Hello everybody!
Someone of you has noticed a poor WiFi reception on Hero?
I'm experiencing a poor WiFi reception in my house when Hero is connect to internet thru an access point.
What happen is that after WiFi connection has been established the phone tends to loose it and restart connection thru GSM/3G link.
That happen also if phone stay in the same place without moving around and also when phone is close to access point location.
Any idea about way to solve the problem?
Regards.
Alex
ale.agos said:
Hello everybody!
Someone of you has noticed a poor WiFi reception on Hero?
I'm experiencing a poor WiFi reception in my house when Hero is connect to internet thru an access point.
What happen is that after WiFi connection has been established the phone tends to loose it and restart connection thru GSM/3G link.
That happen also if phone stay in the same place without moving around and also when phone is close to access point location.
Any idea about way to solve the problem?
Regards.
Alex
Click to expand...
Click to collapse
Just an upgrade on issue...
If I turn off data connection thru GSM/3G and switch on WiFi seem that WiFi connection is stable so maybe issue come when both data connection are enabled...
Anyway is annoying shout down each time data connection on GSM/3D and power on WiFi!
Regards.
i believe wifi goes idle when not in use. so it connect to 3g or edge. However there is an app if not various in the market already to help keep wifi always on..
Do a search for wifi and see for yourself.
minogue said:
i believe wifi goes idle when not in use. so it connect to 3g or edge. However there is an app if not various in the market already to help keep wifi always on..
Do a search for wifi and see for yourself.
Click to expand...
Click to collapse
Thanks for suggestion!
At now I've solved turning off GSM/3G data connection when I'm at home anyway I guess that WiFi reception sometimes go away due to issue of the phone or maybe as way to save battery...
when that happen phone stay unconnected so I guess that should be better if I will check for apps that keep WiFi connection always working!
Alex
when the device goes into standby, the wifi is turned off to save battery poweer, and it will go back to 3G.
go into the wifi settings, press menu and select advanced.
select the timeout options
set to never and it will not turn off when in standby.
problem solved and you shouldn't have to turn off Mobile data, although with the settings widget on your homescreen turning mobile data off off each time is hardly going to ruin your life. in fact i tend to do this anyway, just cos i have spent too many years with windows mobile....
Here's an annoying bug I've found tho - on TMob UK
If I send an MMS from home, wifi on, it sits there, and doesn't send the message. Until I turn off wifi and 3G kicks in again.
Now I know for a fact that on my Magic, it was able to turn on 3g/HSPDA to send the message all by itself. Might have a look in thodse advanced settings tho to see if there is something I can do.. Not a biggie, just a bit of an annoyance.
Dayzz
Dayzee said:
Here's an annoying bug I've found tho - on TMob UK
If I send an MMS from home, wifi on, it sits there, and doesn't send the message. Until I turn off wifi and 3G kicks in again.
Now I know for a fact that on my Magic, it was able to turn on 3g/HSPDA to send the message all by itself. Might have a look in thodse advanced settings tho to see if there is something I can do.. Not a biggie, just a bit of an annoyance.
Dayzz
Click to expand...
Click to collapse
I too, have been doing a search on Forums all over Google looking for a resolution to this.
I have noticed if Wi-Fi is enabled I am unable to send or receive MMS messages.
It is an annoyance having to turn Wi-Fi off each time also I am never to know if someone has tried to send a message in the first place.
Currently using T-Mobile G2 (rooted with MCR Rom 2.8) on T-Mobile UK
Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment
Hi,
You probably already noticed that by your self..
When you're downloading something over 3G, and you turn the WIFI on during the process, there is no problem because it authenticates and connects the WIFI network and meanwhile keeps the 3G still alive.. it only shuts it off when the WIFI is completely connected and therefore the download is not hanging off..
Unfortunately it was not programmed backward.
When you are on WIFI and turning off the WIFI to move to 3G, or perhaps when you were at home and now walking away the range and so it automatically disconnects it, so it leaves the WIFI first and few seconds later it trigger the 3G and connect it..
During those few seconds you lose the connection and if you were on downloading process it hangs off..
So I was thinking, why not force the 3G on, connects, and only then, hang off the WIFI..
Any app that can do that? or any developer that might wanna pick up the glove?
I'm sure it will help few others but me..
Thanks ahead!
Anyone else having problems reconnecting to a WiFi connection, or even seeing WiFi SSIDs after disconnecting from WiFi?
This happens to me intermittently. I have 5 WiFi SSIDs in my house. 2.4G and 5G from the FIOS router, and the same from a WiFi access point on another floor at the other end of the house, and a Guest network from the AP. I can normally see all of them from any point in the house, as well as half a dozen from nearby neighbors. And my s9+ normally connects, automatically, to my primary 5G connection without any problem.
But occasionally, after being out and coming back home, or after the phone has been asleep for a while, it won' see any SSIDs. Not mine, or the neighbors. I've tried scanning for WiFi networks, turning WiFi off, waiting a few, and turning it back on, but it doesn't see anything, and won't connect. I've even tried manually inputting the name of one of my access points, but the phone won't find it.
Turn on WiFi automatically is on, WiFi power saving mode is off (although I've had the same issue with it turned on), Keep WiFi on during sleep was set to While charging. I've changed it to always, but it will be a while to see if that helps.
The only way I've found to get it to see WiFi networks again is to reboot the phone.
Oh, and other devices, including other Android phones, see all the SSIDs without issue.
Any thoughts or ideas?
I have te same issue here, I can't find a fix.
Mine will not connect to mobile date after I turn my wifi off. I have to reboot the phone in order to be able to make a call or use data. It all seemed to happen when a pop up came on to enable wifi calling. I can't figure out how to turn that off.
I don't have acupp1's issue with mobile data, but I seem to have resolved the WiFi connection issue by not letting the phone turn WiFi off during sleep. Haven't had the problem since I changed that setting.
I got the same problem since I rooted
Been trying to figure out if its a VENDOR Firmware problem or what. I do know that every developer says its a bug with the s9 when rooting. I've personally watch the live log on TWRP when flashing and seen where it mounts the VENDOR Firmware and then unmounted at the end. So it could possibly be a problem between TWRP and the s9 ROMs idk know exactly yet but I'm looking for a solution also. But I'm going to try what you did with your WiFi then report back here.
I have a problem where my the wifi stays disable. I will connect to a wifi network or when my phone does it then later it will say disable. I dont know why it just keeps disabling itself. I have a good connection at work and home. I have reseted the phone and it did not help. I don't know what could be the problem. Any one have an idea.