Hey,
I was wondering if it's possible to root the mate 10 pro without unlocking the bootloader.
Since huawei is not giving the bootloader codes anymore, and i have the latest updates so dc unlocker isn't an option either.
Trickbe said:
Hey,
I was wondering if it's possible to root the mate 10 pro without unlocking the bootloader.
Since huawei is not giving the bootloader codes anymore, and i have the latest updates so dc unlocker isn't an option either.
Click to expand...
Click to collapse
What build are you on?
BLA-Lx9CxxxBxxx
Rooting is not possible without unlocking bootloader.
ante0 said:
What build are you on?
BLA-Lx9CxxxBxxx
Rooting is not possible without unlocking bootloader.
Click to expand...
Click to collapse
My build number is BLA-L29 8.0.0.145 (C432)
Thank you for the reply.
Trickbe said:
My build number is BLA-L29 8.0.0.145 (C432)
Thank you for the reply.
Click to expand...
Click to collapse
FOR OTHERS SEEING THIS, IT WILL NOT WORK ON B146 OR GREATER (02 XLOADER). (B148-SP1 being the exception as it has 01 XLOADER)
FOR OTHER CUST THAN C432 CHECK THIS THREAD ON HOW TO CHECK YOUR XLOADER: https://forum.xda-developers.com/mate-10/how-to/beware-bla-l29c432b147-t3817241
Great. You can downgrade to B142 and get unlock code through DC/HCU.
You will need a USB-C to USB-A female OTG cable, or USB-C to Hub and a memory stick (8GB minimum)/sdcard adapter + sdcard (8GB minimum).
Backup your phone with Backup app and internal SD (If you want to of course) as it says the dload will format /data (I'm not sure if it actually does it as I had to format manually from stock recovery, but when I tested I went from B148-SP1 to B142 so the big gap might have caused /data to not want to load correctly).
Download this dload package (BLA-L29C432B142): https://mega.nz/#!vXZRnAbI!pYBwcPATQKyxB-Et74StI-3H7tsytbo2xheIQdTCGKU
Extract zip and go in to the 'Software' folder, copy 'dload' folder to the root of your memory stick/sdcard. (do not extract the update_sd.zip in the dload folder, it's supposed to be zipped)
Plug in memory stick/sdcard in your OTG-cable/Hub and USB-C in your phone and go to dialer app and enter: *#*#2846579#*#*, tap on "4. Software Upgrade", then on "1. SDCard upgrade". Tap on "OK" then install anyway when/if it says "PT Failed".
You can also force dload update by holding power + volume up + volume down with USB OTG/Hub plugged in.
Phone will reboot and start verifying package, this takes a while. Then it will start installing.
If it starts bootlooping after the white Huawei logo, go to stock recovery (Power + volume up) and Factory reset. Booting the first time after downgrade will take a little bit so only factory reset if it takes 5+ mins.
When you are booted use DC/HCU to get unlock code. I had to install drivers from their support section to get it working, else it wouldn't recognize phone.
Alternatively you could probably use Funky Huawei to downgrade to B142, but it's expensive.
ante0 said:
FOR OTHERS SEEING THIS, IT WILL NOT WORK ON B146 OR GREATER (02 XLOADER). (B148-SP1 being the exception as it has 01 XLOADER)
FOR OTHER CUST THAN C432 CHECK THIS THREAD ON HOW TO CHECK YOUR XLOADER: https://forum.xda-developers.com/mate-10/how-to/beware-bla-l29c432b147-t3817241
Great. You can downgrade to B142 and get unlock code through DC/HCU.
You will need a USB-C to USB-A female OTG cable, or USB-C to Hub and a memory stick (8GB minimum)/sdcard adapter + sdcard (8GB minimum).
Backup your phone with Backup app and internal SD (If you want to of course) as it says the dload will format /data (I'm not sure if it actually does it as I had to format manually from stock recovery, but when I tested I went from B148-SP1 to B142 so the big gap might have caused /data to not want to load correctly).
Download this dload package (BLA-L29C432B142): https://mega.nz/#!vXZRnAbI!pYBwcPATQKyxB-Et74StI-3H7tsytbo2xheIQdTCGKU
Extract zip and go in to the 'Software' folder, copy 'dload' folder to the root of your memory stick/sdcard. (do not extract the update_sd.zip in the dload folder, it's supposed to be zipped)
Plug in memory stick/sdcard in your OTG-cable/Hub and go to dialer app and enter: *#*#2846579#*#*, tap on "4. Software Upgrade", then on "1. SDCard upgrade". Tap on "OK" then install anyway when/if it says "PT Failed".
You can also force dload update by holding power + volume up + volume down with USB OTG/Hub plugged in.
Phone will reboot and start verifying package, this takes a while. Then it will start installing.
If it starts bootlooping after the white Huawei logo, go to stock recovery (Power + volume up) and Factory reset. Booting the first time after downgrade will take a little bit so only factory reset if it takes 5+ mins.
When you are booted use DC/HCU to get unlock code. I had to install drivers from their support section to get it working, else it wouldn't recognize phone.
Alternatively you could probably use Funky Huawei to downgrade to B142, but it's expensive.
Click to expand...
Click to collapse
Ok great! Thanks so much!
My emui version says C185 can I use the second method to unlock bootloader and root
Sent from my BLA-L29 using Tapatalk
amith311 said:
My emui version says C185 can I use the second method to unlock bootloader and root
Sent from my BLA-L29 using Tapatalk
Click to expand...
Click to collapse
Yes, but you will need to find dload firmware for C185.
You should be able to use "BLA-L29C 8.0.0.135(C185)" (Search with that exact text on androidhost.ru), it's from April.
I don't trust the B133, too many versions use B133, but I did download B135 just now and have checked that it is April patch.
For BLA the USB-C to USB A female OTG cable/USB-C hub is required as we don't have any external sd. Placing it on /sdcard/ does nothing
Downgrade from B145 to B142 ?
Trickbe said:
Ok great! Thanks so much!
Click to expand...
Click to collapse
Small question: if you succeed to downgrade from b145 to b142, what do you do after ? Is OTA still working for example ?
a029159 said:
Small question: if you succeed to downgrade from b145 to b142, what do you do after ? Is OTA still working for example ?
Click to expand...
Click to collapse
OTA will be offered directly, it wanted me to update to B145 again (Which is the latest approved fw for me).
But get unlock code off of DC/HCU before updating, otherwise you'd have to downgrade again
ante0 said:
OTA will be offered directly, it wanted me to update to B145 again (Which is the latest approved fw for me).
But get unlock code off of DC/HCU before updating, otherwise you'd have to downgrade again
Click to expand...
