Hey guys,
Newbie here. I am very excited about my new yet to be received phone - X829 using EUI 5.8.016S (Stable).
I care about call quality, camera quality, sound quality using the CDLA technology headphones (in this order).
I don't consider myself a heavy user - I talk maybe 30 mins per day maximum, light web browsing, no gaming...
Should I stick to the stock rom supplied EUI 5.8.016S or is it worth upgrading to something else? Like, will a custom ROM yield better call quality, camera quality and sound quality than the stock rom?
Thanks!
Andrei
Hi, i am also a X829 user and i would suggest you to try recently released EUI 6.0.030s, which has great battery life and network receiving, of course quite stable.Camera quality is also good.
This one is the same rom modified by CrisBallGreece that includes system adblocker by default and preinstalled magisk manager, removed unnecessary leeco apps and chinese garbage apps.
Here is the link:https://drive.google.com/file/d/17dVqqd_kRZol6ORhvs_Ubri7xNldRLvw/view
Google apps : https://drive.google.com/file/d/1bcmKY1yaoVAnLViL0aSabAdpjK6jpn9x/view
Hi,
Thanks for the reply. How do I get the 'cleaned-up' version installed? Not familiar with either super su or magisk. What is the easiest way to go about doing this? The threads I found make reference to super su but can't download it from the official website. Sorry if this was already addressed in a different thread...
Thanks a lot!
Follow this link :
https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
First of all, you should unlock your bootloader and flash twrp (a custom recovery mode, allows you flash rom).
Download rom and gapps then put them to your device, backup your data.Reboot to recovery mode.Press wipe - wipe data, go back and press install - find the rom you copied and flash it.Once the phone booted, go back to recovery and flash gapps in the same way then reboot.That's it.
This is the only way to flash any type of rom.
Btw, magisk is a root manager like the supersu, gives you root access of the system.
Hi,
Thanks for the very informative post. I got my phone yesterday and started to play with it As expected, I had some hard time installing the EUI 6 CBG version. I think it's because I installed a very recent (if not the most recent) version of TWRP...From memory, the one I installed is 3.2.2...Anyhow, EUI seemed to install fine and I got the success message displayed in TWRP along with the note 'phone will reboot in 5 seconds' or something like that - which never happened.
I then installed Lineage OS 15 Oreo because I didn't know how to downgrade TWRP.
So do you think that the problem I had was because of the TWRP version I used? how does one downgrade that?
Also, I installed the Gapps (https://forum.xda-developers.com/le...x-lineageos-15-1-oreo-leeco-le-max-2-t3771577) but Google services gives an error message...'Google stopped working'. Is there a workaround for that?
Thanks!
Andrei
Hi mate,
Right after that " phone will reboot ..." note, you should have rebooted the device by pressing and holding the power button for 8-9 secs and it would be fine.
No, latest twrp version works fine and is compatible with this firmware.
Hmm, you can try to delete the app data of google play services.Have you flashed the los 15 with full wipe ?
Btw los 15 is not mature enough.It still has some battery consumption problems and the battery life lasts not as long as EUI's. + I don't know if it has CDLA sound mod but it doesn't contain dolby digital sound.
Hi,
I believe I did a full wipe (dalvik, cache, system, data).
I will try again to flash EUI 6 by CBG tonight.
The workaround for gapps was to flash them at the same time with LOS 15. Previously I flashed LOS 15, rebooted into the system, went back to recovery twrp and then flashed the gapps.
Thanks!
Yeah, flashing the gapps with rom in a row is not a workaround, its a must-to-do.Unfortunately i forgot to mention this to you.Apologises..
Great, thanks a lot! it worked. I'm getting used to it right now. Will play with this ROM for a couple of weeks and then try something else...I was thinking SLIM7...any thoughts on it? have you tried it? any red flags?
Thanks!
I am also thinking to move that rom, but later.Well its the final version so no bugs.But i don't know if it supports cdla sound mod, do you know ?
Drollach Gûntar said:
I am also thinking to move that rom, but later.Well its the final version so no bugs.But i don't know if it supports cdla sound mod, do you know ?
Click to expand...
Click to collapse
Not sure if it supports CDLA...I tried this rom briefly the other day and I had a hard time with the camera...battery seemed to deplete quite fast, but I'm sure it can improved with different settings, greenify, etc...try it and let me know if you like it.
Which other roms have you tried?
Thanks!
Most non-eui roms will have slightly worse battery life making greenify an absolute must.
