After failing the Debrand following method [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei by @somboons i'm asking some help or guidance regarding to fix this asap since this is my main phone
This was a C02B131 to C432B161 process
I'll explain (like i did in original thread [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei):
Quoted:
"Hello,
My Huawei Update Extractor doesnt show P9 Plus in profile. Even if i choose "Unknown" the VERLIST.img code i get is VIE_C900B00 but i'm using C432B161 ROM, is this normal?
So here's the current situation:
Before this procedure i had already the C432B161 inside sccard dload folder.
After the OEMINFO part when phone restarted the normal orange text saying it was unlcked and might be untrustable were in RED and phone started like encripted - i coulndt to a thing but insert the encrypt code so >
> i restarted phone with vol down + power combo key thinking of TWRP but... wrong combo and phone started update the ROM i had already in DLOAD.
> All went OK (surprisly) and everything is working fine but the OTA.
> I moved sucessefull from C02B131 to C432B161 but no OTA"
Thanks!
migueli2 said:
After failing the Debrand following method [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei by @somboons i'm asking some help or guidance regarding to fix this asap since this is my main phone
This was a C02B131 to C432B161 process
I'll explain (like i did in original thread [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei):
Quoted:
"Hello,
My Huawei Update Extractor doesnt show P9 Plus in profile. Even if i choose "Unknown" the VERLIST.img code i get is VIE_C900B00 but i'm using C432B161 ROM, is this normal?
So here's the current situation:
Before this procedure i had already the C432B161 inside sccard dload folder.
After the OEMINFO part when phone restarted the normal orange text saying it was unlcked and might be untrustable were in RED and phone started like encripted - i coulndt to a thing but insert the encrypt code so >
> i restarted phone with vol down + power combo key thinking of TWRP but... wrong combo and phone started update the ROM i had already in DLOAD.
> All went OK (surprisly) and everything is working fine but the OTA.
> I moved sucessefull from C02B131 to C432B161 but no OTA"
Thanks!
Click to expand...
Click to collapse
Hi, have you managed to solve the problem?
I had the same situation and after hours of trying I have successfully completed the operation. I can send you the steps I did if you are still stuck.
https://forum.xda-developers.com/showpost.php?p=70812680&postcount=92
Alex91Sc said:
https://forum.xda-developers.com/showpost.php?p=70812680&postcount=92
Click to expand...
Click to collapse
Following the steps you mention in your post, voids warranty?
ehduarte said:
Following the steps you mention in your post, voids warranty?
Click to expand...
Click to collapse
The warranty is invalid just unlock bootloader
When the red text shows, just unlock bootloader again and repeat steps for installing twrp and root.
You don't actually need the update extractor, since you can just type in the version of VIE you'd like to transfer to. ( VIE-L29C185B152 example ). After that just flash the b152 ( or any other rom you've named in step 10 in SRK tool ) using sd card method. When you install stock recovery again you should be recieving OTA updates.
jakiced said:
Hi, have you managed to solve the problem?
I had the same situation and after hours of trying I have successfully completed the operation. I can send you the steps I did if you are still stuck.
Click to expand...
Click to collapse
At the time i got so mad and frustrated that i moved to iPhone 7!
But... You know... Apple have those limitations that i'm not used to, like mirror to TV just by enabling a feature without having to buy a box to do it! The share system PC-over-PHONE etc etc...
So i'm wiling to go back to Huawei and i might get another P9 Plus or Mate 9, still deciding.
But really thanks for the time you spent to reply me to try to solve some one else problem! Really appreciated.
By the way, does P9 Plus operator variants will get Nougat? Couldn't find the confirmation anywhere.
Ah, backstabbing android ?
Yes the Nougat update is coming soon! As official huawei page and chat said to me. It is ought to happen this month so i am eagerly awaiting for it every day. I would strongly suggest you go for a Mate, that is my wish also. Also, you could stick with that bitten apple for a couple of months and grab a Huawei P10 that is also coming with + suffix let's say somewhere in april, may, like the P9 did last year.
Cheers mate, all the best luck in returning to android family ?