Click to collapse
I really don't see the interest to downgrade to b142 from b145 if just after OTA upgrade to b145 again ? Who is able to explain ??
a029159 said:
I really don't see the interest to downgrade to b142 from b145 if just after OTA upgrade to b145 again ? Who is able to explain ??
Click to expand...
Click to collapse
You can't get bootloader unlock code from DC/HCU on B145+, downgrade to B142 and you can.
I did write it in my original post and in the reply to you.
ante0 said:
You can't get bootloader unlock code from DC/HCU on B145+, downgrade to B142 and you can.
I did write it in my original post and in the reply to you.
Click to expand...
Click to collapse
Thank you. Now it's more clear. So if you already have your code before having update to b145, it's not usefull.
a029159 said:
Thank you. Now it's more clear. So if you already have your code before having update to b145, it's not usefull.
Click to expand...
Click to collapse
Exactly. Well, it would be useful if you never saved your code or rebranded using FH Rebrand tool as well, as that changes your unlock code.
However. If you are on, for example, C432B146 you won't be able to downgrade at all.
Im on .142 now and got my unlock code from dcu. Can i install ota updates without problems with unlocked bootloader? And is there anyway to flashing stock rom without relocking bootloader? One last question if i can update to 145+ after unlocking can i root it too?
Hamsi3434 said:
Im on .142 now and got my unlock code from dcu. Can i install ota updates without problems with unlocked bootloader? And is there anyway to flashing stock rom without relocking bootloader? One last question if i can update to 145+ after unlocking can i root it too?
Click to expand...
Click to collapse
You will get updates yes, but to install them normally you need to flash back stock recovery if you have TWRP.
Normally bootloader is not locked after flashing stock firmware, if that's what you mean? Yes, you can root fine on B146ä5+
ante0 said:
You will get updates yes, but to install them normally you need to flash back stock recovery if you have TWRP.
Normally bootloader is not locked after flashing stock firmware, if that's what you mean? Yes, you can root fine on B146ä5+
Click to expand...
Click to collapse
Thank you. I asked will otas lock my bootloader bcz u know with .145 update they did smh that prevent unlocking.
Hamsi3434 said:
Thank you. I asked will otas lock my bootloader bcz u know with .145 update they did smh that prevent unlocking.
Click to expand...
Click to collapse
It prevents getting unlock code from DC/HCU. If you already have code you will be fine (For now anyway)
ante0 said:
FOR OTHERS SEEING THIS, IT WILL NOT WORK ON B146 OR GREATER (02 XLOADER). (B148-SP1 being the exception as it has 01 XLOADER)
FOR OTHER CUST THAN C432 CHECK THIS THREAD ON HOW TO CHECK YOUR XLOADER: https://forum.xda-developers.com/mate-10/how-to/beware-bla-l29c432b147-t3817241
Great. You can downgrade to B142 and get unlock code through DC/HCU.
You will need a USB-C to USB-A female OTG cable, or USB-C to Hub and a memory stick (8GB minimum)/sdcard adapter + sdcard (8GB minimum).
......
Click to expand...
Click to collapse
THANK YOU SO MUCH FOR THIS!!!
I have just got my bootloader code for my Mate 10 Pro that came with 145 after downgrading to 142 using your instructions and software
Related
hi,i have a mate 10 pro with stock android 8, unlocked bootloader by flashing unlock key via fastboot. frp unlocked.
stock recovery. not rooted.
bla-l29 c432 131
when i start my mate 10 it says "device cannot be trusted".. before it boots as normal.
Can i lock\relock bootloader and make it go away??
tried:
fastboot oem relock "unlock code"
fastboot oem lock "unlock code"
and it came password failed :\
usb debugging: on
oem unlock: on
flash oem info of sorts?
try: fastboot reboot oem relock?
if i switch oem unlock to off again in developers option and then use commands??
Thanks for help!
FiXed, used adb interface drivers, i tried several until i found 1 that worked
Hi, with mate 8 and mate 9 when you flash officiel firmware he relock bootloader, try this or you can buy credit (4) for relock with DC unlocker.
So... tell me please why you unlock your bootloader if you don't flash twrp or root ??
Dont buy any credit. I Will provide you The solution today.
---------- Post added at 05:49 AM ---------- Previous post was at 05:03 AM ----------
614Emil said:
hi,i have a mate 10 pro with stock android 8, unlocked bootloader by flashing unlock key via fastboot. frp unlocked.
stock recovery. not rooted.
bla-l29 c432 131
Click to expand...
Click to collapse
Use this tutorial (flash update)
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
In short:
- download your full firmware (3 files)
- in repack part chose to lock bootloader
- ota part
End of story.
badmania98 said:
Dont buy any credit. I Will provide you The solution today.
---------- Post added at 05:49 AM ---------- Previous post was at 05:03 AM ----------
Use this tutorial (flash update)
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
In short:
- download your full firmware (3 files)
- in repack part chose to lock bootloader
- ota part
End of story.
Click to expand...
Click to collapse
Thanks, I will try this later and let you know how it goes!
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Lykeul said:
Hi, with mate 8 and mate 9 when you flash officiel firmware he relock bootloader, try this or you can buy credit (4) for relock with DC unlocker.
So... tell me please why you unlock your bootloader if you don't flash twrp or root ??
Click to expand...
Click to collapse
hi aok ill look into that plan was getting viper or some good sound mod, but it seems its not finished developed for Oreo 8.0
Buran79 said:
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
it did not work :\
614Emil said:
it did not work :\
Click to expand...
Click to collapse
did you try info.bat? does it restart to fastboot mode so you can see the bootloader status?
what method or tool did you use to unlock de bootloader?
Buran79 said:
did you try info.bat? does it restart to fastboot mode so you can see the bootloader status?
what method or tool did you use to unlock de bootloader?
Click to expand...
Click to collapse
i have to set it in fastboot manually then it shows:
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
BLA-L29 8.0.0.131(C432)
Product model:
BLA-L29
to unlock i used cmd and -fastboot oem unlock "code"-
Buran79 said:
If you only want to relocked your bootloader just use the HWOTA8_Mate 10 tool from the link bellow.
download the tool > go to lock directory > use relock.bat
you'll need to provide your bootloader unlock code to re-locked it.
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
hi^^ did not work either, after i put in the "code" in the cmd window,i can see Failed before the cmd window quickly dissapears
614Emil said:
hi^^ did not work either, after i put in the "code" in the cmd window,i can see Failed before the cmd window quickly dissapears
Click to expand...
Click to collapse
I think you are not having proper mate 10 pro windows drivers. Try following the HWOTA_mate10 guide about preparation, there is a registry fix and you should uninstall HiCare for proper device recognition
Buran79 said:
I think you are not having proper mate 10 pro windows drivers. Try following the HWOTA_mate10 guide about preparation, there is a registry fix and you should uninstall HiCare for proper device recognition
Click to expand...
