Hello,
just want to share how i restored my IMEI on the Ulefone Power 3s:
1. Type on call pad: *#*#3646633#*#* This opens the EngineerMode Application
2. On Telephony tap scroll down to GPRS
3. In GPRS you type in your IMEI informations. Dont forget to click write IMEI after you finished.
4. Reboot phone
Thats it.
Hope i can help someone with this
Maybe its also working for Power 3, but I dont know.
cant change its showing (fail to write IMEI due to redio unavailable or something else)
pls help......
ajmal222!
If your phone is in flight mode, you can not change the IMEI number
Related
After a long research i decided to create this thread!
After na update my Optimus L3 got in a "No service" situation. The strange part is that i have signal and im able to acces the internet using mobile network (wifi off). After a long research i fugered out that my IMEI was 0 (zero). I finded a lot of solutions to this problem but none of then was compatible with my device or brand.
Its possible to perform this in an Optimus L3? How can i acces the Port Settings?
(ultimate solution for several LG devices)
Restoring IMEI
1. Connect phone by USB
2. Activate USB debug mode
3. Enter 3845#*920# in dialer if that doesn’t work try 3845#*925#
4. Select Port Settings -> Select CP Image Download
5. A new device should appear at let it install
6. Open Tutty and select serial protocol. Click on open
7. Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8. Type at%imei, it should display a dummy IMEI
9. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10. Reboot phone
Click to expand...
Click to collapse
sorry for my grammar!
Help these souls. LGE400 IMEI ZERO Problem
Im waiting For this **** too, i happen to have a dumb friend who did the same thing, its lame, i know, but the poor thing is almost crying cause his phone is new and he already screwed all up. so please if someone happen to have the solution for this, you would be a lovely person as to help these poor souls ^^ thanks in advance.
i`m waiting for any solution to this too. mi imei its (0) somebody help me to discover any solution
update
I got service using a 3g chip from another operator. IMEI still 0. this is so messed up
Ok guys, yesterday I was trying to flash a ROM and my IMEIs are erased and in attempt to get my IMEIs back my serial no is also erased, I have backup of my ROM can I get the Serial No. from backup of my ROM?
nice_guy75 said:
Ok guys, yesterday I was trying to flash a ROM and my IMEIs are erased and in attempt to get my IMEIs back my serial no is also erased, I have backup of my ROM can I get the Serial No. from backup of my ROM?
Click to expand...
Click to collapse
Hi
To set IMEI back using simple method follow th steps given below.
1. write *#*#3646633#*#* on your Dial pad. then an Engineer mode will ope.
2. Go to
Connectivity > CDS Information > Radio Information
3. For IMEI 1 select phone 1
Foe IMEI 2 select phone 2
4. In this window in irst line AT+ is already written,
just write E next to it, various commands will drop down,
5. If you selected phone 1, then select command AT+EGMR=1,7,""
If you selected phone 2, then select command AT+EGMR=1,10,""
6. write yor IMEI no. (you can find it on your mobile box or below battery) betwwen double inverted comma,
example. AT+EGMR=1,7,"911234567894567"
7. click on SEND AT COMMAND button,
8. Reboot your phone.
9. Check your IMEI using *#06# number on dial pad.
If your engineer mode is not opened, then go to settings > Apps.
then select all apps and open engineer mode.apk app
uninstall updates, and again try above steps.
If you are unable to do so try this one
MtkDroidTools 2.4.7 it will help you replace IMEI number
Press Thanks If I Helped You
I tried almost all the methods those are available except for one, that is SN_Station as my lappy is not accepting adb driver but none of the method helped me. Finally I went to Service center and I got my Motherboard replaced and now everything is working fine. I might have to write my wifi mac address using SN_Station and every time I flash new ROM I got a new wifi network named NVRAM Warning err 0x10, Though for now I have rectified my problem using this tutorial: http://forum.xda-developers.com/showthread.php?t=2197378
But I would write my wifi MAC address using SN_Station as my mac address changes every time I flash new ROM.
most of the users are facing lost imei problem....
so here is the solution...
first of all go to the dial menu of your mtk device.
1. enter *#*#3646633#*#* (this will make u enter in engineer mode)
2. select CDS information.
3. select radio information.
4. nw select phone 1 or 2 whosesoever's imei no. you want to change or fix.
5. nw type - 1st imei - AT+EGMR=1,7,"IMEI"
2nd imei - AT+EGMR=1,10,"IMEI"
6. then hit send command and reboot
congratulation You have fixed the bug.
In some devices it shows an error like "cannot be used in user build"
1. so this condition.... the easiest solution is to Give space after "AT+"
like:- AT+ EGMR=1,7"987879678564556"
remember 1 thing EMEI no. must be of 15 letters.....
Thankyou
-Navneet Singh :laugh:
If this doesn't work and you are using mtk chipset I would suggest you to use Maui meta or sn writer they have a lot of tutorial on YouTube I hope it helps
:angel:As we all know that in today's scenario most of the peoples are facing 'imei' issues,
due to which there mobile network has been lost..
so, I have solution of it....
It works for all devices but dont use it for wrong purpose...
I prefer you all to only enter your origional imei no. not the fake one..
and also dont change your imei no.
now here is the procedure, how to fixed your imei related bug....
Rooted device isn't needed for it..
applicable for both rooted or un-rooted device...
----------------------------------------------------------------------------
first of all go to the dial menu of your mtk device.
1. enter *#*#3646633#*#* (this will make u enter in engineer mode)
2. select CDS information.
3. select radio information.
4. nw select phone 1 or 2 whosesoever's imei no. you want to change or fix.
