Related
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to provide full Treble-compatible hardware support, and nothing else.
This means that hardware which DON'T have Treble API won't be supported, like Essential's external camera.
No feature will be added. This will ease forward porting to new Android versions, which is the very goal of Project Treble
My hope is that other ROM developers will use this ROM as a basis to construct more advanced ROM.
For a list of supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
Follow instructions available at https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Changelog
v29 (2019-03-06):
- March security patch
- Fix MT6739 incoming SMS and mobile data
v27 (2019-01-08):
- January security patch
- arm32_binder64 variant
- Minor stuff
v25 (2018-09-07)
- September security patch
- [Mi 6X/Mi Pad 4] Fix backlight
- [Mi Mix 2S] Disable fingerprint button behaviour
- [Galaxy S9/Note 9]
- Fix (some) MTK incoming call
- Fix a2dp on some devices
- Fix boot on some devices
v23 (2018-08-07):
- August security patch
- Fixes tethering on some Qualcomm devices (Thanks @notsyncing)
- Enable Ambient Display for everyone
- Add an off-computer flasher (first step towards OTA)
- Fixes MTP
- Fixes fingerprint on Moto devices
- Change Huawei quick charge based on device (Thanks @Dil3mm4 )
- Fixes camera on Moto devices
- Fix notches height for some devices (Thanks @tadiT7)
v22 (2018-07-03):
- July security patches
- Fixes Samsung Galaxy S9 fingerprint enrollment
- Fix in-call audio for Pixel 2
- Disable night mode on some MTK for which it is very slow
- Fix wifi tethering on some configurations
v21 (2018-06-27):
- [OnePlus 6] Fix booting on A slot
- [OnePlus 6] Fix userdata filesystem size
- [OnePlus 6] Include a framework-res overlay (fixes auto backlight, improve battery-life, ...)
- Fix status bar height for notches on various devices (Thanks @tadiT7)
- [Samsung Galaxy S9 Qualcomm] Fix backlight
- Fix webview in Android Go variant
- Fix audio jack for some devices
- Fix H264 encoding on Huawei (Thanks @OldDroid)
- Fix backlight on some SDM845 devices (Xiaomi Mi Mix 2S, Xiaomi Mi8)
v20 (2018-06-07):
- June Android security patch level
- New experimental FLOSS variant (check sources for list of apps)
- [OnePlus6] Fixes backlight
- [OnePlus6] Partial support for DnD slider
- Fixes bug on some A/B devices where device would stop booting after several success
v19 (2018-06-03):
- Huawei fast charge (Thanks @flex1911 and @OldDroid)
- Fix MTK TrustKernel TEE (those devices will need to factory reset!)
- Support 32bits Android 8.0 devices
- Rewrite Security Patch Level for Android 8.1 devices, and A/B devices as well. Should fix boot for some devices.
- Enable GPU profiling on Huawei devices to fix UI glitches
- Fixed Modded Google Camera installation
- Use round icons
- Enable doze
- New Android Go variant
- On Huawei devices add "Swipe fingerprint for notifications" option
- Releases are now compressed with xz. Uncompress before flashing.
v18 (2018-05-14):
- Update to Android Security Patch level 2018-05-01
- Disable HW keystore on mediatek devices using trustedkernel, until it is fixed
- Re-enable Huawei navigation keys (Thanks @LuK1337 and OpenKirin team)
- Fixes android build version/security patch level (might lead to stuck on bootanimation some devices)
- Enable NightMode for everyone
- Enable automatic backlight with Huawei Mate 9 settings on Huawei devices
- Remove unnecessary warning on boot (if you still get it, it means it is useful, to tell me!)
- Include android.system.net.netd, fixes data connection for several Qualcomm devices
v17: (2018-04-24)
- Fixes multimedia from SDCard
- Fixes in-call audio for Qualcomm devices
- Fixes in-call earpiece/speaker for Foxconn/Qualcomm devices (Razer Phone, Sharp Aquos S2, ...)
- Fixes signal level for Huawei devices (Thanks to OpenKirin team)
- Fixes boot on some A-only devices (HTC U11+, Xperia XZ1 at least)
- Report vendor's security patch level instead of framework security patch level
- Fix fsck for f2fs (Thanks @flex1911 and @LuK1337)
v16: (2018-04-05)
- Fixes MTP access to sdcard
- v15 was missing graphical glitches fix. Applied it again.
- Resize /system to maximum size on first boot
v15: (2018-04-03)
- Update to 2018-04-01 security patches
- Fixes FAT sdcards
- Fixes some USB-C headphones on some devices
- Fix Essential PH-1 boot
v14: (2018-03-26)
- Fixes Galaxy S9(+) backlight control
v13: (2018-03-23)
- Disable Android's fake touches, which made unlocking hard
- Fixes Galaxy S9 boot and WiFi
- Make system.img back to 1.5GB
- Disable again adb auth, to help debugging
v12: (2018-03-05)
- Updated to security patch 2018-03-01
- Various stability, behind-the scene, changes
- Fixes camera on MTK devices
- Support ARM32 devices
- Supports HW button backlight
v11: (2018-02-20):
- Fixes bluetooth on Kirin 970 devices (Thanks @LuK1337)
- Fixes sdcard on Huawei devices
- Includes nfc-nci.conf, should fix NFC on some devices
- Show real Android version (Thanks @LuK1337)
- Enable ADB authentification
v10: (2018-02-18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work
v9: (2018/01/15)
- Include the compositing fixes for Kirin 970
- Crude support for Huawei fingerprint gestures (click = home, left = back, right = voice assistant, up = quick settings, down = notifications, long press = recent apps)
v8: (2018/01/14)
- Huawei compositing fixes (fixes various graphical glitches)
- Various su SELinux fixes
v7: (2017/12/30)
- Fixes various regressions (APNs, A/B, vanilla, fingerprint ...)
- Fixes dev/input requirement (not useful to any real-life product yet, afaik)
- Fixes some not-installable applications from Play Store
- Fixed substratum in phh's superuser
v6: (2017/12/19)
- Major code clean-up. Please report regressions
- Fixes random reboot on Huawei devices
- Optionally includes SU (you need to install phh's SuperUser from F-Droid/Play Store)
v5: (2017/12/14)
- Fixes FDE decryption (SystemUI was crashing in loop)
- Use a real list of APNs
- Include Chrome and Gboard (fixes IME crash when trying to input a symbol)
- Fixes SEPolicy for Hardware Overlay Picker (should fix crash of Hardware Overlay Picker on startup)
v4: (2017/12/10)
- Fixes sdcard in MTP
- Fixes Dual-SIM
- Includes hardware-specific overlays:
- Enable 4G selection in networks
- Bigger status bar on Essential PH-1
- Enable navigation bar on HTC U11+
v3: (2017/12/04)
- Fixes sdcard in MTP build fail, so will be fixed in next release
- New variant including gapps
v2: (2017/11/26)
- Fix wifi tethering
- Fix F2FS userdata
- Fix sdcard
- Fix fingerprint (Huawei)
Download:
https://github.com/phhusson/treble_experimentations/releases/download/v29
Want to chat about this project? Go to Freenode IRC, #phh-treble.
IRC: irc://irc.freenode.net/#phh-treble
WebIRC: http://webchat.freenode.net/?channels=#phh-treble&uio=d4
Matrix: #freenode_#phh-treble:matrix.org
Other chatrooms:
Telegram https://t.me/phhtreble
Thanks @MishaalRahman and @Exelios for the huge kickstart help
Thanks to all my donators:
- @Exelios
- @fargonaz
- @VictorM86
- @howdid
- @heatfire
- @ohwarumbloss
- @RexGoogolplex
- @abhas.abhia
- @Emoclaw
- @Sebianoti
- @DocRambone
- @egandt
- @Blackbird1997
- @Burakki
- @josdehaes
- @TheUndertaker21
Thanks to the following companies:
- Huawei, for a Huawei View 10
- Blackview, for a Blackview A20
PS: Yes the name sucks, but I'm clueless about a name
How to know if your phone is supported:
- Does your OEM provides a stock Oreo ROM?
No ===> Your phone is not supported
- Run Treble Check on stock Oreo ROM. Does it say Treble is supported?
No ===> Your phone is not supported
If all answers are yes, then your phone MIGHT be supported.
Test it, and report the result!
Build script available at https://github.com/phhusson/treble_experimentations/blob/master/build.sh
Current status:
Over-all:
Xperia XZ1:
- Broken camera (because of Sony's DRM)
Huawei Mate 9 Pro and Honor 9:
- Fingerprint sensor should have "home" behaviour
- software keys should be disabled
Known end-user problems (WON'T BE FIXED in this ROM):
- No exfat
Known mess:
- A-only should use https://android-review.googlesource.com/q/hashtag:"non-ab-boot-gsi"+(status:open OR status:merged) instead of dm-verity hacks
- the dm-verity work-around is also needed on A/B, so other patches are missing, for some other reason
- On A/B devices, this system.img effectively transforms the device into a userdebug build. This means adb root works!
adb root should work on A-only later too, though it requires that the OEM includes https://android-review.googlesource.com/q/topic:move-adbd-to-system+(status:open+OR+status:merged)
This can probably be worked-around by moving adbd inside a /system/etc/init/xxx.rc
- ADB auth is totally disabled at the moment on A/B, this is bad, but useful for debugging.
- Huawei (for instance Mate 9) doesn't declare android.hardware.fingerprint. This ROM does it for them, but this need to be better implemented
- SuperSU and Magisk screws with SELinux policy. DO NOT USE SuperSU OR Magisk WITH THIS ROM
Great work guys, indeed revolutionary work, Congrats
Can there be support for the LG optimous g pro
Leone/kyleproxx said:
Can there be support for the LG optimous g pro
Click to expand...
Click to collapse
That phone was released in 2013, so it's unlikely.
Support for Xiaomi Redmi Note 4 (mido), is it possible?
Following the project.
weldone @phhusson.
will this rom support oneplus5 later on?
jef_00 said:
will this rom support oneplus5 later on?
Click to expand...
Click to collapse
OnePlus said they won't support Treble, so no.
You can try to complain to them, since all they do is because for good PR.
phhusson said:
OnePlus said they won't support Treble, so no.
You can try to complain to them, since all they do is because for good PR.
Click to expand...
Click to collapse
thanks for you answer mate
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Swan Princess said:
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Click to expand...
Click to collapse
A/B refers to the new partitioning system on the Pixel and Essential devices. It has one active slot and a backup slot for all parts of the system, so you'll have a boot_a and boot_b, system_a and system_b, and so on. Most devices still use a singular slot system, so unless you have a pixel or essential phone, you would flash the normal O build. Also, the steps on how to flashing back to stock are usually device specific, but you should be able to restore your stock O build by just reflashing the stock system.IMG from your device and wiping in fastboot.
IH8TouchWiz said:
A/B refers to the new partitioning system on the Pixel and Essential devices. It has one active slot and a backup slot for all parts of the system, so you'll have a boot_a and boot_b, system_a and system_b, and so on. Most devices still use a singular slot system, so unless you have a pixel or essential phone, you would flash the normal O build. Also, the steps on how to flashing back to stock are usually device specific, but you should be able to restore your stock O build by just reflashing the stock system.IMG from your device and wiping in fastboot.
Click to expand...
Click to collapse
Oh, thank you for explaining that to me! I have a Mate 9 and I seem to enjoy living on the bleeding edge, at the same time I'm dependent on WiFi tethering for my net. So may try it and see how it works at least. Would love to see if we get any opportunities to fiddle with the camera processing and GPS subsystems, as those are my hobbies.