Click to collapse
Hi, i just started thinking about that, just to be sure since i did not get mtp folder in my computer anymore(win 10)
i switched to my laptop win 8.1,
installed the adb driver manually as adb composite interface in normal mtp\debug phone on.
in fastboot the driver said adb sooner single interface
and then when i am supposed to switch inn to the stock recovery modded with adb support,
i get 3 devies with yellow ! in device manager:
1. huawei- device properties and details then choose bus reported device description: huawei
2. unknown device: - device properties and details then choose bus reported device description: adb interface
3. unknown device: - device properties and details then choose bus reported device description: hdb interface
what should i set these to manually?
i am trying to use "flash update" in HWOTA_mate10 guide and i am on step D run ota.
supposed to switch from fastboot to recovery then the script waits for adb connection
Did you disable oem unlocking in developer options?
EngrVan said:
Did you disable oem unlocking in developer options?
Click to expand...
Click to collapse
no, but i just fixed it!
it showed adb interface, i tried different android drivers\adb drivers, found the right combo inn the end
Bootloader Unlock not possible - but eRecovery working
@ante0
I have Mate 10 BLA-L09c432 and installed latest Firmware 8.0.0.157 since two days. I updated with official OTA.
Before I had 8.0.0.137 → on that Firmware I read the Bootloader Unlock Code with DC Unlocker → and I got a new Unlock Code.
The originial Unlock Code did not work anymore (Phone was from a friend of mine and bricked and I restored it by FunkyHuawei - and bought it).
I unlocked the Bootloader with the new Code (read by DC) and it worked.
Two days ago I decided to update with OTA. I reflashed the original recovery_ramdisk and ramdisk.img. Update was succesful.
→ I tried to relock the Bootloader (because I am thinking about to sell the phone) → and it does not work! Not with the originial Code, not with the new Code (read on b137)
I did nothing wrong, because this year I unlocked about 40 devices (because I am helping to repair bricked phones from Users of Android Hilfe de) and I know very well how to do. (OEM Unlock enabled, ADB Debugging and USB Debugging enabled, HiSuite HDB disabled, HiSuite on PC closed, ADB and Fastboot working....)
Code:
fastboot oem relock UNLOCKCODE
does not work
But I have no idea yet how to relock the Loader I will try once more - but perhaps you or someone has an idea?
So perhaps I should just be happy to have a unlocked Phone and keep it instead of selling it....
Everything else is working.
And I found out some interesting point → seems Huawei started to bring the Feature of eRecovery even to European Versions of his Phones (from a certain firmware version)
I booted to Huawei eRecovery and "Download latest version and Recovery" is running without FunkyHuawei
Tecalote said:
@ante0
I have Mate 10 BLA-L09c432 and installed latest Firmware 8.0.0.157 since two days. I updated with official OTA.
Before I had 8.0.0.137 → on that Firmware I read the Bootloader Unlock Code with DC Unlocker → and I got a new Unlock Code.
The originial Unlock Code did not work anymore (Phone was from a friend of mine and bricked and I restored it by FunkyHuawei - and bought it).
I unlocked the Bootloader with the new Code (read by DC) and it worked.
Two days ago I decided to update with OTA. I reflashed the original recovery_ramdisk and ramdisk.img. Update was succesful.
→ I tried to relock the Bootloader (because I am thinking about to sell the phone) → and it does not work! Not with the originial Code, not with the new Code (read on b137)
I did nothing wrong, because this year I unlocked about 40 devices (because I am helping to repair bricked phones from Users of Android Hilfe de) and I know very well how to do. (OEM Unlock enabled, ADB Debugging and USB Debugging enabled, HiSuite HDB disabled, HiSuite on PC closed, ADB and Fastboot working....)
does not work
But I have no idea yet how to relock the Loader I will try once more - but perhaps you or someone has an idea?
So perhaps I should just be happy to have a unlocked Phone and keep it instead of selling it....
Everything else is working.
And I found out some interesting point → seems Huawei started to bring the Feature of eRecovery even to European Versions of his Phones (from a certain firmware version)
I booted to Huawei eRecovery and "Download latest version and Recovery" is running without FunkyHuawei
Click to expand...
Click to collapse
Use the DLOAD method with the B150 firmware from androidhost.ru, that should lock (not relock) it.
Pretoriano80 said:
Use the DLOAD method with the B150 firmware from androidhost.ru, that should lock (not relock) it.
Click to expand...
Click to collapse
Thanks Mate :good:
So I have just to check the Xloader thing before
Tecalote said:
Thanks Mate :good:
So I have just to check the Xloader thing before
Click to expand...
Click to collapse
B150 from androidhost.ru is xloader 2, which build do you have now?
Pretoriano80 said:
B150 from androidhost.ru is xloader 2, which build do you have now?
Click to expand...
Click to collapse
I have b157 (latest Firmware for c432, installed with official OTA (Full) from b137 to b157)
Tecalote said:
I have b157 (latest Firmware for c432, installed with official OTA (Full) from b137 to b157)
Click to expand...
Click to collapse
Then you can use B150 to downgrade with DLOAD method. That should reset the phone and lock the bootloader, to fabric condition.
i am getting a brand new huawei mate 10 pro returning my current brand new one as it got updated to the latest emui which prevents bootloader unlocking, how do i succesfully unlock the bootloader on the next mate 10 pro?
1.how do i prevent it from updating and ruining my chances of unlocking the bootloader Before i have a chance to unlock it, will it force update?
2.how do i keep the bootloader locked will i have to flash some other rom on it to prevent it from updating ota or can i update it ota and keep the bootloader unlocked with twrp or will it be permanently locked if i attempt to ota update after twrp is installed and after the bootloader is unlocked
3.i read that it can restore the default recovery on first boot can anyone explain this to me
since the latest emui prevents the bootloader from being unlocked i only have one chance, and if it somehow updates to the latest emui then it's locked forever, so how do i unlock the bootloader permanently without worrying about it unlocking ever again, i thought that once the bootloader is unlocked and twrp is installed then it will stay like that, but then i read that it can get overitten just with an ota update and once it updates then i can never unlock it again.
zzcool said:
i am getting a brand new huawei mate 10 pro returning my current brand new one as it got updated to the latest emui which prevents bootloader unlocking, how do i succesfully unlock the bootloader on the next mate 10 pro?
1.how do i prevent it from updating and ruining my chances of unlocking the bootloader Before i have a chance to unlock it, will it force update?
