Related
After failing the Debrand following method [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei by @somboons i'm asking some help or guidance regarding to fix this asap since this is my main phone
This was a C02B131 to C432B161 process
I'll explain (like i did in original thread [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei):
Quoted:
"Hello,
My Huawei Update Extractor doesnt show P9 Plus in profile. Even if i choose "Unknown" the VERLIST.img code i get is VIE_C900B00 but i'm using C432B161 ROM, is this normal?
So here's the current situation:
Before this procedure i had already the C432B161 inside sccard dload folder.
After the OEMINFO part when phone restarted the normal orange text saying it was unlcked and might be untrustable were in RED and phone started like encripted - i coulndt to a thing but insert the encrypt code so >
> i restarted phone with vol down + power combo key thinking of TWRP but... wrong combo and phone started update the ROM i had already in DLOAD.
> All went OK (surprisly) and everything is working fine but the OTA.
> I moved sucessefull from C02B131 to C432B161 but no OTA"
Thanks!
migueli2 said:
After failing the Debrand following method [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei by @somboons i'm asking some help or guidance regarding to fix this asap since this is my main phone
This was a C02B131 to C432B161 process
I'll explain (like i did in original thread [VDO-GUIDE] How to debrand Huawei Phone by SRK Tool Huawei):
Quoted:
"Hello,
My Huawei Update Extractor doesnt show P9 Plus in profile. Even if i choose "Unknown" the VERLIST.img code i get is VIE_C900B00 but i'm using C432B161 ROM, is this normal?
So here's the current situation:
Before this procedure i had already the C432B161 inside sccard dload folder.
After the OEMINFO part when phone restarted the normal orange text saying it was unlcked and might be untrustable were in RED and phone started like encripted - i coulndt to a thing but insert the encrypt code so >
> i restarted phone with vol down + power combo key thinking of TWRP but... wrong combo and phone started update the ROM i had already in DLOAD.
> All went OK (surprisly) and everything is working fine but the OTA.
> I moved sucessefull from C02B131 to C432B161 but no OTA"
Thanks!
Click to expand...
Click to collapse
Hi, have you managed to solve the problem?
I had the same situation and after hours of trying I have successfully completed the operation. I can send you the steps I did if you are still stuck.
https://forum.xda-developers.com/showpost.php?p=70812680&postcount=92
Alex91Sc said:
https://forum.xda-developers.com/showpost.php?p=70812680&postcount=92
Click to expand...
Click to collapse
Following the steps you mention in your post, voids warranty?
ehduarte said:
Following the steps you mention in your post, voids warranty?
Click to expand...
Click to collapse
The warranty is invalid just unlock bootloader
When the red text shows, just unlock bootloader again and repeat steps for installing twrp and root.
You don't actually need the update extractor, since you can just type in the version of VIE you'd like to transfer to. ( VIE-L29C185B152 example ). After that just flash the b152 ( or any other rom you've named in step 10 in SRK tool ) using sd card method. When you install stock recovery again you should be recieving OTA updates.
jakiced said:
Hi, have you managed to solve the problem?
I had the same situation and after hours of trying I have successfully completed the operation. I can send you the steps I did if you are still stuck.
Click to expand...
Click to collapse
At the time i got so mad and frustrated that i moved to iPhone 7!
But... You know... Apple have those limitations that i'm not used to, like mirror to TV just by enabling a feature without having to buy a box to do it! The share system PC-over-PHONE etc etc...
So i'm wiling to go back to Huawei and i might get another P9 Plus or Mate 9, still deciding.
But really thanks for the time you spent to reply me to try to solve some one else problem! Really appreciated.
By the way, does P9 Plus operator variants will get Nougat? Couldn't find the confirmation anywhere.
Ah, backstabbing android ?
Yes the Nougat update is coming soon! As official huawei page and chat said to me. It is ought to happen this month so i am eagerly awaiting for it every day. I would strongly suggest you go for a Mate, that is my wish also. Also, you could stick with that bitten apple for a couple of months and grab a Huawei P10 that is also coming with + suffix let's say somewhere in april, may, like the P9 did last year.
Cheers mate, all the best luck in returning to android family ?
This is the official FunkyHuawei support thread.
FunkyHuawei is a (mostly) paid service which allows you to do the following:
1. Install the latest system software, even before it's released by OTA.
2. Install beta/prerelease system software, without needing to be a beta tester.
3. Recover a bricked phone.
4. Rebranding / Change the region of your phone (China -> Europe, for example, to get Google and so on.)
5. Root your EMUI 8 phone, even with stock recovery (This feature is free)
Except for rooting, all of these features are supported even if you cannot unlock your phone's bootloader.