Swan Princess said:
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Click to expand...
Click to collapse
Well A/B is the new partitioning scheme where all firmware partition exist twice, and the bootloader switches from one to the other when updating. This is also called seamless updates.
To revert back to stock... Well flash stock?
interesting project, I've a question..are there any chance to run this project on device like P8 Lite 2015 (Kirin620) and P8 Lite 2017 (kirin655) since both are arm64? and also System A/B must be enabled on that device? thanks in advance
haky 86 said:
interesting project, I've a question..are there any chance to run this project on device like P8 Lite 2015 (Kirin620) and P8 Lite 2017 (kirin655) since both are arm64? and also System A/B must be enabled on that device? thanks in advance
Click to expand...
Click to collapse
Unless they are officially updated to Oreo and supports Treble (very unlikely), then no.
PresidentMcCain said:
Unless they are officially updated to Oreo and supports Treble (very unlikely), then no.
Click to expand...
Click to collapse
Only P8 Lite 2017 will get Android Oreo soon reported by many websites, but not sure if can handle Treble project.
I can try Port for Mido (Redmi Note 4/X)?
Xiaomi Mi 9
[Cepheus]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
I. Official Firmwares
II. EU and China Firmwares
III. Guide for Bootloader Status, Drivers, and Rooting
IV. Removing Bloatwares in Locked Bootloader
Stable Firmware
GLOBAL
10.2.9.0 PFAMIXM
10.2.6.0 PFAMIXM
10.2.3.0 PFAMIXM
EU (EEA)
10.2.22.0 PFAEUXM
10.2.17.0 PFAEUXM
10.2.15.0 PFAEUXM
10.2.12.0 PFAEUXM
10.2.24.0 PFAEUXM
10.2.26.0
11.0.6.0
CHINA
10.2.16.0 PFACNXM
10.2.15.0 PFACNXM
10.2.11.0 PFACNXM
10.2.5.0. PFACNXM
10.2.25.0.PFACNXM
MIUI 11 11.0.20
MIUI 11 11.0.3.0
11.0.2.0 OTA 11.0.3.0
Global Beta Firmware
9.4.2 Recovery
9.3.22 Recovery
9.3.7 Recovery
9.3.1 Recovery
9.5.9 Recovery
9.5.16
9.5.23
China Beta Firmware
9.4.1 Recovery
9.3.22 Recovery
9.3.14 Recovery
9.5.1
9.4.18
9.9.3
MIUI 11 9.9.24
MIUI 11 9.9.25
MIUI 11 9.9.26
MIUI 11 9.10.9
MIUI 11 9.10.16
MIUI 11 9.10.17
MIUI 11 9.12.27
EU Firmware
Stable Firmware
10.2.16.0
Beta Firmware
9.4.18
9.4.11
9.4.1
9.3.28
9.3.21
9.3.1
9.4.25
9.4.26
9.5.1
9.5.9
9.5.16
9.5.23
9.5.30
9.6.5
9.6.20
9.6.27
9.7.4
9.7.11
9.7.19
9.17.22
9.8.1
9.8.8
9.8.9
9.8.22
9.8.29
9.9.3
9.9.6
MIUI 11 EU
9.9.26
9.10.10
9.11.7
9.11.22
9.11.28
9.11.5
9.12.12
Mi-Room
9.4.11
9.4.18
9.4.25
9.5.9
9.5.16
9.6.20
9.6.27
9.7.4
9.8.1
Revolution OS
9.5.1
9.5.29
9.6.23
9.9.7
9.9.21
9.11.21
malchik-solnce
9.4.18
9.4.30 - NEW
Disable File Encryption
DFE
Drivers
Minimal ADB and Fastboot
ADB/Fastboot tools - Recommended
USB Drivers
Bootloader Status
Type the commands using ADB
fastboot devices
fastboot oem device-info
If fastboot issues Device unlocked: true - the bootloader is unlocked
If fastboot issues Device unlocked: false - the bootloader is locked
TWRP Recovery
TWRP 3.2.3-10
TWRP 3.2.3-6 test
Twrp 3.2.3 by mauronofrio
Root
Magisk
Google Pay Fix
Install PrebuiltGmsCore and flash Google pay Patchfix (Android 9 only)
Stock Kernel
Stock Kernel img
Switch between Global Stable (MI, EEA / EU, RU)
-Locked or Unlocked Bootloader try this XiaoMiTool V2 Project
Removing Bloatwares in Locked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
Donation for a coffee
Donation for a coffee
Donation for a coffee
Android Q 9.8.8 [Cepheus]
Android Q 9.8.8
Changelog
Download
Android Q Beta 3
Downloads:
Xiaomi Mi 9 Android Q firmware
MIUI ROM Flashing Tool
Mi PC suite
Installation
Option 1
1.Download Mi PC Suite and open
2.Put Mi 9 in Fastboot mode connect the phone to your PC, and select the firmware.
Option 2
1.Turn off your Mi 9.
2.Press and hold the Volume Down and Power buttons to enter Fastboot mode.
3.Connect the Mi 9 to your PC.
4.Double-click the downloaded firmware to decompress it.
5.Open the file folder for the decompressed firmware and copy its path on the PC.
6.Once the MIUI ROM Flashing Tool is installed, open MiFlash.exe and paste it into the address bar the firmware file folder path copied in the previous step.
7.Click the first button (circled out in yellow) to refresh.
8.Click the second button (circled out in red) to flash the firmware to your Mi 9.
Bugs:
Alarm does not ring when the device is switched off.
Device restarts after user selects wireless projection device in the Wireless display.
Settings app stops running after user deactivates shortcut to mute device.
Settings app stops running when Gesture is selected in Settings.
File app stops running after refresh.
Unable to switch screen color in Settings.
Unable to add a fingerprint
Viper4Android + DDPlus
Viper4android + DDPlus =
*Extreme Caution
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk Repo (install as system app) and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
DDPlus
Profiles 1
Profiles 2
*Put profiles in Viper4Android folder
*after choosing profile close and open Viper4android turn on turn off the master power and close viper4android (check if Driver Status (Enabled: YES)
Another one
great efforts ? much love
Rooting Xiaomi devices doesn't void their warranty, just to let you know.
Hello,
you propose a version 3.2.3-10 of TWRP.
I had not seen it in any of mi9's root posts. It is suitable for this smartphone?
Flash latest Magisk and You have rooted Mi9.
Wysłane z mojego MI 9 przy użyciu Tapatalka
MIUI 10 10.2.9.0 Android Pie 9.0 is up!
Changelog
Camera
New: Introducing Macro mode
Optimization: Ultra wide angle mode changed to 0.6X Ultra wide angle zoom
Optimization: Brightness adjustments for human faces in third party apps
Optimization: Image quality for photos and videos
Fix: Photo previews for individual shots weren't displayed in some cases
Settings
Fix: Screen brightness was lowered in the Dark mode whenever audio volume was adjusted
Fix: Fingerprint scanner couldn't be used when TalkBack was on.
Malchik-Solnce ROM
MIUI 10 9.4.18 Android Pie 9.0
Changelog
New
- screen time
- wallpaper slideshow
- AI 3.0 in camera (Mi8, test)
- icons of unimportant notifications
- new font size settings
- dynamic photo mode (Mi8, Mi9)
- a full-fledged GameTurbo mode
- settings for color names in the call log
- custom camera watermark (Mi8)
- new charging animation on the lock screen
- choosing the background color in hours (auto, light or dark)
- disabling search by gesture up (desktop settings)
Optimization
- updated Magisk 19. 0
- translations updated to 9.4.18
- updated music app
- select region in settings (Note 5, Mi9)
Corrections
- fixes known bugs
- fixed Wi-Fi status check bug
- fixed crash when editing photos (portrait effects)
- fixed Turbo Game mode (clear plug-in data security)
Bugs
- error 7 (clean the cust (root / cust) folder before flashing)
- cannot wind the system (mount it before the firmware with your hands)
- Google Pay does not work but we have work around fix..
Important Information
The list of changes may vary depending
on the version of Androi d, device or interface language.
Install firmware only through TWRP.
Remove Magisk: META-INF \ com \ miui \ magisk.
Revolution OS 9.5.1 Android Pie 9.0 is up!
Changelog
The System
the New - Base updated to 9.4.11
the New - Added of low brightness By DC attenuation function (MI9)
the Optimize - Updated the the Google security patch (2019 # 3) to Improve system security
the Optimize - Optimization of the speaker's stereo effects
the New - the New not boot animation for the the MIX range (the word the MIX Comes out under Revolution OS)
the Optimize - Updated Youtube vanced, microg, the Google Keyboard and the WebView the Google
Desk is
Fix - Optimized the experience of setting a password the when using the a transparent a wallpaper
the Settings
the Optimize - Optimized display of the accessibility display list (MiMIX2S)
Optimize - Viewing the grouping of the homepage optimized
Optimize - Optimize the display of the list display accessibility
Optimize the screening of the
screen.
Click here to view the
security page
.
The Optimize - the optimize the style of the red • envelope wizard request window the below the horizontal screen
Fix - repairing the risk copy-DURING the virus scan process will of the restart the scan
Camera
the New - the Activated 18: 6 (full screen in the camera
Lock screen
the New - Charge screen for all devices
Fix - Problems that a double bar was generated when no notifications
Fix it is a fissure
fix it
? , the charging ball does not Disappear
Fix - Fix the problem That the notification bar of the lock screen is abnormal the when unlocking in the the status of the screen
the Optimize - the Optimize the the GPS the status bar display icon
the Optimize - the optimize the user interface and the experience of changing the name of fingerprints.
Optimize - optimize the quick copy of the "require password once every 72 hours" function
Fix it
after you use your fingerprint.
Fix it for a moment.
There is no problem for you to fix the cable
.
It is not necessary to
update the problem.
Fix - fixes the drop-down notification bar of the lock screen, charging the ball does not Disappear
Fix - minor notifications are not solved, But IT Shows a problem with the entry "Not by important notifications"
Fix - the fix the problem That the 24- hour dynamic video display style does not show the background image
Fix - correct the bottom of the lock screen when applying a third-party theme shows a messy problem
Landscape Mode
Fix - Blinks when the screen is turned (Mi 9, Mi 8 Pro).
Fullscreen
the New - fullscreen mode Improvements on devices with as with the Water Water Drop of Notch (Mi 9, redmi Note7)
Clock
the New - added the Possibility freely to the select Communities white or a black background Used in the clock configuration
The Optimize - the background Used color of the watch the after the this the update is Communities white
the Network Assistant
Fix - the fix the problem That the operation saves as with the invalid the after setting the OF THE SAME quota in the package
Album
the Optimize - the Optimize the Removal of the SLOW album
the Optimize - the Optimize SLOW loading of album Pages
Optimize - Optimize the album thumbnail by loading a slow problem
FaceID
Fix - In some cases, the message Didn't disappear.
Blocking the Application
Fix - Fix some error of models The visualization of the input the box of the application password blocking
the Game tools
the Optimize - Fully updated, support to block blocking device, the SIM cards, the apps, for Among: others.
Optimize - Added desktop shortcut function for game acceleration.
Optimize - optimizes how to activate the game's acceleration mode.
Fix - the fix the game to? Answer the speaker, the duration of the call Shows the wrong question
Fix - the correction of the fast travel network A to Accelerate the incoming directory the click is not sensitive
the Optimize - the new version of the game accelerates the home page and the The style of the interface is completely new.