2.how do i keep the bootloader locked will i have to flash some other rom on it to prevent it from updating ota or can i update it ota and keep the bootloader unlocked with twrp or will it be permanently locked if i attempt to ota update after twrp is installed and after the bootloader is unlocked
3.i read that it can restore the default recovery on first boot can anyone explain this to me
since the latest emui prevents the bootloader from being unlocked i only have one chance, and if it somehow updates to the latest emui then it's locked forever, so how do i unlock the bootloader permanently without worrying about it unlocking ever again, i thought that once the bootloader is unlocked and twrp is installed then it will stay like that, but then i read that it can get overitten just with an ota update and once it updates then i can never unlock it again.
Click to expand...
Click to collapse
1. Set up device, but don't plug in SIM or enable WiFi. Go to settings and check patch level.
Depending on Cust of course, but generally July or later can't be downgraded (If downgrade is needed). This is due to updated bootloader.
If May/June or earlier you should be able to use HCU-client directly to get unlock code.
For example, BLA-L29C432B145 (June) can be downgraded to B142 (May) where HCU works. This is using dload firmware from androidhost.ru (requires an OTG-cable and USB-stick 8gb min or a OTG usb hub and USB-stick 8gb min).
B146+ can't be downgraded to old bootloader due to updated bootloader.
2. When you have the unlock code you can use it, always, no matter what firmware (At least as it is now, this might change in the future)
Firmware don't normally lock bootloader.
3. To restore stock recovery you would either:
Extract it from your firmwares update.app, acquired from firmware finder. This is extracted using Huawei Update Extractor.
Stock recovery is named recovery_ramdisk and can be flashed through fastboot.
OR
You can 'dd' erecovery_ramdisk to recovery_ramdisk (both partitions are the same, different 'entry' points). This is using terminal in TWRP
dd if=/dev/block/bootdevice/by-name/erecovery_ramdisk of=/dev/block/bootdevice/by-name/recovery_ramdisk
I would suggest using the update.app approach if you're not comfortable using terminal. 'dd' is a potentially dangerous command.
But your device should ship with an already HCU compatible firmware, so you should be able to get code right away, as long as you don't connect to the internet first.
ante0 said:
1. Set up device, but don't plug in SIM or enable WiFi. Go to settings and check patch level.
Depending on Cust of course, but generally July or later can't be downgraded (If downgrade is needed). This is due to updated bootloader.
If May/June or earlier you should be able to use HCU-client directly to get unlock code.
For example, BLA-L29C432B145 (June) can be downgraded to B142 (May) where HCU works. This is using dload firmware from androidhost.ru (requires an OTG-cable and USB-stick 8gb min or a OTG usb hub and USB-stick 8gb min).
B146+ can't be downgraded to old bootloader due to updated bootloader.
2. When you have the unlock code you can use it, always, no matter what firmware (At least as it is now, this might change in the future)
Firmware don't normally lock bootloader.
3. To restore stock recovery you would either:
Extract it from your firmwares update.app, acquired from firmware finder. This is extracted using Huawei Update Extractor.
Stock recovery is named recovery_ramdisk and can be flashed through fastboot.
OR
You can 'dd' erecovery_ramdisk to recovery_ramdisk (both partitions are the same, different 'entry' points). This is using terminal in TWRP
dd if=/dev/block/bootdevice/by-name/erecovery_ramdisk of=/dev/block/bootdevice/by-name/recovery_ramdisk
I would suggest using the update.app approach if you're not comfortable using terminal. 'dd' is a potentially dangerous command.
But your device should ship with an already HCU compatible firmware, so you should be able to get code right away, as long as you don't connect to the internet first.
Click to expand...
Click to collapse
can i set it up without a Connection? from what i remember setting it up the first time it forced me to connect to the internet, as for unlocking that seems really complicated, from what i saw i can use dc unlocker with the click of a few buttons so i don't quite understand these methods, so you mean this is better than dc unlocker, does that mean once i get the code i can update emui and relock the bootloader and then unlock it? no need for any software or anything once i have the code then it's like an official code so i never have to worry about not being able to unlock the bootloader again can i then unlock the bootloader no matter how new emui if i want, and what firmware will it have if it comes brand new should it have the firmware it shipped with on release?
let's say the phone comes with Before may security patch can i then easily just get the code without much complication and then it's the same code as if i were to get it directly from huawei meaning i don't have to worry about updating emui and having the bootloader locked permanently? this is all news to me as i thought you needed to use dc unlocker as a workaround and that this only works on older emui meaning if i unlock the bootloader update emui then it's locked forever.
zzcool said:
can i set it up without a Connection? from what i remember setting it up the first time it forced me to connect to the internet, as for unlocking that seems really complicated, from what i saw i can use dc unlocker with the click of a few buttons so i don't quite understand these methods, so you mean this is better than dc unlocker, does that mean once i get the code i can update emui and relock the bootloader and then unlock it? no need for any software or anything once i have the code then it's like an official code so i never have to worry about not being able to unlock the bootloader again can i then unlock the bootloader no matter how new emui if i want, and what firmware will it have if it comes brand new should it have the firmware it shipped with on release?
let's say the phone comes with Before may security patch can i then easily just get the code without much complication and then it's the same code as if i were to get it directly from huawei meaning i don't have to worry about updating emui and having the bootloader locked permanently? this is all news to me as i thought you needed to use dc unlocker as a workaround and that this only works on older emui meaning if i unlock the bootloader update emui then it's locked forever.
Click to expand...
Click to collapse
Hcu-Client is made by DC-Unlocker, but it works for newer phones. Its the same procedure as using DC-Unlocker, and uses the same credits. Just follow the instructions found in the program.
The downgrade would only be needed it your firmware is higher than the supported ones, and still on old bootloader.
I can't say for sure the unlock code will work for all eternity, but at least for now it will work after you update (and if phone for some reason locks after update).
If it works or not on future firmware is up to Huawei. My phone stayed unlocked when flashing Pie beta anyway....
When you have the code you it will be like the official one, so keep it somewhere safe.
I'm pretty sure you can skip through the whole set up without connecting to the Internet.
I can't remember what firmware my phone came with, it might have been on C432B127 or C432B129...
DC unlocker/HCU is only to get the unlock code as Huawei closed their site to get it. You can safely update after getting it.
ante0 said:
Hcu-Client is made by DC-Unlocker, but it works for newer phones. Its the same procedure as using DC-Unlocker, and uses the same credits. Just follow the instructions found in the program.
The downgrade would only be needed it your firmware is higher than the supported ones, and still on old bootloader.
I can't say for sure the unlock code will work for all eternity, but at least for now it will work after you update (and if phone for some reason locks after update).
If it works or not on future firmware is up to Huawei. My phone stayed unlocked when flashing Pie beta anyway....