To find FunkyHuawei, please Google it. Or you can find a link to the service within the following XDA Portal article.
https://www.xda-developers.com/android-oreo-emui-6-huawei-mate-9/
We are pleased to announce FHUnbrickFlashTool -- You can now repair any recent Huawei phone via fastboot, even if you cannot access eRecovery or boot the phone! Even if it doesn't show the Huawei logo, as long as you can get a fastboot connection to your computer, you can recover the phone! Google FHUnbrickFlashTool or check FunkyHuawei's reddit for details.
In cooperation with XDA, FunkyHuawei is offering a free credit to Recognized Developers and Recognized Contributers on XDA.
Please PM me for more details.
We will continue posting in this thread with updates regarding new software versions and releases regarding this device.
We will also be monitoring it so we can help anyone who has issues.
For device-specific information, please see the next post.
P10 Device-Specific Information
The P10 now has a relatively mature community with many methods to do many things.
However, there are still some things only possible with FunkyHuawei, so it would be most useful for:
1. Installing updates on bootloader-locked devices, even if the update is not approved by Huawei for your device.
2. Rebranding bootloader-locked devices, or rebranding to obscure carrier brandings.
3. Restoring bricked devices.
Note that even though the Mate 10 Root tool is designed for the Mate 10, it works perfectly on the P10 running Android O betas.
This tool is FREE, and might be easier than installing TWRP and rooting that way.
Frequently Asked Questions
Q: How much does FunkyHuawei cost?
A: You need to buy credits on the FunkyHuawei website. The price per credit varies depending on the number of credits you buy. Different operations cost different amounts of credits. However, the Root feature of the Mate 10 tool is free, and as mentioned above, Recognized Developers/Contributors of XDA can ask for a free credit.
Q: My phone is bootloader locked, and FRP locked. My bootloader unlock code dosen't work. It won't boot. eRecovery doesn't work. Can you help?
A: Yes. With the Mate 10 this is now a common situation. Contact FunkyHuawei for help in this situation. We'll need to access your computer remotely and the procedure is a little bit complicated, but the phone can be unbricked.
Q: I can't get my bootloader unlock code/don't want to unlock my bootloader, but I want to change my phone to something other than Chinese. Can you help?
A: Yes. Our new FunkyHuawei Rebrand Tool works on ALL recent Huawei phones, to rebrand them to another region even when the bootloader is locked.
Q: I'm not seeing the latest version listed on FunkyHuawei or elsewhere as an OTA. Why not?
A: Huawei has a very odd and unpredictable way of rolling out OTA updates. You can use FunkyHuawei to install the new version immediately, or can wait for the update to be rolled out. It might be a month or more after release until the update reaches your device from Huawei directly. We have no idea why.
Q: Why isn't FunkyHuawei free?
A: Because many of FunkyHuawei's features cost FunkyHuawei money to provide. Features that don't cost FunkyHuawei money to provide, like rooting the Mate 10 or our TWRP build for Mate 9/Oreo, for example, are generally made available for free. There are also bills to pay, kids to put through school, and so on.
Q: I noticed FunkyHuawei in an XDA Portal article!
A: FunkyHuawei loves XDA, and is cooperating with them as much as possible. Recognized Developers and Contributors on the XDA forums are welcome to claim a free credit from FunkyHuawei as well.
Q: I have a different question.
A: This is what this thread is for! Post away!
duraaraa said:
P10 Device-Specific Information
The P10 now has a relatively mature community with many methods to do many things.
However, there are still some things only possible with FunkyHuawei, so it would be most useful for:
1. Installing updates on bootloader-locked devices, even if the update is not approved by Huawei for your device.
2. Rebranding bootloader-locked devices, or rebranding to obscure carrier brandings.
3. Restoring bricked devices..
Click to expand...
Click to collapse
Luckilly the P10 community here is mature enough that there is no longer a need for Funky's services. However effective Funky may be, we can save ourselves the 30bucks and do it ourselves
We are pleased to announce FHUnbrickFlashTool -- You can now repair any recent Huawei phone via fastboot, even if you cannot access eRecovery or boot the phone! Even if it doesn't show the Huawei logo, as long as you can get a fastboot connection to your computer, you can recover the phone! Google FHUnbrickFlashTool or check FunkyHuawei's reddit for details.
