Just got this case and am really liking.
Much thinner and lighter than I expected. Much lighter than book cover.
Like the pen holder
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Super easy on off. Perfect fit of all ports and speakers
Only realcomplaint is no kickstand
https://www.amazon.com/Poetic-TurtleSkin-Protection-Protective-Silicone/dp/B07G5MZCFB
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
crissx said:
Hi. I also ordered from Poetic, waiting for delivery. I have a question : The navigation bar is easy to access ?
Click to expand...
Click to collapse
The case gets in the way a little but still useable
I just got this same case. This is a bit of an issue for me:
Good grippingin on 2 sides. Kinda loose when gripping on edges with pen or camera cut out.
Click to expand...
Click to collapse
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
mistermojorizin said:
I just got this same case. This is a bit of an issue for me:
Actually, for me it's bad on 3 sides, top, bottom, and s-pen side, but i don't grab by the top or bottom too much. Kinda feels like it could fall out of the case, and the side with the S-pen, just feels like a handle that I intuitively try to grab, especially because it doesn't have a kickstand, I wanna grab it on one side.
Click to expand...
Click to collapse
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
gottahavit said:
Agree on spen edge and cutout side, but no issues with other edges. I'm really liking this case and haven't switched back to the book cover even once yet.
Click to expand...
Click to collapse
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
mistermojorizin said:
I have gotten more used to it. I will probably keep this case on until a more rugged case comes out, preferrably with a kickstand. Also sort of thinking of whether there's a case I can put over the top of the case, maybe a UAG exoskeleton.
Click to expand...
Click to collapse
Really wish they made the UAG Metropolis for this. Had on an ipad pro and the tear away cover is fantastic. Love that case(Hated IOS though and never really used it)
Related
i wish there was a barely there case for this phone. i do not care about the front but in the back it is so slippery in the hand that i need something. Does anyone else knows any other options
I actually just bought the universal kit from egrips: http://www.egrips.com/store/product_info.php?products_id=2
It works great, I used the thin strips on the sides of the battery cover and a small strip on the back. You have to trim one of the thin strips down because of the camera button, but so far seems to work perfect. Shipped quick and arrived in a couple days US mail.
I was just trying to find a good solution for a better grip on the phone, it really does not provide any protection.
cswroe said:
I actually just bought the universal kit from egrips: http://www.egrips.com/store/product_info.php?products_id=2
It works great, I used the thin strips on the sides of the battery cover and a small strip on the back. You have to trim one of the thin strips down because of the camera button, but so far seems to work perfect. Shipped quick and arrived in a couple days US mail.
I was just trying to find a good solution for a better grip on the phone, it really does not provide any protection.
Click to expand...
Click to collapse
Will you be kind enough to post the pictures of your phone with the strips on ?
vikramdhani said:
i wish there was a barely there case for this phone. i do not care about the front but in the back it is so slippery in the hand that i need something. Does anyone else knows any other options
Click to expand...
Click to collapse
get something like the invisible shield or other full body wrap. It has a rubbery texture so the phone is no longer slippery.
That's actually pretty cool and without the goofy rubberized cases tmo has to offer.
Sorry, it has been a busy couple days. Here are the small eGrip strips on the side of the Slide. The photos are not the best...
I used eGrips because I am pretty familiar with their products. It is the same material that the "dash pads" are made which are used to prevent items from sliding across your dash.
cswroe said:
Sorry, it has been a busy couple days. Here are the small eGrip strips on the side of the Slide. The photos are not the best...
I used eGrips because I am pretty familiar with their products. It is the same material that the "dash pads" are made which are used to prevent items from sliding across your dash.
Click to expand...
Click to collapse
Pics looks nice and now i am seriously thinking about them as well
egrips discount coupon code
Hi everyone, use the discount code "facebook" to get 20% off.
I recommend the black strips for the side of the device pictured, but the Clear strips work very well too, and they have a stronger adhesive, as seen on the iPhone 4 here:
egrips.com/iphone4
Matt Malone
egrips - Partner
vikramdhani said:
Pics looks nice and now i am seriously thinking about them as well
Click to expand...
Click to collapse
Hey guys, I just ordered a couple of these:
http://www.amazon.com/Skque-Black-Silcone-Transformer-TF101/dp/B006JJ8ZU8/ref=sr_1_45?s=electronics&ie=UTF8&qid=1323510433&sr=1-45
I've been looking for a while, there's not many silicone cases for the transformer and I haven't seen these posted here so I thought I would share. They have a few different colors and they don't have a funky design on the back. I'll snap some pics when they get in and add them here along with a mini review.