But if you want a non-eui rom (like me, I just hate eui) I recommend lineage 15.1 or du12 by infrag(my current rom).
Hi man, after a long time, I had a change to try different rom, named mokee 7.1.2 (nougat).Well, it's not bad, performance is excellent, not a single lag at all. Also the battery backup is good, not perfect as EUI but acceptable.
Pros of this rom are, it's being updated in a nightly period and Android security patch is dated as august 5 2018 !
You may check it out if you are interested..
Regards.
I am also on DU12 thinking to try 1 of Android P roms, is it time or to wait ?
Milanche78 said:
I am also on DU12 thinking to try 1 of Android P roms, is it time or to wait ?
Click to expand...
Click to collapse
Try Aex Treble Pie, you will be satisfied.
Related
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2
This ROM is Going to be Primary Based on LineageOS 15.0 source or ROM compiled with Base as LineagesOS 15.0
I am going to regularly compile it and going to share it with community over here
Features of This ROM Based on LineagesOs 15.0
Customizable Theme Engine (Blend with Substratum)
Picture in Picture Mode of Android Oreo
Notification Dots
New user interface in Settings
Split Screen
Improved battery life
Notification Snoozing
Android Oreo Navbar
New UI in Status Bar and Quick Tiles
New Emojis based on Android Oreo
And much more.
Download
For Nexus 6 Android file Host
Gapps For Oreo
Opengapps You can get that from Oppengapps.org
Gaapps For 8.1 Till Open gapps start official Build
The Build is from @Nezorflame And Gapps downlod from
Do NOT expect daily builds. I'll build when I'm free.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If you see a NOOB question and you don't feel like replying, DON'T, just ignore that post. If you do reply, good for you.....and be nice in your reply.
1st Time Installing
You Need To have Rooted and Custom Recovery Installed Phone To Use This ROM
If you are New Just Go To This Thread and Download Wug's Nexus Tool Kit And Follow Instructions.
Once Custom Recovery Installed. TWRP 3.1.x recommended
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
Install Modem/Firmware Update
Install the update zip from recovery
Install Gapps
flash Magisk14.1 or 14.0 .zip
Reboot
Already Using the Previous Version of Same ROM
Download the zip
Install latest zip from recovery
wipe Cache
Reflash Gapps
Flash Magisk
Reboot
Credits:
LineagesOs team
CRdroid Team
ScottHeart BTi
He][razor
Vortex 1969
neobuddy89
XDA Developers community
The users and all developer of XDA who has helped me direct or indirect way
Google for Android.
If I miss someone Here please point it out to me.
Source
https://github.com/LineageOS/
https://github.com/crdroidandroid
XDA:DevDB Information
SourceBuilt ROM for Nexus 6, ROM for the Nexus 6
Contributors
chineel, chineel
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Beta
Created 2017-10-28
Last Updated 2017-10-28
Hi everyone The ROM Upload is still On
I have two build Ready One is LineagesOs unofficial and second One CrDroid4.0 which is also based on LineageOs 15.0
Both Got Uploaded
first is Crdroid
crDroidAndroid-8.0-20171028-shamu-v4.0.zip
Second One is LineagesOs-15.0
lineage-15.0-20171028-UNOFFICIAL-shamu.zip
Both Rom are unofficial nothing official about it.
For best error free opration you need to have it Clean Installed
means
Factory reset
wipe
System, Cache,
Flash ROM
Flash Gapps
Flash Magisk / Super Su for rooting
Wait for a while
let it get settled
Enjoy the New Oreo 8.0
11/07 Build Onwards forced encryption is removed so your data by default is not encrypted anymore.
For all those having trouble booting should follow below steps.
get ADB fastboot installer from here
Take back up of everything including DCIM and TWRP or TITANIUM or SMS contact backup or any other.
reboot to bootloader.
open command prompt.
fastboot format userdata (This will format everything on internal storage and will recreate data partition)
wait till success message.
reboot to recovery
wipe system cache data (if you like to but not needed this time)
flash ROM
Flash Gapps of your choice.
wipe dalvick and cache
Reboot
wait for a while
let your phone settle for some time.
reboot to recovery again
flash magisk
reboot
Enjoy your phone unencrypted and fresh as new. Connect to pc copy back your data
restore back whatever you want to restore enjoy.
3rd one
i may Need this one also
Great work! Had any issues with random reboots?
rebel1699 said:
Great work! Had any issues with random reboots?
Click to expand...