When you have the code you it will be like the official one, so keep it somewhere safe.
I'm pretty sure you can skip through the whole set up without connecting to the Internet.
I can't remember what firmware my phone came with, it might have been on C432B127 or C432B129...
DC unlocker/HCU is only to get the unlock code as Huawei closed their site to get it. You can safely update after getting it.
Click to expand...
Click to collapse
oh so no need for a Cable or anything after i received the code, once i received it on the appropriate firmware then i can update emui, this means anything i do doesn't do anything to the phone itself, i don't need to do any modification on my phone i just use it to get the code then i update emui like normal and then when i feel like it i unlock the bootloader with the code, so i can get the code and just forget about it afterwards unless huweai invalidates it in the future?
simply put
1.i unbox the phone and set it up with no sim card or internet skip all logins
2.i connect it to a pc and get the code through hcu however that is done
3. i reset the phone and set it up like i normally would with internet and a simcard and then update it ota
then when i feel like it i can unlock the bootloader on the newest firmware and then install a custom rom
Hello guys, I need to read bootloader code in my mate 10 pro with dc-unlocker but they write in the site "Huawei Mate 10 Pro BLA-xxx upgraded to Android 8x not supported".. what do they main? Mate 10 pro was launched with android 8.0
Inviato dal mio ASUS_T00J utilizzando Tapatalk
L3onX said:
Hello guys, I need to read bootloader code in my mate 10 pro with dc-unlocker but they write in the site "Huawei Mate 10 Pro BLA-xxx upgraded to Android 8x not supported".. what do they main? Mate 10 pro was launched with android 8.0
Inviato dal mio ASUS_T00J utilizzando Tapatalk
Click to expand...
Click to collapse
It means it's not supported since May/June. I guess they just write that so they don't have to investigate into which firmware exactly.
It works on May patch firmware and earlier. Some cust even works on June.
Since your signature is Italian I guess you have C432?
If so, last build it worked on was B142. If you're on B145 you can downgrade to B142. If you're on B146 or later you can't get unlock code. (at least for now)
ante0 said:
It means it's not supported since May/June. I guess they just write that so they don't have to investigate into which firmware exactly.
It works on May patch firmware and earlier. Some cust even works on June.
Since your signature is Italian I guess you have C432?
If so, last build it worked on was B142. If you're on B145 you can downgrade to B142. If you're on B146 or later you can't get unlock code. (at least for now)
Click to expand...
Click to collapse
My signature is Italian but I have buyed brand tim that should be C55. The phone is arriving today so i do not know the build yet...this brand is updated slower than the others so i hope to be in an old build
L3onX said:
My signature is Italian but I have buyed brand tim that should be C55. The phone is arriving today so i do not know the build yet...this brand is updated slower than the others so i hope to be in an old build
Click to expand...
Click to collapse
It most likely will be then. If its B133 or even B135 it should work with DC out of the box. Just don't update before getting code
ante0 said:
It most likely will be then. If its B133 or even B135 it should work with DC out of the box. Just don't update before getting code
Click to expand...
Click to collapse
Of course, I will set up the device without wifi and sim as suggested
NEWS: I've just received the phone. It is bla-l09 8.0.0.128(c55) with January patch. I can read the bootloader code using DC software without doing anithing else, right?
L3onX said:
Of course, I will set up the device without wifi and sim as suggested
NEWS: I've just received the phone. It is bla-l09 8.0.0.128(c55) with January patch. I can read the bootloader code using DC software without doing anithing else, right?
Click to expand...
Click to collapse
If DC-Unlocker doesn't work, use HCU-client. I can't remember if Mate 10 Pro is too new for DC-unlocker.
It's the same credits anyway, and it won't use credits if phone is not supported in DC-unlocker (You won't get the Bootloader code option anyway).
It may ask you to factory reset in HCU to get code, if it does just comply.
You will need 4 credits, which equals $4
i spoke to the developers of dc unlocker i was told they have no idea if the code will work after emui is updated, they suggest i unlock the bootloader as soon as i receive the code.
ante0 said:
If DC-Unlocker doesn't work, use HCU-client. I can't remember if Mate 10 Pro is too new for DC-unlocker.
It's the same credits anyway, and it won't use credits if phone is not supported in DC-unlocker (You won't get the Bootloader code option anyway).
It may ask you to factory reset in HCU to get code, if it does just comply.
You will need 4 credits, which equals $4
Click to expand...
Click to collapse
I've just gain my bootloader code in my mate 10 pro with DC-unlocker I confirm that it works perfectly with bla-l09 8.0.0.128(c55)! Can I update my smartphone and use the code in future when want? there is b137 now aviable. Thanks for the support
L3onX said:
I've just gain my bootloader code in my mate 10 pro with DC-unlocker I confirm that it works perfectly with bla-l09 8.0.0.128(c55)! Can I update my smartphone and use the code in future when want? there is b137 now aviable. Thanks for the support
Click to expand...
Click to collapse
Yes, it should work forever. I say should because it's Huawei and you never know if they decide to lock all unlocked phones and make the unlock codes invalid....
zzcool said:
i spoke to the developers of dc unlocker i was told they have no idea if the code will work after emui is updated, they suggest i unlock the bootloader as soon as i receive the code.
Click to expand...
Click to collapse
It should work in updated EMUI, atleast in Oreo.
What Huawei did, what I found out anyway, that made unlock code generation not working anymore is changing the key needed to generate it.
It's the same with the backdoor they use, it needs a new key to work. So technically all old unlock codes should work as the end result when generating an unlock code would be the same regardless of what key is needed to generate it. I guess anyway.
ante0 said:
Yes, it should work forever. I say should because it's Huawei and you never know if they decide to lock all unlocked phones and make the unlock codes invalid....
It should work in updated EMUI, atleast in Oreo.
What Huawei did, what I found out anyway, that made unlock code generation not working anymore is changing the key needed to generate it.
It's the same with the backdoor they use, it needs a new key to work. So technically all old unlock codes should work as the end result when generating an unlock code would be the same regardless of what key is needed to generate it. I guess anyway.
Click to expand...
Click to collapse
i just received the device it's on c3432 and Android 8.0 june patch can i unlock it?
zzcool said:
i just received the device it's on c3432 and Android 8.0 june patch can i unlock it?
Click to expand...
Click to collapse
B145?
If so you have to downgrade to B142, firmware is available on androidhost.ru.
You will also need an otg cable and a memory stick/usb adapter and minimum 8gb memory. (Samsungs USB-C to USB-A works fine for this if you happen to have one)
Or a USB hub.
Then extract your downloaded firmware zip, just cut and paste "sd_update" folder to external memory stick and start phone in dload mode.