Hello together,
today i wanted to rebrand my honor 9 from STF-L00 to STF-L09 and everything worked fine for me at the beginning. I unlock my bootloader and then i used the update.bat and follow the instructions. It installed TWRP. After a while nothing happened and i was still in the fastboot mode. In the fastboot mode i saw that my bootloader is locked again.
Now i have no OS and cannot used adb via fastboot, it does not recognize any device detected.
I downloaded MultiTool and it says i have installed STF-L09 now on my phone.
Info:
According to MultiTool is STF-L09 installed
Bootloader and FRP are locked
I just have Huawei eRecovery, but this is not working (Pacakge info fails)
I have no rom, because my phone is booting only in eRecovery
adb fastboot does not get recognized my phone.
Have all drivers needed on pc for adb to work.
HiSuite doesn't support recovery on this device.
Please help me, i don't know what i should do and i really start to despair. :crying::crying::crying:
Thank you very much
I have pretty much the exact same problem. The only difference is I was trying to rebrand from AL10 to L09. Got the same error in the same stage of rebranding, can access the exact same things as you, same goddamn FRP lock etc. Same all the way through except for starting from AL10 in stead of L00.
I have not found any free solution, the best I could find is DC Phoenix whose program claims that it "Can write firmware by fastboot with locked bootloader and locked FRP!" The thing is, it will cost 15 Euros to use this function in their program, and after paying etc. it is only available for 72 hours. At this moment I don't have access to a computer for the next 72 hours, so I have decided to wait a short while until I have a computer available for a 72-hour period. While I guess it would only take a short time, I realise now that nothing is ever as easy as it seems with Huawei and their absolute **** software... hence I want to wait for being able to use all 72 hours before paying.
This link has their guide to what needs to be done:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
If you want to give it a try, it's the one possible solution I've found after MUCH googling. Though I remain hopeful that someone else on this forum might have a better (free) solution!
Hello Sanktgoran,
at first thank you very much for your help.
I have a question about the DC Unlocker. When i use this and write a new firmware by DC Unlocker, then i don't have to rebrand again?
Which rom do i should use to write on my phone?
Should i use the STF-AL00 rom or STF-L09 rom or it doens't matter?
Multitool says that i have STF-L09 on my phone, but my phone have no OS, because it doesn't boot.
Thanks
I'm not sure actually which one to use. I think you should go with the L09, since that is what the phone "thinks" it is at the moment. If it works to instll the L09 Firmware via DC unlocker, I think that would be the rebranding done as well. The way I understand this situation we are both in, our phones are rebranded to L09, just the actual L09 OS isn't really installed properly, and the FRP lock prevents us from unlocking bootloader, which in turn prevents us from completing the installation of L09. So by using the DC Unlocker to bypass the locks and installing the firmware, the process should then be complete.
I'm not sure about this though, it's just how i think it is. It might be that using DC will install the firmware stably and all is well, and it might be that it will install some of it and then the phone can at least boot into an incomplete OS where we could disable the FRP and bootloader locks, and thus be able to use the Update function in the HWOTA script to get things finished. Either way, I'm 99% sure that using the DC Unlocker will get us further along the path to a european Honor 9 than we are at this stage. I'm going to attempt it later today or perhaps tomorrow I think. After all, 15 euros is a small amount to spend compared to the cost of the actual phone...
Did you also copy an OEMinfo file for L09 into your adb/fastboot folder and run this command before using the HWOTA script?
ADB push oeminfo /tmp/oeminfo
ADB shell "dd if=/tmp/oeminfo of=/dev/block/platform/hi_mci.0/by-name/oeminfo"
I did, I'm not 100% sure what it does/is supposed to do, but I think it has made it so that the phone thinks it's done and rebranded, and tries to boot into L09, but since the L09 installation wasn't completed in the HWOTA script, it can't boot because firmware stuff is missing. That has me thinking that it's the L09 and not AL00 which you should use with DC Unlocker.
Did you check https://forum.xda-developers.com/honor-9/help/soft-bricked-honor-9-trying-to-root-t3737967 ?
Finally, it worked for me everything fine.
Here is one tip from me:
I downloaded at first the rom from a website and started to flash, but it failed.
