I have a SM-G925F and running 7.0 (NRD90M.G925FXXU6ERF5) and cant find the correct file to install with Odin.
I tested with twrp-3.2.3-0-zerolte.img but didnt work.
Can you please help me to root my phone ?
tokayto said:
I have a SM-G925F and running 7.0 (NRD90M.G925FXXU6ERF5) and cant find the correct file to install with Odin.
I tested with twrp-3.2.3-0-zerolte.img but didnt work.
Can you please help me to root my phone ?
Click to expand...
Click to collapse
Use twrp. You need to use .img.tar otherwise it won't work. Try again with the correct file and it will work. Then flash magisk through twrp
callumbr1 said:
Use twrp. You need to use .img.tar otherwise it won't work. Try again with the correct file and it will work. Then flash magisk through twrp
Click to expand...
Click to collapse
https://eu.dl.twrp.me/zerolte/twrp-3.2.3-0-zerolte.img.tar.html
I tried with this and it looked like it worked on Odin but when i try to boot in recovery mode, it says no command with a broken android logo and it gets into a android's recovery mode and i cant see the magisk zip file there. It says couldn't mount /sdcard.
tokayto said:
https://eu.dl.twrp.me/zerolte/twrp-3.2.3-0-zerolte.img.tar.html
I tried with this and it looked like it worked on Odin but when i try to boot in recovery mode, it says no command with a broken android logo and it gets into a android's recovery mode and i cant see the magisk zip file there. It says couldn't mount /sdcard.
Click to expand...
Click to collapse
You need to hold recovery combo, then click start in odin. Keep holding recovery combo until flash complete and twrp booted
Related
I installed a xposed module, things went wrong and now I'm stuck on bootloop, I've read that xposed made a recovery but i've never done such thing, and i can't find any information about it, how can I flash this zip,
I'm already at fasboot in cmd, I've tried flashall but it didn't work, help :good:
JonathanJumper said:
I installed a xposed module, things went wrong and now I'm stuck on bootloop, I've read that xposed made a recovery but i've never done such thing, and i can't find any information about it, how can I flash this zip,
I'm already at fasboot in cmd, I've tried flashall but it didn't work, help :good:
Click to expand...
Click to collapse
Xposed when installed makes Xposed-disable-recovery.zip which is stored in internal storage of your phone . You should enter into your phone's recovery mode and flash that zip to disable all xposed modules .
Hit thanks if it works
4shreyas said:
Xposed when installed makes Xposed-disable-recovery.zip which is stored in internal storage of your phone . You should enter into your phone's recovery mode and flash that zip to disable all xposed modules .
Hit thanks if it works
Click to expand...
Click to collapse
How to do this using stock recovery??
kushpancake said:
How to do this using stock recovery??
Click to expand...
Click to collapse
Hi
Stock recovery has signature verification so it won't work . I have not tried it but you can give it a try . Rename Xposed-disable-recovery.zip to update.zip and place it in root of sdcard. Now go to stock recovery and choose option update from sdcard . It checks for signature and then installs . And I'm sure It won't work . You should install custom recovery and flash that zip. In custom recovery signature verification can be disabled and can be used to flash any zip
Thanks
Thank you. I got it to work using another method... You can hold either the home, vol up, or vol down button while phone is starting up and it disables xposed. Which custom recoverry do you suggest I use? Im on a galaxy s5 with Verizon, and nk2 build rooted.
Sent from my SM-G900V
Hi, I have a bootloop after install xposed on chuwi vi10, I've tried to flash a recovery image trough fastboot and also tried intelandroidfbrl, but I can't manage to flash it.
These are the images.
http://es.tinypic.com/view.php?pic=103v311&s=8
http://es.tinypic.com/view.php?pic=bhx8yc&s=8
Please I need help.
Is there a possibility to go into the recovery mode without using hardware keys or apps in a ROM?
Situation:
Download mode with odin works.
Power button destroyed.
Volume up + Home button brings no effect.
If it starts, it boots to ROM-Splash and seems to stuck in a bootloop.
Flashed Custom ROMs and Stock ROM, 1 and 3 parted - no success.
Is there a way to force the I9100 to boot into the recovery without Apps, Android or hardware keys?
In best, out of download mode with odin, like "odin force reboot"-tar file.
You can use adb. I think there is command like fastboot reboot recovery or something like thah
Sent from my iPad using Tapatalk
MatNEWBIE said:
You can use adb. I think there is command like fastboot reboot recovery or something like thah
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thanks für your replay.
adb oder fastboot reboot recovery does not work - impossible to get a connection to device.