Click to collapse
No No reboot since yesterday on my phone
chineel said:
No No reboot since yesterday on my phone
Click to expand...
Click to collapse
Good deal. Will install in the morning and test it out. Again, great work to help keep shamu alive
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
gr3ud said:
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
Click to expand...
Click to collapse
I am going to request for that if I can continue compiling this ROM but till then Unofficial only
Downloading now. Pretty excited since I'm currently running crdroid.
Do you keep a changelog you're willing to share?
Schiben said:
Do you keep a changelog you're willing to share?
Click to expand...
Click to collapse
For CRdroid already in ROM About section attached here also
Lineageos changelog https://www.lineageoslog.com/15.0
Thank you very much for your great work ? I like this rom
I will try LOS version tonight. Any known bluetooth or Mobile data issues so far ?
Thanks for the effort and appreciate the continued update for Nexus 6.
Hi, I appreciate the effort. Mind telling us the differences between ROMs though? Does the CR one have more features than the stock based Lin one? Still going to test them both but was just wondering, thanks.
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
newsguy99 said:
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
Click to expand...
Click to collapse
Mobile data can be stopped from developer options and untick mobile data always on
steps
1 Open about Phone
2 Go to build number
3 Tap continuous till you got message you are now developer.
4 Tape on Back button
5 You will be seeing Developer options now
6 scroll down till you see mobile data always on toggle it off
Bluetooth issue was found for me when connected to my head unit in my truck. It connects, blurps sound out for half a second and then nothing the songs/videos(videos also go down to like 2 fps while paired) are still playing during but no audio. It's late I just got home will try to capture a log tomorrow. Other than that this rom is butter smooth, thanks for your hard work keeping our old whale swimming. Plz remove if it needs to be I won't be butthurt about it.
Xd great work!
Hi to everyone here... Finally a MoKee ROM is relased for Xiaomi Mi 9 SE (grus) devices!
Developer: subdragonzj
This thread will be unofficial for testing of a AOSP-MoKee ROM builded from the source...
(and ROM based on MoKee with some mods builded by myself)
Stay tuned
I have to say that I was pleasantly surprised by this ROM. It doesn't have the existential issues of PE, so it has all those little useful features out of the box (instant face unlock, double tap to sleep on the lockscreen, etc.). It's not XenonHD based, so no freezing incoming calls. Performance is good (closer to xiaomi.eu). Fingerprint scanner is reasonably fast (I say reasonably because xiaomi.eu is always two steps ahead, in this department). And battery life is also optimized to best levels.
I had issues completing Google setup and with wifi, but I have to be honest: I installed the ROM on top of the latest xiaomi.eu (without sound issues, by the way). Now I have 10.3.4 eea vendor. Let's see how it performs on everyday tasks.
PS - Also, I didn't like the ads on MoKee Center, but Adway takes care of that, of course. I have several paid apps from Play Store, so if the ROM is really good, I have no problems with donation for some extra features.
Can you tell us which steps you made to install mokee properly?
Cheers
Gesendet von meinem MI 9 SE mit Tapatalk
Install Vendor 10.3.3 Global or 10.3.4 EEA via fastboot
Reboot to recovery and install ROM
Do a factory reset (or format Data)
Reboot to system and do initial setup
Reboot to recovery and install Pico GAPPS + faceunlock.zip
Reboot to recovery and install Magisk
Reboot to system and finish setup.
This works for me.
Ultrawide camera is having same problems that XenonHD had (https://forum.xda-developers.com/mi...xenonhd-9-0-experimental-15-08-t3957888/page5). Can you fix this? Probably Okita kernel will fix it, but I would like to keep this kernel for now, seems very optimized for battery.
elpaablo said:
Ultrawide camera is having same problems that XenonHD had (https://forum.xda-developers.com/mi...xenonhd-9-0-experimental-15-08-t3957888/page5). Can you fix this? Probably Okita kernel will fix it, but I would like to keep this kernel for now, seems very optimized for battery.
Click to expand...
Click to collapse
Ultra-wide camera is broken due to missing some nodes at the kernel dtsi on Xiaomi side (their kernel source is too much broken stuff, even for MIUI itself, which is funny).
And because MoKee dev uses Xiaomi kernel source with little modification, so it's pretty much expected.