That looks a lot like the Sikai case but is only $8 compared to $17! Nice!
Hmm, I wonder if you could chop off some silicone to make it compatible with the dock (although I guess it wouldn't close all the way still).
degeneration said:
Hmm, I wonder if you could chop off some silicone to make it compatible with the dock (although I guess it wouldn't close all the way still).
Click to expand...
Click to collapse
from the looks of it, it should fit the tablet while it's docked (see the slots on the bottom edge for the connector and the locks?)
dohclude said:
from the looks of it, it should fit the tablet while it's docked (see the slots on the bottom edge for the connector and the locks?)
Click to expand...
Click to collapse
Think your missing that the tablet seats in a groove that fits tight around the bottom edge.
zedorda said:
Think your missing that the tablet seats in a groove that fits tight around the bottom edge.
Click to expand...
Click to collapse
I am missing that... because I don't have the keyboard dock :cries:
Silicone is soft just force it on there lol
Thanks OP, picked up one even though I have two portfolio cases already. I think this will do at home use but will probably be a lint magnet.
AstroTrain said:
Thanks OP, picked up one even though I have two portfolio cases already. I think this will do at home use but will probably be a lint magnet.
Click to expand...
Click to collapse
I'll take lint over scratches and dents any day.
goplaycheckers said:
That looks a lot like the Sikai case but is only $8 compared to $17! Nice!
Click to expand...
Click to collapse
This wasn't there when I bougth the Sikai case two weeks ago. Paid too much now!
from the pictures it is hard to tell if the case has the proper cutouts for the power and volume buttons. Can anybody confirm that it does.
kd5dmg said:
from the pictures it is hard to tell if the case has the proper cutouts for the power and volume buttons. Can anybody confirm that it does.
Click to expand...
Click to collapse
I just got the case delivered today. There are no cut out for the volume and power buttons, they are coverd with raise tabs so u know which is which. I prefer this way to cover the buttons so less chance of grime getting into those slots. The fit is good very snug but if u hold it in portrait mode the sides tend to strech out a bit, wish it covered more of the tablet. Very nasty smell on first use and so far don't seem to have much issues with lint.
I will most likely use this at home as both of my portfolio cases tend to put too much weight on the tablet. For 8 bucks what is not to like?
my bezel frame around my screen came off so I hadda do a ****ty super glue job. do u think this case will not only hold everything together but.hopefully protect it from further damage?
Sent from my Galaxy Nexus using xda premium
phillybizzle said:
my bezel frame around my screen came off so I hadda do a ****ty super glue job. do u think this case will not only hold everything together but.hopefully protect it from further damage?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, the sides are loose, you can move them with your thumb. What you need is probably a hard shell back cover case that is tight against the edges (or a portfolio case), don't know if they make them. these covers don;t really do any protection except for scratches on the back, you drop them any distance your tablet is history.
Link
Alright, The case the box came is in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Zenus cases are the best I've seen so far for the Galaxy Note. I was thinking of getting this one as well but the color combinations just don't do it for me. Also, there's not cutout for the front speaker so it would be a little awkward to have to hold the front leather part back every time. I like that the case clips onto the metal part on the side and doesn't rest on the top of the phone so that a screen guard will thankfully be left untouched. I also love that it has a stand (The only reason I'm not getting the Zenus Masstige Stripe Case). I was wondering though, when the stand is set up, does the little latch (idk what it's called lol, the little thing used to clip on to the front cover to close the case) hide a little part of the screen since presumably, it'll be hanging down a little bit?
EDIT: Ordered it lol. It may have its flaws but it's the best I could find at its price range.
I have one of these (different colors, but this color looks great).
They are extremely high quality. As good or better than Vaja, for instance.
I've posted this before, that make sure you pay more and get the leather ones, as they have a few lines and some of the lines aren't as good quality.
This particular case is just great. The flap is a tad annoying but well worth it overall.
Note: one thing worth mentioning is that they are very light also.
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Hmmm...that's a tricky one. Obviously, it clips in tightly and securely so it might damage the skin during insertion and removal but once it's sitting in there, as long as you don't constantly remove it, it should be fine. I would recommend going to a store and testing out either this case or similar leather cases, but then again, if you harm the skin in the process, then this whole discussion is useless lol. On another note, why use a skin? The note is such a beautiful sleek beast. I wouldn't want to hide away any of the sides or take away from the beautiful protruding glass. That's why I hate my current Capdase Jacket XPose and am going for this case. Just increases the beauty XD. Anyways, yes, back on topic, I wouldn't recommend using a skin with this cover but hopefully someone who's actually tried it will reply.
