A while ago, I had TWRP and magisk working. I decided to try and install xposed from the magisk repository, which ended in a bootloop, so I restored the phone using eRecovery.
After this, I installed TWRP and attempted to install magisk again, which led to a bootloop once again - this happens every time I install magisk.
I have tried using uninmod, which just displays no modules to uninstall when I use it in the terminal, and I have tried mounting magisk.img to a folder, but this just contains "lost+found" and no modules.
It would be a great help if someone could offer some advice on how to fix this, because I hope to flash EMUI 9.
Wellp, i have been trying to install TWRP, magisk and maybe a custom kernel but i just get it bricked.
I followed the instructions (Typhus guide) to install twrp but when i try to boot into system it will keep rebooting into TWRP no matter what i do, in fact tried installing a custom rom and it will still rebooting in twrp until eventually it will go into fastboot and thats it, i reinstalled the system via fastboot and now evertythings fine, this device is a little confusing but i will appreciate your help in advance.
Hello Developers, I just updated my phone to the latest 11.0.4 which was sent via OTA, the problem is that after flashing magisk phone is booting up and then shutting off automatically.
Also, while flashing Magisk the twrp says that there is no ROM installed. I'm using redwolf recovery and magisk v20.3.
Please help. Cheers
download the zip file of android 10 based miui 11 and flash it via recovery and then magisk(without reboot).
then your phone will boot.no need to format or delete.
EDIT: flash the magisk 20.2(because i had flashed 20.2 after facing the exact issue)
I had a boot loop trying to install a module.I am in build 11.0.11 without twrp.I used the command adb wait ... to remove modules via adb but the problem didn't solve.After that I reinstalled the stock rom and the phone reboots. But when I tried to reinstall magisk using the patched img via adb I had bootloop again so I reinstalled again the rom. What can I do to solve the problem?
You are probably flashing the wrong boot.img for the firmware you are on perhaps?
Make sure it is the patched.img from here you flash https://forum.xda-developers.com/mi-a3/how-to/guide-how-to-root-mi-a3-magisk-t3958509/post82207833
Credits: @Sapper Morton
Thanks for the answer, but it isn't the boot.img, the specific module (sony music!) was the problem..
At last I installed twrp using the q- base twrp.img and I disabled this module via twrp and the magisk manager for recovery....The phone booted normally with the others modules to work fine...
Hi all, my first post here.
I recently bought this phone thinking it was customizable. Every tutorial I have tried has failed and required a re-flash to stock ROM using MIFlash.
I have tried custom ROMs, GSI ROMs, 64 bit, 32 bit, etc. I tried using Magisk 21.0 to root, it appears to work, but I believe the boot.img patching isn't currently working on this particular phone.
Most tutorials I have tried are very simple and use TWRP to flash the OS img file, then reboot and enjoy. Some suggest flashing vbmeta.img to prevent boot loop, but, boot loop happens anyway. I have TWRP installed and working, so far, that is all I have had success with.
Can this phone still be customized at all?
Update: I achieved root on the stock ROM. If anyone is interested I'll post the exact instructions.
stvmnn said:
Hi all, my first post here.
I recently bought this phone thinking it was customizable. Every tutorial I have tried has failed and required a re-flash to stock ROM using MIFlash.
I have tried custom ROMs, GSI ROMs, 64 bit, 32 bit, etc. I tried using Magisk 21.0 to root, it appears to work, but I believe the boot.img patching isn't currently working on this particular phone.
Most tutorials I have tried are very simple and use TWRP to flash the OS img file, then reboot and enjoy. Some suggest flashing vbmeta.img to prevent boot loop, but, boot loop happens anyway. I have TWRP installed and working, so far, that is all I have had success with.
Can this phone still be customized at all?
Update: I achieved root on the stock ROM. If anyone is interested I'll post the exact instructions.
Click to expand...
Click to collapse
Hi.
I´m interested. I´m not able to root the MI 8A MIUI 11 global 11.0.2.0 QCPMIXM. I achieved install TWRP . But I can´t install MAGISK . It don´t show me any error, but it isn´t installed. I ´ve tried many versions 20.0, 20.1, 20.2, 20.3 20.4 21.0 and 21.1. neither of them are successfull with TWRP.