Isn't it possible to write a tar file and flash it via Odin that lets the device start into recovery next time?
I was never doing so. I don't use Odin too often, to get learn more I'm trying to do staff using adb... Hmmmm..... Were you trying to just flash stock kernel? Or kernel with philz? (Btw have you seen somewhere unsecured kernel with twrp same as stock? Share link if you had plx)
For this tar file... I think it's quite possible so search further.
P.S. I'm quite sure that I read that you can get out of such brick with adb but I forget how...
Sent from my iPad using Tapatalk
MatNEWBIE said:
Were you trying to just flash stock kernel?
Click to expand...
Click to collapse
No, always flashed 1 or 3 parted stuck ROM.
You think about formatting internal SD with pit-file and flash stock kernel from 3-parted stock ROM?
I don't remember where I could find it.
Would be a try, I think, whether it boots only into recovery after flashing.
I remember once, I flashed a kernel with CWM and that happend.
But never again.
Or kernel with philz?
Click to expand...
Click to collapse
Yes, no chance.
Only boots Stock ROM and bootloops.
I can't get into recovery, thats the problem.
(Btw have you seen somewhere unsecured kernel with twrp same as stock? Share link if you had plx)
Click to expand...
Click to collapse
not yet. If so, I'll link (try this first: http://www.cyanogenmod-forum.de/Thread-DOWNLOAD-TWRP-Downloadlinks)
For this tar file... I think it's quite possible so search further.
P.S. I'm quite sure that I read that you can get out of such brick with adb but I forget how...
Click to expand...
Click to collapse
I hope so.
ADB: I can't a a connection to the device, that's the problem. Else I could use adb reboot recovery to get into recovery and flash a new ROM, wiping, etc.
But I can't geht into recovery.
I really need such a script.
It is possible to create odin-friendly tar-files, but I don't know what to put in so it boots into recovery afterwards.
i found this:
http://www.androidinfotech.com/2016/11/root-samsung-galaxy-c7-c7000-marshmallow-install-twrp.html
but when i tried to install twrp odin said custom binary blocked by FRP lock. after getting out of it by oem unlocking in setting and trying again odin said custom binary blocked by crom. plz help seniors...
twrp file
here is the twrp file used to install by odin
Anyone tried?? Plz update...
also was able to remove CROM lock by downloading CROM services app from samsung app store. installed twrp but it doesnot work. there is stock recovery even after installing this twrp....
Do you need google store? If yes, you can install the HK stock rom using Odin.
eisui said:
Do you need google store? If yes, you can install the HK stock rom using Odin.
Click to expand...
Click to collapse
i already have HK version. but i need to root my device.
supertausif2003 said:
i found this:
http://www.androidinfotech.com/2016/11/root-samsung-galaxy-c7-c7000-marshmallow-install-twrp.html
but when i tried to install twrp odin said custom binary blocked by FRP lock. after getting out of it by oem unlocking in setting and trying again odin said custom binary blocked by crom. plz help seniors...
Click to expand...
Click to collapse
Hi, they have 2 files of twrp in the post and he say "If You can't Flash the Above TWRP try the Below one"
2 questions...
So has you try the second twrp ? And
Do you use your odin package or that on the post ?
I used my own odin package as it shows pass after flashing twrp. I tried both files but nothing changed. Stock recovery boots after flashing either file.
Craps, it's really not good
flash twrp recovery
it will succeed
but tickout restart after flashing option in odin
*when flashing complete, remove battery if you can or switch off phone
and enter recovery mode , don't boot to normal
eisui said:
Do you need google store? If yes, you can install the HK stock rom using Odin.
Click to expand...
Click to collapse
My device is running: C7000ZCU2APL5
I tried to install HK firmware: C7000ZHU2APK5 to unlock the play store but got error user.img.ext4 - size is too big 52600792 < 113672120 when flashing in odin
How and which HK firmware can i flash in order to get the play store?
Did you find a solution for this?
bazg777 said:
My device is running: C7000ZCU2APL5
I tried to install HK firmware: C7000ZHU2APK5 to unlock the play store but got error user.img.ext4 - size is too big 52600792 < 113672120 when flashing in odin
How and which HK firmware can i flash in order to get the play store?
Click to expand...
Click to collapse
Did you ever find a solution? I'm stuck with the same. PIT file for China and Honk Kong is the same so I don't why the partitioning is not working right
Remove battery of your device before flashing using odin , Donot check reboot after flashing.