We have added a brand new Android O build for the Chinese P10.
You will need to rebrand your phone to VTR-AL00 (all/cn) to install it.
Best to use HiSuite to install it -- check out Mate 10 rebranding information to find the correct version of HiSuite and instructions.
We now have Android O for International P10 and P10 Plus.
Check FunkyHuawei reddit for install instructions, or google for "Android O Builds for International P10 and P10 Plus now available! Instructions inside"
This is great news!!
If I only got some $:crying: but nice news
Does this include Treble?
tiktok1 said:
Does this include Treble?
Click to expand...
Click to collapse
Yes, of course.
Hey all, I'm having a problems to which i've been pulling my hair out and not sure what to do. Essentially, I had my phone rooted, although later decided I wanted to unroot. To unroot I used an app called "simply unroot" however it did not fully unroot my device, just made it worse, my phone does not pass the safety net, however "root checker apps" suggest my phone is not rooted, although some apps recognise my phone as being rooted. My phone bootloader is unlocked, but the OEM toggle in the developer options is not set as enabled, and is NOW greyed out so i cant click it, meaning i do not have access to any fastboot commands and thus cannot flash a recovery.img. Although, believe after having trying to unroot it had automatically disable OEM. I have tried to lock the bootloader in the hopes that OEM toggle would no longer be greyed out, but cannot do this as i dont have access to fastboot commands. Even with TWRP i cannot flash anything just promps me with Error 9. I have tried storing the UPDATE.app within the dload folder, but that doesnt work either. I have no idea how i can recover this device. Fell like i've tried everything. Please help.
rustymole said:
Hey all, I'm having a problems to which i've been pulling my hair out and not sure what to do. Essentially, I had my phone rooted, although later decided I wanted to unroot. To unroot I used an app called "simply unroot" however it did not fully unroot my device, just made it worse, my phone does not pass the safety net, however "root checker apps" suggest my phone is not rooted, although some apps recognise my phone as being rooted. My phone bootloader is unlocked, but the OEM toggle in the developer options is not set as enabled, and is NOW greyed out so i cant click it, meaning i do not have access to any fastboot commands and thus cannot flash a recovery.img. Although, believe after having trying to unroot it had automatically disable OEM. I have tried to lock the bootloader in the hopes that OEM toggle would no longer be greyed out, but cannot do this as i dont have access to fastboot commands. Even with TWRP i cannot flash anything just promps me with Error 9. I have tried storing the UPDATE.app within the dload folder, but that doesnt work either. I have no idea how i can recover this device. Fell like i've tried everything. Please help.
Click to expand...
Click to collapse
Why you pose this question in the "official funkyhuawei support" thread is beyond me....
Only thing that comes to mind is: do you have USB debugging enabled in the developers options? It should be enabled if you want to use ADB or Fastboot.
rustymole said:
Hey all, I'm having a problems to which i've been pulling my hair out and not sure what to do. Essentially, I had my phone rooted, although later decided I wanted to unroot. To unroot I used an app called "simply unroot" however it did not fully unroot my device, just made it worse, my phone does not pass the safety net, however "root checker apps" suggest my phone is not rooted, although some apps recognise my phone as being rooted. My phone bootloader is unlocked, but the OEM toggle in the developer options is not set as enabled, and is NOW greyed out so i cant click it, meaning i do not have access to any fastboot commands and thus cannot flash a recovery.img. Although, believe after having trying to unroot it had automatically disable OEM. I have tried to lock the bootloader in the hopes that OEM toggle would no longer be greyed out, but cannot do this as i dont have access to fastboot commands. Even with TWRP i cannot flash anything just promps me with Error 9. I have tried storing the UPDATE.app within the dload folder, but that doesnt work either. I have no idea how i can recover this device. Fell like i've tried everything. Please help.
Click to expand...
Click to collapse
You can use FunkyHuawei eRecovery method to return it to stock.
I recently updated my P10 VTR L29 C432 from nougat to Oreo B360 via oreoupgrade script method as posted in forum but after update my bootloader seems to be locked again i wanted to root my phone via installing TWRP but it's not allowed by fastboot
Any solution or any solution to unlock bootloader or root the phone without losing data !? I have too much files and apps on phone that i won't lose
Hello together,
today i wanted to rebrand my honor 9 from STF-L00 to STF-L09 and everything worked fine for me at the beginning. I unlock my bootloader and then i used the update.bat and follow the instructions. It installed TWRP. After a while nothing happened and i was still in the fastboot mode. In the fastboot mode i saw that my bootloader is locked again.
