Related
hi can someone please help i tried to flash my xperia x10 mini and failed badly and now when i turn on my phone the logo screen comes up and then just stays on... ive left it for about 20 minutes but still nothing its like its bricked on the logo screen i can restart it but it just does the same again. Ive also tried taking the battery out putting it back in then using the update service to lock it in flash mode while i use binarys flash kit but that doesnt work either. Also the update service just says no software update is available it thinks i already have the latest one please help i will be truely greatful x
Edit :
Ive already tried SEUS, PC Companion, Binary's Flash Kit.
Ive already tried connecting it to the adb but cant get adb to recognise a connected device and all the drivers are installed.
i guess you have, but i've to ask, have you tried the repair option in SEUS/PC Companion?
yeh i have seus says i already have the latest software version installed and pc companion actually wants me to load my phone up to connect it :/ any ideas? x
me too!!
i had the same problem with you...
how to get shutdown this phone?
phone must be shutdown when i want to flashing from SEUS..
and i don't know how to shutdown this phone because the battery....
edit : just connect your phone and use restart (hold power button & middle button)
after reboot, press back button and you will connect with SEUS...
but, my phone already get latest update...and i can't flashing from SEUS...
sob..
ive been shutting down the phone by taking the back off and unscrewing the inside cover. Then you will see the battery cable where you can simply unplug it from the motherboard and then reinsert it.
Edit: I also have connected to SEUS but it says i already have the latest software
Ive taken it to a local phone repairs shop ive given up... they said it'll be fresh and working by tomorrow morning it cost me £20 but its just one of those things en it :/
hey guys
all you need is to follow the instructions on SEUS,
when it tells you that you have the latest software press repair.
and when it say that you should turn off your phone and then reconnect it while pressing the back buttom do the following:
1- connenct the phone to the computer
2- press the 3 buttoms (power + mid buttom + back buttom) then as your phone restarts and vibrate remove your fingers from the power and mid buttoms but maintain pressing on the vack buttom
i hope this will help
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
I'm not one to normally start new threads that already have similar posts but I personally cannot seem to find a solution. So heres my scenario:
I have a Sony Xperia Tablet Z SGP311 that I got right after launch. I flashed a custom rom, yada, yada, you know the deal. However, I flashed back to the stock rom and updated it to the latest sony firmware and was running that for the past month. Everything was going good until BAM, my tablet turns off. I thought it had died since I had been watching a video but I remembered it was at 96% when I started using it so I turned it back on and got the screen of the wrench and screwdriver and it would freeze and bootloop. I then used flashtool to flash back to 10.1.C.0.370 and it worked fine, i got it into flashmode and it flashed properly and the tablet worked for a few hours until BAM, back to the wrench and screwdriver bootloop. SO this time i flashed back to the same firmware and used companion to update it to the latest software and that failed and my tablet fails to boot. Not only that I cannot even get it to go into flash mode and here is what happens with various button combos:
Power Button - nothing
Power + volume up - white flash, then triple white flash
If i do power and volume up until the white flash and then move my finger to volume down the LED turns green but only if plugged in, however it doesn't put it into flashmode like it should.
Green light stays on after unplugging.
Red charge light comes on only after hours of being on the charger.
I've tried booting into flashmode, fastboot, just boot on, nothing works even though the LED's are doing SOMETHING. I havent changed what flasthool i've been using and the drivers were working before. I've tried restarting my computer, using different cables, different USB ports.
I am puzzeled on what i should do and wonder if my tablet is bricked, however, I heard that if the white LED comes on and flashes that something can be done about it, but i have no clue on where to go next.
ANY HELP WOULD BE GREATLY APPRECIATED THANKS!!
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Can you get to FastBoot Mode (With the phone off, plug it into the PC's USB port and immediately press & hold the UP volume key, the LED should go from Red to solid Blue.) If yes, Run Flashtool (installing it first, if necessary) and try to get to Flashmode (With the phone off, plug it into the PC's USB port and immediately press & hold the DOWN volume key, the LED should go from Red to off, but Flashtool will tell you that the phone is connected in FlashMode)
Have you flashed anything? The usual cause for the red flashing LED is by flashing a ROM or Kernel when you haven't unlocked the bootloader first.
OK, there are some ROMs and kernels which can be flashed on a locked bootloader.
Download an FTF for your phone from the FTF repository thread, and flash it using Flashtool.
Tunki said:
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Click to expand...
Click to collapse
Before flashing, have you tried charging the phone through your computer's USB? See if that works.
Hello brickers and others.
Maybe i found THE solution for a hard bricked M4.
I was messing up my phone after flashing roms over each other and wiping several things several times.