And because MoKee dev uses Xiaomi kernel source with little modification, so it's pretty much expected.[/QUOTE]
does it support camera 2 API full
I'm using this ROM for now because it's more optimized than PE. Apart from color profiles that don't stick in any AOSP ROM and a dark theme with white notifications, everything else (except camera, as posted above) is working fine. Fingerprint scanner is reliable (although still a little slow), face unlock is instant and the only issue that needs to be solved asap is ultra wide lens not working. A custom kernel can deal with that, but the stock kernel performs better with this ROM. So, I think I'll wait for a fix or other ROM development.
Anyone getting this on any of your AOSP ROMs?
Been using for 3 days now, and by far it gives the ideal battery performance. Tried crDroid and although there were some improvements, couldn't last a day with barely 20% and high idle drain.
Will be staying with this ROM as everything that I expect from this device is provided for. Personally, no battery means no phone for me, so that's my baseline. Thanks to the other developers for their hard work and free time!
elpaablo said:
Anyone getting this on any of your AOSP ROMs?
Click to expand...
Click to collapse
For now, custom AOSP ROM have 177k-184k antutu score, and it's normal.
you can't expect it to be as close as miui (which can go between 185k-195k).
besides, antutu doesn't represent the true performance since anyone can hack it just like huawei before.
btw, this is from some unreleased custom rom that I use right now, no kernel mod, no nothing. typical custom aosp's score
Yes, but generally it gives you the right idea. The ROM is very fluid. I've installed all my stuff and it remains fluid. In fact, I think the latest nightly update has improved user experience.
Then comes maintenance and that's what worries me the most. We see ROMs (XenonHD and PE) that freeze on incoming calls. This is not just a little bug, it's a massive bug. It basically disables your phone. And it's not been solved yet? crDroid developer seems to think that SIM management is not important in a dual SIM phone. Instead, he tries to make fingerprint scanner work 0.1 seconds faster. Yes, camera is not fully working on MoKee and I really hope that this issue is solved, but at least I can receive calls and enable my data SIM card only when I use it, which saves a lot of battery.
---------- Post added at 05:57 AM ---------- Previous post was at 05:36 AM ----------
I installed latest xiaomi.eu version last week and it's way ahead in every aspect, except 2: MIUI (sucks) and SIM management. AOSP ROMs (except crDroid) handle SIM management in a much better (easier) way.
elpaablo said:
Install Vendor 10.3.3 Global or 10.3.4 EEA via fastboot
Reboot to recovery and install ROM
Do a factory reset (or format Data)
Reboot to system and do initial setup
Reboot to recovery and install Pico GAPPS + faceunlock.zip
Reboot to recovery and install Magisk
Reboot to system and finish setup.
This works for me.
Click to expand...
Click to collapse
Sorry for picking this up again, i´d like to give mokee a try.
which faceunlock.zip did you use?
https://forum.xda-developers.com/android/software-hacking/mod-fix-gapps-unlock-t3863509 The one from this thread?
Thank you, Cheers.
Sooo now i´m stuck on fastboot.
Tried flashing vbmeta using fastboot with "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img", but it just says "fastboot.exe: unknown option -- disable-verity"
Any ideas?
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
It's the exact phrase I copy/paste.
Maybe you added a space somewhere?
If you're using power shell type cmd first.
Face unlock: https://androidfilehost.com/?fid=11410963190603910002
i used copy/paste too.. i´ve attached a screenshot.
That´s really annyoing atm..
Type cmd or just use cmd instead of PowerShell.
Yes you should always use cmd in administrator mode in the same folder than vbmeta.img
well... can u tell me what i´m doing wrong here again?
Sorry for the circumstances guys..
Cheers
Humpfrey said:
well... can u tell me what i´m doing wrong here again?
Sorry for the circumstances guys..
Cheers
Click to expand...
Click to collapse
Can you tell us where is located fastboot and vbmeta.img on your pc?
For instance, i have all my files in c:\Android
So I launch the cmd directly in that folder.
Started by DL https://androidfilehost.com/?fid=962187416754459552
Copied on C drive and renamed into Android
Then I copy my files on it, and right click/launch as admin on "cmd-here".
So, I install lineage os every one's and a while to test it and see if it is ok for me, I always revert to stock but that's not the point, one problem that I have is that the phone gets VERY HOT. One day I installed lineage and when I finished the setup process, the phone was so hot I couldn't hold it comfortably, while when I finish the setup on the stock rom the phone is just warm. Is there any way to make the phone run cooler? Is the phone getting hot because the software is too much for the processor? . I haven't installed lineage os for about two months now so I may try it again at some point. Is anyone else having the same problem?