There are instructions that come with the firmware on how you flash it (dload mode, folder structure etc.)
External memory is needed as Mate 10 Pro can't read internal while in recovery.
tried Reading bootloader code
2018-09-24 18:33:41.333 Autodetect COM port and phone type start!
2018-09-24 18:33:44.010 Found COM port: COM6
2018-09-24 18:33:44.017 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-09-24 18:33:44.149 Connecting to server...
2018-09-24 18:33:44.409 Connected!
2018-09-24 18:33:44.420 Open COM port COM6 (Android Adapter PCUI (COM6))...
Read bootloader code fail!
Not supported/unknown chipset!
so i guess thats it then?
wait you mean i can downgrade it?
bla l29 8.0.0.145 c432
and yeah i have that otg samsung adapter
so i download the firmware put the folder in the root of the usb stick and then simply downgrade?, will it still work after i attempted to get the bootloader code right now?
zzcool said:
tried Reading bootloader code
2018-09-24 18:33:41.333 Autodetect COM port and phone type start!
2018-09-24 18:33:44.010 Found COM port: COM6
2018-09-24 18:33:44.017 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-09-24 18:33:44.149 Connecting to server...
2018-09-24 18:33:44.409 Connected!
2018-09-24 18:33:44.420 Open COM port COM6 (Android Adapter PCUI (COM6))...
Read bootloader code fail!
Not supported/unknown chipset!
so i guess thats it then?
wait you mean i can downgrade it?
bla l29 8.0.0.145 c432
and yeah i have that otg samsung adapter
so i download the firmware put the folder in the root of the usb stick and then simply downgrade?, will it still work after i attempted to get the bootloader code right now?
Click to expand...
Click to collapse
Yes, just downgrade, get the unlock code and then unlock. It doesn't matter that you tried to get the code while on B145.
would you mind giving the most stupid easy to understand guide just to make it simpler for me so you mean it is certain i can do this.
zzcool said:
would you mind giving the most stupid easy to understand guide just to make it simpler for me so you mean it is certain i can do this.
Click to expand...
Click to collapse
Download this firmware - > http://androidhost.ru/3b5 <- and follow @ante0 advices for the downgrade procedure.
Can Anybody help me ?
I have a rooted and unlocked Mate 10 Pro.
But with the new Update , i can't downgrade Play Service.... I need this for a Game.
Now i need to downgrade to a lower version.
Thanks for help.
P.s.: I search in the Forum , but the most is search for downgrade from EMUI 8 to 7 or 9 to 8.
The lowest version you can downgrade to is B146 (Assuming you are on BLA-L29C432B156), using firmware from androidhost.ru.
OR flash images manually through TWRP, this way you could downgrade to first build if you wanted to xD
Just don't flash XLOADER.img as you are on new xloader. Flashing one from B145 or earlier will brick your phone.
ante0 said:
The lowest version you can downgrade to is B146 (Assuming you are on BLA-L29C432B156), using firmware from androidhost.ru.
OR flash images manually through TWRP, this way you could downgrade to first build if you wanted to xD
Just don't flash XLOADER.img as you are on new xloader. Flashing one from B145 or earlier will brick your phone.
Click to expand...
Click to collapse
For flash with TWRP you must need "BOOTLOADER UNLOCKED" and you know very wel that's service is Down from time.
So you guide NOT help for nothing.
vanito said:
For flash with TWRP you must need "BOOTLOADER UNLOCKED" and you know very wel that's service is Down from time.
So you guide NOT help for nothing.
Click to expand...
Click to collapse
Did I state otherwise? OP has an unlocked bootloader.
ante0 said:
Did I state otherwise? OP has an unlocked bootloader.
Click to expand...
Click to collapse
Ok sorry, haven't seen OP have unlocked bootloader.
Ok now i want do a question to you.
Sinche i've all professional tool for Extract and Flash also each single partition in Upgrade mode w/o unlocked bootloader, have one BLA-L09 C432 in B158.
If i flash the B143 C432 w/o Xloader partition, phone will not boot or boot having same B156 version?
My customer mistaked this device flashing Ram Disk, (Loader) + OEMINFO by TESTPOINT and have lost IMEI. So, i was searching a way for Downgrade and do Imei Repair, but there writed in all side that's impossible Downgrade from B156 or earlier...you have solution?
vanito said:
Ok sorry, haven't seen OP have unlocked bootloader.
Ok now i want do a question to you.
Sinche i've all professional tool for Extract and Flash also each single partition in Upgrade mode w/o unlocked bootloader, have one BLA-L09 C432 in B158.
If i flash the B143 C432 w/o Xloader partition, phone will not boot or boot having same B156 version?
My customer mistaked this device flashing Ram Disk, (Loader) + OEMINFO by TESTPOINT and have lost IMEI. So, i was searching a way for Downgrade and do Imei Repair, but there writed in all side that's impossible Downgrade from B156 or earlier...you have solution?
Click to expand...
Click to collapse
Easiest way, in my opinion, would be to just flash board firmware. Since he already has testpoint available?
Then you can repair imeis and that while on board using HCU. You can not get back original oeminfo though unless he has a backup of it.
But imeis that phone uses will be repaired, and you can still unlock using HCU's get unlock code button. Original code, if he got it through Huawei, will not be usable though.
Here's a guide for using HCU and steps to take, any deviation from these steps will result in no imei or no network.
1)Flash oeminfo (own backup) from fastboot
2)Backup modemnvm_system, modemnvm_factory and modemnvm_backup using adb pull from a command prompt (/dev/block/bootdevice/by-name/modemnvm_system and so on)
3)Flash backed up modemnvm_system, modemnvm_factory and modemnvm_backup from fastboot
3)Modify and brand with HCU (check everything but those that erase/flash empty board) (remember to fill vendor and cust)
4)Unlock sim with HCU
5)Read Bootloader code if you ever used HCU to get code before
6)Download and flash service firmware from androidhost.ru using a OTG cable and a memory stick
For step 1 you should be able to just backup and flash the existing oeminfo in phone as it's already using someone elses (DC's oeminfo flash will just download an oeminfo from their server and flash it, so you get someone elses oeminfo).
Here's just a quick guide of how I just successfully rooted my P10 (from android nougat)
Use this file (https://drive.google.com/open?id=1c1iQBvvP7zTUiKz5PZmlJUH5DKBxxC3L)
It has everything you need inside in one package. (I havent anything to do with the development of any of the tools, this is just my compilement of them)
1. BACK UP
Back up everything you can on you phone to your pc
2.Drivers
Easiest was is to install Huawei's HuSuite otherwise do a manual driver install
3.Get bootloader unlock code
This will cost 4eur but is now the only way to get the code since Huawei stopped providing the codes. I can verify DC unlocker are legit, their tools are scary powerful and well worth the cost. Follow the below tutorial for this.