The Optimize - the game's toolkit The is fully up closeup to date, Supports information screen lock, network A card with one's-the click switch statement and OTHER functions The
Other optimizations and adjustments
Fix - the problem of the user interface of the height of the button AT the bottom of the interface guide is not uniform.
MIUI 10 EU 9.4.25 Android Pie 9.0 is up!
CHANGELOG 9.4.25
System
Optimize - Update Android security patches for some devices
Lock screen, status bar, notification bar
Optimize - Add lock screen resident notification in the do not disturb state
Fix - Fixed an issue where Talkback mode was not charging but prompted "fast charging"
Fix - Fix the problem that still occurs in special cases after the screen is closed.
Camera
Fix - Fix the filter's occasional darkening problem
Fix - Fix filter occasional mosaic problem
Fix - Fix the pre-shooting mirror watermark flattening problem
Fix - Fix the switch mode when fixing the front photo square, return to the problem that the photo does not remember the square
Network assistant
Fix - Fix the problem that the traffic ranking is stopped and stops running.
Hi, can I use the xiaomi adb tool to unlock bootloader?
madsponge26 said:
MIUI 10 10.2.9.0 Android Pie 9.0 is up!
Click to expand...
Click to collapse
Should this be flashed from TWRP or from fastboot using MiFlash?
Thank you!
MIUI EU 9.4.26 Android Pie 9.0 is up!
Changelog
Optimized System Performance
Improve System and Security Stability
Mi - Room 9.4.25 is up!
Official changes:
Security patch update for some devices.
Updated low battery warning.
Added notification on the lock screen about the active Do Not Disturb mode.
Bug fixes, system optimization.
Changes from the MiRum team:
Added support for the Xiaomi Mi6 device based on Android 9.
Added separate volume for calls and notifications (thanks to MiuiPro).
Dialer style selection returned (Phone> Menu> Advanced> Dialer View).
Fixed dialer in dark mode.
Fixed the background of the input field in the notification panel in dark mode.
Completion and improvement of existing patches and translation.
Fixed the “Voice Match” function for Mi8.
Added 10.2.24.0 EEA..
Added MIUI 10 EU 9.5.1 Android Pie 9.0 is up!
Changelog
Hi, i'm on MIUI 10.2.24.0 STABLE (GLOBAL)
What twrp should i use, atm. there are 3 different versions available.
I want to use TWRP for nandroid backup (not working yet) and flash Magisk and maybe later other CAF or GSI roms.
9.4.30 malchik-solnce
Changelog
List of changes
New:
- screen time
- wallpaper slideshow
- dynamic photo mode (Mi8, Mi9)
- custom camera watermark (Mi8)
- select the background color in hours (auto, light or dark)
- some new features in the camera for Mi8 (frontal flash of the screen backlight, makeup, correction, etc.)
Optimization:
- updated translations to 9.4.30
- updated music application (data-app)
Corrections:
- corrections of known errors
- fixed clipping of a custom watermark ( Mi8)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Floyd Port For the Exynos7420 Series
Some information you should know..
This is a full Note8 port with android version 9.0 based on HadesRomV12.0 By @corsicanu
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
V5.1 Notes
This is a minor update to resolve a bunch of reported errors and ones that were discovered after the release, they only addresses the bugs / changes in the changelog, this does not touch camera or anything else. this is mostly to fix networking and kernel issues reported in V5. also some minor improvements. as mentioned before, this remains an EOL version. i dont plan on rebasing to the March update, by the time im done with it and with testing, April will be out
V5.0 Notes
Here we are again, with another major release, what initially started as couple bug fixes ended up being its own fully fledged ROM. with tons of fixes and improvements to make this the ultimate Pie update for this device. and perhaps the Last. i can see no way at the moment of improving upon this release, which means my efforts hopefully will be focused towards Q if it ends up being viable and i find motivation to do so. id like to give a big shoutout to @corsicanu for his awesome V12 Base, that by itself includes a ton of improvements and id like to thank the testers for working with me on this one, its a massive ROM to say the least.
Hope you like it, and as always please read the notes and F.A.Q to understand how to use this ROM so you dont fall in issues. if you appreciate what i do here, consider donating @ Paypal
V4 Notes
Hey everyone, Finally after a long time V4 is here. ive put 10 times more effort into this compared to the previous releases. Tons were changed and the entire ROM was built up from scratch. everything rom the rom to the kernel was fully remade and improved. 30K Downloads later on V3.
Today happens to be my 22nd Birthday, and i would like to give you all a gift instead.
This Version is without a doubt the biggest ROM ive worked on to date, through development challenges, special device issues , ROM Size and tons more, it was exhausting. however
the end result makes it all worth it. testers on multiple variants / devices / configs came back positive.
While the buglist still leaves some to be desired i think this is as good as i can make it for now. maybe in the future if there was a V5 we will see it reduced.
The changelog is massive, and to summarize it, many annoying things in V2/V3 were finally resolved including the most important thing which is CALLING. US variants are finally properly supported. except the ones that use QMUX modems. maybe that will be for another day
As always, THANK YOU for being dedicated to this project. and special thanks to @DR_Amoxicillin @corsicanu @TheOGLunarixus and my testers for helping both directly and indirectly
I hope you Enjoy the ROM. if you appreciate this project consider donating @ Paypal
V3 Notes
Hey everyone, Somehow we are still standing with this project, it is as horrible as it seems, yet fun. I started this project 8 months ago to "flex" only, turns out people enjoy it including myself, Through Oreo and Pie this project has been hell to make yet i think we are at a state were we can drop the ALPHA and BETA labels of!, V3 was in active development for over 2 months (Unlike V2 where i started a month before release) This one was carefully built, and entirely from scratch (For the third time). However i understand, you guys are tired of Note7FE. and want something different, Thanks to my partner @corsicanu that is possible. He crafted one of the best feature-full roms on xda. HadesRom and with that as a base for our project, This device became something else, something amazing. and honestly better than any rom i would have made feature wise. Thanks to him and All the flagship features such as infinity wallpapers, Some S10 Features and many others are present, the aroma is PACKED with goods. This rom is around 200/300 MB larger than the previous one (which wasn't small to begin with) however i believe it is worth it. Me and [MENTION=7098450]kill-switch[MENTION] and my testers spent alot of time perfecting it, Now we support every variant that uses Exynos7420 besides china variants, those are to come later. the US variants of the S6E+ And Note 5 are supported too. I will be making a dedicated S6 thread aswell
While i am 100% sure not all users will have the same experience, i believe the vast majority will enjoy it, As always this rom is NOT for everyone, if you want a stock camera, this aint it chief. no matter how much we want it, it is just not gonna happen any time soon if ever, thats just the nature of developing a rom that is 2 major versions beyond samsung. if you dont mind the limitations mentioned below, Enjoy it as much as possible.
And as always, if you appreciate this project and want to support us , press thanks, share your opinions and help the people in this thread who are struggling. I wont be available 24/7 to do so.
You can also help us purchase more cocaine to continue development by donating me Here or @corsicanu here or @kill-switch here or @lunarixus Here
V1/V2 Notes :
So. 5 months ago i posted this ROM. big mistake, it means i have to maintain it, which i suck at. after 2 rebases and finishing V2 twice. OneUI happened for some reason god knows why, but yeah. This ROM is BETA AF. there is alot of crap that needs to be fixed besides the general bugs we had in oreo. give or take, if you are adventurous. go ahead and flash it, if not. dont B*itch in the thread about it and flash another ROM. This ROM is NOT for average ROM users. it is for those who want to be on the bleeding edge.. it wont come out of BETA until the bug list becomes shorter. This ROM is OFFICIALLY SUPPORTED ONLY on the NOTE 5 International variants. its the one i have, the one i can test personally. it will BOOT on N5/S6/S6E And S6E+ and work well relatively speaking if you bother to read the F.A.Q. Korean and US variants are also supported for all those models via Aroma options so take care. however Note 5 US variants might not work. you can try. S6/S6E support is very BETA so use with a grain of salt, a big one. read the f.a.q for tips on how to make the experience suck less.
Eventually when you discover a new Bug that shouldn't be there, DO NOT SEND ME MATLOGS. CATLOGS or whatever. Follow the guide up there on How to properly send logs. otherwise i wont care less about your post. very simple. Remember that this port is NOT supped to be possible. we should not be running oneUI, but the stars aligned in our favor. And please there is no need to tell me to fix XYZ. if its listed in bugs or was reported. im on it.
So. TLDR; This may or may not be your daily rom, it depends on who you are. if you want oneUI, this is the price. if not, there are plenty of other ROMs based on Nougat that will work right. so use them instead and let the thread be in peace.
I sincerely hope the people who end up using this rom have fun, its a fun experience, ive been using it for the past month. and its refreshing.
Old releases (Booreo)
Hey Note 5 Community, This is my first project for this device, one of many to come. many of you might know me from my Note4 projects, i have decided to purchase the note5 in order to provide for this community quality ROMs , in hopes that maybe one day everyone here will be using an Oreo based port, instead of living on nougat that samsung left us with.
Why N7FE and not N8 S9 or any newer port ? Simply said, it is too early for me and the current state of oreo. there is some important stuff that needs ironing out before introducing more bugs. N7FE Struck a great balance between a stable port, and a feature rich one. i have also thrown in alot of additional stuff you can check below.
Support for other variants will come in the future, i choose to support this small amount due to time constraints.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
- Android 9.0
- Semi-deodexed (Apps only)
- Well debloated with Aroma options
- Zipaligned and tuned
- Optimized for battery and performance
- Full Samsung OneUI Experience
- Magisk Ready
- And all the goodies Android Pie brings
- Based on HadesROM V12
- Contains all features from Note8 minus hardware specific ones (Iris and stuff)
- All the original features are present (Wifi,Bluetooth, basic camera etc)
Floyd/Hades Port Features :-
- BluelightFilter / AlwaysOn Display
- Samsung DolbyAtmos
- Heavly optimised for N5/S6/S6E/S6E+ with their own separate configurations
- Many prop and feature tweaks and exclusive apps
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OMC setup with ALL samsung supported countries
- S10+ Livewallpapers (Aroma)
- Note8 Infinity wallpapers (Aroma)
- Full goodlock 2020pack (Aroma)
- Added exclusive samsung apps (Aroma)
- 1700+ Fonts MOD (Aroma)
- Pie Edge Panels and edgelighting+
- BixbyHome And Bixby Voice
- Recovery toggle
- Ssecure/Secure Wifi etc
- Minor system mods
- Native AppLock
- Wifi S-Secure
- Native Screen Video recorder
- Native Call recorder
- Android 10 Apps
- And pretty much everything you see in hadesRom changelog
- And many more additions from My J5 / N4 Roms and previous Floyd
CronosKernel V5.0 :-
All of the custom kernel features can be controlled using HKTweaks by @corsicanu
- Updated version in collaboration with @lunarixus
- Compiled with Linaro 7.5.0
- Optimized for battery and performance
- Tons of under the hood improvements
- AlwaysOn Display Supported
- Governors (Interextrem, smartmax, smartmax_eps, alucard, bluactive, yankactive,
bioshock, conservativeX, dancedance, darknes, hyper, intelliactive, intellimm,
lionheart, pegasus, preservative, smartass, wheatley)
- CPU / GPU Overclocking
- GPU Thermal control
- Compiler optimizations
- Many wakelocks reduced
- BoefflaWakelock Blocker
- WireGuard
- FakeKnox
- Blocked GMS Wakelocks
- Deodex Workaround
- Init.d Support
- Bootstate Green for safteynet
- Patched some props for safteynet
- MoroSound control
- Heavily optimized CPU GPU and battery
- Underclocked and undervolted CPU/GPU to conserve battery
- Heavily blocked aggressive samsung wakelocks
- Greatly improved scheduler and governor
- Aimed to retain performance at lower clock speeds
- Android 9.0 Supported
ensure you have LATEST TWRP (3.2+)
Download and copy the ROM to your device
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and if possible internal storage)
Flash the ROM.ZIP (Select only what you will use otherwise it will fail due to system size)
Setup your rom and READ the F.A.Q for more information.