No that's not normal, it's not supposed to heat up much.
Maybe you you didnt flash it properly, it's recommended to install it like this.
forum.xda-developers.com/lg-g5/development/rom-unofficial-lineageos-17-1-g5-t4039807/post81972297#post81972297
Also check before flashing if your camera works on the stock lg rom,
If it doesnt you have to downgrade to stock marshmellow, and then upgrade back to oreo to fix it.
dylank said:
No that's not normal, it's not supposed to heat up much.
Maybe you you didnt flash it properly, it's recommended to install it like this.
forum.xda-developers.com/lg-g5/development/rom-unofficial-lineageos-17-1-g5-t4039807/post81972297#post81972297
Also check before flashing if your camera works on the stock lg rom,
If it doesnt you have to downgrade to stock marshmellow, and then upgrade back to oreo to fix it.
Click to expand...
Click to collapse
Thanks for answering,
This is how I install it. The camera on stock oreo is working normally so I don't need to install stock Marshmallow. So, I firstly unlock the bootloader and then install lineage os 15.1 with no gapps. After that I upgrade to lineage os 16.1 again with no gapps. Now I uninstall lineage 16.1 and I am doing a clean install of official lineage os 17.1 WITH gapps. The reason I do this is because if I install lineage 17.1 instantly the cameras and sensors don't work. Unfortunately I don't remember the temperatures that I got but I remember that one day I woke up with 20 C and after 15 minutes of some web browsing and social media it went up to 40 C (there's a slight chance that I'm wrong since I don't remember the exact temperatures as I said)
Strange i didn't have those problems when flashing properly,
Do you also use nano/pico opengapps?
You could also give crDroid Android 5.12, a try maybe that will work well, but it's android 9 instead of 10.
I think you need to flash it in the same way as lineage.
dylank said:
Strange i didn't have those problems when flashing properly,
Do you also use nano/pico opengapps?
You could also give crDroid Android 5.12, a try maybe that will work well, but it's android 9 instead of 10.
I think you need to flash it in the same way as lineage.
Click to expand...
Click to collapse
I originally used nano opengapps but I started using stock because I use most of the gapps anyway but I will try crdroid 5.12 at some point to see what happens.
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
Click to expand...
Click to collapse
YES! Thank you very much for supporting this tablet!
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
IMO this is a necessity as there are literally no good roms for this right now. I tried the port of the Nexus stock CR rom and it was not great. Playstore was unusable due to an issue were the app thinks the system is out of storage space, even though it is almost empty. Chrome crashes instantly, the search on the page home screen flickers up/down without control.
I am a far bigger fan of LineageOS thus why I am working on this build.
More to come.
Click to expand...
Click to collapse
As a follow up to my original post I wanted to mention that for anyone who wants a new ROM on their SM-T290 until this is finished development, use the Nexus Rom by Magendanz. I was able to do a fresh stock firmware install and retry the rom and my opinion has changed. I have noticed that these Tab A 8.0 tablets have been used a lot for like Uber/Door Dash and other POS terminals. I am pretty sure a lot of them have modified or customized firmware for these reasons and when I mine second hand it was from a pizza store. I think that messed up the upgrade.
Overall Magendanz did a great job, when you install it properly. I have zero issues with functionality now, TWRP recovery set up, as well as Magisk installed and everything is running extremely well.
As far as instruction on how to install. Take a look at some of the comments further down on the Nexus thread. That is what I did this time around and it worked perfectly. Last thing I did was copy Magisk.Apk to my SD, change extension from .APK to .ZIP, then boot into TWRP and install that ZIP.
Going to update progression on a monthly basis as far as the LineageOS 18.0 build
SniperFox22 said:
Build in the works. Going to release the BETA as soon as I can do testing on my own device before release.
Click to expand...
Click to collapse
Do you have a github with your source code and manifest? I just got this tablet (used) yesterday and I would like to see if I can help. I have built LineageOS roms for a number of older Samsung Tab A devices, but will have to do some research on the "new to me" T290. Thanks.
Just got this tablet, how's the beta coming along? And what can I do to help?
Thank you my guy I had lost all hope for custom roms on this tablet. It's quite relieving to know that I'm not alone.
Also, has anyone experienced severe lag on one ui 3 while doing basic tasks? The thing literally gets 5 fps while watching youtube and surfing the web but it plays 3d games at 20 fps on low settings. wtf
HaveSomeRubicon said:
Thank you my guy I had lost all hope for custom roms on this tablet. It's quite relieving to know that I'm not alone.