Flash recovery using odin , remove usb from device , put battery back and then try running recovery , worked for me.
akash14darshan said:
Remove battery of your device before flashing using odin , Donot check reboot after flashing.
Flash recovery using odin , remove usb from device , put battery back and then try running recovery , worked for me.
Click to expand...
Click to collapse
When I do this and I try and load recovery after it just goes to download mode instead. what firmware have you got on the device?
bazg777 said:
When I do this and I try and load recovery after it just goes to download mode instead. what firmware have you got on the device?
Click to expand...
Click to collapse
You can and you should flash in download mode , I dont think you'll be able to flash anything using odin without going into download mode
akash14darshan said:
You can and you should flash in download mode , I dont think you'll be able to flash anything using odin without going into download mode
Click to expand...
Click to collapse
I did flash in download mode. After flashing remove cable, power off without restart. Power on holding recovery keys - the device says "booting recovery..." in red text at the top but it boots to download mode instead.
Which rom were you using when you flashed TWRP?
Here is the solution
https://forum.xda-developers.com/android/help/install-hk-version-chine-sm-c7000-32gb-t3550591
Hello XDA!
I am writing this thread to ask for help rooting my Samsung Galaxy J2 Pro.
I attempted to use apps such as: Framaroot, Kingroot, etc.. but so far none of them have worked and I have not been able to find a working guide on the internet of how to root my phone.
I also tried installing an unofficial version of TWRP for my phone but everytime I tried to boot into the recovery it would say "No Command" and then boot into the original recovery.
Is anyone able to help me root my phone? Can it even be done?
Any help is sincerely appreciated. Thanks!
Phone Specifications:
Samsung Galaxy J2 Pro.
SM-J250G
Android Version: 7.1.1
Bumpity Bump
Try this at your own risk
Make a backup before trying
I got root access with this method
Download stock Rom from sammobile extract and there should be 5 MD5 files extract the AP file with 7z and copied boot.img on to sdcard
Installed MagicalMmanager-7 used it to patch the boot.img to a tar file
Copied the boot image to my pc desktop then flashed the boot with odin
When I booted it back up magisk manager kept crashing so I uninstalled it and installed magiskmanager-5.23 rebooted it opened magisk and followed the prompts to update it
:good:
putzwon said:
Try this at your own risk
Make a backup before trying
I got root access with this method
Download stock Rom from sammobile extract and there should be 5 MD5 files extract the AP file with 7z and copied boot.img on to sdcard
Installed MagicalMmanager-7 used it to patch the boot.img to a tar file
Copied the boot image to my pc desktop then flashed the boot with odin
When I booted it back up magisk manager kept crashing so I uninstalled it and installed magiskmanager-5.23 rebooted it opened magisk and followed the prompts to update it
Click to expand...
Click to collapse
Hello there.
I have tried to patch my boot.img but when I put into a .tar and flash it, it doesn't flash, it's just stuck on file analysis despite being able to flash other files. Would you be able to send me a copy of your boot.img, thanks.
Kindest Regards
-Jayden
JaydenATC said:
Hello XDA!
I am writing this thread to ask for help rooting my Samsung Galaxy J2 Pro.
I attempted to use apps such as: Framaroot, Kingroot, etc.. but so far none of them have worked and I have not been able to find a working guide on the internet of how to root my phone.
I also tried installing an unofficial version of TWRP for my phone but everytime I tried to boot into the recovery it would say "No Command" and then boot into the original recovery.
Is anyone able to help me root my phone? Can it even be done?
Any help is sincerely appreciated. Thanks!
Phone Specifications:
Samsung Galaxy J2 Pro.
SM-J250G
Android Version: 7.1.1
Click to expand...
Click to collapse
Hi Jayden
I've got exactly the same problem. Have you worked this out eventually? Please help!
MC
qichen said:
Hi Jayden
I've got exactly the same problem. Have you worked this out eventually? Please help!
MC
Click to expand...
Click to collapse
Unfortunately I have not found a solution. Please notify me if you find one.
here is a copy of my boot.img after flashing this you will get a verification problem and you will have to reset your phone if it bootloops into recovery or starts to update and says no command take battery out put it back in and boot it again or boot in to odin mode and push down and boot it eventually it will boot in to recovery then factory reset it. first boot may take 5-10 minutes
my software version is J250GDXU2ARD3_J250GXSA2ARD3_XSA
putzwon said:
here is a copy of my boot.img after flashing this you will get a verification problem and you will have to reset your phone if it bootloops into recovery or starts to update and says no command take battery out put it back in and boot it again or boot in to odin mode and push down and boot it eventually it will boot in to recovery then factory reset it. first boot may take 5-10 minutes
my software version is J250GDXU2ARD3_J250GXSA2ARD3_XSA
Click to expand...