So i hard bricked my phone i think because this is what the phone did :
In the first period the phone was starting but shows only the Sony logo for about 30 seconds and then the phone restarted automatically, and so on. That means i was in a boot loop.
I didn't came in to TWRP recovery mode. That did not working anymore
Pressing volume down button and connect to pc for Flashmode did not working too. I came into Flashmode and my pc whas finding the M4 but after 20 seconds or so the phone was rebooting by himself. Thus Flashmode was unuseable.
The volume up button for Fastboot mode was working very well.
Only, my point is i can't flash a firmware via Fastboot. I don't have enough experience that way, if it is possible at all. I don't know.
Okay, i was stuck at that point.
After flashing as a dumbass some kernels via Fastboot mode i came in the second period, a hard brick i think.
The only thing what my phone did now was going on for a few seconds (showing Sony logo) after a long press on the power button, and then it turns off.
TWRP recovery was also that time not working.
My phone was not showing the led when he turns on that few seconds.. I didn't came in Fastboot or Flash mode anymore (no led showing up). Nothing was working anymore except that the phone turns on for a few seconds after a long press on the power button.
THE SOLUTION
I hope for every M4 users i found the solution for this brick. I don't know if it is mentioned yet somewhere. I didn't find it. It feels like a secret combination but it worked for my M4 E2303.
"Press the volume up & volume down button at the same time and keep it pressed. Then press the power button and keep all these 3 buttons pressed, LONG pressed, TILL the following vibrating code has COMPLETED!!!"
Code: rrrrr rrr rrr rrr
Now you can release the buttons and Fastboot & Flash mode should work fine now. You can use Flashtool now to flash a STOCK firmware (tft file) via Flashmode.
After completing your phone is repaired.
Succes.
Greetz Yur.
Anonymous01111289 said:
Hello brickers and others.
Maybe i found THE solution for a hard bricked M4.
I was messing up my phone after flashing roms over each other and wiping several things several times.
So i hard bricked my phone i think because this is what the phone did :
In the first period the phone was starting but shows only the Sony logo for about 30 seconds and then the phone restarted automatically, and so on. That means i was in a boot loop.
I didn't came in to TWRP recovery mode. That did not working anymore
Pressing volume down button and connect to pc for Flashmode did not working too. I came into Flashmode and my pc whas finding the M4 but after 20 seconds or so the phone was rebooting by himself. Thus Flashmode was unuseable.
The volume up button for Fastboot mode was working very well.
Only, my point is i can't flash a firmware via Fastboot. I don't have enough experience that way, if it is possible at all. I don't know.
Okay, i was stuck at that point.
After flashing as a dumbass some kernels via Fastboot mode i came in the second period, a hard brick i think.
The only thing what my phone did now was going on for a few seconds (showing Sony logo) after a long press on the power button, and then it turns off.
TWRP recovery was also that time not working.
My phone was not showing the led when he turns on that few seconds.. I didn't came in Fastboot or Flash mode anymore (no led showing up). Nothing was working anymore except that the phone turns on for a few seconds after a long press on the power button.
THE SOLUTION
I hope for every M4 users i found the solution for this brick. I don't know if it is mentioned yet somewhere. I didn't find it. It feels like a secret combination but it worked for my M4 E2303.
"Press the volume up & volume down button at the same time and keep it pressed. Then press the power button and keep all these 3 buttons pressed, LONG pressed, TILL the following vibrating code has COMPLETED!!!"
Code: rrrrr rrr rrr rrr
Now you can release the buttons and Fastboot & Flash mode should work fine now. You can use Flashtool now to flash a STOCK firmware (tft file) via Flashmode.
After completing your phone is repaired.
Succes.
Greetz Yur.
Click to expand...
Click to collapse
Hello there Sir, a very big THANK YOU for this..I tried this for my cousins xperia m4 aqua and its working..I have successfully flash stock rom again in his phone..thanks for sharing again.. :highfive::good:
Thanks for replying that it have worked for you.
i'm not found code vibrator : rrrrr rrr rrr rrr, but i'm found code vibrator : rrrrrrrrrrrrrr. why i'm can't found it
Well,what you did was just shutting down the phone. I think your flashmode didnt worked because you hadnt the divers installed
MY issue is same but different as i can go into recovery and flash mode too i flashed the stock firmware also but its booted once properly but no wifi and nothing and all of sudden its restart automatucally and stuck there at sony logo rebooted again and then sony logo.... i think mine is bricked permanently
Mine doesnt even vibrates... Any clue?
Hyoni said:
Mine doesnt even vibrates... Any clue?
Click to expand...
Click to collapse
same here
Mine vibrates, once and then thrice and all that stuff, but flashtool isn't working anyway. Any solution?