After a full boot. you can flash Magisk
-Hardware composer : We do not have sources to compile oneui compatible blobs
-Camera in many 3rd party apps (Whatsapp QR , facebook messenger)
-UHQ Upscaler on T/W8 variants (SoundAlive/Dolby work however)
-N928T/W8 And G928T/W8 have audio glitches while using headphone jack
-US variants cant change call audio, refer to F.A.Q
-No support for Qcom QMUX modem variants (P and 00 Variants)
-N9208 NFC is disabled
-S6/S6E models will flicker when entering samsung gallery
Imgur Album with ALL photos : IMGR
IF you helped in this rom and i forgot you, tell me in a PM or in a reply i 100% forgot some people fam
@corsicanu For various help throughout the years and letting me use HadesRom as a base (xoxo)
@kill-switch For tremendous help on V3/V4
@Lunarixus For fixing IR Blaster and kernel help
@AbrahamGC and @kurtlestat for letting me use some of their mods from BlackDiamond Rom
@ljjehl , @SnowFuhrer and josuesim1 for keeping up with my crap while testing US variants. Thank you friend
@enesuzun2002 For general help in 7420
@lukasb06 For Making The camera shim, without it we wont have a working camera
@Noxxxious For all his amazing kernel work in 7420
@RickyBush_ For IOS Emoji
@Team Vanced For YouTube Vanced
And the rest of EliteTeam
Testers :
@khoailang2500 @CusuferR @SnowFuhrer @moonje @josuesim @Attor @qaziiabdullah @josuesim1 @Alhaitha2020
@SongJH @Thekillerbunny12341 @KeepSOBP @ljjehl @arshia_mpz @LeeXDA18 @arshiazare @Keyvintakeo @vsvarli @kinglos @rayesh5700
And few more that didn't give me their usernames
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
Floyd OneUI, ROM for the Samsung Galaxy S6
Contributors
ananjaser1211, kill-switch, corsicanu
Source Code: https://github.com/ananjaser1211/Cronos_7420
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest bootloader and modem
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V5.1
Stable Release Date: 2020-03-20
Beta Release Date: 2018-12-07
Created 2019-07-30
Last Updated 2020-03-19
Downloads and changelogs
NewsChannel : Telegram
Come hang with us on our chat : Telegram
--------------------------------------------------------------
Floyd V5.1 Based on HadesROM V12 [LATEST]
Release post : TBD
AFH : Download
MEGA : Download
GoogleDrive : Download
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.50GB
MD5 : 99020650aaafd56ee8cc721032e92c89
SHA1 : 935fdde8795af325c2d17e5b72253b918aa0a6c0
-------------------------[OLD]--------------------------------
Floyd V5.0 Based on HadesROM V12
Release post : XDA
AFH : Download
MEGA : Download
GoogleDrive : Download
P.S : if you had issues downloading from Drive, sign in and save the file to your drive
Hotfix : if you use Navbar in aroma flash the fix : Here
Updated Kernel : Here
Size : 2.55GB
MD5 : 287b5a022f486178748c8a89446c8732
SHA1 : efc907bd9a5fdea2a81f1aa21a4c141e64e7dfe1
Floyd V4.0 Based on HadesROM V11.1
Release Post :XDA
PATCH NOTES 1 : Here
PATCH NOTES 2 : Here
PATCH NOTES 3 : Here
PATCH NOTES 4 : Here
AFH : Download
Mega : Download
Google Drive : Download
P.S : if you had issues downloading from Drive, sign in and save the file to your drive
Size : 2.8GB
MD5 : 21b476f7ee4ceeca2dc36374f1196d6a
Floyd V3.0 Based on Android 9.0 Note8
Release Post : XDA
Battery and performance configs : XDA
AFH : Download
Mega : Download
Google Drive : Download (Might get limited so download fast)
Size : 2.2GB
MD5 : c40e2240f90e506e88538f04e107e174
Floyd V2.0 Based on Android 9.0 N7FE
Release Post : XDA
Important Read : XDA
S6/S6E Performance Fix : Here
Battery and performance configs : XDA
AFH : Download
Mega : Download
Google Drive : Download
Size : 2.1GB
MD5 : 4c4cb5a771811004ae7c25836f62598b
Floyd V1.0 Based on Note7FE
Initial Release - OREO
AFH : Download
Floyd v5.1 - 03.20.2020
- This release shares the same notes with V5.0
General - Changelog
Removed Samsung Q keyboard due to no one reading that it has limited languages
Added a wipe script for wiping game apks to clear broken GameBooster data
wipe apk updates for GameBooster (Disable updates in GalaxyApps required)
Revert a change in installer scripts that might cause errors
Fixed NavBar not installing
Added proper looping animation for Floyd1 anim by rayesh
Updated Floyd2 anim to a cleaner 2D one by kinglos
Fixed AOD broken analogue clock
Added Stock G928X WiFi Firmware for increased stability on S6E+
Removed left over security bins
Removed default cloudflare DNS and use google (more stable)
Made the S6 Battery options even more clear
Improved internet stability to Match V4, when data connection is lost a reboot should suffice again
Fixed Navbar installation issues, patch is no longer needed
CronosKernel V5.1 - Changelog
Removed default GPU undervolt to fix booting issues
Removed GPU Always_on Policy and let it enter offline state
Reduced frequency of random reboots to a state similar to V4
Reduced idle drain due to GPU not shutting off at all
Fixed a bug that overloaded the GPU and caused it to reboot very frequently
Slightly reduced lag compared to V5
Floyd v5.0 - 03.2020
Notes
-At all times, be sure to have atlteast 10% free internal storage otherwise random reboots may occur and loss of data
-Updating gametools (without installing navbar) will break it
-On first setup, let the phone update everything before using it
-to keep youtube vanced, untik autoupdates from platstore
-Q keyboard does not support most languages (you need to install language packs from xda)
-if your apps are not getting internet, reboot
Samsung Camera Guide
-Samsung camera only runs when auto brightness is turned off
-VideoRecording : on front/back go to ProMode > ColorTone > Tone1 > Record
--Front camera only records well at 720P
--Videos recorded will be 24~30FPS
-Selfies : Long press cam icon > select selfie
--This will switch to front camera
--To switch to main > long press icon > select auto
General - Changelog
-Rebased to N950FXXS9DTA1 HadesROM V12
-Fixed H.264/HEVC incorrect bitrate/res after snapchatfix (improves playback performance and reduces mediacrash)
-ReWork on OMX to fix a bug where playing MP4 videos causes artifacts/green objects in video
-Improved AVC encoder/decoder for smoother 4K30 And video recording
-Added hotspot/tethering fix
-Added GPSD/offline gps fix
-Removed fake signatures and mitigate snapchat banning issues
-Added 4K30FPS recording support in gcam
-Added new G920SLK Audio Fix
-Fixed samsung camera settings panel (tho not much useful anyway)
-Improvments to WiFi stability
-Reduced the Base ROM by around ~300MB
-Removed unused/unsupported APPs
-Fixed a bug where sometimes samsung video trimmer FCs
-Removed GameOptimizer/booster to fix pixelated, laggy and crashing games
-Added a new Sensors fix with improved rotation (Slightly faster in some scenario)
-Added better 7420 compatible media profiles
-Removed broken VP9 Encoder
-Added ALOT of Samsung camera fixes
-Fixed camera settings not working
-Added workarounds for Front camera to work
-Fixed Front and back camera resulotion issues (see notes)
-Fixed samsung camera video recording (see notes)
-Disabled broken camera features and some shooting modes
-Patched Camera APK to disable broken features
-Fixed broken mobiledata networks (Thanks @Kill-Switch)
-Fixed bad Mic bitrates in US models which causes distorsion in Whatsapp and others (Thanks @enesuzun2002)
-Fixed broken shutdown animation
Aroma - Changelog
-Fixed G920 INTL Kernel installation when users "skip" it
-Fixed G920SLK Kernel installation
-Added some basic
-Removed upday , Dictionary and bikemode
-Removed Q video player / editors / CallUI Pack (due to issues)
-added misc improvments to scripts
-Added option to enable Samsung covers support (S6 users with replaced USB might have black screen issues!)