Click to collapse
Hello and thanks a lot! I flashed my boot image and now when it boots it says "Set Warranty Bit : Kernel" and an infinite booting screen.
What do I do from here? or do I need to flash the original rom?
don't worry about "Set Warranty Bit : Kernel" mine does it too here is another boot.img after i flashed this i got verification failed so i used 7z to tar userdata.img.ext4 i extracted from the AP image i got the boot.img from.
i put boot in BL and userdata in AP and flashed it. it fired up as normal and then i installed magisk apk
JaydenATC said:
Hello and thanks a lot! I flashed my boot image and now when it boots it says "Set Warranty Bit : Kernel" and an infinite booting screen.
What do I do from here? or do I need to flash the original rom?
Click to expand...
Click to collapse
Flash the original rom then flash boot and userdata as i explain in next post
Hey, sorry for the late response. Everything is working fine! I now have superuser abilities but everytime I try to flash my recovery with TWRP it just loads the stock recovery. I even tried removing certain files from the root folder to avoid the stock recovery being flashed but it hasn't worked.
Any idea? Ps. You are a life saver my man.
JaydenATC said:
Hey, sorry for the late response. Everything is working fine! I now have superuser abilities but everytime I try to flash my recovery with TWRP it just loads the stock recovery. I even tried removing certain files from the root folder to avoid the stock recovery being flashed but it hasn't worked.
Any idea? Ps. You are a life saver my man.
Click to expand...
Click to collapse
glad i could help and i don't think there is an official twrp for this device here is one i ported a couple things still don't work mtp and sideload but it's not really usable until someone ports a rom due to the data encryption which you have to format to be able to flash anything
putzwon said:
glad i could help and i don't think there is an official twrp for this device here is one i ported a couple things still don't work mtp and sideload but it's not really usable until someone ports a rom due to the data encryption which you have to format to be able to flash anything
Click to expand...
Click to collapse
Hello,
Sorry, I don't have the J250G anymore as I traded it for a J5.
Kindest Regards
Jayden
My internal storage showed I only have 8gb instead of 16gb. Is there a fix for this?
P.S. Wiping data fixes it
ok
You can extract it from the AP file from stock firmware using 7z
hey
hey everyone im just wondering but is there a kernel for this device yet or any rom ("J250G")
Hello,
i was on EMUI 9 with my BKL-L09 and decided to give the custom roms a new try.
So i backed up my recovery_ramdisk (it was rooted with magisk before) and then flashed twrp (version 3.2.3-3).
Now i went for Wipe>format data and gave it a try. Result: it was hanging after makefs->(..) done. So i done the whole procedure again but it was still hanging.
Now i can't get back into twrp, because only the twrp bootscreen is showing up. Even after restoring my recovery_ramdisk backup with fastboot i can't get back into erecovery Is there anything i can do?
Thanks.
Ok, i solved this by myself through downloading the full ota update, extracting everything and flashing new kernel, system and recovery from ota update contents.
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
jesusdoar said:
Can you put the CMD lines to do it?
Thank you anyway. I think i have the same problem.
Click to expand...
Click to collapse
I don't have this smartphone anymore but i remember the following:
1. Download the Full OTA Zip (e.g. here: https://www.getdroidtips.com/huawei...-update-for-honor-view-10-download-available/
2. Use the Huawei Update Extractor to extract the partitions from the content in the zip file. (https://forum.xda-developers.com/showthread.php?t=2433454)
3. Flash the partitions over the existing ones on your V10 using fastboot "fastboot flash recovery_ramdisk recovery_ramdisk.img , ...) - these contents are inside the full ota package
Greetings
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Brodelpiet said:
Did it work out for you?
You can also try to flash the original erecovery using fastboot und use the download option inside the Recovery App. This will reset all partitions back to default. But also all data is lost.
Click to expand...
Click to collapse
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
jesusdoar said:
it works thank you, now the problem is that the erecovery doesn´t download the package to flash.
Click to expand...
Click to collapse
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Brodelpiet said:
Did you just flash the erecovery or also the normal recovery partition und Kernel from the zip? What kind of error do you get?
Click to expand...
Click to collapse
Yeah i flashed the kernel and the recovery ramdisk. And now it boots into erecovery, but inside the erecovery, the option to download and install the last version of emui doesn´t work, it just shows an error that it can´t get the package info.
thanks for your attention.
greets