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
4.Unlock the bootloader
On the phone enable developer mode (look this up its easy) and enable usb debugging and oem unlock. Then plug the phone into your pc and run cmd.exe inside the set folder. Enter the command without quotes "adb reboot bootloader". This will restart the phone in bootloader mode. Next enter the command "fastboot oem unlock CODE" with your code that you got from dc unlocker. This will restart the phone from factory so you will need to do a quick set up and enable developer settings and usb debigging again.
5. Installing custom recovery
Enter the bootloader mode again with "adb reboot bootloader". Then from the bootloader mode enter the command "fastboot flash recovery twrp-3.1.1-0-vtr.img" this will install twrp recovery.
6. Installing Magisk root
Copy the zip file Magisk-v17.1.zip onto an sd card and insert into the phone.
Restart the phone into system again and use "adb reboot recovery". This will start the phone into twrp recovery mode. From here go to install, navigate to the zip and install it.
7.Finishing
Then boot the phone and Magisk manager should be installed on your now rooted phone for managing you super user and root.
Any questions or help needed message me, or my email is in my set folder.
@Jyndon use MEGA or zip files and attach it to the thread. People won't download from this, since they need premium feature to download folder.
Yeah bro I need it plz
Enviado desde mi VTR-L09 mediante Tapatalk
What is Android version on your P10? My one is Oreo 8.0 and DC-Unlocker did not work. It showed "unknown error 375"
qlong1505 said:
What is Android version on your P10? My one is Oreo 8.0 and DC-Unlocker did not work. It showed "unknown error 375"
Click to expand...
Click to collapse
I think we are out of luck I was just asked for 30 euros to get the bootloader unlocked as I am also on 8.0
On DC-Unlocker page it says:
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Not sure if downgrading and then unlocking would make sense...
velvel said:
I think we are out of luck I was just asked for 30 euros to get the bootloader unlocked as I am also on 8.0
On DC-Unlocker page it says:
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Not sure if downgrading and then unlocking would make sense...
Click to expand...
Click to collapse
Hi,
it's possible downgrading to previous version or to Nougat without unlocking bootloader first? Pheraps you mean forcing update via microsd slot?
Thank you
[email protected]
[email protected] said:
Hi,
it's possible downgrading to previous version or to Nougat without unlocking bootloader first? Pheraps you mean forcing update via microsd slot?
Thank you
[email protected]
Click to expand...
Click to collapse
Here is what I know so far:
1. You do not necessary to be on Nougat to unlock the bootloader, you should be able to unlock it if your firmware is before June patch
2. If you are on firmware after June patch, you would first need to rollback/downgrade to pre June firmware by finding previous firmware
3. Rolling back from after June patch to previous firmware might brick your phone
Currently, I did not find a way to unlock the bootloader on C654B327 as I cannot find any pre June firmware for my branding (C654) and rebranding to some other (C432) cannot be done without unlocked bootloader. And so far I did not hear of anyone downgrading and unlocking from C654B327 so I am a bit afraid I could brick my phone.
Guess I will wait and see if there are any good news in the future...
velvel said:
I think we are out of luck I was just asked for 30 euros to get the bootloader unlocked as I am also on 8.0
On DC-Unlocker page it says:
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Not sure if downgrading and then unlocking would make sense...
Click to expand...
Click to collapse
I'm not suggesting to unlock the bootloader with DC, you should be able to do that normally with adb the same as you would on nougat
Jyndon said:
I'm not suggesting to unlock the bootloader with DC, you should be able to do that normally with adb the same as you would on nougat
Click to expand...
Click to collapse
The problem is getting the unlock code wont work to
qlong1505 said:
What is Android version on your P10? My one is Oreo 8.0 and DC-Unlocker did not work. It showed "unknown error 375"
Click to expand...
Click to collapse
I was on nougat when I wrote this guide. Maybe try rolling back to android 7.0 to get the bootloader code then upgrade again after. To do this I'm assuming you might be able to use some dload method perhaps.
Jyndon said:
I was on nougat when I wrote this guide. Maybe try rolling back to android 7.0 to get the bootloader code then upgrade again after. To do this I'm assuming you might be able to use some dload method perhaps.
Click to expand...
Click to collapse
True, if he hasn't latest security patch installed. With patch from Dec 2018 it seems that Huawei introduced something new so you can't roll back even with dload method
[email protected] said:
True, if he hasn't latest security patch installed. With patch from Dec 2018 it seems that Huawei introduced something new so you can't roll back even with dload method
Click to expand...
Click to collapse
In that case you could always send an email to DC to see if they are working to update it to work for 8.0. They seem pretty helpful and responsive from when I've contacted them before so I'm sure they might be able to offer some information.
Jyndon said:
In that case you could always send an email to DC to see if they are working to update it to work for 8.0. They seem pretty helpful and responsive from when I've contacted them before so I'm sure they might be able to offer some information.
Click to expand...
Click to collapse
Yes, I did it, but cusromers sevice told to me that they have no plan about supporting new security patch
velvel said:
I think we are out of luck I was just asked for 30 euros to get the bootloader unlocked as I am also on 8.0
On DC-Unlocker page it says:
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Not sure if downgrading and then unlocking would make sense...
Click to expand...
Click to collapse
hi,
I tought so but I did downgrading with HiSuite and then locked all requirements for DC Unlocker and I've got my bootloader unlock code now to do anything !!!!
It took a while and lot of nerves but at the end you should do step by step all points which was mentioned in the begining of this thread.
in case of dc-unlocker problems try to use other usb port (other than usually you use for connecting the phone to computer)
rymcio80 said:
hi,
I tought so but I did downgrading with HiSuite and then locked all requirements for DC Unlocker and I've got my bootloader unlock code now to do anything !!!!
It took a while and lot of nerves but at the end you should do step by step all points which was mentioned in the begining of this thread.
in case of dc-unlocker problems try to use other usb port (other than usually you use for connecting the phone to computer)
Click to expand...
Click to collapse
Hello,
Hisuite method does not work with latest firmware/security patch. Tried many times, but no option to downgrade appears. It looks like Huawei would prevents to let us downgrade as they stated.
[email protected] said:
Hello,
Hisuite method does not work with latest firmware/security patch. Tried many times, but no option to downgrade appears. It looks like Huawei would prevents to let us downgrade as they stated.
Click to expand...
Click to collapse
yes unfortunatelly you are right , i checked and there is no option any more for downgrading to Nougat from B365 in my case.