5. nw type - 1st imei - AT+EGMR=1,7,"IMEI"
2nd imei - AT+EGMR=1,10,"IMEI"
6. then hit send command and reboot
***congratulation You have fixed the bug.****
In some devices it shows an error like "cannot be used in user build"
1. so in this condition.... the easiest solution is to Give space after "AT+"
for eg:- AT+ EGMR=1,7"987879678564556"
remember 1 thing 'EMEI' no. must be of 15 letters.....
and use only origional 'IMEI' no.
Thankyou
-Navneet Singh
===============================================================================
It would be so good of any one of you to help me for this problem;
Recently, using SP Flash Tool, I accidentally chose the "Format All + Download" option when flashing a ROM to my Lenovo A850. I managed to flash the ROM but the biggest failure is, I cannot call and use data connection. I also have an error called "NVRAM Warning: Err 0x10" at the Wi-Fi section. At my notification bar, it shows "Invalid IMEI".
My phone is Dual SIM.
I somehow managed to fix my lost IMEIs by entering EngineerMode. After fixing and rebooting my phone, my notification bar showed "Emergency Calls Only" but I placed a working SIM in my phone. I still could not call and use data. I am sure that I lost many important things (MAC Address, IMEI, NVRAM, etc.) when I formatted my phone using SP Flash Tool.
I am clueless on how to fix this problem. I don't know what I should do. I just want my phone to be able to call. If not my Lenovo A850 is useless. I am so frustrated now and I am so scared.
If any one of you are able to help me, PLEASE NEVER HESITATE TO HELP ME. This issue is so serious that it doesn't let me to have a peace of mind.
PLEASE I BEG YOU DON'T IGNORE THIS PLEASE!!! Thank You for your kind attention!
Hi !
In order to fix the "Invalid IMEI", you have to :
Dial *#*#3646633#*#* then go to "Connectivity -> CDS Information" then click on "Radio information" then if your phone is dual SIM, press Phone 1.
In the textbox with writen "AT+" click on it then select AT+EGMR=1,7,"" and between the quotes, write your IMEI 1 number.
If you have an error "This command is not allowed in UserBuild", simply add a space between EGMR and AT+.
It will look like that : AT+EGMR=1,7,"YOUR IMEI HERE"
And for the NVRAM error, simply follow this guide : https://forum.xda-developers.com/showthread.php?t=2730486
Have a good day !
Hi! Thanks For the Reply.
SharkEzz said:
Hi !
In order to fix the "Invalid IMEI", you have to :
Dial *#*#3646633#*#* then go to "Connectivity -> CDS Information" then click on "Radio information" then if your phone is dual SIM, press Phone 1.
In the textbox with writen "AT+" click on it then select AT+EGMR=1,7,"" and between the quotes, write your IMEI 1 number.
If you have an error "This command is not allowed in UserBuild", simply add a space between EGMR and AT+.
It will look like that : AT+EGMR=1,7,"YOUR IMEI HERE"
And for the NVRAM error, simply follow this guide : https://forum.xda-developers.com/showthread.php?t=2730486
Have a good day !
Click to expand...
Click to collapse
Hi. Thanks for your help. I fixed NVRAM and IMEI. But still, I cannot call and use data even after I fix IMEI and NVRAM. The notification bar shows "Emergency Calls Only". I have inserted a working SIM Card but it is not being detected.
How will I get my phone to call?
Thank You very much!
Maevinarsh said:
Hi. Thanks for your help. I fixed NVRAM and IMEI. But still, I cannot call and use data even after I fix IMEI and NVRAM. The notification bar shows "Emergency Calls Only". I have inserted a working SIM Card but it is not being detected.
How will I get my phone to call?
Thank You very much!
Click to expand...
Click to collapse
Hi to fix that correctly , first root your device but fbefore that enable USB Debugging :
1. You can use KingRoot.apk , this one work for me if it doesn't work for you search for iroot.apk or frama-root.apk or some other.
https://kingroot.en.uptodown.com/android
2. Download SN Write tool ( we will use to put our Original imei number ).
https://snwritetool.com/download/sn-write-tool-v1-1752
3. Download MTK droid tool 2.5.3 (we need for restoring nvram backup) .
https://androidmtk.com/download-mtk-droid-tool
4. Download nvram backup for your device A850
https://mega.nz/#F!CQ1jjZSb!3wlZPapiIuRTuiqVWt4jKg
5. adbd Insecure v2.00 (install app just in case if your device is not recognized in MTK droid tool)
https://forum.xda-developers.com/sho....php?t=1687590
7. BusyBox.apk (install app just in case if your device is not recognized in MTK droid tool)
https://busybox.en.uptodown.com/android
Once you do that run adbd Insecure v2.00 app and check enable insecure adb now connect your phone on pc and run MTK droid tool , if is your device recognised press root to grant SU rights for root shell and click on OK.
now click on IMEI /NVRAM now click just on Restore choose nvram file which you downloaded put .bin file .tar file ignore and click on Reboot.
Now it should be working again .
To restore your Original imei , run SN Write tool go to System config check IMEI and check IMEI dual if your phone support dual sim and now load:
Modem DB and AP DB from data base folder which you can find inside your stock firmware make sure you don't make mistake by puting AP on MD1_DB or Modem DB on AP_DB click on Save now click on START , now you will see popup , write there your original IMEI 15 digits numbers click OK , take out the battery from your phone and put back now plug your device .
Once the process is finish you will See PASS your device will reboot and when is finish just exit from SN writter tool .
Follow this video if is easy for you :
https://www.youtube.com/watch?v=4uSxXFbzhZs
Good Luck