Neither with magisk manager apk 7.5.1 and above. These are installed but then I download magisk 20.4 version, but this isn´t installed.
how did you it? please.
Yajirobai said:
Hi.
I´m interested. I´m not able to root the MI 8A MIUI 11 global 11.0.2.0 QCPMIXM. I achieved install TWRP . But I can´t install MAGISK . It don´t show me any error, but it isn´t installed. I ´ve tried many versions 20.0, 20.1, 20.2, 20.3 20.4 21.0 and 21.1. neither of them are successfull with TWRP.
Neither with magisk manager apk 7.5.1 and above. These are installed but then I download magisk 20.4 version, but this isn´t installed.
how did you it? please.
Click to expand...
Click to collapse
Your bootloader needs to be unlocked and USB debugging enabled first of course. TWRP Recovery should be installed.
To do this, you need the adb and fastboot binaries installed on a PC/Laptop. I use Ubuntu and installing these is trivial via apt package manager:
Debian based:
Code:
sudo apt install adb fastboot
RedHat based:
Code:
yum install adb fastboot
If you use Windows, the install and use of these binaries is a little different. I don't use Windows so you'll have to do a quick search to find out how to install and use these binaries. The commands listed below will work no matter what OS you use.
Connect your phone to your PC/Laptop via it's USB cable and reboot it to TWRP Recovery:
Power off the phone, then power on while holding the volume up button until you see the TWRP logo. Log into TWRP to decrypt.
Next, you need to pull the current boot.img from your ROM to patch it for root access:
Code:
adb shell dd if=/dev/block/by-name/boot of=/sdcard/boot.img
There should be a boot.img on your phone's internal storage, copy it to your PC/Laptop. From TWRP, reboot your phone to fastboot.
Now, we'll use this most excellent, free resource to patch the boot.img file which will give root access:
https://patcher.yaalex.xyz/
Check the 'Include Magisk' checkbox on the website before submitting image.
Important: After you upload your boot.img file to the website, be patient. This could take 10 minutes or more to complete, just wait until you get a prompt to download the patched image. You will be provided a patched_boot.img file from the website once it is finished.
Finally, all you need to do is flash the patched_boot.img to your phone:
Code:
fastboot flash boot patched_boot.img
Boot your phone to the ROM:
Code:
fastboot reboot
Install Magisk Manager if you haven't already, and enable Magisk Hide in the settings. Magisk Manager should report root access is available and SafetyNet test should pass.
I typed all this up from memory so if you run into trouble or are confused by any step, let me know and I will gladly clarify/fix the steps.
I hope this helps others achieve root on this phone. Let me know how it goes and happy de-bloating!
Rollback instructions:
If your phone fails to boot don't panic. You can restore your original boot.img if needed to regain access. Reboot your phone to fastboot:
Boot phone while holding the down volume button until you see the fastboot logo.
Next, flash the original boot.img to the boot partition:
Code:
fastboot flash boot boot.img
Now just reboot to ROM and all should be restored:
Code:
fastboot reboot
stvmnn said:
Hi all, my first post here.
I recently bought this phone thinking it was customizable. Every tutorial I have tried has failed and required a re-flash to stock ROM using MIFlash.
I have tried custom ROMs, GSI ROMs, 64 bit, 32 bit, etc. I tried using Magisk 21.0 to root, it appears to work, but I believe the boot.img patching isn't currently working on this particular phone.
Most tutorials I have tried are very simple and use TWRP to flash the OS img file, then reboot and enjoy. Some suggest flashing vbmeta.img to prevent boot loop, but, boot loop happens anyway. I have TWRP installed and working, so far, that is all I have had success with.
Can this phone still be customized at all?
Update: I achieved root on the stock ROM. If anyone is interested I'll post the exact instructions.
Click to expand...
Click to collapse
Iirc redmi 8a is an ab device, and yes this device is as customisable as any other Qualcomm. What gsi image are you flashing?
Actually he is not way off ..... i am NOT able to find a Custom Non MIUI ROM with full VoLTE support. VoLTE fix for GSI's ( if at all it worked ! ) does not work for Havoc. twrp root is all good. I want a NON MIUI ROM that can regional variants ( Europe and Asia ) and supports VoLTE