Side-note: I ordered the Wine-Red / Dark Brown version
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Here's a Flip case that would most likely not interrupt your skin.
Link
xCeejayy said:
The aluminum bumper wasn't doing it for me so I was looking around and I found this case. The colors are pretty subtle and calm. I'll update this with a review / pics of the case on when I receive it. I just wanted to share this case with you because it just looks so nice.
Link
Alright, The case came in the box it comes in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Click to expand...
Click to collapse
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
drkalo said:
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
Click to expand...
Click to collapse
I tried this and it works fine for me Maybe contact Zenus for another one?
xCeejayy said:
I tried this and it works fine for me Maybe contact Zenus for another one?
Click to expand...
Click to collapse
I got these symptoms after a couple of days usage. I contacted the dealer and got a substitute with Capsule Stand Slide Series - White / Lime
When I got my Note off CL came with the Eel leather case. It's slick but I wish it was the capsule.
Sent from my SAMSUNG-SGH-I717 using xda premium
Today I received my Spigen Slim Armor w/Air Cushion Technology. Sorry, I wanted to post a link to the Amazon page so everyone could see what it looks like, but you will all have to Google/Amazon it
First impression is that it fits snug and has great cutouts. There is a full rubber cover and then a hard shell that wraps over the middle portion of the rubber cover. The hard shell is a bit slippery but overall it is a well put together case and leaves more than enough space for a tempered glass screen protector. The only unfortunate thing about this case is that there is a hole where the buttons on the back of the phone are, really wish there was a cover for the buttons as well but I have yet to see such a case, like the Otterbox cases for the LG G2.
Overall it is a good case and worth the price.
I purchased this case a the Verizon store when I got my phone, overal great case offeres good protection while keeping the phones slimness, just an fyi if you order the white one it has like a shimmery look, my wife says It looks like it's for a woman
I have this case too and I like it. FYI the white case is just as shimmery as the OEM white backplate. Hell, Spigen calls it "Shimmery White..." Oh and it's $9.99 right now.
http://www.amazon.com/Spigen®-Scree...=1406323636&sr=8-7&keywords=spigen+lg+g3+case
oo3 said:
I have this case too and I like it. FYI the white case is just as shimmery as the OEM white backplate. Hell, Spigen calls it "Shimmery White..." Oh and it's $9.99 right now.
http://www.amazon.com/Spigen®-Scree...=1406323636&sr=8-7&keywords=spigen+lg+g3+case
Click to expand...
Click to collapse
Wrong case, buddy
This is the actual white one:
http://www.amazon.com/Case-Spigen-S...=1406328645&sr=8-1&keywords=spigen+lg+g3+case
I, too have the case (in black), and I love it. I'm torn about the back, as i would like a bit more grip for when I put it on a smooth surface in the car so it won't slide around, but for my pocket, its awesome
bfern002 said:
Wrong case, buddy
This is the actual white one:
http://www.amazon.com/Case-Spigen-S...=1406328645&sr=8-1&keywords=spigen+lg+g3+case
I, too have the case (in black), and I love it. I'm torn about the back, as i would like a bit more grip for when I put it on a smooth surface in the car so it won't slide around, but for my pocket, its awesome
Click to expand...
Click to collapse
Ohh that one. I actually have that one too...LOL. I couldn't decide so I got both. AND then I saw the post for the OEM LG Slim Guard case (http://www.expansys-usa.com/lg-slim-guard-case-for-lg-g3-white-262017/) and bought that too. So now I'm going to have 3 cases and 2 OEM Qi enabled cases....:silly:
I have the charcoal one and love it! Back isn't slick to me...unlike the protection and slimness
I have the Spigen Slim Armor in Metal Slate and I'm extremely happy with it. Low profile, lightweight, and the cutouts are spot on.
I bought the Incipio Dual Pro case at the store when I got my G3, and I consider the Spigen to be much better. While the Dual Pro does seem to protect the phone very well, the ridges along the side are so high and protrude so far onto the face of the phone that it makes it nearly impossible to swipe from the left to access the menu in most apps. Even though I have huge hands, I find it a challenge to hit the upper left part of the screen with my right thumb on the G3, so using the swipe from the left side is essential to me. It's not an issue with the Spigen Slim Armor, as it does not extend far enough onto the face of the phone to get in the way. :good:
Which one of the Spigen's do you like better?
