticed that, when he stop vibrating, if i shake the phone, hes starting again.
Click to expand...
Click to collapse
Same problem with me, how you solve the problem?
ansariabdulla1994 said:
Same problem with me, how you solve the problem?
Click to expand...
Click to collapse
You can send your phone in a xiaomi center. I saw you are from india, so you should have no problem. I'm from italy, this means i've to sent it back to china and wait a life to get it back. This is why i didnt resolved the problem and i lost interess on it
Think i'm going to wait the expire of the warranty and try to fix it by my own: i saw some videos and already tried to open the device, it shouldn't be difficult
giulpip said:
You can send your phone in a xiaomi center. I saw you are from india, so you should have no problem. I'm from italy, this means i've to sent it back to china and wait a life to get it back. This is why i didnt resolved the problem and i lost interess on it
Think i'm going to wait the expire of the warranty and try to fix it by my own: i saw some videos and already tried to open the device, it shouldn't be difficult
Click to expand...
Click to collapse
I solved it myself ?
ansariabdulla1994 said:
I solved it myself
Click to expand...
Click to collapse
How? U changed the motor?
giulpip said:
How? U changed the motor?
Click to expand...
Click to collapse
No, the problem was because of loose connections so I reconnect the motor strip and also put a piece of paper inside the motor slot and tighten the motor. Now it is working fine.
ansariabdulla1994 said:
No, the problem was because of loose connections so I reconnect the motor strip and also put a piece of paper inside the motor slot and tighten the motor. Now it is working fine.
Click to expand...
Click to collapse
Smart move the piece of paper. I'll try it when I come back from holiday. I'll let you know.
giulpip said:
Smart move the piece of paper. I'll try it when I come back from holiday. I'll let you know.
Click to expand...
Click to collapse
Thanks
ansariabdulla1994 said:
Thanks
Click to expand...
Click to collapse
News? Still working with the paper? I appreciate if u post a pic of your work..thank youuu
Sent from my Redmi Note 3 using XDA Labs
giulpip said:
News? Still working with the paper? I appreciate if u post a pic of your work..thank youuu
Click to expand...
Click to collapse
Still working, but for sending a pic, i have to reopen the phone.
Will post the picture whenever a got the time to reopen the phone
ansariabdulla1994 said:
I solved it myself
Click to expand...
Click to collapse
I have same issue on my Mi4c. How have you solved it please?
xburda said:
I have same issue on my Mi4c. How have you solved it please?
Click to expand...
Click to collapse
I opened up my phone.
If you are not an advance user or don't have experience how to deal with phone hardware, I recommend you to go o service centre.
Otherwise you want to do yourself then first of all you have to check that if the motor is working or not. If the motor is working then you have to check the connection points the problem with me was because of loose connections and the motor was not tighten. Just check these points and you are good to go.
PS :- I always recommends to go to service centre because opening the phone voids the warranty
This is my situation.
(If the video doesnt work, follow the link https://youtu.be/bzCTTU_iF6w directly).
ansariabdulla1994 said:
I opened up my phone.
If you are not an advance user or don't have experience how to deal with phone hardware, I recommend you to go o service centre.
Otherwise you want to do yourself then first of all you have to check that if the motor is working or not. If the motor is working then you have to check the connection points the problem with me was because of loose connections and the motor was not tighten. Just check these points and you are good to go.
PS :- I always recommends to go to service centre because opening the phone voids the warranty
Click to expand...
Click to collapse
How to check if motor works?
My phone is making a clicky sounnd when i shake it
Hey guys, my Vince display broked and I change this for one that I buy on Gearbest, the quality is nice, same original, but a lot of ROMs doesnt work on this, the touch stop and a padlock appears on left side, this is a driver problem ? Has a solution for It ?
EDIT: The new display is a different version of novatek, i found a dev that make a functional kernel for this !!
?? I have a new screen for replacing my broken one that still works but after knowing that I'm going to wait a bit longer lol
Alucardkiller said:
Hey guys, my Vince display broked and I change this for one that I buy on Gearbest, the quality is nice, same original, but a lot of ROMs doesnt work on this, the touch stop and a padlock appears on left side, this is a driver problem ? Has a solution for It ?
Click to expand...
Click to collapse
No solution, sell the phone or buy an original display...
TioCareca said:
No solution, sell the phone or buy an original display...
Click to expand...
Click to collapse
flahing miui again solve the problem is'n it?
Fran Montero said:
flahing miui again solve the problem is'n it?
Click to expand...
Click to collapse
Well if he wants custom rom, it will not be solved by flashing miui...
Does anyone have this issue? This can affect in gaming... Like when I am using 4 finger claw in pubg. All most every time, i cant move my camera.
If anyone want to check this issue, download touch screen test app.. When u input 2 finger, the touch is solid...but when 3rd input comes... Its like fading away. Its like i am not touching it at all.
Anyone have any fix?? This is so problematic.
Please someone help....
Pronabesh said:
Please someone help....
Click to expand...
Click to collapse
i use claw method as well, and i can confirm that this issue doesnt happen to me.
Is it three finger screen capture problem it?
Hi there my friend.
I have the same problem with my POCO. In my previous cell phone, I played PUBG with triggers, but in this cell I can not move, aim and shoot at the same time. I think it's because of the same problem as the toch.
I did the same test with the program and there if you recognize all the touches of the screen in the same way.
frank461 said:
Hi there my friend.
I have the same problem with my POCO. In my previous cell phone, I played PUBG with triggers, but in this cell I can not move, aim and shoot at the same time. I think it's because of the same problem as the toch.
I did the same test with the program and there if you recognize all the touches of the screen in the same way.
Click to expand...
Click to collapse
Yeah u can see after 2 inputs on same times, third or fourth are fading away. Its really so annoying. Dont know how to fix
Rawwr said:
i use claw method as well, and i can confirm that this issue doesnt happen to me.
Click to expand...
Click to collapse
Can u test it with touch screen test app?? Try to put 3 finger same time and swipe...
Pronabesh said:
Can u test it with touch screen test app?? Try to put 3 finger same time and swipe...
Click to expand...
Click to collapse
working fine bro
Rawwr said:
working fine bro
Click to expand...
Click to collapse
Give me some proof...
Pronabesh said:
Give me some proof...
Click to expand...
Click to collapse
i dont need to show you proofs or anything, you asked something i tested and replied.
if you dont want to trust it, it's okay.
since it's your device that is having issues, i'm just gonna leave it upto you.
For me is become like this.3 finger swipe
Sent from my Poco F1 using Tapatalk
Pronabesh said:
Does anyone have this issue? This can affect in gaming... Like when I am using 4 finger claw in pubg. All most every time, i cant move my camera.
If anyone want to check this issue, download touch screen test app.. When u input 2 finger, the touch is solid...but when 3rd input comes... Its like fading away. Its like i am not touching it at all.
Anyone have any fix?? This is so problematic.
Click to expand...
Click to collapse
It's either ROM/kernel issue, mine was working perfectly with triggers in AICP but broke in MSM-Xtended, didn't work in most of the custom kernel, but it's working on canting kernel (if you okay to test yourself)
sd24sep said:
It's either ROM/kernel issue, mine was working perfectly with triggers in AICP but broke in MSM-Xtended, didn't work in most of the custom kernel, but it's working on canting kernel (if you okay to test yourself)
Click to expand...
Click to collapse
Whoa..ok... Btw i am using stable global miui. Also one of my frnd has same problem..and he is also using stable like me. Lets see what happens after changing rom