Now i have no OS and cannot used adb via fastboot, it does not recognize any device detected.
I downloaded MultiTool and it says i have installed STF-L09 now on my phone.
Info:
According to MultiTool is STF-L09 installed
Bootloader and FRP are locked
I just have Huawei eRecovery, but this is not working (Pacakge info fails)
I have no rom, because my phone is booting only in eRecovery
adb fastboot does not get recognized my phone.
Have all drivers needed on pc for adb to work.
HiSuite doesn't support recovery on this device.
Please help me, i don't know what i should do and i really start to despair. :crying::crying::crying:
Thank you very much
I have pretty much the exact same problem. The only difference is I was trying to rebrand from AL10 to L09. Got the same error in the same stage of rebranding, can access the exact same things as you, same goddamn FRP lock etc. Same all the way through except for starting from AL10 in stead of L00.
I have not found any free solution, the best I could find is DC Phoenix whose program claims that it "Can write firmware by fastboot with locked bootloader and locked FRP!" The thing is, it will cost 15 Euros to use this function in their program, and after paying etc. it is only available for 72 hours. At this moment I don't have access to a computer for the next 72 hours, so I have decided to wait a short while until I have a computer available for a 72-hour period. While I guess it would only take a short time, I realise now that nothing is ever as easy as it seems with Huawei and their absolute **** software... hence I want to wait for being able to use all 72 hours before paying.
This link has their guide to what needs to be done:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
If you want to give it a try, it's the one possible solution I've found after MUCH googling. Though I remain hopeful that someone else on this forum might have a better (free) solution!
Hello Sanktgoran,
at first thank you very much for your help.
I have a question about the DC Unlocker. When i use this and write a new firmware by DC Unlocker, then i don't have to rebrand again?
Which rom do i should use to write on my phone?
Should i use the STF-AL00 rom or STF-L09 rom or it doens't matter?
Multitool says that i have STF-L09 on my phone, but my phone have no OS, because it doesn't boot.
Thanks
I'm not sure actually which one to use. I think you should go with the L09, since that is what the phone "thinks" it is at the moment. If it works to instll the L09 Firmware via DC unlocker, I think that would be the rebranding done as well. The way I understand this situation we are both in, our phones are rebranded to L09, just the actual L09 OS isn't really installed properly, and the FRP lock prevents us from unlocking bootloader, which in turn prevents us from completing the installation of L09. So by using the DC Unlocker to bypass the locks and installing the firmware, the process should then be complete.
I'm not sure about this though, it's just how i think it is. It might be that using DC will install the firmware stably and all is well, and it might be that it will install some of it and then the phone can at least boot into an incomplete OS where we could disable the FRP and bootloader locks, and thus be able to use the Update function in the HWOTA script to get things finished. Either way, I'm 99% sure that using the DC Unlocker will get us further along the path to a european Honor 9 than we are at this stage. I'm going to attempt it later today or perhaps tomorrow I think. After all, 15 euros is a small amount to spend compared to the cost of the actual phone...
Did you also copy an OEMinfo file for L09 into your adb/fastboot folder and run this command before using the HWOTA script?
ADB push oeminfo /tmp/oeminfo
ADB shell "dd if=/tmp/oeminfo of=/dev/block/platform/hi_mci.0/by-name/oeminfo"
I did, I'm not 100% sure what it does/is supposed to do, but I think it has made it so that the phone thinks it's done and rebranded, and tries to boot into L09, but since the L09 installation wasn't completed in the HWOTA script, it can't boot because firmware stuff is missing. That has me thinking that it's the L09 and not AL00 which you should use with DC Unlocker.
Did you check https://forum.xda-developers.com/honor-9/help/soft-bricked-honor-9-trying-to-root-t3737967 ?
Finally, it worked for me everything fine.
Here is one tip from me:
I downloaded at first the rom from a website and started to flash, but it failed.
After a long time of searching and asking, i got help.
You have to download directly from the DC Phoenix the rom (with the custominization file) and flash.
When you don't know how, just post here and i will write a short guide.
Thanks for helping. :good:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Sanktgoran said:
That's great, glad things worked out for you! Was it the full firmware file you downloaded from DC Phoenix, the ~4 gigabyte update.app file? Or the three .zip files, update.zip, update_data_full_public.zip and update_full_stf-L09_hw_eu? Do you download it from their website or through the DC Unlocker program? How big was the entire download? I'm on a limited monthly data kind of thing, just curious how big the download is.