-Added new HadesBoot animation
-Added 2 new Floyd bootanimations by rayesh and kinglos
-Added chrome to debloat menu (adding/removing chrome will require a clean flash to avoid FCs)
-Base rom installation (without aroma) is 2.7GB so it should work on all variants
-Updated All aroma bloat apps and include Samsung daily and other misc updates from N8 FEb
-Added Q S-PEN AirCommand (Thanks kinglos)
CronosKernel V5.0 - Changelog
-Changed to Linaro 7.5 Compiler with tons of improvments
-Noticible performance gain and overall smoother animations
-Reduced deadlock and mediacrash with the new compiler
-Optimze compiler for performance over filesize
-Reduced swap to 100 and vfscache to 50 to use more RAM for better responsivness overtime
-default block readhed to 512
-decreased time to start entering sleep
-default fs to noatime
-Removed agressive CPU DVFS
-Added back Unification support for S6/S6E F/I/T/W8/K/L/S
-Added support for single image INTL/KOR/US for all S6/S6E/N5/S6E+
-Improved unification support without breaking s6e+/n5
-Redid the 3600MAH S6 Mod to work with the new single image system
-Improved the naming scheme for 2600/3600 (stk for stock / ext for extended)
-Removed LoggingService (and clear /data/helios) to reduce space usage
-Fixed a bug that disabled MoroSound speaker gain control
-Greatly reduced wakelocks by updating the default boeffla blocker list
-Updated and reworked the power config with better tuning and greatly improved interactive performance (Thanks @Lunarixus)
-set default I/O scheduler to CFQ and improved the tunables
-Reduced Max CPU clocks to Big 1.9Ghz/ little 1.4Ghz
-Reduced MIN CPU Clocks to Big/Littie 400mHz (Without breaking bluetooth playback)
-Applied a -25mV default undervolt on the GPU
-Set the GPU Policy to "Always_on" to avoid stutters and lags due to lack of HWC
-Set the max default GPU clock to 600Mhz
-Overall retained the same performance level with significant reduction in Battery usage
-Set the kernel tick rate to 250HZ
-Fixed bunch of warnings and obsolete functions
hadesRom v12 - 03.03.2019 Changelog
Rebased to N950FXXS9DTA1 - February security patch
Updated S8/S8+ files to G95*FXXS7DTA6 - February
Fully integrated previous mods and features
Added new bootanimation
Updated Aroma installer theme
Updated GoodLock apps
Updated Samsung bloatware
Updated most of Android 10 apps
Updated Android 10 fonts and emojis
Updated hadesKernel to v1.5
FloydRom V4.0 Changelog :-
Floyd v4.0 - 01.2020
Special Notes
-Samsung camera only runs when auto brightness is turned off
-Updating gametools (without installing navbar) will break it
-On first setup, let the phone update everything before using it
-to keep youtube vanced, untik autoupdates from platstore
-Q keyboard does not support most languages (you need to install language packs from xda)
-if your apps are not getting internet, reboot
Base
-Updated base to N950FXXU7DSJ1 OCT
-Updated HW libs to N935FXXU6CSK1 NOV
-Rom rebased and redone on HadesROM V11.1 For 8895
-Fixed rotation FC in system UI
-Recovery toggle removed and integrated into a long press on restart (By corsicanu)
-Improvments to AudioFX libs to fix some audio artifacts
-Fixed bad HQM config that caused some extra heat and performance issues
-Added props to improve surfaceflinger performance
-Added other misc props to imrpove media/jpeg quality
-Removed some sview permissions that broke the ROM on some S6/S6E devices with replaced charging ports
-Updated and added more Android 10 Apps by TechDev18
-Android 10 Edge apps
-Android 10 Gallery And video player
-Android 10 SmartCapture
-Android 10 Editors (Video, trimmer etc)
-Android 10 CallUI
-Fully Odexed Framework for performance and faster boot By TechDev18
Device
-Removed GPS Hacks and improved it
-Removed old sensor hacks from oreo
-Removed WiFi Hacks and wifiloader
-Fixed a bug causing S6 to reboot on boot few times
-Fixed a bug where WiFi wouldnt start automatically
-Removed AOSP Audio hal for international S6/S6E and use the functional N935F port
-Fixed Calls in S6/S6E without relying on hacks and 6+ seconds of waiting
-Improved T/W8 Audio in calls for all variants
-Fixed a bug where 3rd party calls would be muted
-Re-organized device-specific libs and files
-Added Modded CSC/Korean CSC from Floyd V2 (selectable in aroma) With Echo fixes
-Improved Bluetooth stability while device is locked (no stuttering)
-Fixed headphone hack on N920T/W8 and G928T/W8
-Fixed delayed 6+ sec calls on N920T/W8 and G928T/W8 and G925T/W8 and G920T/W8
-In general all devices have the same call setup as stock
Hardware
-Switched some more HW libs to Exynos8890
-Updated OMX stack to N935F Pie instead of using old ones
-Switch to N935F Pie Gralloc Pie lib
-Switch to N950F widevine DRM libs
-Switch ALL hals into hwbinder mode ( Trebelized everything for the future )
-Fixed bad Power , memtrack , thermal Hals greatly improving battery and heat
-Switched to legacy camera hidl to fix tons of camera issues
-Add patched samsung camera by @Cvolton to fix rotation and media scanner issues
-Fix many camera plugin errors that broke photos
-Fixed some 3rd party camera usage (Fixing Footej, Google camera , Unixcamera etc)
-Support UHD recording in some 3rd party cameras ( UnixCamera)
-Back camera in samsung camera is now 100% reliable and wont crash in high/low light scenarios (Both auto/pro modes)
-Fixed Camera in some apps (Instagram and snapchat)
-Fixed Long coldboot time (splash image)
HadesROM
-Summary of hadesRom Changelog by @corsicanu
-(Full changelog is below)
-Rebased to N950FXXU7DSJ1 - October security patch
-Updated most samsung apps to latest versions (By 30.10.2019)
-Updated bunch of apps from S10+ Latest firmware
-Added some apps from Android 10 beta (Clock, Calendar, Keyboard, Weather, Messages, MyFiles)
-Added Android 10 fonts and emojis (Samsung and AOSP)
-Added Microsoft Link To Windows (Aroma selectable)
-Updated GoodLock apps to latest available
-Fixed the scripts wipe of Call of Duty
-Updated & patched Samsung Internet (11.0.00.55)
-Added back Android 9 apps and fonts
-Made Android 10 apps and fonts Aroma Selectable
-Added Secure Folder & Knox apps (Aroma selectable)
-Patched settings to show status Official
-Fixed Font selection in Aroma
-And tons of other misc improvments
CronosKernel V4.0
- ReDid entire kernel from scratch once more
- Removed tons of useless commits and ugly hacks
- Removed buggy upstream (until a proper upstream is done if ever)
- Tons of reworks into how noble/zero/zen are compiled to make workflow smoother
- Re-did all defconfigs N > O > P with as minmal changes as possible
- Redid AOD implementation for Zero/Noble/Zen
- Early-Mounted SYSTEM for faster booting/splash
- Boosted Crypto, block , gpu and few others performance (Compiled with Ofast)
- ReDid entire Ramdisk from scratch based on N935F one
- Removed some useless ramdisk scripts
- Added WifiLoader service to auto-enable WiFi on boot and fix Zero bootloops
- Disabled ALOT of samsung security , FIPS and Fail policies
- Removed Unification and rely on seperate kernel for zero/zerof
- Fixed high GAIN issues with morosound
- Added and improved FadeLED for noble/zero/zen
- Fixed alot of userspace errors due to kernel missing some nodes
- Added back wakelock control (Toggles, boeffla wl blocker , default wakelocks lists)
- Improvments to sched, interactive gov , usb and misc)
- Added back Dynamic Fsync and powersuspend
- Tuned inputbooster to be less agressive and more battery friendly
- Added GamePad booster frequencies
- CPU Min clocks are 400/800 To avoid Bluetooth playback stuttering and other wakeup lags
- Removed Buggy spectrum configs and replace with default Auto set configs (Non user changable)
- Revert some drivers back to Nougat (IRQ , TOUCH)
- Disabled SamsungHotPlug Fully (Improved Performance, Reduced frequency of MediaCrash by ALOT)
- Backported spinlock and Interactive speedchange from Exynos8890 (Reduced MediaCrash even more)
- Include Modified powerHAL tunables (power.rc) based on TeamNexus
- Fixes to Headphone jack on TMO variants
- Added Back GPU Control (Overclocking, Thermal etc)
- Tuned GPU freq relative to CPU freq and reduced over boosting
- Removed GPU freq connection to CPU freq ( Since we dont have HWC, this should limit GPU draw by alot)
- DT2W Implementation (Only works while AOD is on)
- Added back Battery charging control (noble/zen/zero/zerof)
- Updated Ramdisk to N935FXXU6CSK1
- Removed old ramdisk hacks, updated permissions and nodes to pie, and many misc changes
- Upstreamed CPUFREQ, FREQStats and ION Drivers to fix memory leaks and Panics
- Added S7E battery modded S6 devices support
- Tons of misc changes and improvements overall
Floyd V3.0 Changelog :-
Floyd v3.0 - 08.2019
Rom is based on HadesRom V8 by @corsicanu . go show him some love
Hotspot is fixed and working as expected
Camera is a bit more stable (tested on note 5 only)
Snapchat works without issues
UHQ Upscaler fixed
Instagram front/back camera works with the mentioned version (22.0.0.17)
Rotation bugs are less common (not eliminated fully yet)
Overall the rom is noticeably faster, stutter is less
The entire rom is now based on pure Exynos8895 base. with minimal changes done for our phones
Aroma is totally different, with more options for bloat, features and much more hades features
Rom base is optimized as much as possible for our aging device
HWC while disabled, is more robust and stable
Stutter and lags resolved in most S6 devices (possibly not all)
Kernel CPU performance is improved alot thanks to @Lunarixus
AOD crash on Note 5 and S6E+ is resolved
Media crash seems to be solved
LED Fade control is added for both the note 5 and the s6 / s6e / s6e+
some source cleanup and minimal optimizations
WifiDirect and screen mirror fixed
NFC Fixed
S6/S6E Call issues resolved
US Note 5 / S6E+ Incall audio fixed
Added an option to disable nativeblur (Thanks @Kill-Switch)
Helios Kernel V3.0
Improved performance
Removed Samsung input booster
Added CPU/DEVFREQ Booster
Disabled GPU DVFS control
N9208 NFC Specific build added
Improved SWAP
Fix AOD crash on N5/S6E+
Disable Argosd sevice due to drain
Added LED Fadecontrol for all devices
Added a service to set full res at first boot
Rewrote all spectrum profiles
Fixed Interactive governor issues
Set bioshock governor by default
GPU Policy "always_on" by default
Fixed some logging spam caused by LMK
Fixed the main cause behind many panics
Ported morosound audio
Improvements to GPU rendering
Many more performance improvements
Floyd v2.0 - 05.2019
- Updated to Samsung OneUI Running Android 9.0
- Entire rom was reworked from scratch fully based on N935F Pie
- Imported most of the aroma and features from my Prometheus Roms
- Fixed Bluetooth issues faced in V1.0
- Fixed random reboots caused by media in V1.0
- Fixed some Audio related issues
- Updated and added YUVA features
- Added custom CSC Features and prop tweaks
- Fully reworked install script for S6/S6E/S6E+/N5 Support
- Added Aroma options for Single/DualSim devices
- Added Aroma options for CSC/KoreanCSC/OMC
- Added Aroma options for International/Korean/US Audio
- Added Reboot to Recovery
- Added Missing Toggles
- Enabled Screenshot in all apps
- Disabled Signature
- Fixed Share External in Facebook
- Disabled High Brightness Warning
- Disabled High Volume Warning
- Dolby Audio effects fixed
- Added Korean CSC option
- Added US variants Fix for S6 (Not sure about N5/S6E+)
- updated goodlock apps
- Replaced EliteTuner with HadesKernel Tuner
- Most of the lags are gone
- AOD should be working on S6E+
- Fixed install issues with S6 Variants
- Audio freeze should be fixed
- Added OMC for VoLTE Users
- And many more stuff changed/added
Kernel
- Helios Pie V2.5
- Reworked the kernel to support Pie
- Added support for S6/S6E/S6E+ Variants
- Rebuilt from Noxxxious Source
- Unified S6/S6E
- Lags and other issues patched on pie
- Disabled tons of useless tracing and logs
- Updated helios scripts
Bugs and notes
- Camera Video recording only works in snapchat , candy camera etc
- GoogleCamera will NOT work
- Hotspot turns on but does not connect
- StockCamera is unusable (sometimes it works in landscape)
- Rotation gets stuck sometimes in UI but works in apps
- N9208 NFC is Disabled
- HWC is Disabled until further notice
- S6 IR Blaster is not supported for now
- MiUi Camera needs to be granted permissions manually through settings
Floyd v1.0
-initial release
F.A.Q
Good idea to read this F.A.Q While the rom is installing
NOTES :
Special Notes
-At all times, be sure to have atlteast 10% free internal storage otherwise random reboots may occur and loss of data
-Updating gametools (without installing navbar) will break it
-To avoid gaming issues, make sure GameBooster updates is uninstalled from App manager (show system apps)
-On first setup, let the phone update everything before using it
-to keep youtube vanced, untick autoupdates from platstore
-Q keyboard does not support most languages (you need to install language packs from xda look up yash92duster packs)
-if your apps are not getting internet, reboot
Floyd V5.0 F.A.Q
Samsung Camera Guide
-Samsung camera only runs when auto brightness is turned off
-VideoRecording : on front/back go to ProMode > ColorTone > Tone1 > Record
--Front camera only records well at 720P
--Videos recorded will be 24~30FPS
-Selfies : Long press cam icon > select selfie
--This will switch to front camera
--To switch to main > long press icon > select auto
Few notes about the samsung camera, it seems that on the S6 its not very stable. so the best way to lunch selfie is :
1) Long press camera icon > Selfie
2) if it FCs, just tap the camera icon again and DONT long press to pick selfie
Then to switch to back camera long press and select Auto, you should not face any FCs there
Floyd V4.0 / V5.0 F.A.Q
Q : No Simcard being detected
A : Disable / remove SIMLOCK From another device or ROM
Q : Games are Laggy/Pix-elated/Stutter/sucks/crashes
A :
1- settings > advanced features > gamebooter > turn it off
2- in twrp mount system then use file manager to delete system/app/GameOptimizingService
i forgot to remove this in V4 and it causes ALOT of issues with games (pix-elated graphics , lag , weird stretches etc)
Q : Device is running too hot
A : The best way to go about this is to follow @skywoker guide here : XDA you should still play around with the voltages to find what is most stable for you
Q : Whatsapp web QR not working
A : Better and newer workaround : Here
Old workaround :
For those, who have problems when trying to use Whatsapp Web:
1. Go to Developer Options
2. Change the Smallest Width to 443 dp (443 works for me, try bigger or smaller value)
3. Switch to WhatsApp and scan QR Code
4. Restore Smallest Widht to 411 again
credit: @vijayinani
Click to expand...