I'm also rocking this case.. overall i'm happy with it. Very slim and fits snuggly.
Only downfalls are the back is a little slick. not a big deal. Theirs not covers over the buttons, on my g2 I had a balistics case that covered the buttons which was nice. The only thing that really bothers me about this case is where the ubs and headphone jacks plug in. the edges on the case are somewhat sharp. I hold my phone in a way that it rests on my pinky finger, and its irritating to say the least. Maybe its just me and my big hands..
Just picked up this case as well as I can't stand the built in screen protector on my Supacase Beetle Unicorn due to the dead spots. So going naked for the screen, but will have this case on it. My wife has one on her g2 and always liked how it felt.
steber04 said:
I'm also rocking this case.. overall i'm happy with it. Very slim and fits snuggly.
Only downfalls are the back is a little slick. not a big deal. Theirs not covers over the buttons, on my g2 I had a balistics case that covered the buttons which was nice. The only thing that really bothers me about this case is where the ubs and headphone jacks plug in. the edges on the case are somewhat sharp. I hold my phone in a way that it rests on my pinky finger, and its irritating to say the least. Maybe its just me and my big hands..
Click to expand...
Click to collapse
I agree, Lil sharp on the pinky... Lol
How is the white color holding up. Every white case I have after a few weeks it turns brown or black. I cant stand it.
For the sharp edge on the pinky finger just get some 1000 grit sand paper and take the edge off. Helps a lot.
Sent from my VS980 4G using Tapatalk
steber04 said:
I'm also rocking this case.. overall i'm happy with it. Very slim and fits snuggly.
Only downfalls are the back is a little slick. not a big deal. Theirs not covers over the buttons, on my g2 I had a balistics case that covered the buttons which was nice. The only thing that really bothers me about this case is where the ubs and headphone jacks plug in. the edges on the case are somewhat sharp. I hold my phone in a way that it rests on my pinky finger, and its irritating to say the least. Maybe its just me and my big hands..
Click to expand...
Click to collapse
viskey said:
I agree, Lil sharp on the pinky... Lol
Click to expand...
Click to collapse
Oh, thank goodness it isn't just me! My pinky always finds the USB port hole, but I figure if it's anything like the Incipio case I had on my S4 it'll smooth itself out over time.
litrekid said:
For the sharp edge on the pinky finger just get some 1000 grit sand paper and take the edge off. Helps a lot.
Click to expand...
Click to collapse
That works too.
I just picked up one from amazon and I like it. I had the Best Buy one but I change cases like I change my shorts. I'll probably buy another one in the next few weeks for a different look.
Sent from my VZW LG G3 (tapatalk)
Had to send mine back because it kept coming off my phone
I have the SlimArmor in Blue
For me its slipperly and the back scracthes pretty easy
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
faded03cobra said:
Had to send mine back because it kept coming off my phone
Click to expand...
Click to collapse
Mines pulls away too. Thought it just was the way it was due to the screen getting so close to the edge and the case not having much to hold on to.
Great Protection BUT
I purchased the Slim Armor case. Really like the look and the fit (stays in place and doesn't cover the screen). My only issue is the depth of the power and volume keys. With the case, they are recessed almost 1/8th of an inch. This makes it harder to use both.
oo3 said:
Ohh that one. I actually have that one too...LOL. I couldn't decide so I got both. AND then I saw the post for the OEM LG Slim Guard case (http://www.expansys-usa.com/lg-slim-guard-case-for-lg-g3-white-262017/) and bought that too. So now I'm going to have 3 cases and 2 OEM Qi enabled cases....:silly:
Click to expand...
Click to collapse
Can you please post pics? That looks awesome!
Sent from my VS985 4G using Tapatalk
demill66 said:
I purchased the Slim Armor case. Really like the look and the fit (stays in place and doesn't cover the screen). My only issue is the depth of the power and volume keys. With the case, they are recessed almost 1/8th of an inch. This makes it harder to use both.
Click to expand...
Click to collapse
I disagree about the recessed buttons. I find it makes it very easy to find the buttons and avoid touching the camera lens. Also, I have long skinny fingers and am able to use the device comfortably with one hand. This phone isn't for people with small hands...
As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver