Hey gentlemen,
so the case is. I was on Epic Rom (MIUI 10) and installed Cardinal-AOSP yesterday. I personally didnt liked it.
- Now i cant install Miui 9, 9.5 or 10 only Android 8 based system.
- Even tried installing one of my backups, but no luck here.
- Tried Masik, restart after 30-60 seconds of loading again.
- Flashed lazy-flasher also
My device has TWRP Exclusive 3.2.1-(5/7). What can cause the problems? Hope you can help me out with a solution.
Update: Managed to get Epic rom 8.7.6 almost working, now it says my data is encrypted and i have to reset the phone, and than boots into twrp.
maybe, just maybe ok? you have treble version of oreo rom. and you have to un-treble to use non-treble rom. just try it maybe can help you
Get this rom: https://sourceforge.net/projects/orangefox/files/mido/ (credits to this site:https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933) Download the R7 zip flash it and try again.
OKAY, after a day I got út Sáta was corrupted, and was in f2fs state. Had to change it to exFAT4 and then I could install EpicEom by Escobar, wiped everything then installed again. Works like a charm.
All done on TWRP-Exclusive.
Related
Hi, I am trying to install cynogenmod or mokee rom and the device always gets stuck at cyno/mokee logo. it never goes beyond that. tried to wait for half an hour(waited for one hour twice).
Here is what I am doing:
I used TWRP but it wasnt working so i installed CWM, in both the recoveries I was wiping everything except sd card storage as my zip files were in the card. after that i flashed zip files(ROM & GAPPS). after that i rebooted to system. Am I doing it wrong? I am currently on 4.4.4 stock rom. Need help.
Thank you.
No one to help?
How can TWRP not work on your device? Install again TWRP via adb.
Flash latest twrp 3.0.2 and try
rian_tama said:
How can TWRP not work on your device? Install again TWRP via adb.
Click to expand...
Click to collapse
Rajendran Rasa said:
Flash latest twrp 3.0.2 and try
Click to expand...
Click to collapse
The problem wasn't with the recovery and I wasn't doing anything wrong. It was really too bad to know that the rom version I was installing had a bootloop bug in it. So I had tried two previous versions but they too had the same bug. And unfortunately I tried CONTINUOUSLY for two long days to install those same bugged ROMS as if God has put me in frustration mode. Tech fooled me right, lol.
Grab the November 8 version of Cyanogemod. There are issues with the newer updates.
Hi all,
I have a problem with my phone and I have no idea what to do now.
I am quite new to rooting, I am sorry if I say something stupid.
But anyway, I was having some fun with my working huawei untill I found out about root.
I went to my laptop and rooted my phone, installed superSU and installed this custom recovery twrp thingy.
Everything worked great untill I chose to install a custom rom (LineageOS 14.1).
Me being stupid without making a backup going to this twrp and wiping everything (wipe > advanced wipe > select everything) and after this install lineage OS from my sd card.
Which failed (dont know why) but I went on google and tried every single thing which didnt work for me.
So now I am stuck with a phone (huawei p9 lite vns-l31 dual sim) without a OS installed and I have no idea what to do.
Can anyone help me with installing my stock rom or a custom rom or any rom which works so I can at least use my phone?
I dont care what kind of rom (ofcourse I prefer Lineage Os) but any rom is ok, I just want and need to use my phone.
Extra information :
No I didnt remove fingerprint (red this on internet)
I had emui 5 (android 7)
Erecovery does not factory reset my device.
Hisuite does not reset my device too.
I dont have any software or roms or firmware (except fastboot/adb)
I can acces Fastboot and Twrp (v3.1.1-0) on my phone.
It just does not boot....
Though I learned that I from now on always make a backup.
Thank you in advance.
Does somebody have any idea what I have to do now?
Phone is still not working....
Weird!
When I flash first time flash ROM beta 6 version, it was working fine, even I used 2-3 days but after I thought let's try something new so, I flash beta 9 ROM, but that was too slow, so I again try to flash beta 6. but this time vibrating problem! Why? I tried several times!!
Details:
(read this thread & downloaded ROM from that thread where the ROM download link is given)(Thread link: https://forum.xda-developers.com/galaxy-j7/development/rom-t3753342/page1 )
NOTE: Both time I used same device, same ROM, same procedure, same TWRP version. (Yes, I tried to update the TWRP, but it was failed, so I again installed the same version, but not from the same source, I just search TWRP on Google and selected the old same version.) Also I don't think that this is the twrp problem, because other version are still working.
I installed the 5.8.020S ROM (Stock EUI) for Le 2 instead of Max 2. Luckily it didn't brick my phone.
When I tried to roll back to Lineage 16.0 (Pie) it didn't work. Tried a bunch of ROMs, Lineage 15 works, some others work but no Pie ROMs. My phone also resets itself on Lineage 15 every few hours for no reason. And the pre-boot screen has changed to a penguin instead of the "Le Eco" one.