Click to expand...
Click to collapse
I use the download function from DC Phoenix.
When you open DC Phoenix, just click "Download Files" and a website will open, where you can search for the rom.
Search for "STF-L09" and you will get all roms for the STF-L09. I prefer to use this rom:
Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Aus
And for every rom you should download the customization file. They are directly together:
Stanford-L09_C432B130_update_data_customization_hw_eu.APP
You have to download both .APP files and the both files are in total almost 3,2 GB.
You open DC Phoenix and open the files there.
The Firmware you open in "Update File"
The customization file you open in "Customization File (optional)"
You connect your phone via fastboot and then you can start to update.
I don't know from which country you are, so i don't know which version of rom do you need.
When you download the rom which i downloaded before, you have just the B130 Version. But theres is already B182 existing. You can download the new rom via your phone in the settings.
Here is also the same guide from DC Unlocker (except of the part how you can download the rom).
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
Somehow its possible to flash firmware in dc Phoenix and having a locked Bootloader.
Shouldnt it be possible to use config.txt and flash twrp as recovery and then flash ur full stock?
Im asking cause i m not able to unlock the bootloader. The V+ Button is broke ( Mainboard related) and i cant agree to unlock after entering my code.
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Waited 4 yrs to upgrade from a OnePlus5 and these Chinese system apps are such a downer. Glad to see you two on to the right questions.
tigerfelix said:
... The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
remind me of the steps?
tigerfelix said:
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
I'm facing the same issue. Have activated USB debugging on my X3 Pro, but when I shut down and restart whilst also holding volume up button, it doesn't go in to fast boot. Is there a way of activating fast boot by plugging phone into computer?
p1gnone said:
remind me of the steps?
Click to expand...
Click to collapse
The steps to enable developer mode? Go to About Phone, there you will see a screen with lots of info about the phone, including the OS. Tap on *Baseband & kernel", then you see three infos. There you click multiple times on "Build number", which will unlock developer mode. This you then find under "Additional settings" in the main settings. Then you can enable "OEM unlock" (which doesn't help unless you can access the bootloader and actually unlock it...) and "USB debugging". I'll survive without root for now, hoping some clever XDA devs will figure this device out eventually. It's an amazing phone, and I hope they will release a true international version of the firmware at some point, so I won't see the Chinese core-apps anymore...
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
gaztom78 said:
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
Click to expand...
Click to collapse
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
tigerfelix said:
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
Click to expand...
Click to collapse
Deeptest. Apk or in depth test.apk Google them a new version 1.1 was released three days ago but no info on what model phone it is for
Thanks for the tip. Among other things, I came across this:
OPPO Community
Talk, share, and learn everything about the beautiful possibilities of technology together with other OPPO fans.
community.coloros.com
Sounds like this is for devs only, and not yet for the FX3. So for now, I'll keep my hands off it - don't think I'm at the required skill level yet. But still - a good tip, and it gives me some hope that root access might be possible in the near future.
I have what I'm pretty sure is the global variant and I am able to enter fastbootd
Oh wow. Great! May I ask you to please share how you manged to pull that off? And once you accessed fastboot, did you e.g. manage to root the device? Please, also here, a "how" would be preferred over a "yes"?
Or is there a way to root the phone with apps like KingoRoot etc?
I'm not pro in this area, but i find this:
Spoiler: link
How To Unlock OPPO Find X3 Pro Bootloader - NaldoTech
Follow this guide to learn how to unlock the bootloader on your OPPO Find X3 Pro. Most modern Android phones come with locked bootloaders, which make it
www.naldotech.com
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Speaka said:
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Click to expand...
Click to collapse
So buy oneplus or xiaomi. Dont buy oppo.
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高，不那么友好，本教程为ROM乐园首发，其他网站禁止私自转载发布
www.romleyuan.com
georgiy8428 said:
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高，不那么友好，本教程为ROM乐园首发，其他网站禁止私自转载发布
www.romleyuan.com
Click to expand...
Click to collapse
This is what this website tells you when trying to download the app you listed:
1. This service is a one-time payment, the order can be displayed in the personal center after purchase, and it can be used unlimitedly within the validity period
2. The phone comes with a BootLoader model at the factory, please unlock the BL by yourself in advance, and then make a paid purchase
3. The flashing package information belongs to the payment for flashing the data, and not for other services such as paid assistance. Please be aware
4. Relevant introductions and pictures are for reference only, different models may have differences, the address will be automatically obtained after purchase 5. For problems such as resource failure or error, you can contact online customer service QQ or WeChat in the personal center after successful purchase
You have to unlock your bootloader before you can use this app, that is supposed to unlock the bootloader.....