Click to collapse
Q : Samsung camera does not turn on
A : Disable auto brightness (idk why dont ask)
Q : Some apps lose internet after a while or at first setup
A : Reboot your device or change process limit in developer options to 2 (due to wifi implementation)
Q : What is the best camera app ?
A : For back photos use samsung camera, for videos and selfies use Footej or idan gcam or unixcamera
Q : Cant lower incall volume on US variants
A : Side-effect of using AOSP HAL, use hkTweaks > MoroSound > reduce earpiece volume
Q : How to use GEARVR ?
A : Download and install GEARVR Setup from APKMIRROR
P.S : it is very laggy. in order to fix that you need to edit system/build.prop and change SM-N960F to SM-N920C
However that is likley to break BixbyVoice. and maybe other FE specific features which are unclear now
Q : how to use GameTools ?
A : Due to prop being changed to N950F to support bixby, if you want to use Gametools go to settings > apps > show system apps if needed > gametools and UNINSTALL updates
P.S : You can also disable it from auto updating from there
Q : My gallery cant sync samsung photos from Cloud
A : A common bug on oneUI roms from samsung. we are waiting for an update
Q : How to get Root ?
A : Download Magisk and MagiskManager from the Official Thread . flash magisk.zip and install the APK
Q : Can i use SView cover ?
A : Only basic support is added (enable in aroma) i have not tested it further
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everything
Q : My phone does NOT boot help pls
A : Ensure you have LATEST AF bootloader and modem installed, did all the wipes, and did your house chores,
Old
-- Oreo version F.A.Q --
Camera works in apps that have their own jpeg processing, whatsapp, snapchat are some
HDR+ Might cause weird wobbbling in google camera, avoid it
For the most optimal feature set, Pick CSC instead of OMC
- In some countries OMC can lose feature sets
If you pick OMC be sure to select the RIGHT slection for simcard question at setup wizard
- Failure in doing that will keep the the popup and no simcard will work
- You can Pick CSC to avoid this or read the thread instructions
Q : Camera doesnt open (googlecam)
A : try to install manually from here
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and reboot if you flashed magisk
Q : There is SIM popup that keeps coming to ask me for restart
A : you DID NOT follow the instructions, Reinstall the rom and pay attention
Q : in the first SIM question in setup wizard, language is not english, what does it say
A : The RIGHT button is what you need to press, it will factory reset the phone (not touching your internal) and setup your /EFS with an OMC file that is linked to your simcard, so the rom will auto detect your CSC just like official samsung phones
Q : I dont see any EDGE panels after installing
A : Reboot the phone
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
P.S : These patches are only needed by Floyd V5
They have been integrated into V5.1
FloydV5 - NavBar Fix : Download
- Only use if you ticked NavBar in aroma.
FloydV5 - Q Keyboard language pack : Download
- Android 10 Keyboard does not support most languages so use that zip to install them
- Make sure to open the zip and remove most of the languages you dont use, otherwise it might not install due to size
- Thanks to @yash92duster
FloydV5 - CronosKernel V5.1 : Download
- This fixes a bug where the phone will reboot once it boots up
- Only affects very limited number of devices so dont flash it unless you have that issue
P.S : These patches are only needed by Floyd V4
PATCH 1 : G92XS/L/K Audio Fix
Audio Fix for korean S6/S6E Variants
Download : Here
Download mirror: Here
PATCH 2: GPS fix
For those N5/S6/S6E/S6E+ users facing GPS issues
(Such as no lock, no GNSS FIX or no offline gps etc)
Download Fix : Here
Download mirror : Here
So far only some S6 Devices needed this
Thanks @sammomin for sending logs of the issue and testing with me
PATCH 3 : No simcard on some devices
if you dont have simcard being detected, the issue is due to SIMLOCK. so using another Nougat ROM or a different device, Remove simlock and it will work
PATCH 4 : WifiHotspot Fix
Download : GoogleDrive
Download mirror : here
This will fix WiFi hotspot "failed to obtain IP"
P.S : Dont ask me about WiFi Sharing as our hardware does not support that afaik
PATCH 5 : Snapchat
Download : GoogleDrive
Download Mirror : AFH
Snapchat banning fix and 4K Video recording (using gcam / unix cam)
Some users reported snapchat banning them, it was due to a signature verification mod, so ive removed it.
Flash noblur/blur that should be self explanatory
4K Video recording patch thanks to @Cvolton
First comment, oh, this isn't YT, anyway i'll flash this on my G920F dude
ananjaser1211 said:
Enjoy, Please report S6/S6E Specific bugs here.
Click to expand...
Click to collapse
Kudos on a great ROM! You guys did some fantastic work here! Thank you for all of the time and effort spent putting this together.
Dowloading....
Biiiig Thanks :fingers-crossed: :good:
Gonna give it a try! Thanks for your hard work
Thanks for making this old device shine again .
ananjaser1211 said:
Enjoy, Please report S6/S6E Specific bugs here.
Click to expand...
Click to collapse
one ui v2.0 was my first entry to custom roms and i was supriced and i was so amazed by it.I used the rom for a quiet sometime and it was ok but it had so many bugs some were ok for me but after a while i tried 2 or 3 different roms that are stable and they were fine but i ws not getting the same feeling the same experience that i had with one ui rom i daily checked the thread for updates and today as the daily routine i checked the thread and wow it has been updated i was super amazed.I searched for the download links but they were not there so i thought it will take a day or two to get those but i recieved a telegram notice saying that new verison has released i rushed to the thread and downloaded it. wow it had so many options to choose ,love that. Im currently exploring it . By the way huge huge huge thanks for the developer and all the other people who made this possible . Thanks for giving a new life for this aging device.Love you guys a lot.
Rom is superb and gaming is also smooth. I have not encountered any problems as of now.. Great work done.. Thanks for giving life to our old device
Hey,
First congratulations for this, it's a really good news Pie (and especially One UI) is coming to our phones. By the way, it's really funny to see people are more hyped by a Samsung port rather than AOSP, who would have believed this couple of years ago ^^
The ROM is smooth even if the lack of HWC can be felt sometimes (freezes, etc). Everything works fine except one thing: in-call audio. Whether speakers or not, I can only hear sound for like a half of second then it mutes (the volume is at max), also switching speakers ON/OFF can produce a little freeze (the call duration counter freezes for like 4 seconds).
Except this and of course already known bugs (stock camera for example), nothing to report! I tried to force enable HWC by tweaking build.prop and the result is even better, it's very smooth I can only congratulate you and all the team behind for this work!
I come back to my original ROM since calls seems buggy but however whenever they get fixed I might switch back to it.
Model: G925F
iDroid27210 said:
Hey,
First congratulations for this, it's a really good news Pie (and especially One UI) is coming to our phones. By the way, it's really funny to see people are more hyped by a Samsung port rather than AOSP, who would have believed this couple of years ago ^^
The ROM is smooth even if the lack of HWC can be felt sometimes (freezes, etc). Everything works fine except one thing: in-call audio. Whether speakers or not, I can only hear sound for like a half of second then it mutes (the volume is at max), also switching speakers ON/OFF can produce a little freeze (the call duration counter freezes for like 4 seconds).
Except this and of course already known bugs (stock camera for example), nothing to report! I tried to force enable HWC by tweaking build.prop and the result is even better, it's very smooth I can only congratulate you and all the team behind for this work!
I come back to my original ROM since calls seems buggy but however whenever they get fixed I might switch back to it.
Model: G925F
Click to expand...
Click to collapse
Interesting, we are using AOSP 9.0 Audio hals at the moment, when tested earlier this month it was a mixed bag. on some variants it works right away, and calling again would result in no audio, calling one more time will have a different result and so on, however last few tests we did it worked most of the time, it sucks to hear but not unexpected. the rom got delayed a week due to S6 only call issues.
ill see if i can figure out what is going on, maybe we can use a different hal (on V2 the N7FE port we used note7 Audio HAL and that was flawless, for some reason it just doesn't work now)
ill see what i can do, thanks for the report and kind words
Sim Card not working on S6 G920F
Thank you very much!
Genie
us
I forgot to include the US variants fix in the rom. GG myself. T/W8 only, P probably wont work , and its for S6/S6E/S6E+/N5)
N5_US is for : N920T/N920W8/N920IDK | G928T/G928W8/G928IDK (Only Note5/S6E+ US variants)
S6_US is for G920T/G920W8/G920IDK | G925T/G925W8/G925IDK (Only S6/S6E US variants)
Download and flash the file that matches your device : GoogleDrive
Mega mirror : Here
ananjaser1211 said:
Interesting, we are using AOSP 9.0 Audio hals at the moment, when tested earlier this month it was a mixed bag. on some variants it works right away, and calling again would result in no audio, calling one more time will have a different result and so on, however last few tests we did it worked most of the time, it sucks to hear but not unexpected. the rom got delayed a week due to S6 only call issues.
ill see if i can figure out what is going on, maybe we can use a different hal (on V2 the N7FE port we used note7 Audio HAL and that was flawless, for some reason it just doesn't work now)
ill see what i can do, thanks for the report and kind words
Click to expand...
Click to collapse
This is what u mean right
Gdarkshadow said:
This is what u mean right
Click to expand...
Click to collapse
No, he's talking about AOSP 9 Audio HAL, because some S6 users have audio issues.
Same with mine. No audio in call G920F. Also the home screen cannot be switched to night mode. Other than these rom is so good and smooth.
In call audio is fixed. Reinstalled rom with data wipe. Thanks for this very nice one ui rom.