Is it possible that when I installed the Stock EUI ROM that the boot partition and kernel were altered and that if I can get those back it will fix all my issues?
Or is it more likely that this is a hardware issue/irreversible?
Any suggestions? Thanks a bunch in advance. : )
Heyyo, boot partition is the kernel partition, so that should be overwritten by new ROM installs so that should be fine.. but yikes! I'd highly recommend using a fastboot ROM installer for EUI ROM for x2 just to ensure your device is as x2 as possible.
You could try this one from cuoco92 and use a PC with fastboot to install it. I believe there is readme files for instructions on how to do so.
https://androidfilehost.com/?fid=889964283620772795
If that fails? I would recommend qfil which will guaranteed reset your device to x2... albeit, with an older x2 developer build based on 5.6 I think? So from there I'd recommend upgrading to EUI ROM based on 5.9 like 19s and up before swapping to a custom ROM if you wanted to go that route.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Good luck!
It worked! Lineage 16.0 installs and runs just fine!
Also the stock ROM fixed my camera issue (original reason for going to stock) but lineage broke it again. At least I know it's not a hardware issue.
The weirdest thing is happening with my Redmi Note 5 Plus after flashing from a custom rom of Oreo to Android 9. I started with flashing the kernel with Dark Ages's, then I flashed Resurrection I think. It worked fine but once I went back to TWRP to install GAPPS my filesystem was corrupted, at least to TWRP it was but the rom was working fine. I decided to try another rom, PixelExperience I guess but after a successful install I just got a black screen and corrupted filesystem. Tried a couple more roms but the same happened. I tried another kernel but didn't change anything. Went back to Dark Age's. Then I decided to try to update the recovery to OrangeFox and this was a success (though I couldn't get fastboot to work, I had to install via twrp) and I'm not getting corrupted filesystems no more but no matter the rom I install I get the black screen. And now I installed Resurrection again and I still got the black screen but according to the phone's vibrations/sounds and screen dim the phone seems to be working fine, but with a black lit screen...Recovery works fine though...What is happening?
Ok I've been all day around this and I'm going crazy. What's the correct procedure to install these so called Treble roms? Cause I went head first from a custom rom on Android 8 to Android 9 using the standard procedure and it's not working. I have tried using diferent GSI's, not working. I've used the original Treble method with the DP4, not working.
Right now the best I can do is install Resurrection and all seems to work but recovery mode (TWRP and Redwolf) doesn't recognize internal storage. With orangefox the internal storage gets recognized but can't mount it. It's driving me mad, any suggestion? I guess the ultimate question is, how does one correctly installs a treble Rom on Redmi 5 Plus?
Not sure.. ...what is actually happening......but you needs to install the best recovery for Redmi 5 plus/note 5 which is Orange fox with their latest version 10.0
As you said about black screen...you need to wipe system, before flashing the custom rom this will allow the clean installation of flashing rom and system files.
anantrishabh said:
Not sure.. ...what is actually happening......but you needs to install the best recovery for Redmi 5 plus/note 5 which is Orange fox with their latest version 10.0
As you said about black screen...you need to wipe system, before flashing the custom rom this will allow the clean installation of flashing rom and system files.
Click to expand...
Click to collapse
I managed to get past the black screen problem with the installation of the original rom, I'm guessing it was that kernel I had installed, idk. I'll try one last time using orange fox and resurrection.
EDIT: With Orange Fox I can't mount internal storage or usb storage at all...
EDIT2: Wait a minute, "Enable MTP" has to be active right? My bad, I guess Orange Fox and Resurrection work! Now I'm off to install gapps and really test the rom, thanks for the help. I'm leaving the thread open so if anyone has similar problems to mine can contact me. Or if that's not a good policy I ask the mods to close this pls.
MTP is already enabled, all PIE rom are the same, installation went well but after installing it auto boot up and boom black screen.
Black Screen on lavender + ParanoidOS
the13thing said:
I managed to get past the black screen problem with the installation of the original rom, I'm guessing it was that kernel I had installed, idk. I'll try one last time using orange fox and resurrection.
EDIT: With Orange Fox I can't mount internal storage or usb storage at all...
EDIT2: Wait a minute, "Enable MTP" has to be active right? My bad, I guess Orange Fox and Resurrection work! Now I'm off to install gapps and really test the rom, thanks for the help. I'm leaving the thread open so if anyone has similar problems to mine can contact me. Or if that's not a good policy I ask the mods to close this pls.
Click to expand...
Click to collapse
Hey, im using lavender (Redmi note 7). I had installed Pixel Experience + OrangeFox. Later I clean wiped PE and installed Paranoid. Everything was successful. But when I booted up my phone, there is only a blackscreen after the redmi logo!!! I havent installed a different kernel, so how do i fix this?
I would just flash the firmware again through the recovery menu