Hey i bought 4 credits and when i try to read bootloader code i get "unknown error (375)". Maybe you know why?
justinas2003 said:
Hey i bought 4 credits and when i try to read bootloader code i get "unknown error (375)". Maybe you know why?
Click to expand...
Click to collapse
What? Where? If you mean DC unlocker tool maybe your device isn't supported, but you should ask them not here.
@justinas2003 which software version and security patch you got? Here some additional info:
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/172205-unknown-error-375
lukastob said:
@justinas2003 which software version and security patch you got? Here some additional info:
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/172205-unknown-error-375
Click to expand...
Click to collapse
So I should downgrade through HiSuite?
I have ALP-L29 (c185) Running emui 9.1.0.32 and unlocked bootloder. Is there any way to relock bootloader. I have tried DC unlocker (says chipset is not competible), Multi-tool, and fastboot command but none of them worked. Also tried to restore an factory reset with Erecovery but still unlocked. I am planning to sell my phone but probably buyer won't want root or unlocked bootloder
draqkin said:
I have ALP-L29 (c185) Running emui 9.1.0.32 and unlocked bootloder. Is there any way to relock bootloader. I have tried DC unlocker (says chipset is not competible), Multi-tool, and fastboot command but none of them worked. Also tried to restore an factory reset with Erecovery but still unlocked. I am planning to sell my phone but probably buyer won't want root or unlocked bootloder
Click to expand...
Click to collapse
Update using a dload firmware. It will lock it.
However, there seem to be no free one for ALP C185 9.1 :/
ante0 said:
Update using a dload firmware. It will lock it.
However, there seem to be no free one for ALP C185 9.1 :/
Click to expand...
Click to collapse
Sorry but what is "a dload firmware"?? I am familiar with dload folder methode ( force Update) but is there a special kind of firmware for this methode?
draqkin said:
Sorry but what is "a dload firmware"?? I am familiar with dload folder methode ( force Update) but is there a special kind of firmware for this methode?
Click to expand...
Click to collapse
Service firmware. And yes, it's special. Firmware from Huaweis own server (hicloud) is Online only, and can't be used to lock bl.
Service firmware is Offline, so you can flash it using an OTG cable and a memory stick.
Or, since you're rooted, you can place it directly in /data/update/dload/ and skip the OTG cable part.
You'd then reboot and hold VOL UP + VOL DOWN (OTG plugged in to phone if not /data/update/dload is used) and phone will start in force update mode and start update.
ante0 said:
Service firmware. And yes, it's special. Firmware from Huaweis own server (hicloud) is Online only, and can't be used to lock bl.
Service firmware is Offline, so you can flash it using an OTG cable and a memory stick.
Or, since you're rooted, you can place it directly in /data/update/dload/ and skip the OTG cable part.
You'd then reboot and hold VOL UP + VOL DOWN (OTG plugged in to phone if not /data/update/dload is used) and phone will start in force update mode and start update.
Click to expand...
Click to collapse
Hmm then i assume Team MT firmwares are not dload firmwares. So is there any way to get this special firmwares for my phone?
draqkin said:
Hmm then i assume Team MT firmwares are not dload firmwares. So is there any way to get this special firmwares for my phone?
Click to expand...
Click to collapse
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
ante0 said:
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
Click to expand...
Click to collapse
Thanks much ? i will give it a try. One last question if i restore and relock bootloader with this firmware, can i unlock bootloder again with my old unlock code? ( in case i need to root again) ?
draqkin said:
Thanks much ? i will give it a try. One last question if i restore and relock bootloader with this firmware, can i unlock bootloder again with my old unlock code? ( in case i need to root again) ?
Click to expand...
Click to collapse
Yes, as long as you don't modify oeminfo too much. But update will not change unlock code.
Oh yeah, I noticed the dload came without instructions. If you use otg and memory card you just copy the 'dload' folder (after extracting from zip) and paste on a memory stick. Then plug in otg cable in phone and reboot while holding vol up + down. If you use /data/update/ you'd have to transfer files using adb push to /sdcard/ and from a command prompt:
adb push update_sd.zip /sdcard/
adb push update_sd_ALP-L29_hw_meafnaf.zip /sdcard/
adb shell
su
mkdir -p /data/update/dload/ALP-L29_hw_meafnaf/
mv /sdcard/update_sd.zip /data/update/dload/
mv /sdcard/update_sd_ALP-L29_hw_meafnaf.zip /data/update/dload/ALP-L29_hw_meafnaf/
meafnaf zip might be named differently, I turned off computer so can't check.
After this, still in adb shell:
echo --factory_sd_update > /cache/recovery/command
reboot
Phone will reboot to update mode and flash firmware.
After this you should be locked
Thanks again
ante0 said:
Found one on AH.ru that should work: https://androidhost.ru/1MH5
I downloaded and confirmed it's a service firmware anyway
Click to expand...
Click to collapse
Look like zip file has a password. Do you have it by any chance?
draqkin said:
Look like zip file has a password. Do you have it by any chance?
Click to expand...
Click to collapse
It's 'ministryofsolutions.com'
Try disabling find my device
I've had this problem before as well with adb, first set the phone up and disable find my device, then try to relock the bootloader again with adb.
Hi
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13)
I unlocked my bootloader long time ago with the code from huawei.
Now i would like to relock it using dload format method.
Where do i download the fw to perfrom this method? and what version should i download?
carnby24 said:
Hi
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13)
I unlocked my bootloader long time ago with the code from huawei.
Now i would like to relock it using dload format method.
Where do i download the fw to perfrom this method? and what version should i download?
Click to expand...
Click to collapse
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
If it contains a dload folder it should work.
So if im having the current fw 9.1.0.321(C636E5R1P13), what should the service firmware be?
---------- Post added at 01:36 PM ---------- Previous post was at 01:32 PM ----------
ante0 said:
If it contains a dload folder it should work.
Click to expand...
Click to collapse
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
Are you sure Erecovery will lock back my bootloader?
carnby24 said:
So if im having the current fw 9.1.0.321(C636E5R1P13), what should the service firmware be?
---------- Post added at 01:36 PM ---------- Previous post was at 01:32 PM ----------
Are you sure Erecovery will lock back my bootloader?
Click to expand...
Click to collapse
Erecovery will not lock bootloader.
Generally you'd want a service firmware for the current build you're on, but that's now always possible. Any 9.1 C636 should work though.
hamadazh said:
Try restore it from eRecovery ,, or there's rom in androidhost site but you need @ante0 for confirming if this service firmware or not you can download it then extract it and see if there's dload service or not .
https://androidhost.ru/1MoI
Click to expand...
Click to collapse
Its asking for a password when i unzip it? Anyone know what is the password?
Oh okay Never mind, found out the password of some googling.
ministryofsolutions.com