Very Nice Rom
I just flashed rom yesterday, and its very smooth
All feature's are working, have tried resurrection remix 7 which have so many lags
good job anan
just one thing is frustrating is camera in app's (NEVER MIND)
Thanks A lot:good::good::good::good:
crDroid 6.11
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
crDRom is a project which based on crDroid with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot LineageOS GSI, but can't boot crDRom - try to removing that file
UPDATE VERSION
base: crDroid 6.11
latest build: 2020.10.19
treble patches: v222+
SPL: 5 Oct 2020
FEATURES/CHANGES
• no in-built root
• changed Phh Settings "Main Icon"
• and Phh Settings moved to the bottom
• mobile networks on MTK should work
• tuning of the status bar, icons more tightly to each other
• added option to set statusbar icons spacing (need reboot to properly apply changes)
• fixed the display of the status of security patches (GSI specific)
• now some pre-installed Apps can be disables from Settings
• fixed offline charger to works in enforced mode (still not for all devices)
• fixed call recording in Dialer (not supports on all devices)
• deep sleep fix included (based on patch by @Hami_Do)
• on battery saver auto dark mode disabled, you can choice light/dark theme
• fixed QS tiles editor (don't followed columns number)
• slightly fixed system UI theme (QS tiles h-padding, search bar in Settings etc)
• few changes to reduce consumed resources - more space, more speed, more battery life
• in stock camera removed HAL3 green artefacts which exist on few Xiaomi devices
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• on my device (with stock vendor) Google Play certification passed without any patches and Magisk, just works out-of-the-box
• option to set system UI optimization level (use careful, do not set IPS level for OLED)
• fixed DeskClock widget (with the GoogleSans font was cropped)
• turned off the indicator flashing when the battery level is low
• added option "Swipe for notifications" for fingerprint scanner
• in Dialer added option to set fullscreen contact's photo
• reworked dark mode support for few apps (Files, Calculator, DeskClock)
• replaced apps: Gallery, Dialer, Messaging, Calculator, Keyboard
• French and Russian translations for crDRom custom settings
• for Mi A2 Lite LTE is set by default
• used Bromite webview
• updated Redmi 6 Pro overlay
• removed Updater (useless in GSI)
• fixed boot on Mi 10 (Lite), K30 (Pro)
• major interface speed improvements
• tweaks for Xiaomi Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
• changed minimal brightness level for Redmi Note 8 Pro
• initial Redmi 9 'galahad' overlay
• added DT2W support for QIN 2
• by default enabled LiveDisplay
• added custom Google Cloud restore option (Settings > Accounts)
• added few patches from GrapheneOS
*grayed options not realized yet
DOWNLOAD (CLICK H3RE)
vanilla, gapps: all architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan
projects: TrebleGSI • BlissROMs • LineageOS • Havoc-OS • GrapheneOS
re
Screenshots v222
Call quality is fairly bad on this
TheUndertaker21 said:
Call quality is fairly bad on this
Click to expand...
Click to collapse
you are the 1st man, who reported this
nobody in my tg group said about bad call quality
can you describe it, and which your device and vendor/kernel
An amazing rom. It has some downs on my device though. I'm using a device named Vestel Venus E4, you've probably never even heard about it. It has quad core cpu and 2 gigs of ram. On my device, this rom is a bit laggish. I mean it's fast but the transitions and the animations aren't smooth no matter how much I play with the animation scales on developer settings. Here is the other info that you may need about my device. I don't even want to change this rom maybe with some updates it will become smoother Thanks for this great job man
Etsyo said:
An amazing rom. It has some downs on my device though. I'm using a device named Vestel Venus E4, you've probably never even heard about it. It has quad core cpu and 2 gigs of ram. On my device, this rom is a bit laggish. I mean it's fast but the transitions and the animations aren't smooth no matter how much I play with the animation scales on developer settings. Here is the other info that you may need about my device. I don't even want to change this rom maybe with some updates it will become smoother Thanks for this great job man
Click to expand...
Click to collapse
well, try to add this line to the /system/build.prop
debug.sf.latch_unsignaled=1
or set this prop with adb/terminal with command
setprop debug.sf.latch_unsignaled 1
if this will fixed lags then send me result of commands
getprop ro.vendor.build.fingerprint
getprop ro.vendor.product.device
eremitein said:
well, try to add this line to the /system/build.prop
debug.sf.latch_unsignaled=1
or set this prop with adb/terminal with command
setprop debug.sf.latch_unsignaled 1
if this will fixed lags then send me result of commands
getprop ro.vendor.build.fingerprint
getprop ro.vendor.product.device
Click to expand...
Click to collapse
My device isn't rooted :/ And I couldn't figure out how to do this over adb shell in recovery mode. Could you give me some instructions?
You make the best gsis ?
Etsyo said:
My device isn't rooted :/ And I couldn't figure out how to do this over adb shell in recovery mode. Could you give me some instructions?
Click to expand...
Click to collapse
you can run all prop commands from adb without root, but not in recovery. just boot gsi and connect you phone to the pc and allow it to debug
then run on PC "adb shell" and run commands, which i gave
Just installed the GSI on my Oneplus Nord, runs buttery smooth, auto-brightness broken tho. Thanks
eremitein said:
you can run all prop commands from adb without root, but not in recovery. just boot gsi and connect you phone to the pc and allow it to debug
then run on PC "adb shell" and run commands, which i gave
Click to expand...
Click to collapse
I'm getting "device unauthorized" error on adb commands. No matter what I tried I couldn't get past it. I even tried a different computer which I haven't even used before but the problem still persists. I'm using your LEVEL 6 (IPS) setting on UI Speedup/Powersaving option under Display Settings. I think it's not bad for now but can you explain what those levels are? Because I couldn't find an explanation...
eremitein said:
you are the 1st man, who reported this
nobody in my tg group said about bad call quality
can you describe it, and which your device and vendor/kernel
Click to expand...
Click to collapse
I've tried many times to install crdroid, pixel experience and evolutions gsi but they all got stuck at bootanimation but other gsi like havoc and aosp work really good and boot up in 2 minutes please somebody guide me what's really happening
Moto G5s Android P Lineage OS 16 Vendor (there is no OEM Vendor):
#Bug
Using the edit panel option from the QS Panel breaks SystemUI (tiles don't do nothing, sudden lag spikes, crashes)
Restarting the device, or restarting SystemUI solves the issue, but trying to edit again breaks it again
@eremitein
Update:
Doesn't happen on Vanilla builds
Update 2:
Always happens with any Gapps installed (opengapps in this case)
Btw, is there any particular reason any optimization level above 2 makes the launcher become square?
Like the animations and recents panel?
Can I use this on my unlocked Huawei MediaPad T 5
its a Kirin 659? its only 8.0 vndk 26. (Legacy version)
I am currently on Los 16 from openkirin.
Thanks
Some random said:
Btw, is there any particular reason any optimization level above 2 makes the launcher become square?
Like the animations and recents panel?
Click to expand...
Click to collapse
it's normal
micbanand said:
Can I use this on my unlocked Huawei MediaPad T 5
its a Kirin 659? its only 8.0 vndk 26. (Legacy version)
I am currently on Los 16 from openkirin.
Thanks
Click to expand...
Click to collapse
i don't know
eremitein said:
it's normal
Click to expand...
Click to collapse
Oh, hmm...
Update (2020.09.30)
crDroid 6.10
September SPL
removed Updater (useless in GSI)
fixed boot on Mi 10 (Lite), K30 (Pro)
major interface speed improvements
reworked Speed UI overlays
have ARM A-only Go (1.5+Gb)
default AOSP bootanimation (for more generic)
Bromite WebView 85.0.4183.110
DOWNLOAD //all architectures
To be claim, i am NOT the maintianer, the dev or else, jut an user...
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. A big thank to the dev @eremitein
The dev made more roms that you can find on his github
If you want to have a tuto on how to flash it you can find it HEREDownload
All target builds
About
LiR is a project which based on LineageOS 18.1 with Andy Yan's and phhusson's Treble GSI patches. Built with all Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. System can run with SELinux enforced state, as an original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible with not all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method)
Changes
LiR 22.02.23
February 2022 SPL
to the Phh settings > Misc added new options: Restart systemUI and Dump system logs
backported changes from v402 device_phh_treble: Fix DT2W on Xiaomi Mi 11 Lite 5G, Rename our brand from "Phh" to "google", [Moto One vision] Set eSCO size, Disable ODM display overlay for OnePlus 10 Pro, Remove Mi 11 Lite 5G (renoir) from the audio effects fix
SuperUser app replaced by updated new one (special thanks for contributors ponces and Amy). if you have problems after dirty update you should first remove app from Apps settings then disable/enable Superuser in Phh settings
LiR 22.01.28
Spoiler
January 2022 SPL
[*]implemented Huawei IMS patches from Iceows
[*]fixes for for some devices (mainly with Oreo vendor, A-only) access for media files from some apps like WhatsApp or Telegram (based on Iceows's patch)
[*]backported changes from v400h device_phh_treble: All devices support unprocessed audio source, Fix audio for Umidigi X and Gome U9, Add Netflix ID for Mi 11 lite 5G
[*]patch for gsicharger removed, should fix offline charger animation for some devices (need test)
[*]added fix for Samsung J4 j4lteub with telegram and whatsapp camera (thanks •Johann• from tg)
[*]added support RMX2195: brightness, jackinput, fp
[*]fix touch issue for Realme 6 Pro RMX2061/2063 devices, based on this report
[*]volume dialog UI now follows rounded corners
[*]imported Realme 6 Pro RMX2061 overlay
[*]opt-out cringe TCP info parsing error (AAAAA....) on legacy kernels (commit)
[*]libprocessgroup: Do not remove uid cgroups directory (commit)
[*]GarbageMonitor tile removed
[*]
LiR R 2022.01.27
Spoiler
January 2022 SPL
implemented Huawei IMS patches from Iceows
added Seedvault app and option in Treble app for activating it
fixes for for some devices (mainly with Oreo vendor, A-only) access for media files from some apps like WhatsApp or Telegram (based on Iceows's patch)
backported changes from v400h device_phh_treble: All devices support unprocessed audio source, Fix audio for Umidigi X and Gome U9, Add Netflix ID for Mi 11 lite 5G
patch for gsicharger removed, should fix offline charger animation for some devices (need test)
added fix for Samsung J4 j4lteub with telegram and whatsapp camera (thanks •Johann• from tg)
trying to add support RMX2195: brightness, jackinput, fp (need test)
fix touch issue for Realme 6 Pro RMX2061/2063 devices, based on this report
volume dialog UI now follows rounded corners
imported Realme 6 Pro RMX2061 overlay
LiR R 21.12.23
Spoiler
December 2021 SPL
[*]phh patches v313 + some stuff backported from v400 device_phh_treble: fixes for Xiaomi Mi 11 Lite 5G, Motorola One Fusion Plus, Huawei P10, Realme GT ME, Blackview BV9500Plus etc
[*]trying to fix screen recorder bug on some devices (onemoretime..), thanks Iceows for the points
[*]added Phh option for enabling old cutout covering behavior in fullscreen mode
[*]Umidigi A7 Pro: put notch value from stock framework-res
[*]added patch for Huawei RIL signal indicator (by Iceows)
[*]patch for vold timeout (by Iceows)
[*]override system fonts with user-selected overlays (partially)
LiR R 21.10.12
Spoiler
(https://sourceforge.net/projects/treblerom/files/LiR/2021.10.12/)• October 2021 SPL
• latest available phh patches
• trying to fix VoLTE and VoWiFi icon switches in UI tuner (_need test_)
• trying to fix wrong VoLTE and VoWiFi icon color with dark theme (_need test_)
• picked patches from Andy Yan: "always render windows into notch cutouts" and "enable multiple snap targets in landscape mode"
• set system prop "ro.odm.camera=1" for all (_maybe can help with camera on some devices_)
• added fix overlays resetting on every reboot
• few Portuguese Brazilian translation
LiR R 21.09.15
Spoiler
September 2021 SPL
[*]latest available phh patches
[*]added VoLTE and VoWiFi statusbar icon support
[*]added VoLTE and VoWiFi icon switches in UI tuner (need test)
[*]trying to fix wrong VoLTE and VoWiFi icons color with dark theme (need test)
[*]reverted native AOSP Miracast screen sharing feature (already in the LineageOS code)
[*]added open source replacement for Qualcomm aptX libraries
[*]moar UI rounded corners target
[*]possibility tap outside to dismiss power menu
[*]fixed UI corner overlays for default icon shape
[*]fixed SafetyNet CTS for Pixel5 Spoofing option
[*]new updates for Redmi Note 9S/Pro/ProMax overlays
[*]added wifi 5GHz hotspot support for "daisy"
[*]fixed random SystemUI force-close with some of the icons styles (not default/circular/filled/rounded)
[*]option to switch back to pre-P mobile type icon style
[*]added UI tuner switch for VPN privacy icon
[*]fixed location icon margins for statusbar
[*]disabled WPA2 to WPA3 auto-upgrade
[*]plus other small improvements
LiR R 21.08.13
Spoiler
phh v312 treble patches
[*]August SPL by LineageOS team
[*]imported much patches from @sooti treble project: overlays and tweaks for Xiaomi Note 9 S/Pro/Max, overlays for Doogee Y8 and Umidigi A7 Pro, fix for IR blaster
[*]included improvements for Xiaomi Note 9 S/Pro/Max overlays from @Aarqw12
[*]added more Clang optimizations
LiR R 21.07.27
Spoiler
phh v310 treble patches
fixed random SystemUI force-close with some of the icons styles (not default/circular/filled/rounded)
in Display settings added UI rounded corners options (similar to G-Visual Mod)
debug.sf.latch_unsignaled disabled for mt6785 and sd450
LiR R 21.05.25
Spoiler
phh v308 treble patches
[*]reworked Pixel 5 spoofing patch
[*]fixed in-built screen recorder "low video quality" option
[*]added debug.sf.latch_unsignaled=1 (experimental)
[*]set LTE by default for 'lavender'
[*]fixed DT2W for Lenovo Z6
[*]more optimizations
LiR 2021.05.09
Spoiler
SPL 5 May 2021
phh treble patches v307
fixed Dialer crashing, which was wrong prop "ro.kernel.android.checkjni=1" in v306
reworked in-built screen recorder low video quality option (need test!)