Click to expand...
Click to collapse
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
As per the Nexus Post;
Unlock Bootloader
flash TWRP
Wipe data
Install Andy Yan's Lineage OS 19 GSI
Andy Yan's personal builds // GSI - Browse /lineage-19.x at SourceForge.net
sourceforge.net
Install Magisk
Reboot
Cheers!
SniperFox
SniperFox22 said:
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
...
SniperFox
Click to expand...
Click to collapse
Good advice But which of Andy's GSIs did you use exactly ?
Thanks so much dude
The GSI is a .img.xz will it work or does it need to be .gsi
HaveSomeRubicon said:
The GSI is a .img.xz will it work or does it need to be .gsi
Click to expand...
Click to collapse
You download the .img.xz file and unzip it.
Inside this will be the .img file
This is what you need to flash (.img)
2faraway2 said:
Good advice But which of Andy's GSIs did you use exactly ?
Click to expand...
Click to collapse
Sorry
Use this one
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS.img.xz
It has Gapps built in as well as super user through SSH, dont install Magisk as it will error that there is already SU tool installed.
@SniperFox22 , did you make a github for the code or didn't even start since you are happy with GSI?
SniperFox22 said:
You download the .img.xz file and unzip it.
Inside this will be the .img file
This is what you need to flash (.img)
Sorry
Use this one
lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bgS.img.xz
It has Gapps built in as well as super user through SSH, dont install Magisk as it will error that there is already SU tool installed.
Click to expand...
Click to collapse
My OS didn't have an option to unzip it at first glance. I haven't been able to install gapps so I'm gonna try that gsi. Also, am I supposed to wipe internal storage before flashing or not?
I got it working but games just crash which is worse than before
Came across this while trying to root my sm-t290. Just want to add that Andy Yan has upgraded to a 19.1 version that appears to work just fine. Flashed to system partition using twrp after I had flashed the Nexus rom. Wifi works, sound works, sd card, bluetooth keyboard works just fine.
SunSlide said:
Came across this while trying to root my sm-t290. Just want to add that Andy Yan has upgraded to a 19.1 version that appears to work just fine. Flashed to system partition using twrp after I had flashed the Nexus rom. Wifi works, sound works, sd card, bluetooth keyboard works just fine.
Click to expand...
Click to collapse
Link to it???
I like the link above because it has all the versions but lineage-19.1-20220320-UNOFFICIAL-arm64_bgS.img.xz is the one that I used. The page has the naming convention. Ill mention that even though it says that it's supposed to be rooted, I couldn't get it to work right. The nexus rom had an option in the 'phh treble' menu to activate root and this lineage image should also but the option wasn't there. It kept saying the supersu binary was busy but that was after I flashed a supersu.zip(it may have worked before then i don't know). I played with it a little bit but ended up just flashing back to the Nexus rom.
Hey guys!
Installed "lineage-19.1-20220320-UNOFFICIAL-arm64_bgS.img"
Everything starts up, but something is weird with my installation and my storage, it freezes when i go into storage and i cant download anything without apps start to crash.
Im not sure if i flashed it correctly, i did a wipe in TWRP before installation.
Really hope i can get this to work since it waaaaay faster then the bloat samsung ships
Edit:
Tried flashing another rom (nexus) and had the same issue!
trying to reflash and wipe everything except internal storage.
Where should i flash image? i get: "select partition to flash image", never seen that before (might be because you flash img and not zip)
SniperFox22 said:
Hey Guys,
I didnt end up building a custom rom, because I was able to get the GSI version of Lineage 19 working fairly easily. Just use the correct image and flash the same as the Nexus post. Android 12 with Lineage 19 so i felt it wasnt worth it as everything works. I had trouble at first with a boot loop but that was because I had installed Magisk BEFORE the GSI rom and not AFTER. So dont make my mistake.
As per the Nexus Post;
Unlock Bootloader
flash TWRP
Wipe data
Install Andy Yan's Lineage OS 19 GSI
Andy Yan's personal builds // GSI - Browse /lineage-19.x at SourceForge.net
sourceforge.net
Install Magisk
Reboot
Cheers!
SniperFox
Click to expand...
Click to collapse
Hi Sniperfox,
could you please provide a link to the correct Nexus post, I would like to make sure i follow the correct one as I have a tab A (2019) and want to nstall lineage.
thanks in advance
rgds Acsum