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Update:
Not china version findx3 please use OplusDowngradeTool to download the downgrade rom.
https://561234.xyz/d/设备/Find X3/C11降级包/OplusDowngradeTool.zip
This tool maybe chinese only, there is a video for how to use it:
https://561234.xyz/设备/Find X3/C11降级包/OplusDowngradeTool-OperationDemo.mp4
exg0zz said:
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Click to expand...
Click to collapse
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
georgiy8428 said:
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
Click to expand...
Click to collapse
Currently there's no method to unlock oppo phone on android 12.
Hello everyone,
I recently got the Realme 7 5G and I'm looking for a way to root or unlock the bootloader. I've tried the post here:
https://forum.xda-developers.com/t/realme-7-5g-eu-version-guide-for-unlock-bootloader.4272495/
But it doesn't work now.
Phone info:
Realme 7 5g
Realme UI 2.0
Android 11
800U 8GB ram
Model: RMX2111
AUSTRALIAN VARIANT
If there is a way please let me know, im sure tons of people will appreciate it aswell!
Maybe if you would tell us what you mean by "it doesn't work" we can be more helpful.
How far did you get in the process? What error messages do you get?
pochutkova.smotana said:
Maybe if you would tell us what you mean by "it doesn't work" we can be more helpful.
How far did you get in the process? What error messages do you get?
Click to expand...
Click to collapse
I was doing the steps to get the unlocker working, changing mac, running the oppo tool and i tried to change the region but the code just didnt work
. Also is it impossible to get fastboot on the realme 7 5g? I tried 'adb reboot bootloader' and it just didnt work.
andyboi123 said:
I was doing the steps to get the unlocker working, changing mac, running the oppo tool and i tried to change the region but the code just didnt work
. Also is it impossible to get fastboot on the realme 7 5g? I tried 'adb reboot bootloader' and it just didnt work.
Click to expand...
Click to collapse
How old is the guide? Pretty sure I read somewhere that OPPO did some patching that stopped a certain tool from working.
OrthodoxOxygen said:
How old is the guide? Pretty sure I read somewhere that OPPO did some patching that stopped a certain tool from working.
Click to expand...
Click to collapse
I guess they did, I just don't get why realme restricts the unlock tool to india.
andyboi123 said:
I guess they did, I just don't get why realme restricts the unlock tool to india.
Click to expand...
Click to collapse
There is a way around it. I'm a bit busy at the moment, but I'll try and scrape around my history tomorrow to try and find what I'm talking about. Feel free to do some digging of your own, of course. No guarantees that it'll fix the issue, however, so be wary of that.
`
OrthodoxOxygen said:
There is a way around it. I'm a bit busy at the moment, but I'll try and scrape around my history tomorrow to try and find what I'm talking about. Feel free to do some digging of your own, of course. No guarantees that it'll fix the issue, however, so be wary of that.
Click to expand...
Click to collapse
If you do have a method, this will undoubtedly help a lot of people (including me)!
I did it few weeks ago on Android 10 Realme 7 5G and it worked smoothly.
After I got the OK in the right window of Sec5 tool the code worked for me. If I wanted to run the code again though, I had to use Sec5 again.
Maybe retry the Sec5? Are you running Android 10 or 11 on your Realme?
'adb reboot bootloader' doesn't work, the idea of the whole process is to be able to boot into the bootloader (which is enabled by "in-depth testing app") where you can unlock the bootloader and subsequently boot into bootloader any time you want to.
pochutkova.smotana said:
I did it few weeks ago on Android 10 Realme 7 5G and it worked smoothly.
After I got the OK in the right window of Sec5 tool the code worked for me. If I wanted to run the code again though, I had to use Sec5 again.
Maybe retry the Sec5? Are you running Android 10 or 11 on your Realme?
'adb reboot bootloader' doesn't work, the idea of the whole process is to be able to boot into the bootloader (which is enabled by "in-depth testing app") where you can unlock the bootloader and subsequently boot into bootloader any time you want to.
Click to expand...
Click to collapse
Oh, I'm running Realme UI 2.0 (Android 11). Maybe they patched it in the update?
Also, I've run Sec5 multiple times, it says 'ok' and when I put the code in, it just won't do it. Really frustrating how realme locked the in-depth test to India phones only.