added zero sensitivity for back swipe gesture
fixed clock ":" colon on the lockscreen
updated PixelProps to May SPL
removed patch for user build
disabled host and target debugging
fixed Treble App options info
added more optimizations
LiR 2021.04.23
Spoiler
phh treble patches v306
[*]April Security patch level
[*]reworked dynamic root, now it fully compatible with Termux
[*]folder for scripts moved from /sdcard/phh to the /data/adb/phh
[*]reworked SafetyNet helper, now we have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method)
[*]added separated Phh settings option to disabling vendor apps and overlays (you can still using old phh's variant or custom new one)
[*]added treble app to the allow-in-power-save list (to fix sounds in calls)
[*]tweaks and overlay changes for 'lavender' Redmi Note 7
[*]disable extra StrictMode features for userdebug builds
[*]fixed (again) network traffic for notched devices
[*]added power off option to the QS Reboot tile
[*]added fix for Sony Xperia X notifications led
[*]new offline charger fix, can help for some devices
[*]increased low video bitrate for screen recorder to the 4Mbps
[*]renamed autobrightness overlay to match phh style
[*]added 30 & 32dp rounded corners overlays
[*]set 0.5x animation scale as default
[*]set in build.prop 'user' type build
[*]overall system optimization
LiR 2021.03.18 (beta2)
Spoiler
March SPL
[*]phh treble patches v302+
[*]reworked dynamic root to avoid any conflicts with Magisk and other system modding apps
[*]included Magisk sbin PATH support, no need any external fixes - if Magisk can work on your device then just flash it
[*]added new option in Phh Settings to the spoof device as Pixel 5 - if SafetyNet option can't help you pass Google certification, then you can try disable it and enable "Spoof Pixel 5"
[*]reworked overlays and added some UI performance tweaks for 'curtana' & 'joyeuse'
[*]included patch to the allow audio for external screen recorders
[*]in stock Dialer added option to set fullscreen photo
[*]added option to disable notification headers
[*]added QS tiles 5x3 overlay
[*]interface speed up
First build 2021.02.21 (beta1)
Spoiler
actual LineageOS 18.1 sources
latest v300m+ phh treble patches
changes beside LineageOS by Andy Yan:
Phh Setting moved to bottom of all settings (please don't be scare)
all builds can be mounted as RW by-default (no shared blocks); also un-sparse format, raw ext4 image - you can easy mount it and modify
added enhanced dynamic root (Z) you can enable/disable superuser root without rebooting and with read-only system and even pass SafetyNet (see video). so, it should work on all treble devices
added new flexible variant of SafetyNet helper (Phh settings > Misc), you can using it without reboot, with system read-only and even without root (video here); use it before login to the Google account; should works for many devices, especially if device had SafetyNet with secure file (btw file with commands for safetynet stored in /sdcard/phh/secure - you can modify it, you can even put Pixel props there. i hope i gave for all users universal solution)
added replacement for InitD, you can put commands in /sdcard/phh/run and enable AutoRun option in Phh Settings
also added new options in Phh Settings: switch for cgroup freezer, disable logging, autobrightness overlay
added camera fix for some vndk28-lite devices (now camera works on Xiaomi Mi A2 Lite)
fixed media sound policy for A-only (thx HamiDo)
added patch for PiP mode on lowram devices (coop with AkiraNoSushi)
fixed bug in launcher, when fullscreen apps with forced landscape mode had gesture pill on the side faces
patch for fixing renaming file and moving files issue in MTP
fix for HAL3 vendor prop (cam2api option in Phh Settings)
selinux adb rule for some MTK devices
extendent mobile network menu
added screenshot quick delete button
network speed indicator with some changes for notched devices
added initial overlay for Realme C2 'RMX1941' with fixed power profile and improved (auto)brightness
added option Screenshot with three finger swipe gesture
in launcher "Clear all" button moved down
stock AOSP sounds replaced with Q Google sounds
Gallery2 replaced with SimpleGallery
tuning of the status bar, icons more tightly to each other
slightly changed visual style, color accent Pixel, fixed some visual design flaws
added option "Swipe for notifications" for fingerprint scanner
DPI change setting is now in the "Display" section
IMEI info is hidden under each available SIM card
added 0.2x, 0.8x & 1.2x to the animation speed selection menu (default set to the 0.8x)
for Mi A2 Lite, LTE is set by default
added display of SELinux status in Settings
turned off the indicator flashing when the battery level is low
added an custom options in the Display menu: statusbar padding, rounded corners tuning, QS layout, UI speed/powersaving
in stock camera removed HAL3 green artefacts which exist on Xiaomi devices
fixed status info of security patches (system and vendor)
in the launcher added double tap for screen-off gesture
on battery saver auto dark mode disabled, you can choise light/dark theme
removed annoying build number in QS footer
OOS style switches (picked from HavocOS)
added custom Google Cloud restore option (Settings > Accounts)
tweaks for Xiaomi Redmi 9 'lancelot' and Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
changed minimal brightness level for Redmi Note 8 Pro
import OnePlus 8 Pro 'instantnoodlep' overlay
initial Redmi 9 'galahad' overlay
disabled suggestions on Settings main screen
removed ugly divider lines in Settings UI
added DT2W support for QIN 2
updated Redmi 6 Pro overlay
lock icon disabled
reverted sbin folder for Magisk
added mark as read in SMS notification
added call recording in Dialer
improved screen recorder (stop dot and quality switch)
slightly improved speed of laucher's animations
Package installer: show current and new version on apk
added screenshot sound trigger
added QS tiles: reboot/recovery, mobile data SIM switcher
disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
option to reset battery stats (also to the opening battery stats just tap battery icon)
added back 2-button navigation overlay
enabled screenshot action for 3-button nav too
allow adjusting screen density to smaller sizes
reworked offline charger patch, need test (on my device at least screen blanked and no more loops)
initial overlays for Redmi Note 9S/Pro ('curtana' and 'joyeuse')
reworked overlay for Redmi 9 'galahad' - added (auto)brightness arrays and other fixes
tweaks for Xiaomi Redmi 'angelican' and 'dandelion' (brightness, audiojack)
force HAL1 for predefined package list (vendor.camera.hal1.packagelist prop)
removed screenshot icon from global actions
fixed USB options quick dialog
restored one-click to add/remove tiles
added fixes for Redmi Note 9 Pro 'joyeuse' (for audio, Netflix and fp touches)
other improvements for speed, performance, stability and user experience
GAPPS changes
image sizes around: arm64 2.9Gb, arm 2Gb, a64 1.9Gb
removed many Google apps, which you can easy get from Play Store
default launcher is Trebuchet
added Go Gapps builds too
Bugs
excluding fixes, the same as on all R GSI (in some cases does not work: broadcasting on TV, calls via BT; offline charging does not work normally for many devices etc etc)
I dl and flashed this version and it runs perfectly....
c'est bon mate.
ydd0ras said:
c'est bon mate.
Click to expand...
Click to collapse
merci..
Does it support 90hz display mode and is there any bug ? Thanks
Goangf4 said:
Does it support 90hz display mode and is there any bug ? Thanks
Click to expand...
Click to collapse
it seems that there isn't 90hz or didnt find it...
and there is an audio issue with wireless headset, the sound is with speaker, but it can be corrected manually....
the only I found...otherwise it's perfect...
To return to the MIUI ROM what should I do? Sorry but I'm new to the Xiaomi World
OzAcid22 said:
To return to the MIUI ROM what should I do? Sorry but I'm new to the Xiaomi World
Click to expand...
Click to collapse
download fastboot rom miui 12.5.5 from https://xiaomifirmwareupdater.com/miui/
and flash with miflash...
for help flash with mi flash search in google or xda
Masoud.Ser said:
download fastboot rom miui 12.5.5 from https://xiaomifirmwareupdater.com/miui/
and flash with miflash...
for help flash with mi flash search in google or xda
Click to expand...
Click to collapse
Thanks for the info
LiR 313 is out ....will post changelog on threads 1... Thanks Tom @eremitein
How is the default camera compared with miui camera?
dwensch said:
How is the default camera compared with miui camera?
Click to expand...
Click to collapse
Its los stock, so minimalistic, but use gcam and you re good to go...
how can install Gapps?
RichyValents13 said:
how can install Gapps?
Click to expand...
Click to collapse
With recovery or magisk or smartpack kernel
Goangf4 said:
Does it support 90hz display mode and is there any bug ? Thanks
Click to expand...
Click to collapse
Check phh treble settings > misc features > force FPS and check 90fps ;p I have this function on OctaviOS GSI but it could be the same.
mejsi said:
Check phh treble settings > misc features > force FPS and check 90fps ;p I have this function on OctaviOS GSI but it could be the same.
Click to expand...
Click to collapse
Goangf4 said:
Does it support 90hz display mode and is there any bug ? Thanks
Click to expand...
Click to collapse
I didn't notice any issue, works great. Check it on your own - I'm on OctaviOS, not LiR
You could also use this command:
Code:
adb shell setttings put system min_refresh_rate 90.0
Btw: I would love to install GSI but is there an Miui Camera apk for GSI? I take allot of pictures and only this forces me to use Miui.
dwensch said:
You could also use this command:
Code:
adb shell setttings put system min_refresh_rate 90.0
Btw: I would love to install GSI but is there an Miui Camera apk for GSI? I take allot of pictures and only this forces me to use Miui.
Click to expand...
Click to collapse
You can also use gcam ;p it works quite well
dwensch said:
Btw: I would love to install GSI but is there an Miui Camera apk for GSI? I take allot of pictures and only this forces me to use Miui.
Click to expand...
Click to collapse
I use 2 gcam mods who works pretty well, I can share it if you want, but no miui camera port on GSI...