After a long time of searching and asking, i got help.
You have to download directly from the DC Phoenix the rom (with the custominization file) and flash.
When you don't know how, just post here and i will write a short guide.
Thanks for helping. :good:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Sanktgoran said:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Click to expand...
Click to collapse
I use the download function from DC Phoenix.
When you open DC Phoenix, just click "Download Files" and a website will open, where you can search for the rom.
Search for "STF-L09" and you will get all roms for the STF-L09. I prefer to use this rom:
Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Aus
And for every rom you should download the customization file. They are directly together:
Stanford-L09_C432B130_update_data_customization_hw_eu.APP
You have to download both .APP files and the both files are in total almost 3,2 GB.
You open DC Phoenix and open the files there.
The Firmware you open in "Update File"
The customization file you open in "Customization File (optional)"
You connect your phone via fastboot and then you can start to update.
I don't know from which country you are, so i don't know which version of rom do you need.
When you download the rom which i downloaded before, you have just the B130 Version. But theres is already B182 existing. You can download the new rom via your phone in the settings.
Here is also the same guide from DC Unlocker (except of the part how you can download the rom).
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
Somehow its possible to flash firmware in dc Phoenix and having a locked Bootloader.
Shouldnt it be possible to use config.txt and flash twrp as recovery and then flash ur full stock?
Im asking cause i m not able to unlock the bootloader. The V+ Button is broke ( Mainboard related) and i cant agree to unlock after entering my code.
Hello everyone. I have a very serious problem with my Mate 10 Lite (RNE-L21C432)
I tried to install oreo with Firmware Finder but I installed the wrong Firmware (for HONOR) The process was normal, but when I started the phone, HONOR appeared instead of HUAWEI and entered Recovery.
Bootloader and FRP are locked. Can anyone help? Is there a way to fix it? The huawei service told me that a motherboard should be replaced, and it costs a lot
You can try this method
BTW u need custom recovery(TWRP)
Edit:also you need to have bootloader unlocked, unfortunately if u haven't had it unlocked yet, bad news for you then because Huawei has ended their bootloader service
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Hello to all admin and friends,
Recently i decided to have a try on downgrading my huawei p9 from nougat to marshmallow ... After all done I realize that i installed wrong country firmware... to make it back to my country firmware I re-download all the firmware back.... unfortunately i replace the update.app with the "HUAWEI P9 Rollback Package" and I messed up my entire phone... [now my phone is stuck on HUAWEI LOGO.... well guess im facing a hard brick.. T.T ] on fastboot ... my phone & frp locked... i tried to unlock bootloader, phone n frp all that stuff but still failed.... adb etc has installed tried few tutorial on post and youtube channel step by step but still cant fix my problem... anyone that kind enough willing to help me please?
oeurn.ren said:
Hello to all admin and friends,
Recently i decided to have a try on downgrading my huawei p9 from nougat to marshmallow ... After all done I realize that i installed wrong country firmware... to make it back to my country firmware I re-download all the firmware back.... unfortunately i replace the update.app with the "HUAWEI P9 Rollback Package" and I messed up my entire phone... [now my phone is stuck on HUAWEI LOGO.... well guess im facing a hard brick.. T.T ] on fastboot ... my phone & frp locked... i tried to unlock bootloader, phone n frp all that stuff but still failed.... adb etc has installed tried few tutorial on post and youtube channel step by step but still cant fix my problem... anyone that kind enough willing to help me please?
Click to expand...
Click to collapse
Hi there,
Are you able to connect your phone and can ADB Recognise it?
Hello, i am here for repair of my broken huawei y5 2018 DRA-LX2 , where i lost my imei on my phone after taking back from repair of password removal.
i tried to reflash stock firmware using sp flash tool but it fails always. is shows an error message of "ERROR:STATUS_BROM_CMD_FAIL(0xC0060005)" i am unable to solve this problem please help me to reflash the stock rom on my device. i tried to read phones info and imei from fastboot it seems fine there i can able to read imei from fastboot but i can't flash from there. Please help me as soon as possible thank you. dont mind if my english is bad
:good: